From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- sound/pci/cs5535audio/cs5535audio_olpc.c | 187 +++++++++++++++++++++++++++++++ 1 file changed, 187 insertions(+) create mode 100644 sound/pci/cs5535audio/cs5535audio_olpc.c (limited to 'sound/pci/cs5535audio/cs5535audio_olpc.c') diff --git a/sound/pci/cs5535audio/cs5535audio_olpc.c b/sound/pci/cs5535audio/cs5535audio_olpc.c new file mode 100644 index 000000000..122170a41 --- /dev/null +++ b/sound/pci/cs5535audio/cs5535audio_olpc.c @@ -0,0 +1,187 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * OLPC XO-1 additional sound features + * + * Copyright © 2006 Jaya Kumar + * Copyright © 2007-2008 Andres Salomon + */ +#include +#include +#include +#include +#include + +#include +#include "cs5535audio.h" + +#define DRV_NAME "cs5535audio-olpc" + +/* + * OLPC has an additional feature on top of the regular AD1888 codec features. + * It has an Analog Input mode that is switched into (after disabling the + * High Pass Filter) via GPIO. It is supported on B2 and later models. + */ +void olpc_analog_input(struct snd_ac97 *ac97, int on) +{ + int err; + + if (!machine_is_olpc()) + return; + + /* update the High Pass Filter (via AC97_AD_TEST2) */ + err = snd_ac97_update_bits(ac97, AC97_AD_TEST2, + 1 << AC97_AD_HPFD_SHIFT, on << AC97_AD_HPFD_SHIFT); + if (err < 0) { + dev_err(ac97->bus->card->dev, + "setting High Pass Filter - %d\n", err); + return; + } + + /* set Analog Input through GPIO */ + gpio_set_value(OLPC_GPIO_MIC_AC, on); +} + +/* + * OLPC XO-1's V_REFOUT is a mic bias enable. + */ +void olpc_mic_bias(struct snd_ac97 *ac97, int on) +{ + int err; + + if (!machine_is_olpc()) + return; + + on = on ? 0 : 1; + err = snd_ac97_update_bits(ac97, AC97_AD_MISC, + 1 << AC97_AD_VREFD_SHIFT, on << AC97_AD_VREFD_SHIFT); + if (err < 0) + dev_err(ac97->bus->card->dev, "setting MIC Bias - %d\n", err); +} + +static int olpc_dc_info(struct snd_kcontrol *kctl, + struct snd_ctl_elem_info *uinfo) +{ + uinfo->type = SNDRV_CTL_ELEM_TYPE_BOOLEAN; + uinfo->count = 1; + uinfo->value.integer.min = 0; + uinfo->value.integer.max = 1; + return 0; +} + +static int olpc_dc_get(struct snd_kcontrol *kctl, struct snd_ctl_elem_value *v) +{ + v->value.integer.value[0] = gpio_get_value(OLPC_GPIO_MIC_AC); + return 0; +} + +static int olpc_dc_put(struct snd_kcontrol *kctl, struct snd_ctl_elem_value *v) +{ + struct cs5535audio *cs5535au = snd_kcontrol_chip(kctl); + + olpc_analog_input(cs5535au->ac97, v->value.integer.value[0]); + return 1; +} + +static int olpc_mic_info(struct snd_kcontrol *kctl, + struct snd_ctl_elem_info *uinfo) +{ + uinfo->type = SNDRV_CTL_ELEM_TYPE_BOOLEAN; + uinfo->count = 1; + uinfo->value.integer.min = 0; + uinfo->value.integer.max = 1; + return 0; +} + +static int olpc_mic_get(struct snd_kcontrol *kctl, struct snd_ctl_elem_value *v) +{ + struct cs5535audio *cs5535au = snd_kcontrol_chip(kctl); + struct snd_ac97 *ac97 = cs5535au->ac97; + int i; + + i = (snd_ac97_read(ac97, AC97_AD_MISC) >> AC97_AD_VREFD_SHIFT) & 0x1; + v->value.integer.value[0] = i ? 0 : 1; + return 0; +} + +static int olpc_mic_put(struct snd_kcontrol *kctl, struct snd_ctl_elem_value *v) +{ + struct cs5535audio *cs5535au = snd_kcontrol_chip(kctl); + + olpc_mic_bias(cs5535au->ac97, v->value.integer.value[0]); + return 1; +} + +static const struct snd_kcontrol_new olpc_cs5535audio_ctls[] = { +{ + .iface = SNDRV_CTL_ELEM_IFACE_MIXER, + .name = "DC Mode Enable", + .info = olpc_dc_info, + .get = olpc_dc_get, + .put = olpc_dc_put, + .private_value = 0, +}, +{ + .iface = SNDRV_CTL_ELEM_IFACE_MIXER, + .name = "MIC Bias Enable", + .info = olpc_mic_info, + .get = olpc_mic_get, + .put = olpc_mic_put, + .private_value = 0, +}, +}; + +void olpc_prequirks(struct snd_card *card, + struct snd_ac97_template *ac97) +{ + if (!machine_is_olpc()) + return; + + /* invert EAPD if on an OLPC B3 or higher */ + if (olpc_board_at_least(olpc_board_pre(0xb3))) + ac97->scaps |= AC97_SCAP_INV_EAPD; +} + +int olpc_quirks(struct snd_card *card, struct snd_ac97 *ac97) +{ + struct snd_ctl_elem_id elem; + int i, err; + + if (!machine_is_olpc()) + return 0; + + if (gpio_request(OLPC_GPIO_MIC_AC, DRV_NAME)) { + dev_err(card->dev, "unable to allocate MIC GPIO\n"); + return -EIO; + } + gpio_direction_output(OLPC_GPIO_MIC_AC, 0); + + /* drop the original AD1888 HPF control */ + memset(&elem, 0, sizeof(elem)); + elem.iface = SNDRV_CTL_ELEM_IFACE_MIXER; + strscpy(elem.name, "High Pass Filter Enable", sizeof(elem.name)); + snd_ctl_remove_id(card, &elem); + + /* drop the original V_REFOUT control */ + memset(&elem, 0, sizeof(elem)); + elem.iface = SNDRV_CTL_ELEM_IFACE_MIXER; + strscpy(elem.name, "V_REFOUT Enable", sizeof(elem.name)); + snd_ctl_remove_id(card, &elem); + + /* add the OLPC-specific controls */ + for (i = 0; i < ARRAY_SIZE(olpc_cs5535audio_ctls); i++) { + err = snd_ctl_add(card, snd_ctl_new1(&olpc_cs5535audio_ctls[i], + ac97->private_data)); + if (err < 0) + return err; + } + + /* turn off the mic by default */ + olpc_mic_bias(ac97, 0); + return 0; +} + +void olpc_quirks_cleanup(void) +{ + if (machine_is_olpc()) + gpio_free(OLPC_GPIO_MIC_AC); +} -- cgit v1.2.3