From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- sound/isa/Kconfig | 472 ++++++++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 472 insertions(+) create mode 100644 sound/isa/Kconfig (limited to 'sound/isa/Kconfig') diff --git a/sound/isa/Kconfig b/sound/isa/Kconfig new file mode 100644 index 000000000..6ffa48dd5 --- /dev/null +++ b/sound/isa/Kconfig @@ -0,0 +1,472 @@ +# SPDX-License-Identifier: GPL-2.0-only +# ALSA ISA drivers + +config SND_WSS_LIB + tristate + select SND_PCM + select SND_TIMER + +config SND_SB_COMMON + tristate + +config SND_SB8_DSP + tristate + select SND_PCM + select SND_SB_COMMON + +config SND_SB16_DSP + tristate + select SND_PCM + select SND_SB_COMMON + +menuconfig SND_ISA + bool "ISA sound devices" + depends on ISA || COMPILE_TEST + depends on ISA_DMA_API + default y + help + Support for sound devices connected via the ISA bus. + +if SND_ISA + +config SND_ADLIB + tristate "AdLib FM card" + select SND_OPL3_LIB + help + Say Y here to include support for AdLib FM cards. + + To compile this driver as a module, choose M here: the module + will be called snd-adlib. + +config SND_AD1816A + tristate "Analog Devices SoundPort AD1816A" + depends on PNP + select ISAPNP + select SND_OPL3_LIB + select SND_MPU401_UART + select SND_PCM + select SND_TIMER + help + Say Y here to include support for Analog Devices SoundPort + AD1816A or compatible sound chips. + + To compile this driver as a module, choose M here: the module + will be called snd-ad1816a. + +config SND_AD1848 + tristate "Generic AD1848/CS4248 driver" + select SND_WSS_LIB + help + Say Y here to include support for AD1848 (Analog Devices) or + CS4248 (Cirrus Logic - Crystal Semiconductors) chips. + + For newer chips from Cirrus Logic, use the CS4231 or CS4232+ + drivers. + + To compile this driver as a module, choose M here: the module + will be called snd-ad1848. + +config SND_ALS100 + tristate "Diamond Tech. DT-019x and Avance Logic ALSxxx" + depends on PNP + select ISAPNP + select SND_OPL3_LIB + select SND_MPU401_UART + select SND_SB16_DSP + help + Say Y here to include support for soundcards based on the + Diamond Technologies DT-019X or Avance Logic chips: ALS007, + ALS100, ALS110, ALS120 and ALS200 chips. + + To compile this driver as a module, choose M here: the module + will be called snd-als100. + +config SND_AZT1605 + tristate "Aztech AZT1605 Driver" + depends on SND + select SND_WSS_LIB + select SND_MPU401_UART + select SND_OPL3_LIB + help + Say Y here to include support for Aztech Sound Galaxy cards + based on the AZT1605 chipset. + + To compile this driver as a module, choose M here: the module + will be called snd-azt1605. + +config SND_AZT2316 + tristate "Aztech AZT2316 Driver" + depends on SND + select SND_WSS_LIB + select SND_MPU401_UART + select SND_OPL3_LIB + help + Say Y here to include support for Aztech Sound Galaxy cards + based on the AZT2316 chipset. + + To compile this driver as a module, choose M here: the module + will be called snd-azt2316. + +config SND_AZT2320 + tristate "Aztech Systems AZT2320" + depends on PNP + select ISAPNP + select SND_OPL3_LIB + select SND_MPU401_UART + select SND_WSS_LIB + help + Say Y here to include support for soundcards based on the + Aztech Systems AZT2320 chip. + + To compile this driver as a module, choose M here: the module + will be called snd-azt2320. + +config SND_CMI8328 + tristate "C-Media CMI8328" + select SND_WSS_LIB + select SND_OPL3_LIB + select SND_MPU401_UART + help + Say Y here to include support for soundcards based on the + C-Media CMI8328 chip. + + To compile this driver as a module, choose M here: the module + will be called snd-cmi8328. + +config SND_CMI8330 + tristate "C-Media CMI8330" + select SND_WSS_LIB + select SND_SB16_DSP + select SND_OPL3_LIB + select SND_MPU401_UART + help + Say Y here to include support for soundcards based on the + C-Media CMI8330 chip. + + To compile this driver as a module, choose M here: the module + will be called snd-cmi8330. + +config SND_CS4231 + tristate "Generic Cirrus Logic CS4231 driver" + select SND_MPU401_UART + select SND_WSS_LIB + help + Say Y here to include support for CS4231 chips from Cirrus + Logic - Crystal Semiconductors. + + To compile this driver as a module, choose M here: the module + will be called snd-cs4231. + +config SND_CS4236 + tristate "Generic Cirrus Logic CS4232/CS4236+ driver" + select SND_OPL3_LIB + select SND_MPU401_UART + select SND_WSS_LIB + help + Say Y to include support for