From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- sound/core/pcm_dmaengine.c | 473 +++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 473 insertions(+) create mode 100644 sound/core/pcm_dmaengine.c (limited to 'sound/core/pcm_dmaengine.c') diff --git a/sound/core/pcm_dmaengine.c b/sound/core/pcm_dmaengine.c new file mode 100644 index 000000000..494ec0c20 --- /dev/null +++ b/sound/core/pcm_dmaengine.c @@ -0,0 +1,473 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * Copyright (C) 2012, Analog Devices Inc. + * Author: Lars-Peter Clausen + * + * Based on: + * imx-pcm-dma-mx2.c, Copyright 2009 Sascha Hauer + * mxs-pcm.c, Copyright (C) 2011 Freescale Semiconductor, Inc. + * ep93xx-pcm.c, Copyright (C) 2006 Lennert Buytenhek + * Copyright (C) 2006 Applied Data Systems + */ +#include +#include +#include +#include +#include +#include +#include + +#include + +struct dmaengine_pcm_runtime_data { + struct dma_chan *dma_chan; + dma_cookie_t cookie; + + unsigned int pos; +}; + +static inline struct dmaengine_pcm_runtime_data *substream_to_prtd( + const struct snd_pcm_substream *substream) +{ + return substream->runtime->private_data; +} + +struct dma_chan *snd_dmaengine_pcm_get_chan(struct snd_pcm_substream *substream) +{ + struct dmaengine_pcm_runtime_data *prtd = substream_to_prtd(substream); + + return prtd->dma_chan; +} +EXPORT_SYMBOL_GPL(snd_dmaengine_pcm_get_chan); + +/** + * snd_hwparams_to_dma_slave_config - Convert hw_params to dma_slave_config + * @substream: PCM substream + * @params: hw_params + * @slave_config: DMA slave config + * + * This function can be used to initialize a dma_slave_config from a substream + * and hw_params in a dmaengine based PCM driver implementation. + * + * Return: zero if successful, or a negative error code + */ +int snd_hwparams_to_dma_slave_config(const struct snd_pcm_substream *substream, + const struct snd_pcm_hw_params *params, + struct dma_slave_config *slave_config) +{ + enum dma_slave_buswidth buswidth; + int bits; + + bits = params_physical_width(params); + if (bits < 8 || bits > 64) + return -EINVAL; + else if (bits == 8) + buswidth = DMA_SLAVE_BUSWIDTH_1_BYTE; + else if (bits == 16) + buswidth = DMA_SLAVE_BUSWIDTH_2_BYTES; + else if (bits == 24) + buswidth = DMA_SLAVE_BUSWIDTH_3_BYTES; + else if (bits <= 32) + buswidth = DMA_SLAVE_BUSWIDTH_4_BYTES; + else + buswidth = DMA_SLAVE_BUSWIDTH_8_BYTES; + + if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) { + slave_config->direction = DMA_MEM_TO_DEV; + slave_config->dst_addr_width = buswidth; + } else { + slave_config->direction = DMA_DEV_TO_MEM; + slave_config->src_addr_width = buswidth; + } + + slave_config->device_fc = false; + + return 0; +} +EXPORT_SYMBOL_GPL(snd_hwparams_to_dma_slave_config); + +/** + * snd_dmaengine_pcm_set_config_from_dai_data() - Initializes a dma slave config + * using DAI DMA data. + * @substream: PCM substream + * @dma_data: DAI DMA data + * @slave_config: DMA slave configuration + * + * Initializes the {dst,src}_addr, {dst,src}_maxburst, {dst,src}_addr_width + * fields of the DMA slave config from the same fields of the DAI DMA + * data struct. The src and dst fields will be initialized depending on the + * direction of the substream. If the substream is a playback stream the dst + * fields will be initialized, if it is a capture stream the src fields will be + * initialized. The {dst,src}_addr_width field will only be initialized if the + * SND_DMAENGINE_PCM_DAI_FLAG_PACK flag is set or if the addr_width field of + * the DAI DMA data struct is not equal to DMA_SLAVE_BUSWIDTH_UNDEFINED. If + * both conditions are met the latter takes priority. + */ +void snd_dmaengine_pcm_set_config_from_dai_data( + const struct