From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- sound/firewire/Kconfig | 200 +++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 200 insertions(+) create mode 100644 sound/firewire/Kconfig (limited to 'sound/firewire/Kconfig') diff --git a/sound/firewire/Kconfig b/sound/firewire/Kconfig new file mode 100644 index 000000000..22b6c7796 --- /dev/null +++ b/sound/firewire/Kconfig @@ -0,0 +1,200 @@ +# SPDX-License-Identifier: GPL-2.0-only +menuconfig SND_FIREWIRE + bool "FireWire sound devices" + depends on FIREWIRE + default y + help + Support for IEEE-1394/FireWire/iLink sound devices. + +if SND_FIREWIRE && FIREWIRE + +config SND_FIREWIRE_LIB + tristate + select SND_PCM + select SND_RAWMIDI + +config SND_DICE + tristate "DICE-based DACs support" + select SND_HWDEP + select SND_FIREWIRE_LIB + help + Say Y here to include support for devices based on the DICE chip family + (DICE-II/TCD2210(Mini)/TCD2220(Jr.)) which TC Applied Technologies (TCAT) produced. + * Allen and Heath Zed R16 + * Alesis iO 14/26 FireWire, MasterControl, MultiMix 8/12/16 FireWire + * Avid Mbox 3 Pro + * FlexRadio Systems FLEX-3000, FLEX-5000 + * Focusrite Liquid Saffire 56 + * Focusrite Saffire Pro 14, Pro 24, Pro 24 DSP, Pro 26, Pro 40(TCD2220) + * Harman Music Group Lexicon I-ONIX FW810S + * Loud Technologies Mackie Onyx Blackbird, Onyx 820i/1220i/1620i/1640i (latter models) + * M-Audio ProFire 610/2626 + * Mytek Stereo192-DSD DAC + * Midas Klark Teknik VeniceF series + * PreSonus FireStudio, FireStudio Mobile, FireStudio Project, FireStudio Tube + * PreSonus StudioLive 16.4.2, 16.0.2, 24.4.2, 32.4.2 + * Solid State Logic Duende Classic, Duende Mini + * TC Electronic Studio Konnekt 48, Konnekt 24D, Konnekt Live, Impact Twin + * TC Electronic Digital Konnekt x32, Desktop Konnekt 6 + * Weiss Engineering ADC2, Vesta, Minerva, AFI1, DAC1, INT202, DAC202 + + To compile this driver as a module, choose M here: the module + will be called snd-dice. + +config SND_OXFW + tristate "Oxford Semiconductor FW970/971 chipset support" + select SND_FIREWIRE_LIB + select SND_HWDEP + help + Say Y here to include support for FireWire devices based on + Oxford Semiconductor FW970/971 chipset. + * Griffin Firewave + * LaCie Firewire Speakers + * Behringer F-Control Audio 202 + * Mackie(Loud) Onyx-i series (former models) + * Mackie(Loud) Onyx 1640i (former model) + * Mackie(Loud) Onyx Satellite + * Mackie(Loud) Tapco Link.Firewire + * Mackie(Loud) d.2 pro/d.4 pro (built-in FireWire card with OXFW971 ASIC) + * Mackie(Loud) U.420/U.420d + * TASCAM FireOne + * Stanton Controllers & Systems 1 Deck/Mixer + * APOGEE duet FireWire + + To compile this driver as a module, choose M here: the module + will be called snd-oxfw. + +config SND_ISIGHT + tristate "Apple iSight microphone" + select SND_FIREWIRE_LIB + help + Say Y here to include support for the front and rear microphones + of the Apple iSight web camera. + + To compile this driver as a module, choose M here: the module + will be called snd-isight. + +config SND_FIREWORKS + tristate "Echo Fireworks board module support" + select SND_FIREWIRE_LIB + select SND_HWDEP + help + Say Y here to include support for FireWire devices based + on Echo Digital Audio Fireworks board: + * Mackie Onyx 400F/1200F + * Echo AudioFire12/8(until 2009 July) + * Echo AudioFire2/4/Pre8/8(since 2009 July) + * Echo Fireworks 8/HDMI + * Gibson Robot Interface Pack/GoldTop + + To compile this driver as a module, choose M here: the module + will be called snd-fireworks. + +config SND_BEBOB + tristate "BridgeCo DM1000/DM1100/DM1500 with BeBoB firmware" + select SND_FIREWIRE_LIB + select SND_HWDEP + help + Say Y here to include support for FireWire devices based + on BridgeCo DM1000/DM1100/DM1500 with BeBoB firmware: + * Edirol FA-66/FA-101 + * PreSonus FIREBOX/FIREPOD/FP10/Inspire1394 + * BridgeCo RDAudio1/Audio5 + * Mackie Onyx 1220/1620/1640 (FireWire I/O Card) + * Mackie d.2 (optional FireWire card with DM1000 ASIC) + * Stanton FinalScratch 2 (ScratchAmp) + * Tascam IF-FW/DM + * Behringer XENIX UFX 1204/1604 + * Behringer Digital Mixer X32 series (X-UF Card) + * Behringer FCA610/1616 + * Apogee Rosetta 200/400 (X-FireWire card) + * Apogee DA/AD/DD-16X (X-FireWire card) + * Apogee Ensemble + * ESI QuataFire 610 + * AcousticReality eARMasterOne + * CME MatrixKFW + * Phonic Helix Board 12 MkII/18 MkII/24 MkII + * Phonic Helix Board 12 Universal/18 Universal/24 Universal + * Lynx Aurora 8/16 (LT-FW) + * ICON FireXon + * PrismSound Orpheus/ADA-8XR + * TerraTec PHASE 24 FW/PHASE X24 FW/PHASE 88 Rack FW + * TerraTec EWS MIC2/EWS MIC8 + * TerraTec Aureon 7.1 FireWire + * Yamaha GO44/GO46 + * Focusrite Saffire/Saffire LE/SaffirePro10 IO/SaffirePro26 IO + * M-Audio FireWire410/AudioPhile/Solo + * M-Audio Ozonic/NRV10/ProfireLightBridge + * M-Audio FireWire 1814/ProjectMix IO + * Digidesign Mbox 2 Pro + * ToneWeal FW66 + + To compile this driver as a module, choose M here: the module + will be called snd-bebob. + +config SND_FIREWIRE_DIGI00X + tristate "Digidesign Digi 002/003 family support" + select SND_FIREWIRE_LIB + select SND_HWDEP + help + Say Y here to include support for Digidesign Digi 002/003 family. + * Digi 002 Console + * Digi 002 Rack + * Digi 003 Console + * Digi 003 Rack + * Digi 003 Rack+ + + To compile this driver as a module, choose M here: the module + will be called snd-firewire-digi00x. + +config SND_FIREWIRE_TASCAM + tristate "TASCAM FireWire series support" + select SND_FIREWIRE_LIB + select SND_HWDEP + help + Say Y here to include support for TASCAM. + * FW-1884 + * FW-1082 + * FW-1804 + + To compile this driver as a module, choose M here: the module + will be called snd-firewire-tascam. + +config SND_FIREWIRE_MOTU + tristate "Mark of the unicorn FireWire series support" + select SND_FIREWIRE_LIB + select SND_HWDEP + help + Say Y here to enable support for FireWire devices which MOTU produced: + * 828 + * 896 + * 828mk2 + * 896hd + * Traveler + * Ultralite + * 8pre + * 828mk3 (FireWire only) + * 828mk3 (Hybrid) + * Ultralite mk3 (FireWire only) + * Ultralite mk3 (Hybrid) + * Traveler mk3 + * Audio Express + * Track 16 + * 4pre + + To compile this driver as a module, choose M here: the module + will be called snd-firewire-motu. + +config SND_FIREFACE + tristate "RME Fireface series support" + select SND_FIREWIRE_LIB + select SND_HWDEP + help + Say Y here to include support for RME fireface series. + * Fireface 400 + * Fireface 800 + * Fireface UFX + * Fireface UCX + * Fireface 802 + +endif # SND_FIREWIRE -- cgit v1.2.3