From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- sound/pci/hda/Kconfig | 307 ++++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 307 insertions(+) create mode 100644 sound/pci/hda/Kconfig (limited to 'sound/pci/hda/Kconfig') diff --git a/sound/pci/hda/Kconfig b/sound/pci/hda/Kconfig new file mode 100644 index 000000000..06d304db4 --- /dev/null +++ b/sound/pci/hda/Kconfig @@ -0,0 +1,307 @@ +# SPDX-License-Identifier: GPL-2.0-only +menu "HD-Audio" + +config SND_HDA + tristate + select SND_PCM + select SND_VMASTER + select SND_JACK + select SND_HDA_CORE + +config SND_HDA_GENERIC_LEDS + bool + +config SND_HDA_INTEL + tristate "HD Audio PCI" + depends on SND_PCI + select SND_HDA + select SND_INTEL_DSP_CONFIG + help + Say Y here to include support for Intel "High Definition + Audio" (Azalia) and its compatible devices. + + This option enables the HD-audio controller. Don't forget + to choose the appropriate codec options below. + + To compile this driver as a module, choose M here: the module + will be called snd-hda-intel. + +config SND_HDA_TEGRA + tristate "NVIDIA Tegra HD Audio" + depends on ARCH_TEGRA + select SND_HDA + select SND_HDA_ALIGNED_MMIO + help + Say Y here to support the HDA controller present in NVIDIA + Tegra SoCs + + This options enables support for the HD Audio controller + present in some NVIDIA Tegra SoCs, used to communicate audio + to the HDMI output. + + To compile this driver as a module, choose M here: the module + will be called snd-hda-tegra. + +if SND_HDA + +config SND_HDA_HWDEP + bool "Build hwdep interface for HD-audio driver" + select SND_HWDEP + help + Say Y here to build a hwdep interface for HD-audio driver. + This interface can be used for out-of-band communication + with codecs for debugging purposes. + +config SND_HDA_RECONFIG + bool "Allow dynamic codec reconfiguration" + help + Say Y here to enable the HD-audio codec re-configuration feature. + It allows user to clear the whole codec configuration, change the + codec setup, add extra verbs, and re-configure the codec dynamically. + + Note that this item alone doesn't provide the sysfs interface, but + enables the feature just for the patch loader below. + If you need the traditional sysfs entries for the manual interaction, + turn on CONFIG_SND_HDA_HWDEP as well. + +config SND_HDA_INPUT_BEEP + bool "Support digital beep via input layer" + depends on INPUT=y || INPUT=SND_HDA + help + Say Y here to build a digital beep interface for HD-audio + driver. This interface is used to generate digital beeps. + +config SND_HDA_INPUT_BEEP_MODE + int "Digital beep registration mode (0=off, 1=on)" + depends on SND_HDA_INPUT_BEEP=y + default "1" + range 0 1 + help + Set 0 to disable the digital beep interface for HD-audio by default. + Set 1 to always enable the digital beep interface for HD-audio by + default. + +config SND_HDA_PATCH_LOADER + bool "Support initialization patch loading for HD-audio" + select FW_LOADER + select SND_HDA_RECONFIG + help + Say Y here to allow the HD-audio driver to load a pseudo + firmware file ("patch") for overriding the BIOS setup at + start up. The "patch" file can be specified via patch module + option, such as patch=hda-init. + +config SND_HDA_SCODEC_CS35L41 + tristate + select SND_HDA_GENERIC + select REGMAP_IRQ + +config SND_HDA_CS_DSP_CONTROLS + tristate + select FW_CS_DSP + +config SND_HDA_SCODEC_CS35L41_I2C + tristate "Build CS35L41 HD-audio side codec support for I2C Bus" + depends on I2C + depends on ACPI + depends on SND_SOC + select SND_SOC_CS35L41_LIB + select SND_HDA_SCODEC_CS35L41 + select SND_HDA_CS_DSP_CONTROLS + help + Say Y or M here to