snd_pcm_substream *substream, + const struct snd_dmaengine_dai_dma_data *dma_data, + struct dma_slave_config *slave_config) +{ + if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) { + slave_config->dst_addr = dma_data->addr; + slave_config->dst_maxburst = dma_data->maxburst; + if (dma_data->flags & SND_DMAENGINE_PCM_DAI_FLAG_PACK) + slave_config->dst_addr_width = + DMA_SLAVE_BUSWIDTH_UNDEFINED; + if (dma_data->addr_width != DMA_SLAVE_BUSWIDTH_UNDEFINED) + slave_config->dst_addr_width = dma_data->addr_width; + } else { + slave_config->src_addr = dma_data->addr; + slave_config->src_maxburst = dma_data->maxburst; + if (dma_data->flags & SND_DMAENGINE_PCM_DAI_FLAG_PACK) + slave_config->src_addr_width = + DMA_SLAVE_BUSWIDTH_UNDEFINED; + if (dma_data->addr_width != DMA_SLAVE_BUSWIDTH_UNDEFINED) + slave_config->src_addr_width = dma_data->addr_width; + } + + slave_config->peripheral_config = dma_data->peripheral_config; + slave_config->peripheral_size = dma_data->peripheral_size; +} +EXPORT_SYMBOL_GPL(snd_dmaengine_pcm_set_config_from_dai_data); + +static void dmaengine_pcm_dma_complete(void *arg) +{ + unsigned int new_pos; + struct snd_pcm_substream *substream = arg; + struct dmaengine_pcm_runtime_data *prtd = substream_to_prtd(substream); + + new_pos = prtd->pos + snd_pcm_lib_period_bytes(substream); + if (new_pos >= snd_pcm_lib_buffer_bytes(substream)) + new_pos = 0; + prtd->pos = new_pos; + + snd_pcm_period_elapsed(substream); +} + +static int dmaengine_pcm_prepare_and_submit(struct snd_pcm_substream *substream) +{ + struct dmaengine_pcm_runtime_data *prtd = substream_to_prtd(substream); + struct dma_chan *chan = prtd->dma_chan; + struct dma_async_tx_descriptor *desc; + enum dma_transfer_direction direction; + unsigned long flags = DMA_CTRL_ACK; + + direction = snd_pcm_substream_to_dma_direction(substream); + + if (!substream->runtime->no_period_wakeup) + flags |= DMA_PREP_INTERRUPT; + + prtd->pos = 0; + desc = dmaengine_prep_dma_cyclic(chan, + substream->runtime->dma_addr, + snd_pcm_lib_buffer_bytes(substream), + snd_pcm_lib_period_bytes(substream), direction, flags); + + if (!desc) + return -ENOMEM; + + desc->callback = dmaengine_pcm_dma_complete; + desc->callback_param = substream; + prtd->cookie = dmaengine_submit(desc); + + return 0; +} + +/** + * snd_dmaengine_pcm_trigger - dmaengine based PCM trigger implementation + * @substream: PCM substream + * @cmd: Trigger command + * + * This function can be used as the PCM trigger callback for dmaengine based PCM + * driver implementations. + * + * Return: 0 on success, a negative error code otherwise + */ +int snd_dmaengine_pcm_trigger(struct snd_pcm_substream *substream, int cmd) +{ + struct dmaengine_pcm_runtime_data *prtd = substream_to_prtd(substream); + struct snd_pcm_runtime *runtime = substream->runtime; + int ret; + + switch (cmd) { + case SNDRV_PCM_TRIGGER_START: + ret = dmaengine_pcm_prepare_and_submit(substream); + if (ret) + return ret; + dma_async_issue_pending(prtd->dma_chan); + break; + case SNDRV_PCM_TRIGGER_RESUME: + case SNDRV_PCM_TRIGGER_PAUSE_RELEASE: + dmaengine_resume(prtd->dma_chan); + break; + case SNDRV_PCM_TRIGGER_SUSPEND: + if (runtime->info & SNDRV_PCM_INFO_PAUSE) + dmaengine_pause(prtd->dma_chan); + else + dmaengine_terminate_async(prtd->dma_chan); + break; + case SNDRV_PCM_TRIGGER_PAUSE_PUSH: + dmaengine_pause(prtd->dma_chan); + break; + case SNDRV_PCM_TRIGGER_STOP: + dmaengine_terminate_async(prtd->dma_chan); + break; + default: + return -EINVAL; + } + + return 0; +} +EXPORT_SYMBOL_GPL(snd_dmaengine_pcm_trigger); + +/** + * snd_dmaengine_pcm_pointer_no_residue - dmaengine based PCM pointer implementation + * @substream: PCM substream + * + * This function is