From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- sound/drivers/Kconfig | 246 ++++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 246 insertions(+) create mode 100644 sound/drivers/Kconfig (limited to 'sound/drivers/Kconfig') diff --git a/sound/drivers/Kconfig b/sound/drivers/Kconfig new file mode 100644 index 000000000..be3009746 --- /dev/null +++ b/sound/drivers/Kconfig @@ -0,0 +1,246 @@ +# SPDX-License-Identifier: GPL-2.0-only +config SND_MPU401_UART + tristate + select SND_RAWMIDI + +config SND_OPL3_LIB + tristate + select SND_TIMER + select SND_HWDEP + select SND_SEQ_DEVICE if SND_SEQUENCER != n + +config SND_OPL4_LIB + tristate + select SND_TIMER + select SND_HWDEP + select SND_SEQ_DEVICE if SND_SEQUENCER != n + +# select SEQ stuff to min(SND_SEQUENCER,SND_XXX) +config SND_OPL3_LIB_SEQ + def_tristate SND_SEQUENCER && SND_OPL3_LIB + select SND_SEQ_MIDI_EMUL + select SND_SEQ_MIDI_EVENT + +config SND_OPL4_LIB_SEQ + def_tristate SND_SEQUENCER && SND_OPL4_LIB + select SND_SEQ_MIDI_EMUL + select SND_SEQ_MIDI_EVENT + +config SND_VX_LIB + tristate + select FW_LOADER + select SND_HWDEP + select SND_PCM + +config SND_AC97_CODEC + tristate + select SND_PCM + select AC97_BUS + select SND_VMASTER + +menuconfig SND_DRIVERS + bool "Generic sound devices" + default y + help + Support for generic sound devices. + +if SND_DRIVERS + +config SND_PCSP + tristate "PC-Speaker support (READ HELP!)" + depends on PCSPKR_PLATFORM && X86 && HIGH_RES_TIMERS + depends on INPUT + select SND_PCM + help + If you don't have a sound card in your computer, you can include a + driver for the PC speaker which allows it to act like a primitive + sound card. + This driver also replaces the pcspkr driver for beeps. + + You can compile this as a module which will be called snd-pcsp. + + WARNING: if you already have a soundcard, enabling this + driver may lead to a problem. Namely, it may get loaded + before the other sound driver of yours, making the + pc-speaker a default sound device. Which is likely not + what you want. To make this driver play nicely with other + sound driver, you can add this in a configuration file under + /etc/modprobe.d/ directory: + options snd-pcsp index=2 + + You don't need this driver if you only want your pc-speaker to beep. + You don't need this driver if you have a tablet piezo beeper + in your PC instead of the real speaker. + + Say N if you have a sound card. + Say M if you don't. + Say Y only if you really know what you do. + +config SND_DUMMY + tristate "Dummy (/dev/null) soundcard" + select SND_PCM + help + Say Y here to include the dummy driver. This driver does + nothing, but emulates various mixer controls and PCM devices. + + You don't need this unless you're testing the hardware support + of programs using the ALSA API. + + To compile this driver as a module, choose M here: the module + will be called snd-dummy. + +config SND_ALOOP + tristate "Generic loopback driver (PCM)" + select SND_PCM + select SND_TIMER + help + Say 'Y' or 'M' to include support for the PCM loopback device. + This module returns played samples back to the user space using + the standard ALSA PCM device. The devices are routed 0->1 and + 1->0, where first number is the playback PCM device and second + number is the capture device. Module creates two PCM devices and + configured number of substreams (see the pcm_substreams module + parameter). + + The loopback device allows time synchronization with an external + timing source using the time shift universal control (+-20% + of system time). + + To compile this driver as a module, choose M here: the module + will be called snd-aloop. + +config SND_VIRMIDI + tristate "Virtual MIDI soundcard" + depends on SND_SEQUENCER + select SND_TIMER + select SND_RAWMIDI + select SND_SEQ_VIRMIDI + select SND_SEQ_MIDI_EVENT + help + Say Y here to include the virtual MIDI driver. This driver + allows to connect applications using raw MIDI devices to + sequencer clients. + + If you don't know what MIDI is, say N here. + + To compile this driver