From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- sound/aoa/fabrics/layout.c | 1180 ++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 1180 insertions(+) create mode 100644 sound/aoa/fabrics/layout.c (limited to 'sound/aoa/fabrics/layout.c') diff --git a/sound/aoa/fabrics/layout.c b/sound/aoa/fabrics/layout.c new file mode 100644 index 000000000..ec4ef1855 --- /dev/null +++ b/sound/aoa/fabrics/layout.c @@ -0,0 +1,1180 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Apple Onboard Audio driver -- layout/machine id fabric + * + * Copyright 2006-2008 Johannes Berg + * + * This fabric module looks for sound codecs based on the + * layout-id or device-id property in the device tree. + */ +#include +#include +#include +#include +#include "../aoa.h" +#include "../soundbus/soundbus.h" + +MODULE_AUTHOR("Johannes Berg "); +MODULE_LICENSE("GPL"); +MODULE_DESCRIPTION("Layout-ID fabric for snd-aoa"); + +#define MAX_CODECS_PER_BUS 2 + +/* These are the connections the layout fabric + * knows about. It doesn't really care about the + * input ones, but I thought I'd separate them + * to give them proper names. The thing is that + * Apple usually will distinguish the active output + * by GPIOs, while the active input is set directly + * on the codec. Hence we here tell the codec what + * we think is connected. This information is hard- + * coded below ... */ +#define CC_SPEAKERS (1<<0) +#define CC_HEADPHONE (1<<1) +#define CC_LINEOUT (1<<2) +#define CC_DIGITALOUT (1<<3) +#define CC_LINEIN (1<<4) +#define CC_MICROPHONE (1<<5) +#define CC_DIGITALIN (1<<6) +/* pretty bogus but users complain... + * This is a flag saying that the LINEOUT + * should be renamed to HEADPHONE. + * be careful with input detection! */ +#define CC_LINEOUT_LABELLED_HEADPHONE (1<<7) + +struct codec_connection { + /* CC_ flags from above */ + int connected; + /* codec dependent bit to be set in the aoa_codec.connected field. + * This intentionally doesn't have any generic flags because the + * fabric has to know the codec anyway and all codecs might have + * different connectors */ + int codec_bit; +}; + +struct codec_connect_info { + char *name; + struct codec_connection *connections; +}; + +#define LAYOUT_FLAG_COMBO_LINEOUT_SPDIF (1<<0) + +struct layout { + unsigned int layout_id, device_id; + struct codec_connect_info codecs[MAX_CODECS_PER_BUS]; + int flags; + + /* if busname is not assigned, we use 'Master' below, + * so that our layout table doesn't need to be filled + * too much. + * We only assign these two if we expect to find more + * than one soundbus, i.e. on those machines with + * multiple layout-ids */ + char *busname; + int pcmid; +}; + +MODULE_ALIAS("sound-layout-36"); +MODULE_ALIAS("sound-layout-41"); +MODULE_ALIAS("sound-layout-45"); +MODULE_ALIAS("sound-layout-47"); +MODULE_ALIAS("sound-layout-48"); +MODULE_ALIAS("sound-layout-49"); +MODULE_ALIAS("sound-layout-50"); +MODULE_ALIAS("sound-layout-51"); +MODULE_ALIAS("sound-layout-56"); +MODULE_ALIAS("sound-layout-57"); +MODULE_ALIAS("sound-layout-58"); +MODULE_ALIAS("sound-layout-60"); +MODULE_ALIAS("sound-layout-61"); +MODULE_ALIAS("sound-layout-62"); +MODULE_ALIAS("sound-layout-64"); +MODULE_ALIAS("sound-layout-65"); +MODULE_ALIAS("sound-layout-66"); +MODULE_ALIAS("sound-layout-67"); +MODULE_ALIAS("sound-layout-68"); +MODULE_ALIAS("sound-layout-69"); +MODULE_ALIAS("sound-layout-70"); +MODULE_ALIAS("sound-layout-72"); +MODULE_ALIAS("sound-layout-76"); +MODULE_ALIAS("sound-layout-80"); +MODULE_ALIAS("sound-layout-82"); +MODULE_ALIAS("sound-layout-84"); +MODULE_ALIAS("sound-layout-86"); +MODULE_ALIAS("sound-layout-90"); +MODULE_ALIAS("sound-layout-92"); +MODULE_ALIAS("sound-layout-94"); +MODULE_ALIAS("sound-layout-96"); +MODULE_ALIAS("sound-layout-98"); +MODULE_ALIAS("sound-layout-100"); + +MODULE_ALIAS("aoa-device-id-14"); +MODULE_ALIAS("aoa-device-id-22"); +MODULE_ALIAS("aoa-device-id-31"); +MODULE_ALIAS("aoa-device-id-35"); +MODULE_ALIAS("aoa-device-id-44"); + +/* onyx