deprecated and should not be used by new drivers, as its + * results may be unreliable. + * + * Return: PCM position in frames + */ +snd_pcm_uframes_t snd_dmaengine_pcm_pointer_no_residue(struct snd_pcm_substream *substream) +{ + struct dmaengine_pcm_runtime_data *prtd = substream_to_prtd(substream); + return bytes_to_frames(substream->runtime, prtd->pos); +} +EXPORT_SYMBOL_GPL(snd_dmaengine_pcm_pointer_no_residue); + +/** + * snd_dmaengine_pcm_pointer - dmaengine based PCM pointer implementation + * @substream: PCM substream + * + * This function can be used as the PCM pointer callback for dmaengine based PCM + * driver implementations. + * + * Return: PCM position in frames + */ +snd_pcm_uframes_t snd_dmaengine_pcm_pointer(struct snd_pcm_substream *substream) +{ + struct dmaengine_pcm_runtime_data *prtd = substream_to_prtd(substream); + struct snd_pcm_runtime *runtime = substream->runtime; + struct dma_tx_state state; + enum dma_status status; + unsigned int buf_size; + unsigned int pos = 0; + + status = dmaengine_tx_status(prtd->dma_chan, prtd->cookie, &state); + if (status == DMA_IN_PROGRESS || status == DMA_PAUSED) { + buf_size = snd_pcm_lib_buffer_bytes(substream); + if (state.residue > 0 && state.residue <= buf_size) + pos = buf_size - state.residue; + + runtime->delay = bytes_to_frames(runtime, + state.in_flight_bytes); + } + + return bytes_to_frames(runtime, pos); +} +EXPORT_SYMBOL_GPL(snd_dmaengine_pcm_pointer); + +/** + * snd_dmaengine_pcm_request_channel - Request channel for the dmaengine PCM + * @filter_fn: Filter function used to request the DMA channel + * @filter_data: Data passed to the DMA filter function + * + * This function request a DMA channel for usage with dmaengine PCM. + * + * Return: NULL or the requested DMA channel + */ +struct dma_chan *snd_dmaengine_pcm_request_channel(dma_filter_fn filter_fn, + void *filter_data) +{ + dma_cap_mask_t mask; + + dma_cap_zero(mask); + dma_cap_set(DMA_SLAVE, mask); + dma_cap_set(DMA_CYCLIC, mask); + + return dma_request_channel(mask, filter_fn, filter_data); +} +EXPORT_SYMBOL_GPL(snd_dmaengine_pcm_request_channel); + +/** + * snd_dmaengine_pcm_open - Open a dmaengine based PCM substream + * @substream: PCM substream + * @chan: DMA channel to use for data transfers + * + * The function should usually be called from the pcm open callback. Note that + * this function will use private_data field of the substream's runtime. So it + * is not available to your pcm driver implementation. + * + * Return: 0 on success, a negative error code otherwise + */ +int snd_dmaengine_pcm_open(struct snd_pcm_substream *substream, + struct dma_chan *chan) +{ + struct dmaengine_pcm_runtime_data *prtd; + int ret; + + if (!chan) + return -ENXIO; + + ret = snd_pcm_hw_constraint_integer(substream->runtime, + SNDRV_PCM_HW_PARAM_PERIODS); + if (ret < 0) + return ret; + + prtd = kzalloc(sizeof(*prtd), GFP_KERNEL); + if (!prtd) + return -ENOMEM; + + prtd->dma_chan = chan; + + substream->runtime->private_data = prtd; + + return 0; +} +EXPORT_SYMBOL_GPL(snd_dmaengine_pcm_open); + +/** + * snd_dmaengine_pcm_open_request_chan - Open a dmaengine based PCM substream and request channel + * @substream: PCM substream + * @filter_fn: Filter function used to request the DMA channel + * @filter_data: Data passed to the DMA filter function + * + * This function will request a DMA channel using the passed filter function and + * data. The function should usually be called from the pcm open callback. Note + * that this function will use private_data field of the substream's runtime. So + * it is not available to your pcm driver implementation. + * + * Return: 0 on success, a negative error code otherwise + */ +int