CS4232,CS4235,CS4236,CS4237B, + CS4238B,CS4239 chips from Cirrus Logic - Crystal + Semiconductors. + + To compile this driver as a module, choose M here: the module + will be called snd-cs4236. + +config SND_ES1688 + tristate "Generic ESS ES688/ES1688 and ES968 PnP driver" + select SND_OPL3_LIB + select SND_MPU401_UART + select SND_PCM + help + Say Y here to include support for ESS AudioDrive ES688 or + ES1688 chips. Also, this module support cards with ES968 PnP chip. + + To compile this driver as a module, choose M here: the module + will be called snd-es1688. + +config SND_ES18XX + tristate "Generic ESS ES18xx driver" + select SND_OPL3_LIB + select SND_MPU401_UART + select SND_PCM + help + Say Y here to include support for ESS AudioDrive ES18xx chips. + + To compile this driver as a module, choose M here: the module + will be called snd-es18xx. + +config SND_SC6000 + tristate "Gallant SC-6000/6600/7000 and Audio Excel DSP 16" + depends on HAS_IOPORT_MAP + select SND_WSS_LIB + select SND_OPL3_LIB + select SND_MPU401_UART + help + Say Y here to include support for Gallant SC-6000, SC-6600, SC-7000 + cards and clones: + Audio Excel DSP 16 and Zoltrix AV302. + + These cards are based on CompuMedia ASC-9308 or ASC-9408 chips. + + To compile this driver as a module, choose M here: the module + will be called snd-sc6000. + +config SND_GUSCLASSIC + tristate "Gravis UltraSound Classic" + select SND_RAWMIDI + select SND_PCM + select SND_TIMER + help + Say Y here to include support for Gravis UltraSound Classic + soundcards. + + To compile this driver as a module, choose M here: the module + will be called snd-gusclassic. + +config SND_GUSEXTREME + tristate "Gravis UltraSound Extreme" + select SND_OPL3_LIB + select SND_MPU401_UART + select SND_PCM + select SND_TIMER + help + Say Y here to include support for Gravis UltraSound Extreme + soundcards. + + To compile this driver as a module, choose M here: the module + will be called snd-gusextreme. + +config SND_GUSMAX + tristate "Gravis UltraSound MAX" + select SND_RAWMIDI + select SND_WSS_LIB + help + Say Y here to include support for Gravis UltraSound MAX + soundcards. + + To compile this driver as a module, choose M here: the module + will be called snd-gusmax. + +config SND_INTERWAVE + tristate "AMD InterWave, Gravis UltraSound PnP" + depends on PNP + select SND_RAWMIDI + select SND_WSS_LIB + help + Say Y here to include support for AMD InterWave based + soundcards (Gravis UltraSound Plug & Play, STB SoundRage32, + MED3210, Dynasonic Pro, Panasonic PCA761AW). + + To compile this driver as a module, choose M here: the module + will be called snd-interwave. + +config SND_INTERWAVE_STB + tristate "AMD InterWave + TEA6330T (UltraSound 32-Pro)" + depends on PNP + select SND_RAWMIDI + select SND_WSS_LIB + help + Say Y here to include support for AMD InterWave based + soundcards with a TEA6330T bass and treble regulator + (UltraSound 32-Pro). + + To compile this driver as a module, choose M here: the module + will be called snd-interwave-stb. + +config SND_JAZZ16 + tristate "Media Vision Jazz16 card and compatibles" + select SND_OPL3_LIB + select SND_MPU401_UART + select SND_SB8_DSP + help + Say Y here to include support for soundcards based on the + Media Vision Jazz16 chipset: digital chip MVD1216 (Jazz16), + codec MVA416 (CS4216) and mixer MVA514 (ICS2514). + Media Vision's Jazz16 cards were sold under names Pro Sonic 16, + Premium 3-D and Pro 3-D. There were also OEMs cards with the + Jazz16 chipset. + + To compile this driver as a module, choose M here: the module + will be called snd-jazz16. + +config SND_OPL3SA2 + tristate "Yamaha OPL3-SA2/SA3" + select SND_OPL3_LIB + select SND_MPU401_UART + select SND_WSS_LIB + help + Say Y here to include support for Yamaha OPL3-SA2 and OPL3-SA3 + chips. + + To compile this driver as a module, choose M here: the module + will be called snd-opl3sa2. + +config SND_OPTI92X_AD1848 + tristate "OPTi 82C92x - AD1848" + select SND_OPL3_LIB + select SND_OPL4_LIB + select SND_MPU401_UART + select SND_WSS_LIB + help + Say Y here to include support for soundcards based on Opti + 82C92x or OTI-601 chips and using an AD1848 codec. + + To compile this driver as a module, choose M here: the module + will be called snd-opti92x-ad1848. + +config SND_OPTI92X_CS4231 + tristate "OPTi 82C92x - CS4231" + select SND_OPL3_LIB + select SND_OPL4_LIB + select SND_MPU401_UART + select SND_WSS_LIB + help + Say Y here to include support for soundcards based on