with all but microphone connected */ +static struct codec_connection onyx_connections_nomic[] = { + { + .connected = CC_SPEAKERS | CC_HEADPHONE | CC_LINEOUT, + .codec_bit = 0, + }, + { + .connected = CC_DIGITALOUT, + .codec_bit = 1, + }, + { + .connected = CC_LINEIN, + .codec_bit = 2, + }, + {} /* terminate array by .connected == 0 */ +}; + +/* onyx on machines without headphone */ +static struct codec_connection onyx_connections_noheadphones[] = { + { + .connected = CC_SPEAKERS | CC_LINEOUT | + CC_LINEOUT_LABELLED_HEADPHONE, + .codec_bit = 0, + }, + { + .connected = CC_DIGITALOUT, + .codec_bit = 1, + }, + /* FIXME: are these correct? probably not for all the machines + * below ... If not this will need separating. */ + { + .connected = CC_LINEIN, + .codec_bit = 2, + }, + { + .connected = CC_MICROPHONE, + .codec_bit = 3, + }, + {} /* terminate array by .connected == 0 */ +}; + +/* onyx on machines with real line-out */ +static struct codec_connection onyx_connections_reallineout[] = { + { + .connected = CC_SPEAKERS | CC_LINEOUT | CC_HEADPHONE, + .codec_bit = 0, + }, + { + .connected = CC_DIGITALOUT, + .codec_bit = 1, + }, + { + .connected = CC_LINEIN, + .codec_bit = 2, + }, + {} /* terminate array by .connected == 0 */ +}; + +/* tas on machines without line out */ +static struct codec_connection tas_connections_nolineout[] = { + { + .connected = CC_SPEAKERS | CC_HEADPHONE, + .codec_bit = 0, + }, + { + .connected = CC_LINEIN, + .codec_bit = 2, + }, + { + .connected = CC_MICROPHONE, + .codec_bit = 3, + }, + {} /* terminate array by .connected == 0 */ +}; + +/* tas on machines with neither line out nor line in */ +static struct codec_connection tas_connections_noline[] = { + { + .connected = CC_SPEAKERS | CC_HEADPHONE, + .codec_bit = 0, + }, + { + .connected = CC_MICROPHONE, + .codec_bit = 3, + }, + {} /* terminate array by .connected == 0 */ +}; + +/* tas on machines without microphone */ +static struct codec_connection tas_connections_nomic[] = { + { + .connected = CC_SPEAKERS | CC_HEADPHONE | CC_LINEOUT, + .codec_bit = 0, + }, + { + .connected = CC_LINEIN, + .codec_bit = 2, + }, + {} /* terminate array by .connected == 0 */ +}; + +/* tas on machines with everything connected */ +static struct codec_connection tas_connections_all[] = { + { + .connected = CC_SPEAKERS | CC_HEADPHONE | CC_LINEOUT, + .codec_bit = 0, + }, + { + .connected = CC_LINEIN, + .codec_bit = 2, + }, + { + .connected = CC_MICROPHONE, + .codec_bit = 3, + }, + {} /* terminate array by .connected == 0 */ +}; + +static struct codec_connection toonie_connections[] = { + { + .connected = CC_SPEAKERS | CC_HEADPHONE, + .codec_bit = 0, + }, + {} /* terminate array by .connected == 0 */ +}; + +static struct codec_connection topaz_input[] = { + { + .connected = CC_DIGITALIN, + .codec_bit = 0, + }, + {} /* terminate array by .connected == 0 */ +}; + +static struct codec_connection topaz_output[] = { + { + .connected = CC_DIGITALOUT, + .codec_bit = 1, + }, + {} /* terminate array by .connected == 0 */ +}; + +static struct codec_connection