From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- security/apparmor/include/match.h | 196 ++++++++++++++++++++++++++++++++++++++ 1 file changed, 196 insertions(+) create mode 100644 security/apparmor/include/match.h (limited to 'security/apparmor/include/match.h') diff --git a/security/apparmor/include/match.h b/security/apparmor/include/match.h new file mode 100644 index 000000000..58fbf6713 --- /dev/null +++ b/security/apparmor/include/match.h @@ -0,0 +1,196 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* + * AppArmor security module + * + * This file contains AppArmor policy dfa matching engine definitions. + * + * Copyright (C) 1998-2008 Novell/SUSE + * Copyright 2009-2012 Canonical Ltd. + */ + +#ifndef __AA_MATCH_H +#define __AA_MATCH_H + +#include + +#define DFA_NOMATCH 0 +#define DFA_START 1 + + +/** + * The format used for transition tables is based on the GNU flex table + * file format (--tables-file option; see Table File Format in the flex + * info pages and the flex sources for documentation). The magic number + * used in the header is 0x1B5E783D instead of 0xF13C57B1 though, because + * new tables have been defined and others YY_ID_CHK (check) and YY_ID_DEF + * (default) tables are used slightly differently (see the apparmor-parser + * package). + * + * + * The data in the packed dfa is stored in network byte order, and the tables + * are arranged for flexibility. We convert the table data to host native + * byte order. + * + * The dfa begins with a table set header, and is followed by the actual + * tables. + */ + +#define YYTH_MAGIC 0x1B5E783D +#define YYTH_FLAG_DIFF_ENCODE 1 +#define YYTH_FLAG_OOB_TRANS 2 +#define YYTH_FLAGS (YYTH_FLAG_DIFF_ENCODE | YYTH_FLAG_OOB_TRANS) + +#define MAX_OOB_SUPPORTED 1 + +struct table_set_header { + u32 th_magic; /* YYTH_MAGIC */ + u32 th_hsize; + u32 th_ssize; + u16 th_flags; + char th_version[]; +}; + +/* The YYTD_ID are one less than flex table mappings. The flex id + * has 1 subtracted at table load time, this allows us to directly use the + * ID's as indexes. + */ +#define YYTD_ID_ACCEPT 0 +#define YYTD_ID_BASE 1 +#define YYTD_ID_CHK 2 +#define YYTD_ID_DEF 3 +#define YYTD_ID_EC 4 +#define YYTD_ID_META 5 +#define YYTD_ID_ACCEPT2 6 +#define YYTD_ID_NXT 7 +#define YYTD_ID_TSIZE 8 +#define YYTD_ID_MAX 8 + +#define YYTD_DATA8 1 +#define YYTD_DATA16 2 +#define YYTD_DATA32 4 +#define YYTD_DATA64 8 + +/* ACCEPT & ACCEPT2 tables gets 6 dedicated flags, YYTD_DATAX define the + * first flags + */ +#define ACCEPT1_FLAGS(X) ((X) & 0x3f) +#define ACCEPT2_FLAGS(X) ACCEPT1_FLAGS((X) >> YYTD_ID_ACCEPT2) +#define TO_ACCEPT1_FLAG(X) ACCEPT1_FLAGS(X) +#define TO_ACCEPT2_FLAG(X) (ACCEPT1_FLAGS(X) << YYTD_ID_ACCEPT2) +#define DFA_FLAG_VERIFY_STATES 0x1000 + +struct table_header { + u16 td_id; + u16 td_flags; + u32 td_hilen; + u32 td_lolen; + char td_data[]; +}; + +#define DEFAULT_TABLE(DFA) ((u16 *)((DFA)->tables[YYTD_ID_DEF]->td_data)) +#define BASE_TABLE(DFA) ((u32 *)((DFA)->tables[YYTD_ID_BASE]->td_data)) +#define NEXT_TABLE(DFA) ((u16 *)((DFA)->tables[YYTD_ID_NXT]->td_data)) +#define