From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- security/integrity/ima/Kconfig | 340 +++++++++++++++++++++++++++++++++++++++++ 1 file changed, 340 insertions(+) create mode 100644 security/integrity/ima/Kconfig (limited to 'security/integrity/ima/Kconfig') diff --git a/security/integrity/ima/Kconfig b/security/integrity/ima/Kconfig new file mode 100644 index 000000000..39caeca47 --- /dev/null +++ b/security/integrity/ima/Kconfig @@ -0,0 +1,340 @@ +# SPDX-License-Identifier: GPL-2.0-only +# IBM Integrity Measurement Architecture +# +config IMA + bool "Integrity Measurement Architecture(IMA)" + select SECURITYFS + select CRYPTO + select CRYPTO_HMAC + select CRYPTO_SHA1 + select CRYPTO_HASH_INFO + select TCG_TPM if HAS_IOMEM && !UML + select TCG_TIS if TCG_TPM && X86 + select TCG_CRB if TCG_TPM && ACPI + select TCG_IBMVTPM if TCG_TPM && PPC_PSERIES + select INTEGRITY_AUDIT if AUDIT + help + The Trusted Computing Group(TCG) runtime Integrity + Measurement Architecture(IMA) maintains a list of hash + values of executables and other sensitive system files, + as they are read or executed. If an attacker manages + to change the contents of an important system file + being measured, we can tell. + + If your system has a TPM chip, then IMA also maintains + an aggregate integrity value over this list inside the + TPM hardware, so that the TPM can prove to a third party + whether or not critical system files have been modified. + Read + to learn more about IMA. + If unsure, say N. + +config IMA_KEXEC + bool "Enable carrying the IMA measurement list across a soft boot" + depends on IMA && TCG_TPM && HAVE_IMA_KEXEC + default n + help + TPM PCRs are only reset on a hard reboot. In order to validate + a TPM's quote after a soft boot, the IMA measurement list of the + running kernel must be saved and restored on boot. + + Depending on the IMA policy, the measurement list can grow to + be very large. + +config IMA_MEASURE_PCR_IDX + int + depends on IMA + range 8 14 + default 10 + help + IMA_MEASURE_PCR_IDX determines the TPM PCR register index + that IMA uses to maintain the integrity aggregate of the + measurement list. If unsure, use the default 10. + +config IMA_LSM_RULES + bool + depends on IMA && AUDIT && (SECURITY_SELINUX || SECURITY_SMACK || SECURITY_APPARMOR) + default y + help + Disabling this option will disregard LSM based policy rules. + +choice + prompt "Default template" + default IMA_NG_TEMPLATE + depends on IMA + help + Select the default IMA measurement template. + + The original 'ima' measurement list template contains a + hash, defined as 20 bytes, and a null terminated pathname, + limited to 255 characters. The 'ima-ng' measurement list + template permits both larger hash digests and longer + pathnames. The configured default template can be replaced + by specifying "ima_template=" on the boot command line. + + config IMA_NG_TEMPLATE + bool "ima-ng (default)" + config IMA_SIG_TEMPLATE + bool "ima-sig" +endchoice + +config IMA_DEFAULT_TEMPLATE + string + depends on IMA + default "ima-ng" if IMA_NG_TEMPLATE + default "ima-sig" if IMA_SIG_TEMPLATE + +choice + prompt "Default integrity hash algorithm" + default IMA_DEFAULT_HASH_SHA1 + depends on IMA + help + Select the default hash algorithm used for the measurement + list, integrity appraisal and audit log. The compiled default + hash algorithm can be overwritten using the kernel command + line 'ima_hash=' option. + + config IMA_DEFAULT_HASH_SHA1 + bool "SHA1 (default)" + depends on CRYPTO_SHA1=y + + config IMA_DEFAULT_HASH_SHA256 + bool "SHA256" + depends on CRYPTO_SHA256=y + + config IMA_DEFAULT_HASH_SHA512 + bool "SHA512" + depends on CRYPTO_SHA512=y + + config IMA_DEFAULT_HASH_WP512 + bool "WP512" + depends on CRYPTO_WP512=y + + config IMA_DEFAULT_HASH_SM3 + bool "SM3" + depends on CRYPTO_SM3_GENERIC=y +endchoice + +config IMA_DEFAULT_HASH + string + depends on IMA + default "sha1" if IMA_DEFAULT_HASH_SHA1 + default "sha256" if IMA_DEFAULT_HASH_SHA256 + default "sha512" if IMA_DEFAULT_HASH_SHA512 + default "wp512" if IMA_DEFAULT_HASH_WP512 + default "sm3" if IMA_DEFAULT_HASH_SM3 + +config IMA_WRITE_POLICY + bool "Enable multiple writes to the IMA policy" + depends on IMA + default n + help + IMA policy can now be updated multiple times. The new rules get + appended to the original policy. Have in mind that the rules are + scanned in FIFO order so be careful when you design and add new ones. + + If unsure, say N. + +config IMA_READ_POLICY + bool "Enable reading back the current IMA policy" + depends on IMA + default y if IMA_WRITE_POLICY + default n if !IMA_WRITE_POLICY + help + It is often useful to be able to read back the IMA policy. It is + even more important after introducing CONFIG_IMA_WRITE_POLICY. + This option allows the root user to see the current policy rules. + +config IMA_APPRAISE + bool "Appraise integrity measurements" + depends on IMA + default n + help + This option enables local measurement integrity appraisal. + It requires the system to be labeled with a security extended + attribute containing the file hash measurement. To protect + the security extended attributes from offline attack, enable + and configure EVM. + + For more information on integrity appraisal refer to: + + If unsure, say N. + +config IMA_ARCH_POLICY + bool "Enable loading an IMA architecture specific policy" + depends on (KEXEC_SIG && IMA) || IMA_APPRAISE \ + && INTEGRITY_ASYMMETRIC_KEYS + default n + help + This option enables loading an IMA architecture specific policy + based on run time secure boot flags. + +config IMA_APPRAISE_BUILD_POLICY + bool "IMA build time configured policy rules" + depends on IMA_APPRAISE && INTEGRITY_ASYMMETRIC_KEYS + default n + help + This option defines an IMA appraisal policy at build time, which + is enforced at run time without having to specify a builtin + policy name on the boot command line. The build time appraisal + policy rules persist after loading a custom policy. + + Depending on the rules configured, this policy may require kernel + modules, firmware, the kexec kernel image, and/or the IMA policy + to be signed. Unsigned files might prevent the system from + booting or applications from working properly. + +config IMA_APPRAISE_REQUIRE_FIRMWARE_SIGS + bool "Appraise firmware signatures" + depends on IMA_APPRAISE_BUILD_POLICY + default n + help + This option defines a policy requiring all firmware to be signed, + including the regulatory.db. If both this option and + CFG80211_REQUIRE_SIGNED_REGDB are enabled, then both signature + verification methods are necessary. + +config IMA_APPRAISE_REQUIRE_KEXEC_SIGS + bool "Appraise kexec kernel image signatures" + depends on IMA_APPRAISE_BUILD_POLICY + default n + help + Enabling this rule will require all kexec'ed kernel images to + be signed and verified by a public key on the trusted IMA + keyring. + + Kernel image signatures can not be verified by the original + kexec_load syscall. Enabling this rule will prevent its + usage. + +config IMA_APPRAISE_REQUIRE_MODULE_SIGS + bool "Appraise kernel modules signatures" + depends on IMA_APPRAISE_BUILD_POLICY + default n + help + Enabling this rule will require all kernel modules to be signed + and verified by a public key on the trusted IMA keyring. + + Kernel module signatures can only be verified by IMA-appraisal, + via the finit_module syscall. Enabling this rule will prevent + the usage of the init_module syscall. + +config IMA_APPRAISE_REQUIRE_POLICY_SIGS + bool "Appraise IMA policy signature" + depends on IMA_APPRAISE_BUILD_POLICY + default n + help + Enabling this