snd_dmaengine_pcm_open_request_chan(struct snd_pcm_substream *substream, + dma_filter_fn filter_fn, void *filter_data) +{ + return snd_dmaengine_pcm_open(substream, + snd_dmaengine_pcm_request_channel(filter_fn, filter_data)); +} +EXPORT_SYMBOL_GPL(snd_dmaengine_pcm_open_request_chan); + +/** + * snd_dmaengine_pcm_close - Close a dmaengine based PCM substream + * @substream: PCM substream + * + * Return: 0 on success, a negative error code otherwise + */ +int snd_dmaengine_pcm_close(struct snd_pcm_substream *substream) +{ + struct dmaengine_pcm_runtime_data *prtd = substream_to_prtd(substream); + + dmaengine_synchronize(prtd->dma_chan); + kfree(prtd); + + return 0; +} +EXPORT_SYMBOL_GPL(snd_dmaengine_pcm_close); + +/** + * snd_dmaengine_pcm_close_release_chan - Close a dmaengine based PCM + * substream and release channel + * @substream: PCM substream + * + * Releases the DMA channel associated with the PCM substream. + * + * Return: zero if successful, or a negative error code + */ +int snd_dmaengine_pcm_close_release_chan(struct snd_pcm_substream *substream) +{ + struct dmaengine_pcm_runtime_data *prtd = substream_to_prtd(substream); + + dmaengine_synchronize(prtd->dma_chan); + dma_release_channel(prtd->dma_chan); + kfree(prtd); + + return 0; +} +EXPORT_SYMBOL_GPL(snd_dmaengine_pcm_close_release_chan); + +/** + * snd_dmaengine_pcm_refine_runtime_hwparams - Refine runtime hw params + * @substream: PCM substream + * @dma_data: DAI DMA data + * @hw: PCM hw params + * @chan: DMA channel to use for data transfers + * + * This function will query DMA capability, then refine the pcm hardware + * parameters. + * + * Return: 0 on success, a negative error code otherwise + */ +int snd_dmaengine_pcm_refine_runtime_hwparams( + struct snd_pcm_substream *substream, + struct snd_dmaengine_dai_dma_data *dma_data, + struct snd_pcm_hardware *hw, + struct dma_chan *chan) +{ + struct dma_slave_caps dma_caps; + u32 addr_widths = BIT(DMA_SLAVE_BUSWIDTH_1_BYTE) | + BIT(DMA_SLAVE_BUSWIDTH_2_BYTES) | + BIT(DMA_SLAVE_BUSWIDTH_4_BYTES); + snd_pcm_format_t i; + int ret = 0; + + if (!hw || !chan || !dma_data) + return -EINVAL; + + ret = dma_get_slave_caps(chan, &dma_caps); + if (ret == 0) { + if (dma_caps.cmd_pause && dma_caps.cmd_resume) + hw->info |= SNDRV_PCM_INFO_PAUSE | SNDRV_PCM_INFO_RESUME; + if (dma_caps.residue_granularity <= DMA_RESIDUE_GRANULARITY_SEGMENT) + hw->info |= SNDRV_PCM_INFO_BATCH; + + if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) + addr_widths = dma_caps.dst_addr_widths; + else + addr_widths = dma_caps.src_addr_widths; + } + + /* + * If SND_DMAENGINE_PCM_DAI_FLAG_PACK is set keep + * hw.formats set to 0, meaning no restrictions are in place. + * In this case it's the responsibility of the DAI driver to + * provide the supported format information. + */ + if (!(dma_data->flags & SND_DMAENGINE_PCM_DAI_FLAG_PACK)) + /* + * Prepare formats mask for valid/allowed sample types. If the + * dma does not have support for the given physical word size, + * it needs to be masked out so user space can not use the + * format which produces corrupted audio. + * In case the dma driver does not implement the slave_caps the + * default assumption is that it supports 1, 2 and 4 bytes + * widths. + */ + pcm_for_each_format(i) { + int bits = snd_pcm_format_physical_width(i); + + /* + * Enable only samples with DMA supported physical + * widths + */ + switch (bits) { + case 8: + case 16: + case 24: + case 32: + case 64: + if (addr_widths & (1 << (bits / 8))) + hw->formats |= pcm_format_to_bits(i); + break; + default: + /* Unsupported types */ + break; + } + } + + return ret; +} +EXPORT_SYMBOL_GPL(snd_dmaengine_pcm_refine_runtime_hwparams); + +MODULE_LICENSE("GPL"); -- cgit v1.2.3