topaz_inout[] = { + { + .connected = CC_DIGITALIN, + .codec_bit = 0, + }, + { + .connected = CC_DIGITALOUT, + .codec_bit = 1, + }, + {} /* terminate array by .connected == 0 */ +}; + +static struct layout layouts[] = { + /* last PowerBooks (15" Oct 2005) */ + { .layout_id = 82, + .flags = LAYOUT_FLAG_COMBO_LINEOUT_SPDIF, + .codecs[0] = { + .name = "onyx", + .connections = onyx_connections_noheadphones, + }, + .codecs[1] = { + .name = "topaz", + .connections = topaz_input, + }, + }, + /* PowerMac9,1 */ + { .layout_id = 60, + .codecs[0] = { + .name = "onyx", + .connections = onyx_connections_reallineout, + }, + }, + /* PowerMac9,1 */ + { .layout_id = 61, + .codecs[0] = { + .name = "topaz", + .connections = topaz_input, + }, + }, + /* PowerBook5,7 */ + { .layout_id = 64, + .flags = LAYOUT_FLAG_COMBO_LINEOUT_SPDIF, + .codecs[0] = { + .name = "onyx", + .connections = onyx_connections_noheadphones, + }, + }, + /* PowerBook5,7 */ + { .layout_id = 65, + .codecs[0] = { + .name = "topaz", + .connections = topaz_input, + }, + }, + /* PowerBook5,9 [17" Oct 2005] */ + { .layout_id = 84, + .flags = LAYOUT_FLAG_COMBO_LINEOUT_SPDIF, + .codecs[0] = { + .name = "onyx", + .connections = onyx_connections_noheadphones, + }, + .codecs[1] = { + .name = "topaz", + .connections = topaz_input, + }, + }, + /* PowerMac8,1 */ + { .layout_id = 45, + .codecs[0] = { + .name = "onyx", + .connections = onyx_connections_noheadphones, + }, + .codecs[1] = { + .name = "topaz", + .connections = topaz_input, + }, + }, + /* Quad PowerMac (analog in, analog/digital out) */ + { .layout_id = 68, + .codecs[0] = { + .name = "onyx", + .connections = onyx_connections_nomic, + }, + }, + /* Quad PowerMac (digital in) */ + { .layout_id = 69, + .codecs[0] = { + .name = "topaz", + .connections = topaz_input, + }, + .busname = "digital in", .pcmid = 1 }, + /* Early 2005 PowerBook (PowerBook 5,6) */ + { .layout_id = 70, + .codecs[0] = { + .name = "tas", + .connections = tas_connections_nolineout, + }, + }, + /* PowerBook 5,4 */ + { .layout_id = 51, + .codecs[0] = { + .name = "tas", + .connections = tas_connections_nolineout, + }, + }, + /* PowerBook6,1 */ + { .device_id = 31, + .codecs[0] = { + .name = "tas", + .connections = tas_connections_nolineout, + }, + }, + /* PowerBook6,5 */ + { .device_id = 44, + .codecs[0] = { + .name = "tas", + .connections = tas_connections_all, + }, + }, + /* PowerBook6,7 */ + { .layout_id = 80, + .codecs[0] = { + .name = "tas", + .connections = tas_connections_noline, + }, + }, + /* PowerBook6,8 */ + { .layout_id = 72, + .codecs[0] = { + .name = "tas", + .connections = tas_connections_nolineout, + }, + }, + /* PowerMac8,2 */ + { .layout_id = 86, + .codecs[0] = { + .name = "onyx", + .connections = onyx_connections_nomic, + }, + .codecs[1] = { + .name = "topaz", + .connections = topaz_input, + }, + }, + /* PowerBook6,7 */ + { .layout_id = 92, + .codecs[0] = { + .name = "tas", + .connections = tas_connections_nolineout, + }, + }, + /* PowerMac10,1 (Mac Mini) */ + { .layout_id = 58, + .codecs[0] = { + .name = "toonie", + .connections = toonie_connections, + }, + }, + { + .layout_id = 96, + .codecs[0] = { + .name = "onyx", + .connections = onyx_connections_noheadphones, + }, + }, + /* unknown, untested, but this comes from Apple */ + { .layout_id = 41, + .codecs[0] = { + .name = "tas", + .connections = tas_connections_all, + }, + }, + { .layout_id = 36, + .codecs[0] = { + .name = "tas", + .connections = tas_connections_nomic, + }, + .codecs[1] = { + .name = "topaz", + .connections = topaz_inout, + }, + }, + { .layout_id = 47, + .codecs[0] = { + .name = "onyx", + .connections = onyx_connections_noheadphones, + }, + }, + { .layout_id = 48, + .codecs[0] = { + .name = "topaz", + .connections = topaz_input, + }, + }, + { .layout_id = 49, + .codecs[0] = { + .name = "onyx", + .connections = onyx_connections_nomic, + }, + }, + { .layout_id = 50, + .codecs[0] = { + .name = "topaz", + .connections = topaz_input, + }, + }, + { .layout_id = 56, + .codecs[0] = { + .name = "onyx", + .connections = onyx_connections_noheadphones, + }, + }, + { .layout_id = 57, + .codecs[0] = { + .name = "topaz", + .connections = topaz_input, + }, + }, + { .layout_id = 62, + .codecs[0] = { + .name = "onyx", + .connections = onyx_connections_noheadphones, + }, + .codecs[1] = { + .name = "topaz", + .connections = topaz_output, + }, + }, + { .layout_id = 66, + .codecs[0] = { + .name = "onyx", + .connections = onyx_connections_noheadphones, + }, + }, + { .layout_id = 67, + .codecs[0] = { + .name = "topaz", + .connections = topaz_input, + }, + }, + { .layout_id = 76, + .codecs[0] = { + .name = "tas", + .connections = tas_connections_nomic, + }, + .codecs[1] = { + .name = "topaz", + .connections = topaz_inout, + }, + }, + { .layout_id = 90, + .codecs[0] = { + .name = "tas", + .connections = tas_connections_noline, + }, + }, + { .layout_id = 94, + .codecs[0] = { + .name = "onyx", + /* but it has an external mic?? how to select? */ + .connections = onyx_connections_noheadphones, + }, + }, + { .layout_id = 98, + .codecs[0] = { + .name = "toonie", + .connections = toonie_connections, + }, + }, + { .layout_id = 100, + .codecs[0] = { + .name = "topaz", + .connections = topaz_input, + }, + .codecs[1] = { + .name = "onyx", + .connections = onyx_connections_noheadphones, + }, + }, + /* PowerMac3,4 */ + { .device_id = 14, + .codecs[0] = { + .name = "tas", + .connections = tas_connections_noline, + }, + }, + /* PowerMac3,6 */ + { .device_id = 22, + .codecs[0] = { + .name = "tas", + .connections = tas_connections_all, + }, + }, + /* PowerBook5,2 */ + { .device_id = 35, + .codecs[0] = { + .name = "tas", + .connections = tas_connections_all, + }, + }, + {} +}; + +static struct layout *find_layout_by_id(unsigned int id) +{ + struct layout *l; + + l = layouts; + while (l->codecs[0].name) { + if (l->layout_id == id) + return l; + l++; + } + return NULL; +} + +static struct layout *find_layout_by_device(unsigned int id) +{ + struct layout *l; + + l = layouts; + while (l->codecs[0].name) { + if (l->device_id == id) + return l; + l++; + } + return NULL; +} + +static void use_layout(struct layout *l) +{ + int i; + + for (i=0; icodecs[i].name) { + request_module("snd-aoa-codec-%s", l->codecs[i].name); + } + } + /* now we wait for the codecs to call us back */ +} + +struct layout_dev; + +struct layout_dev_ptr { + struct layout_dev *ptr; +}; + +struct layout_dev { + struct list_head list; + struct soundbus_dev *sdev; + struct device_node *sound; + struct aoa_codec *codecs[MAX_CODECS_PER_BUS]; + struct layout *layout; + struct gpio_runtime gpio; + + /* we need these for headphone/lineout detection */ + struct snd_kcontrol *headphone_ctrl; + struct snd_kcontrol *lineout_ctrl; + struct snd_kcontrol *speaker_ctrl; + struct snd_kcontrol *master_ctrl; + struct snd_kcontrol *headphone_detected_ctrl; + struct snd_kcontrol *lineout_detected_ctrl; + + struct layout_dev_ptr selfptr_headphone; + struct layout_dev_ptr selfptr_lineout; + + u32 have_lineout_detect:1, + have_headphone_detect:1, + switch_on_headphone:1, + switch_on_lineout:1; +}; + +static