CHECK_TABLE(DFA) ((u16 *)((DFA)->tables[YYTD_ID_CHK]->td_data)) +#define EQUIV_TABLE(DFA) ((u8 *)((DFA)->tables[YYTD_ID_EC]->td_data)) +#define ACCEPT_TABLE(DFA) ((u32 *)((DFA)->tables[YYTD_ID_ACCEPT]->td_data)) +#define ACCEPT_TABLE2(DFA) ((u32 *)((DFA)->tables[YYTD_ID_ACCEPT2]->td_data)) + +struct aa_dfa { + struct kref count; + u16 flags; + u32 max_oob; + struct table_header *tables[YYTD_ID_TSIZE]; +}; + +extern struct aa_dfa *nulldfa; +extern struct aa_dfa *stacksplitdfa; + +#define byte_to_byte(X) (X) + +#define UNPACK_ARRAY(TABLE, BLOB, LEN, TTYPE, BTYPE, NTOHX) \ + do { \ + typeof(LEN) __i; \ + TTYPE *__t = (TTYPE *) TABLE; \ + BTYPE *__b = (BTYPE *) BLOB; \ + for (__i = 0; __i < LEN; __i++) { \ + __t[__i] = NTOHX(__b[__i]); \ + } \ + } while (0) + +static inline size_t table_size(size_t len, size_t el_size) +{ + return ALIGN(sizeof(struct table_header) + len * el_size, 8); +} + +int aa_setup_dfa_engine(void); +void aa_teardown_dfa_engine(void); + +#define aa_state_t unsigned int + +struct aa_dfa *aa_dfa_unpack(void *blob, size_t size, int flags); +aa_state_t aa_dfa_match_len(struct aa_dfa *dfa, aa_state_t start, + const char *str, int len); +aa_state_t aa_dfa_match(struct aa_dfa *dfa, aa_state_t start, + const char *str); +aa_state_t aa_dfa_next(struct aa_dfa *dfa, aa_state_t state, const char c); +aa_state_t aa_dfa_outofband_transition(struct aa_dfa *dfa, aa_state_t state); +aa_state_t aa_dfa_match_until(struct aa_dfa *dfa, aa_state_t start, + const char *str, const char **retpos); +aa_state_t aa_dfa_matchn_until(struct aa_dfa *dfa, aa_state_t start, + const char *str, int n, const char **retpos); + +void aa_dfa_free_kref(struct kref *kref); + +#define WB_HISTORY_SIZE 24 +struct match_workbuf { + unsigned int count; + unsigned int pos; + unsigned int len; + unsigned int size; /* power of 2, same as history size */ + unsigned int history[WB_HISTORY_SIZE]; +}; +#define DEFINE_MATCH_WB(N) \ +struct match_workbuf N = { \ + .count = 0, \ + .pos = 0, \ + .len = 0, \ +} + +aa_state_t aa_dfa_leftmatch(struct aa_dfa *dfa, aa_state_t start, + const char *str, unsigned int *count); + +/** + * aa_get_dfa - increment refcount on dfa @p + * @dfa: dfa (MAYBE NULL) + * + * Returns: pointer to @dfa if @dfa is NULL will return NULL + * Requires: @dfa must be held with valid refcount when called + */ +static inline struct aa_dfa *aa_get_dfa(struct aa_dfa *dfa) +{ + if (dfa) + kref_get(&(dfa->count)); + + return dfa; +} + +/** + * aa_put_dfa - put a dfa refcount + * @dfa: dfa to put refcount (MAYBE NULL) + * + * Requires: if @dfa != NULL that a valid refcount be held + */ +static inline void aa_put_dfa(struct aa_dfa *dfa) +{ + if (dfa) + kref_put(&dfa->count, aa_dfa_free_kref); +} + +#define MATCH_FLAG_DIFF_ENCODE 0x80000000 +#define MARK_DIFF_ENCODE 0x40000000 +#define MATCH_FLAG_OOB_TRANSITION 0x20000000 +#define MATCH_FLAGS_MASK 0xff000000 +#define MATCH_FLAGS_VALID (MATCH_FLAG_DIFF_ENCODE | MATCH_FLAG_OOB_TRANSITION) +#define MATCH_FLAGS_INVALID (MATCH_FLAGS_MASK & ~MATCH_FLAGS_VALID) + +#endif /* __AA_MATCH_H */ -- cgit v1.2.3