From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- scripts/generate_initcall_order.pl | 270 +++++++++++++++++++++++++++++++++++++ 1 file changed, 270 insertions(+) create mode 100755 scripts/generate_initcall_order.pl (limited to 'scripts/generate_initcall_order.pl') diff --git a/scripts/generate_initcall_order.pl b/scripts/generate_initcall_order.pl new file mode 100755 index 000000000..1a88d3f1b --- /dev/null +++ b/scripts/generate_initcall_order.pl @@ -0,0 +1,270 @@ +#!/usr/bin/env perl +# SPDX-License-Identifier: GPL-2.0 +# +# Generates a linker script that specifies the correct initcall order. +# +# Copyright (C) 2019 Google LLC + +use strict; +use warnings; +use IO::Handle; +use IO::Select; +use POSIX ":sys_wait_h"; + +my $nm = $ENV{'NM'} || die "$0: ERROR: NM not set?"; +my $objtree = $ENV{'objtree'} || '.'; + +## currently active child processes +my $jobs = {}; # child process pid -> file handle +## results from child processes +my $results = {}; # object index -> [ { level, secname }, ... ] + +## reads _NPROCESSORS_ONLN to determine the maximum number of processes to +## start +sub get_online_processors { + open(my $fh, "getconf _NPROCESSORS_ONLN 2>/dev/null |") + or die "$0: ERROR: failed to execute getconf: $!"; + my $procs = <$fh>; + close($fh); + + if (!($procs =~ /^\d+$/)) { + return 1; + } + + return int($procs); +} + +## writes results to the parent process +## format: +sub write_results { + my ($index, $initcalls) = @_; + + # sort by the counter value to ensure the order of initcalls within + # each object file is correct + foreach my $counter (sort { $a <=> $b } keys(%{$initcalls})) { + my $level = $initcalls->{$counter}->{'level'}; + + # section name for the initcall function + my $secname = $initcalls->{$counter}->{'module'} . '__' . + $counter . '_' . + $initcalls->{$counter}->{'line'} . '_' . + $initcalls->{$counter}->{'function'}; + + print "$index $level $secname\n"; + } +} + +## reads a result line from a child process and adds it to the $results array +sub read_results{ + my ($fh) = @_; + + # each child prints out a full line w/ autoflush and exits after the + # last line, so even if buffered I/O blocks here, it shouldn't block + # very long + my $data = <$fh>; + + if (!defined($data)) { + return 0; + } + + chomp($data); + + my ($index, $level, $secname) = $data =~ + /^(\d+)\ ([^\ ]+)\ (.*)$/; + + if (!defined($index) || + !defined($level) || + !defined($secname)) { + die "$0: ERROR: child process returned invalid data: $data\n"; + } + + $index = int($index); + + if (!exists($results->{$index})) { + $results->{$index} = []; + } + + push (@{$results->{$index}}, { + 'level' => $level, + 'secname' => $secname + }); + + return 1; +} + +## finds initcalls from an object file or all object files in an archive, and +## writes results back to the parent process +sub find_initcalls { + my ($index, $file) = @_; + + die "$0: ERROR: file $file doesn't exist?" if (! -f $file); + + open(my $fh, "\"$nm\" --defined-only \"$file\" 2>/dev/null |") + or die "$0: ERROR: failed to execute \"$nm\": $!"; + + my $initcalls = {}; + + while (<$fh>) { + chomp; + + # check for the start of a new object file (if processing an + # archive) + my ($path)= $_ =~ /^(.+)\:$/; + + if (defined($path)) { + write_results($index, $initcalls); + $initcalls = {}; + next; + } + + # look for an initcall + my ($module, $counter, $line, $symbol) = $_ =~ + /[a-z]\s+__initcall__(\S*)__(\d+)_(\d+)_(.*)$/; + + if (!defined($module)) { + $module = '' + } + + if (!defined($counter) || + !defined($line) || + !defined($symbol)) { + next; + } + + # parse initcall level + my ($function, $level) = $symbol =~ + /^(.*)((early|rootfs|con|[0-9])s?)$/; + + die "$0: ERROR: invalid initcall name $symbol in $file($path)" + if (!defined($function) || !defined($level)); + + $initcalls->{$counter} = { + 'module' => $module, + 'line' => $line, + 'function' => $function, + 'level' => $level, + }; + } + + close($fh); + write_results($index, $initcalls); +} + +## waits for any child process to complete, reads the results, and adds them to +## the $results array for later processing +sub wait_for_results { + my ($select) = @_; + + my $pid = 0; + do { + # unblock children that may have a full write buffer + foreach my $fh ($select->can_read(0)) { + read_results($fh); + } + + # check for children that have exited, read the remaining data + # from them, and clean up + $pid = waitpid(-1, WNOHANG); + if ($pid > 0) { + if (!exists($jobs->{$pid})) { + next; + } + + my $fh = $jobs->{$pid}; + $select->remove($fh); + + while (read_results($fh)) { + # until eof + } + + close($fh); + delete($jobs->{$pid}); + } + } while ($pid > 0); +} + +## forks a child to process each file passed in the command line and collects +## the results +sub process_files { + my $index = 0; + my $njobs = $ENV{'PARALLELISM'} || get_online_processors(); + my $select = IO::Select->new(); + + while (my $file = shift(@ARGV)) { + # fork a child process and read it's stdout + my $pid = open(my $fh, '-|'); + + if (!defined($pid)) { + die "$0: ERROR: failed to fork: $!"; + } elsif ($pid) { + # save the child process pid and the file handle + $select->add($fh); + $jobs->{$pid} = $fh; + } else { + # in the child process + STDOUT->autoflush(1); + find_initcalls($index, "$objtree/$file"); + exit; + } + + $index++; + + # limit the number of children to $njobs + if (scalar(keys(%{$jobs})) >= $njobs) { + wait_for_results($select); + } + } + + # wait for the remaining children to complete + while (scalar(keys(%{$jobs})) > 0) { + wait_for_results($select); + } +} + +sub generate_initcall_lds() { + process_files(); + + my $sections = {}; # level -> [ secname, ...] + + # sort results to retain link order and split to sections per + # initcall level + foreach my $index (sort { $a <=> $b } keys(%{$results})) { + foreach my $result (@{$results->{$index}}) { + my $level = $result->{'level'}; + + if (!exists($sections->{$level})) { + $sections->{$level} = []; + } + + push(@{$sections->{$level}}, $result->{'secname'}); + } + } + + die "$0: ERROR: no initcalls?" if (!keys(%{$sections})); + + # print out a linker script that defines the order of initcalls for + # each level + print "SECTIONS {\n"; + + foreach my $level (sort(keys(%{$sections}))) { + my $section; + + if ($level eq 'con') { + $section = '.con_initcall.init'; + } else { + $section = ".initcall${level}.init"; + } + + print "\t${section} : {\n"; + + foreach my $secname (@{$sections->{$level}}) { + print "\t\t*(${section}..${secname}) ;\n"; + } + + print "\t}\n"; + } + + print "}\n"; +} + +generate_initcall_lds(); -- cgit v1.2.3