as a module, choose M here: the module + will be called snd-virmidi. + +config SND_MTPAV + tristate "MOTU MidiTimePiece AV multiport MIDI" + select SND_RAWMIDI + help + To use a MOTU MidiTimePiece AV multiport MIDI adapter + connected to the parallel port, say Y here and make sure that + the standard parallel port driver isn't used for the port. + + To compile this driver as a module, choose M here: the module + will be called snd-mtpav. + +config SND_MTS64 + tristate "ESI Miditerminal 4140 driver" + depends on PARPORT + select SND_RAWMIDI + help + The ESI Miditerminal 4140 is a 4 In 4 Out MIDI Interface with + additional SMPTE Timecode capabilities for the parallel port. + + Say 'Y' to include support for this device. + + To compile this driver as a module, chose 'M' here: the module + will be called snd-mts64. + +config SND_SERIAL_U16550 + tristate "UART16550 serial MIDI driver" + select SND_RAWMIDI + help + To include support for MIDI serial port interfaces, say Y here + and read . + This driver works with serial UARTs 16550 and better. + + This driver accesses the serial port hardware directly, so + make sure that the standard serial driver isn't used or + deactivated with setserial before loading this driver. + + To compile this driver as a module, choose M here: the module + will be called snd-serial-u16550. + +config SND_SERIAL_GENERIC + tristate "Generic serial MIDI driver" + depends on SERIAL_DEV_BUS + depends on OF + select SND_RAWMIDI + help + To include support for mapping generic serial devices as raw + ALSA MIDI devices, say Y here. The driver only supports setting + the serial port to standard baudrates. To attain the standard MIDI + baudrate of 31.25 kBaud, configure the clock of the underlying serial + device so that a requested 38.4 kBaud will result in the standard speed. + + Use this devicetree binding to configure serial port mapping + + + To compile this driver as a module, choose M here: the module + will be called snd-serial-generic. + +config SND_MPU401 + tristate "Generic MPU-401 UART driver" + select SND_MPU401_UART + help + Say Y here to include support for MIDI ports compatible with + the Roland MPU-401 interface in UART mode. + + To compile this driver as a module, choose M here: the module + will be called snd-mpu401. + +config SND_PORTMAN2X4 + tristate "Portman 2x4 driver" + depends on PARPORT + select SND_RAWMIDI + help + Say Y here to include support for Midiman Portman 2x4 parallel + port MIDI device. + + To compile this driver as a module, choose M here: the module + will be called snd-portman2x4. + +config SND_AC97_POWER_SAVE + bool "AC97 Power-Saving Mode" + depends on SND_AC97_CODEC + default n + help + Say Y here to enable the aggressive power-saving support of + AC97 codecs. In this mode, the power-mode is dynamically + controlled at each open/close. + + The mode is activated by passing 'power_save=X' to the + snd-ac97-codec driver module, where 'X' is the time-out + value, a nonnegative integer that specifies how many + seconds of idle time the driver must count before it may + put the AC97 into power-save mode; a value of 0 (zero) + disables the use of this power-save mode. + + After the snd-ac97-codec driver module has been loaded, + the 'power_save' parameter can be set via sysfs as follows: + + echo 10 > /sys/module/snd_ac97_codec/parameters/power_save + + In this case, the time-out is set to 10 seconds; setting + the time-out to 1 second (the minimum activation value) + isn't recommended because many applications try to reopen + the device frequently. A value of 10 seconds would be a + good choice for normal operations. + + See Documentation/sound/designs/powersave.rst for more details. + +config SND_AC97_POWER_SAVE_DEFAULT + int "Default time-out for AC97 power-save mode" + depends on SND_AC97_POWER_SAVE + default 0 + help + The default time-out value in seconds for AC97 automatic + power-save mode. 0 means to disable the power-save mode. + + See SND_AC97_POWER_SAVE for more details. + +endif # SND_DRIVERS -- cgit v1.2.3