rule will require the IMA policy to be signed and + and verified by a key on the trusted IMA keyring. + +config IMA_APPRAISE_BOOTPARAM + bool "ima_appraise boot parameter" + depends on IMA_APPRAISE + default y + help + This option enables the different "ima_appraise=" modes + (eg. fix, log) from the boot command line. + +config IMA_APPRAISE_MODSIG + bool "Support module-style signatures for appraisal" + depends on IMA_APPRAISE + depends on INTEGRITY_ASYMMETRIC_KEYS + select PKCS7_MESSAGE_PARSER + select MODULE_SIG_FORMAT + default n + help + Adds support for signatures appended to files. The format of the + appended signature is the same used for signed kernel modules. + The modsig keyword can be used in the IMA policy to allow a hook + to accept such signatures. + +config IMA_TRUSTED_KEYRING + bool "Require all keys on the .ima keyring be signed (deprecated)" + depends on IMA_APPRAISE && SYSTEM_TRUSTED_KEYRING + depends on INTEGRITY_ASYMMETRIC_KEYS + select INTEGRITY_TRUSTED_KEYRING + default y + help + This option requires that all keys added to the .ima + keyring be signed by a key on the system trusted keyring. + + This option is deprecated in favor of INTEGRITY_TRUSTED_KEYRING + +config IMA_KEYRINGS_PERMIT_SIGNED_BY_BUILTIN_OR_SECONDARY + bool "Permit keys validly signed by a built-in or secondary CA cert (EXPERIMENTAL)" + depends on SYSTEM_TRUSTED_KEYRING + depends on SECONDARY_TRUSTED_KEYRING + depends on INTEGRITY_ASYMMETRIC_KEYS + select INTEGRITY_TRUSTED_KEYRING + default n + help + Keys may be added to the IMA or IMA blacklist keyrings, if the + key is validly signed by a CA cert in the system built-in or + secondary trusted keyrings. + + Intermediate keys between those the kernel has compiled in and the + IMA keys to be added may be added to the system secondary keyring, + provided they are validly signed by a key already resident in the + built-in or secondary trusted keyrings. + +config IMA_BLACKLIST_KEYRING + bool "Create IMA machine owner blacklist keyrings (EXPERIMENTAL)" + depends on SYSTEM_TRUSTED_KEYRING + depends on IMA_TRUSTED_KEYRING + default n + help + This option creates an IMA blacklist keyring, which contains all + revoked IMA keys. It is consulted before any other keyring. If + the search is successful the requested operation is rejected and + an error is returned to the caller. + +config IMA_LOAD_X509 + bool "Load X509 certificate onto the '.ima' trusted keyring" + depends on IMA_TRUSTED_KEYRING + default n + help + File signature verification is based on the public keys + loaded on the .ima trusted keyring. These public keys are + X509 certificates signed by a trusted key on the + .system keyring. This option enables X509 certificate + loading from the kernel onto the '.ima' trusted keyring. + +config IMA_X509_PATH + string "IMA X509 certificate path" + depends on IMA_LOAD_X509 + default "/etc/keys/x509_ima.der" + help + This option defines IMA X509 certificate path. + +config IMA_APPRAISE_SIGNED_INIT + bool "Require signed user-space initialization" + depends on IMA_LOAD_X509 + default n + help + This option requires user-space init to be signed. + +config IMA_MEASURE_ASYMMETRIC_KEYS + bool + depends on IMA + depends on ASYMMETRIC_PUBLIC_KEY_SUBTYPE=y + default y + +config IMA_QUEUE_EARLY_BOOT_KEYS + bool + depends on IMA_MEASURE_ASYMMETRIC_KEYS + depends on SYSTEM_TRUSTED_KEYRING + default y + +config IMA_SECURE_AND_OR_TRUSTED_BOOT + bool + depends on IMA_ARCH_POLICY + help + This option is selected by architectures to enable secure and/or + trusted boot based on IMA runtime policies. + +config IMA_DISABLE_HTABLE + bool "Disable htable to allow measurement of duplicate records" + depends on IMA + default n + help + This option disables htable to allow measurement of duplicate records. -- cgit v1.2.3