LIST_HEAD(layouts_list); +static int layouts_list_items; +/* this can go away but only if we allow multiple cards, + * make the fabric handle all the card stuff, etc... */ +static struct layout_dev *layout_device; + +#define control_info snd_ctl_boolean_mono_info + +#define AMP_CONTROL(n, description) \ +static int n##_control_get(struct snd_kcontrol *kcontrol, \ + struct snd_ctl_elem_value *ucontrol) \ +{ \ + struct gpio_runtime *gpio = snd_kcontrol_chip(kcontrol); \ + if (gpio->methods && gpio->methods->get_##n) \ + ucontrol->value.integer.value[0] = \ + gpio->methods->get_##n(gpio); \ + return 0; \ +} \ +static int n##_control_put(struct snd_kcontrol *kcontrol, \ + struct snd_ctl_elem_value *ucontrol) \ +{ \ + struct gpio_runtime *gpio = snd_kcontrol_chip(kcontrol); \ + if (gpio->methods && gpio->methods->set_##n) \ + gpio->methods->set_##n(gpio, \ + !!ucontrol->value.integer.value[0]); \ + return 1; \ +} \ +static const struct snd_kcontrol_new n##_ctl = { \ + .iface = SNDRV_CTL_ELEM_IFACE_MIXER, \ + .name = description, \ + .access = SNDRV_CTL_ELEM_ACCESS_READWRITE, \ + .info = control_info, \ + .get = n##_control_get, \ + .put = n##_control_put, \ +} + +AMP_CONTROL(headphone, "Headphone Switch"); +AMP_CONTROL(speakers, "Speakers Switch"); +AMP_CONTROL(lineout, "Line-Out Switch"); +AMP_CONTROL(master, "Master Switch"); + +static int detect_choice_get(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + struct layout_dev *ldev = snd_kcontrol_chip(kcontrol); + + switch (kcontrol->private_value) { + case 0: + ucontrol->value.integer.value[0] = ldev->switch_on_headphone; + break; + case 1: + ucontrol->value.integer.value[0] = ldev->switch_on_lineout; + break; + default: + return -ENODEV; + } + return 0; +} + +static int detect_choice_put(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + struct layout_dev *ldev = snd_kcontrol_chip(kcontrol); + + switch (kcontrol->private_value) { + case 0: + ldev->switch_on_headphone = !!ucontrol->value.integer.value[0]; + break; + case 1: + ldev->switch_on_lineout = !!ucontrol->value.integer.value[0]; + break; + default: + return -ENODEV; + } + return 1; +} + +static const struct snd_kcontrol_new headphone_detect_choice = { + .iface = SNDRV_CTL_ELEM_IFACE_MIXER, + .name = "Headphone Detect Autoswitch", + .info = control_info, + .access = SNDRV_CTL_ELEM_ACCESS_READWRITE, + .get = detect_choice_get, + .put = detect_choice_put, + .private_value = 0, +}; + +static const struct snd_kcontrol_new lineout_detect_choice = { + .iface = SNDRV_CTL_ELEM_IFACE_MIXER, + .name = "Line-Out Detect Autoswitch", + .info = control_info, + .access = SNDRV_CTL_ELEM_ACCESS_READWRITE, + .get = detect_choice_get, + .put = detect_choice_put, + .private_value = 1, +}; + +static int detected_get(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + struct layout_dev *ldev = snd_kcontrol_chip(kcontrol); + int v; + + switch (kcontrol->private_value) { + case 0: + v = ldev->gpio.methods->get_detect(&ldev->gpio, + AOA_NOTIFY_HEADPHONE); + break; + case 1: + v = ldev->gpio.methods->get_detect(&ldev->gpio, + AOA_NOTIFY_LINE_OUT); + break; + default: + return -ENODEV; + } + ucontrol->value.integer.value[0] = v; + return 0; +} + +static const struct snd_kcontrol_new headphone_detected = { + .iface = SNDRV_CTL_ELEM_IFACE_MIXER, + .name = "Headphone Detected", + .info = control_info, + .access = SNDRV_CTL_ELEM_ACCESS_READ, + .get = detected_get, + .private_value = 0, +}; + +static const struct snd_kcontrol_new