Opti + 82C92x chips and using a CS4231 codec. + + To compile this driver as a module, choose M here: the module + will be called snd-opti92x-cs4231. + +config SND_OPTI93X + tristate "OPTi 82C93x" + select SND_OPL3_LIB + select SND_MPU401_UART + select SND_WSS_LIB + help + Say Y here to include support for soundcards based on Opti + 82C93x chips. + + To compile this driver as a module, choose M here: the module + will be called snd-opti93x. + +config SND_MIRO + tristate "Miro miroSOUND PCM1pro/PCM12/PCM20radio driver" + select SND_OPL4_LIB + select SND_WSS_LIB + select SND_MPU401_UART + select SND_PCM + help + Say 'Y' or 'M' to include support for Miro miroSOUND PCM1 pro, + miroSOUND PCM12 and miroSOUND PCM20 Radio soundcards. + + To compile this driver as a module, choose M here: the module + will be called snd-miro. + +config SND_SB8 + tristate "Sound Blaster 1.0/2.0/Pro (8-bit)" + select SND_OPL3_LIB + select SND_RAWMIDI + select SND_SB8_DSP + help + Say Y here to include support for Creative Sound Blaster 1.0/ + 2.0/Pro (8-bit) or 100% compatible soundcards. + + To compile this driver as a module, choose M here: the module + will be called snd-sb8. + +config SND_SB16 + tristate "Sound Blaster 16 (PnP)" + select SND_OPL3_LIB + select SND_MPU401_UART + select SND_SB16_DSP + help + Say Y here to include support for Sound Blaster 16 soundcards + (including the Plug and Play version). + + To compile this driver as a module, choose M here: the module + will be called snd-sb16. + +config SND_SBAWE + tristate "Sound Blaster AWE (32,64) (PnP)" + select SND_OPL3_LIB + select SND_MPU401_UART + select SND_SB16_DSP + select SND_SEQ_DEVICE if SND_SEQUENCER != n + help + Say Y here to include support for Sound Blaster AWE soundcards + (including the Plug and Play version). + + To compile this driver as a module, choose M here: the module + will be called snd-sbawe. + +# select SEQ stuff to min(SND_SEQUENCER,SND_XXX) +config SND_SBAWE_SEQ + def_tristate SND_SEQUENCER && SND_SBAWE + select SND_SEQ_MIDI_EMUL + select SND_SEQ_VIRMIDI + select SND_SYNTH_EMUX + +config SND_SB16_CSP + bool "Sound Blaster 16/AWE CSP support" + depends on (SND_SB16 || SND_SBAWE) && (BROKEN || !PPC) + select FW_LOADER + help + Say Y here to include support for the CSP core. This special + coprocessor can do variable tasks like various compression and + decompression algorithms. + +config SND_SSCAPE + tristate "Ensoniq SoundScape driver" + select SND_MPU401_UART + select SND_WSS_LIB + select FW_LOADER + help + Say Y here to include support for Ensoniq SoundScape + and Ensoniq OEM soundcards. + + The PCM audio is supported on SoundScape Classic, Elite, PnP + and VIVO cards. The supported OEM cards are SPEA Media FX and + Reveal SC-600. + The MIDI support is very experimental and requires binary + firmware files called "scope.cod" and "sndscape.co?" where the + ? is digit 0, 1, 2, 3 or 4. The firmware files can be found + in DOS or Windows driver packages. One has to put the firmware + files into the /lib/firmware directory. + + To compile this driver as a module, choose M here: the module + will be called snd-sscape. + +config SND_WAVEFRONT + tristate "Turtle Beach Maui,Tropez,Tropez+ (Wavefront)" + select FW_LOADER + select SND_OPL3_LIB + select SND_MPU401_UART + select SND_WSS_LIB + help + Say Y here to include support for Turtle Beach Maui, Tropez + and Tropez+ soundcards based on the Wavefront chip. + + To compile this driver as a module, choose M here: the module + will be called snd-wavefront. + +config SND_MSND_PINNACLE + tristate "Turtle Beach MultiSound Pinnacle/Fiji driver" + depends on X86 + select FW_LOADER + select SND_MPU401_UART + select SND_PCM + help + Say Y to include support for Turtle Beach MultiSound Pinnacle/ + Fiji soundcards. + + To compile this driver as a module, choose M here: the module + will be called snd-msnd-pinnacle. + +config SND_MSND_CLASSIC + tristate "Support for Turtle Beach MultiSound Classic, Tahiti, Monterey" + depends on X86 + select FW_LOADER + select SND_MPU401_UART + select SND_PCM + help + Say M here if you have a Turtle Beach MultiSound Classic, Tahiti or + Monterey (not for the Pinnacle or Fiji). + + See for important information + about this driver. Note that it has been discontinued, but the + Voyetra Turtle Beach knowledge base entry for it is still available + at . + + To compile this driver as a module, choose M here: the module + will be called snd-msnd-classic. + +endif # SND_ISA + -- cgit v1.2.3