From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- security/apparmor/Makefile | 114 +++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 114 insertions(+) create mode 100644 security/apparmor/Makefile (limited to 'security/apparmor/Makefile') diff --git a/security/apparmor/Makefile b/security/apparmor/Makefile new file mode 100644 index 000000000..b9c5879dd --- /dev/null +++ b/security/apparmor/Makefile @@ -0,0 +1,114 @@ +# SPDX-License-Identifier: GPL-2.0 +# Makefile for AppArmor Linux Security Module +# +obj-$(CONFIG_SECURITY_APPARMOR) += apparmor.o + +apparmor-y := apparmorfs.o audit.o capability.o task.o ipc.o lib.o match.o \ + path.o domain.o policy.o policy_unpack.o procattr.o lsm.o \ + resource.o secid.o file.o policy_ns.o label.o mount.o net.o \ + policy_compat.o +apparmor-$(CONFIG_SECURITY_APPARMOR_HASH) += crypto.o + +obj-$(CONFIG_SECURITY_APPARMOR_KUNIT_TEST) += apparmor_policy_unpack_test.o +apparmor_policy_unpack_test-objs += policy_unpack_test.o + +clean-files := capability_names.h rlim_names.h net_names.h + +# Build a lower case string table of address family names +# Transform lines from +# #define AF_LOCAL 1 /* POSIX name for AF_UNIX */ +# #define AF_INET 2 /* Internet IP Protocol */ +# to +# [1] = "local", +# [2] = "inet", +# +# and build the securityfs entries for the mapping. +# Transforms lines from +# #define AF_INET 2 /* Internet IP Protocol */ +# to +# #define AA_SFS_AF_MASK "local inet" +quiet_cmd_make-af = GEN $@ +cmd_make-af = echo "static const char *address_family_names[] = {" > $@ ;\ + sed $< >>$@ -r -n -e "/AF_MAX/d" -e "/AF_LOCAL/d" -e "/AF_ROUTE/d" -e \ + 's/^\#define[ \t]+AF_([A-Z0-9_]+)[ \t]+([0-9]+)(.*)/[\2] = "\L\1",/p';\ + echo "};" >> $@ ;\ + printf '%s' '\#define AA_SFS_AF_MASK "' >> $@ ;\ + sed -r -n -e "/AF_MAX/d" -e "/AF_LOCAL/d" -e "/AF_ROUTE/d" -e \ + 's/^\#define[ \t]+AF_([A-Z0-9_]+)[ \t]+([0-9]+)(.*)/\L\1/p'\ + $< | tr '\n' ' ' | sed -e 's/ $$/"\n/' >> $@ + +# Build a lower case string table of sock type names +# Transform lines from +# SOCK_STREAM = 1, +# to +# [1] = "stream", +quiet_cmd_make-sock = GEN $@ +cmd_make-sock = echo "static const char *sock_type_names[] = {" >> $@ ;\ + sed $^ >>$@ -r -n \ + -e 's/^\tSOCK_([A-Z0-9_]+)[\t]+=[ \t]+([0-9]+)(.*)/[\2] = "\L\1",/p';\ + echo "};" >> $@ + +# Build a lower case string table of capability names +# Transforms lines from +# #define CAP_DAC_OVERRIDE 1 +# to +# [1] = "dac_override", +quiet_cmd_make-caps = GEN $@ +cmd_make-caps = echo "static const char *const capability_names[] = {" > $@ ;\ + sed $< >>$@ -r -n -e '/CAP_FS_MASK/d' \ + -e 's/^\#define[ \t]+CAP_([A-Z0-9_]+)[ \t]+([0-9]+)/[\2] = "\L\1",/p';\ + echo "};" >> $@ ;\ + printf '%s' '\#define AA_SFS_CAPS_MASK "' >> $@ ;\ + sed $< -r -n -e '/CAP_FS_MASK/d' \ + -e 's/^\#define[ \t]+CAP_([A-Z0-9_]+)[ \t]+([0-9]+)/\L\1/p' | \ + tr '\n' ' ' | sed -e 's/ $$/"\n/' >> $@ + + +# Build a lower case string table of rlimit names. +# Transforms lines from +# #define RLIMIT_STACK 3 /* max stack size */ +# to +# [RLIMIT_STACK] = "stack", +# +# and build a second integer table (with the second sed cmd), that maps +# RLIMIT defines to the order defined in asm-generic/resource.h This is +# required by policy load to map policy ordering of RLIMITs to internal +# ordering for architectures that redefine an RLIMIT. +# Transforms lines from +# #define RLIMIT_STACK 3 /* max stack size */ +# to +# RLIMIT_STACK, +# +# and build the securityfs entries for the mapping. +# Transforms lines from +# #define RLIMIT_FSIZE 1 /* Maximum filesize */ +# #define RLIMIT_STACK 3 /* max stack size */ +# to +# #define AA_SFS_RLIMIT_MASK "fsize stack" +quiet_cmd_make-rlim = GEN $@ +cmd_make-rlim = echo "static const char *const rlim_names[RLIM_NLIMITS] = {" \ + > $@ ;\ + sed $< >> $@ -r -n \ + -e 's/^\# ?define[ \t]+(RLIMIT_([A-Z0-9_]+)).*/[\1] = "\L\2",/p';\ + echo "};" >> $@ ;\ + echo "static const int rlim_map[RLIM_NLIMITS] = {" >> $@ ;\ + sed -r -n "s/^\# ?define[ \t]+(RLIMIT_[A-Z0-9_]+).*/\1,/p" $< >> $@ ;\ + echo "};" >> $@ ; \ + printf '%s' '\#define AA_SFS_RLIMIT_MASK "' >> $@ ;\ + sed -r -n 's/^\# ?define[ \t]+RLIMIT_([A-Z0-9_]+).*/\L\1/p' $< | \ + tr '\n' ' ' | sed -e 's/ $$/"\n/' >> $@ + +$(obj)/capability.o : $(obj)/capability_names.h +$(obj)/net.o : $(obj)/net_names.h +$(obj)/resource.o : $(obj)/rlim_names.h +$(obj)/capability_names.h : $(srctree)/include/uapi/linux/capability.h \ + $(src)/Makefile + $(call cmd,make-caps) +$(obj)/rlim_names.h : $(srctree)/include/uapi/asm-generic/resource.h \ + $(src)/Makefile + $(call cmd,make-rlim) +$(obj)/net_names.h : $(srctree)/include/linux/socket.h \ + $(srctree)/include/linux/net.h \ + $(src)/Makefile + $(call cmd,make-af) + $(call cmd,make-sock) -- cgit v1.2.3