lineout_detected = { + .iface = SNDRV_CTL_ELEM_IFACE_MIXER, + .name = "Line-Out Detected", + .info = control_info, + .access = SNDRV_CTL_ELEM_ACCESS_READ, + .get = detected_get, + .private_value = 1, +}; + +static int check_codec(struct aoa_codec *codec, + struct layout_dev *ldev, + struct codec_connect_info *cci) +{ + const u32 *ref; + char propname[32]; + struct codec_connection *cc; + + /* if the codec has a 'codec' node, we require a reference */ + if (of_node_name_eq(codec->node, "codec")) { + snprintf(propname, sizeof(propname), + "platform-%s-codec-ref", codec->name); + ref = of_get_property(ldev->sound, propname, NULL); + if (!ref) { + printk(KERN_INFO "snd-aoa-fabric-layout: " + "required property %s not present\n", propname); + return -ENODEV; + } + if (*ref != codec->node->phandle) { + printk(KERN_INFO "snd-aoa-fabric-layout: " + "%s doesn't match!\n", propname); + return -ENODEV; + } + } else { + if (layouts_list_items != 1) { + printk(KERN_INFO "snd-aoa-fabric-layout: " + "more than one soundbus, but no references.\n"); + return -ENODEV; + } + } + codec->soundbus_dev = ldev->sdev; + codec->gpio = &ldev->gpio; + + cc = cci->connections; + if (!cc) + return -EINVAL; + + printk(KERN_INFO "snd-aoa-fabric-layout: can use this codec\n"); + + codec->connected = 0; + codec->fabric_data = cc; + + while (cc->connected) { + codec->connected |= 1<codec_bit; + cc++; + } + + return 0; +} + +static int layout_found_codec(struct aoa_codec *codec) +{ + struct layout_dev *ldev; + int i; + + list_for_each_entry(ldev, &layouts_list, list) { + for (i=0; ilayout->codecs[i].name) + continue; + if (strcmp(ldev->layout->codecs[i].name, codec->name) == 0) { + if (check_codec(codec, + ldev, + &ldev->layout->codecs[i]) == 0) + return 0; + } + } + } + return -ENODEV; +} + +static void layout_remove_codec(struct aoa_codec *codec) +{ + int i; + /* here remove the codec from the layout dev's + * codec reference */ + + codec->soundbus_dev = NULL; + codec->gpio = NULL; + for (i=0; iptr; + if (data == &ldev->selfptr_headphone) { + v = ldev->gpio.methods->get_detect(&ldev->gpio, AOA_NOTIFY_HEADPHONE); + detected = ldev->headphone_detected_ctrl; + update = ldev->switch_on_headphone; + if (update) { + ldev->gpio.methods->set_speakers(&ldev->gpio, !v); + ldev->gpio.methods->set_headphone(&ldev->gpio, v); + ldev->gpio.methods->set_lineout(&ldev->gpio, 0); + } + } else if (data == &ldev->selfptr_lineout) { + v = ldev->gpio.methods->get_detect(&ldev->gpio, AOA_NOTIFY_LINE_OUT); + detected = ldev->lineout_detected_ctrl; + update = ldev->switch_on_lineout; + if (update) { + ldev->gpio.methods->set_speakers(&ldev->gpio, !v); + ldev->gpio.methods->set_headphone(&ldev->gpio, 0); + ldev->gpio.methods->set_lineout(&ldev->gpio, v); + } + } else + return; + + if (detected) + snd_ctl_notify(card, SNDRV_CTL_EVENT_MASK_VALUE, &detected->id); + if (update) { + c = ldev->headphone_ctrl; + if (c) + snd_ctl_notify(card, SNDRV_CTL_EVENT_MASK_VALUE, &c->id); + c = ldev->speaker_ctrl; + if (c) + snd_ctl_notify(card, SNDRV_CTL_EVENT_MASK_VALUE, &c->id); + c = ldev->lineout_ctrl; + if (c) + snd_ctl_notify(card, SNDRV_CTL_EVENT_MASK_VALUE, &c->id); + } +} + +static void layout_attached_codec(struct aoa_codec *codec) +{ + struct codec_connection *cc; + struct snd_kcontrol *ctl; + int headphones, lineout; + struct layout_dev *ldev = layout_device; + + /* need to add this codec to our codec array! */ + + cc = codec->fabric_data; + + headphones = codec->gpio->methods->get_detect(codec->gpio, + AOA_NOTIFY_HEADPHONE); + lineout = codec->gpio->methods->get_detect(codec->gpio, + AOA_NOTIFY_LINE_OUT); + + if (codec->gpio->methods->set_master) { + ctl = snd_ctl_new1(&master_ctl, codec->gpio); + ldev->master_ctrl = ctl; + aoa_snd_ctl_add(ctl); + } + while (cc->connected) { + if (cc->connected & CC_SPEAKERS) { + if (headphones <= 0 && lineout <= 0) + ldev->gpio.methods->set_speakers(codec->gpio, 1); + ctl = snd_ctl_new1(&speakers_ctl, codec->gpio); + ldev->speaker_ctrl = ctl; + aoa_snd_ctl_add(ctl); + } + if (cc->connected & CC_HEADPHONE) { + if (headphones == 1) + ldev->gpio.methods->set_headphone(codec->gpio, 1); + ctl = snd_ctl_new1(&headphone_ctl, codec->gpio); + ldev->headphone_ctrl = ctl; + aoa_snd_ctl_add(ctl); + ldev->have_headphone_detect = + !ldev->gpio.methods + ->set_notify(&ldev->gpio, + AOA_NOTIFY_HEADPHONE, + layout_notify, + &ldev->selfptr_headphone); + if (ldev->have_headphone_detect) { + ctl = snd_ctl_new1(&headphone_detect_choice, + ldev); + aoa_snd_ctl_add(ctl); + ctl = snd_ctl_new1(&headphone_detected, + ldev); + ldev->headphone_detected_ctrl = ctl; + aoa_snd_ctl_add(ctl); + } + } + if (cc->connected & CC_LINEOUT) { + if (lineout == 1) + ldev->gpio.methods->set_lineout(codec->gpio, 1); + ctl = snd_ctl_new1(&lineout_ctl, codec->gpio); + if (cc->connected & CC_LINEOUT_LABELLED_HEADPHONE) + strscpy(ctl->id.name, + "Headphone Switch", sizeof(ctl->id.name)); + ldev->lineout_ctrl = ctl; + aoa_snd_ctl_add(ctl); + ldev->have_lineout_detect = + !ldev->gpio.methods + ->set_notify(&ldev->gpio, + AOA_NOTIFY_LINE_OUT, + layout_notify, + &ldev->selfptr_lineout); + if (ldev->have_lineout_detect) { + ctl = snd_ctl_new1(&lineout_detect_choice, + ldev); + if (cc->connected & CC_LINEOUT_LABELLED_HEADPHONE) + strscpy(ctl->id.name, + "Headphone Detect Autoswitch", + sizeof(ctl->id.name)); + aoa_snd_ctl_add(ctl); + ctl = snd_ctl_new1(&lineout_detected, + ldev); + if (cc->connected & CC_LINEOUT_LABELLED_HEADPHONE) + strscpy(ctl->id.name, + "Headphone Detected", + sizeof(ctl->id.name)); + ldev->lineout_detected_ctrl = ctl; + aoa_snd_ctl_add(ctl); + } + } + cc++; + } + /* now update initial state */ + if (ldev->have_headphone_detect) + layout_notify(&ldev->selfptr_headphone); + if (ldev->have_lineout_detect) + layout_notify(&ldev->selfptr_lineout); +} + +static struct aoa_fabric layout_fabric = { + .name = "SoundByLayout", + .owner = THIS_MODULE, + .found_codec = layout_found_codec, + .remove_codec = layout_remove_codec, + .attached_codec = layout_attached_codec, +}; + +static int aoa_fabric_layout_probe(struct soundbus_dev *sdev) +{ + struct device_node *sound = NULL; + const unsigned int *id; + struct layout *layout = NULL; + struct layout_dev *ldev = NULL; + int err; + + /* hm, currently we can only have one ... */ + if (layout_device) + return -ENODEV; + + /* by breaking out we keep a reference */ + for_each_child_of_node(sdev->ofdev.dev.of_node, sound) { + if (of_node_is_type(sound, "soundchip")) + break; + } + if (!sound) + return -ENODEV; + + id = of_get_property(sound, "layout-id", NULL); + if (id) { + layout = find_layout_by_id(*id); + } else { + id = of_get_property(sound, "device-id", NULL); + if (id) + layout = find_layout_by_device(*id); + } + + if (!layout) { + printk(KERN_ERR "snd-aoa-fabric-layout: unknown layout\n"); + goto outnodev; + } + + ldev = kzalloc(sizeof(struct layout_dev), GFP_KERNEL); + if (!ldev) + goto outnodev; + + layout_device = ldev; + ldev->sdev = sdev; + ldev->sound = sound; + ldev->layout = layout; + ldev->gpio.node = sound->parent; + switch (layout->layout_id) { + case 0: /* anything with device_id, not layout_id */ + case 41: /* that unknown machine no one seems to have */ + case 51: /* PowerBook5,4 */ + case 58: /* Mac Mini */ + ldev->gpio.methods = ftr_gpio_methods; + printk(KERN_DEBUG + "snd-aoa-fabric-layout: Using direct GPIOs\n"); + break; + default: + ldev->gpio.methods = pmf_gpio_methods; + printk(KERN_DEBUG + "snd-aoa-fabric-layout: Using PMF GPIOs\n"); + } + ldev->selfptr_headphone.ptr = ldev; + ldev->selfptr_lineout.ptr = ldev; + dev_set_drvdata(&sdev->ofdev.dev, ldev); + list_add(&ldev->list, &layouts_list); + layouts_list_items++; + + /* assign these before registering ourselves, so + * callbacks that are done during registration + * already have the values */ + sdev->pcmid = ldev->layout->pcmid; + if (ldev->layout->busname) { + sdev->pcmname = ldev->layout->busname; + } else { + sdev->pcmname = "Master"; + } + + ldev->gpio.methods->init(&ldev->gpio); + + err = aoa_fabric_register(&layout_fabric, &sdev->ofdev.dev); + if (err && err != -EALREADY) { + printk(KERN_INFO "snd-aoa-fabric-layout: can't use," + " another fabric is active!\n"); + goto outlistdel; + } + + use_layout(layout); + ldev->switch_on_headphone = 1; + ldev->switch_on_lineout = 1; + return 0; + outlistdel: + /* we won't be using these then... */ + ldev->gpio.methods->exit(&ldev->gpio); + /* reset if we didn't use it */ + sdev->pcmname = NULL; + sdev->pcmid = -1; + list_del(&ldev->list); + layouts_list_items--; + kfree(ldev); + outnodev: + of_node_put(sound); + layout_device = NULL; + return -ENODEV; +} + +static int aoa_fabric_layout_remove(struct soundbus_dev *sdev) +{ + struct layout_dev *ldev = dev_get_drvdata(&sdev->ofdev.dev); + int i; + + for (i=0; icodecs[i]) { + aoa_fabric_unlink_codec(ldev->codecs[i]); + } + ldev->codecs[i] = NULL; + } + list_del(&ldev->list); + layouts_list_items--; + of_node_put(ldev->sound); + + ldev->gpio.methods->set_notify(&ldev->gpio, + AOA_NOTIFY_HEADPHONE, + NULL, + NULL); + ldev->gpio.methods->set_notify(&ldev->gpio, + AOA_NOTIFY_LINE_OUT, + NULL, + NULL); + + ldev->gpio.methods->exit(&ldev->gpio); + layout_device = NULL; + kfree(ldev); + sdev->pcmid = -1; + sdev->pcmname = NULL; + return 0; +} + +#ifdef CONFIG_PM_SLEEP +static int aoa_fabric_layout_suspend(struct device *dev) +{ + struct layout_dev *ldev = dev_get_drvdata(dev); + + if (ldev->gpio.methods && ldev->gpio.methods->all_amps_off) + ldev->gpio.methods->all_amps_off(&ldev->gpio); + + return 0; +} + +static int aoa_fabric_layout_resume(struct device *dev) +{ + struct layout_dev *ldev = dev_get_drvdata(dev); + + if (ldev->gpio.methods && ldev->gpio.methods->all_amps_restore) + ldev->gpio.methods->all_amps_restore(&ldev->gpio); + + return 0; +} + +static SIMPLE_DEV_PM_OPS(aoa_fabric_layout_pm_ops, + aoa_fabric_layout_suspend, aoa_fabric_layout_resume); + +#endif + +static struct soundbus_driver aoa_soundbus_driver = { + .name = "snd_aoa_soundbus_drv", + .owner = THIS_MODULE, + .probe = aoa_fabric_layout_probe, + .remove = aoa_fabric_layout_remove, + .driver = { + .owner = THIS_MODULE, +#ifdef CONFIG_PM_SLEEP + .pm = &aoa_fabric_layout_pm_ops, +#endif + } +}; + +static int __init aoa_fabric_layout_init(void) +{ + return soundbus_register_driver(&aoa_soundbus_driver); +} + +static void __exit aoa_fabric_layout_exit(void) +{ + soundbus_unregister_driver(&aoa_soundbus_driver); + aoa_fabric_unregister(&layout_fabric); +} + +module_init(aoa_fabric_layout_init); +module_exit(aoa_fabric_layout_exit); -- cgit v1.2.3