include CS35L41 I2C HD-audio side codec support + in snd-hda-intel driver, such as ALC287. + +comment "Set to Y if you want auto-loading the side codec driver" + depends on SND_HDA=y && SND_HDA_SCODEC_CS35L41_I2C=m + +config SND_HDA_SCODEC_CS35L41_SPI + tristate "Build CS35L41 HD-audio codec support for SPI Bus" + depends on SPI_MASTER + depends on ACPI + depends on SND_SOC + select SND_SOC_CS35L41_LIB + select SND_HDA_SCODEC_CS35L41 + select SND_HDA_CS_DSP_CONTROLS + help + Say Y or M here to include CS35L41 SPI HD-audio side codec support + in snd-hda-intel driver, such as ALC287. + +comment "Set to Y if you want auto-loading the side codec driver" + depends on SND_HDA=y && SND_HDA_SCODEC_CS35L41_SPI=m + +config SND_HDA_CODEC_REALTEK + tristate "Build Realtek HD-audio codec support" + select SND_HDA_GENERIC + select SND_HDA_GENERIC_LEDS + help + Say Y or M here to include Realtek HD-audio codec support in + snd-hda-intel driver, such as ALC880. + +comment "Set to Y if you want auto-loading the codec driver" + depends on SND_HDA=y && SND_HDA_CODEC_REALTEK=m + +config SND_HDA_CODEC_ANALOG + tristate "Build Analog Devices HD-audio codec support" + select SND_HDA_GENERIC + help + Say Y or M here to include Analog Devices HD-audio codec support in + snd-hda-intel driver, such as AD1986A. + +comment "Set to Y if you want auto-loading the codec driver" + depends on SND_HDA=y && SND_HDA_CODEC_ANALOG=m + +config SND_HDA_CODEC_SIGMATEL + tristate "Build IDT/Sigmatel HD-audio codec support" + select SND_HDA_GENERIC + select SND_HDA_GENERIC_LEDS + help + Say Y or M here to include IDT (Sigmatel) HD-audio codec support in + snd-hda-intel driver, such as STAC9200. + +comment "Set to Y if you want auto-loading the codec driver" + depends on SND_HDA=y && SND_HDA_CODEC_SIGMATEL=m + +config SND_HDA_CODEC_VIA + tristate "Build VIA HD-audio codec support" + select SND_HDA_GENERIC + help + Say Y or M here to include VIA HD-audio codec support in + snd-hda-intel driver, such as VT1708. + +comment "Set to Y if you want auto-loading the codec driver" + depends on SND_HDA=y && SND_HDA_CODEC_VIA=m + +config SND_HDA_CODEC_HDMI + tristate "Build HDMI/DisplayPort HD-audio codec support" + select SND_DYNAMIC_MINORS + help + Say Y or M here to include HDMI and DisplayPort HD-audio codec + support in snd-hda-intel driver. This includes all AMD/ATI, + Intel and Nvidia HDMI/DisplayPort codecs. + + Note that this option mandatorily enables CONFIG_SND_DYNAMIC_MINORS + to assure the multiple streams for DP-MST support. + +comment "Set to Y if you want auto-loading the codec driver" + depends on SND_HDA=y && SND_HDA_CODEC_HDMI=m + +config SND_HDA_CODEC_CIRRUS + tristate "Build Cirrus Logic codec support" + select SND_HDA_GENERIC + help + Say Y or M here to include Cirrus Logic codec support in + snd-hda-intel driver, such as CS4206. + +comment "Set to Y if you want auto-loading the codec driver" + depends on SND_HDA=y && SND_HDA_CODEC_CIRRUS=m + +config SND_HDA_CODEC_CS8409 + tristate "Build Cirrus Logic HDA bridge support" + select SND_HDA_GENERIC + help + Say Y or M here to include Cirrus Logic HDA bridge support in + snd-hda-intel driver, such as CS8409. + +comment "Set to Y if you want auto-loading the codec driver" + depends on SND_HDA=y && SND_HDA_CODEC_CS8409=m + +config SND_HDA_CODEC_CONEXANT + tristate "Build Conexant HD-audio codec support" + select SND_HDA_GENERIC + select SND_HDA_GENERIC_LEDS + help + Say Y or M here to include Conexant HD-audio codec support in + snd-hda-intel driver, such as CX20549. + +comment "Set to Y if you want auto-loading the codec driver" + depends on SND_HDA=y && SND_HDA_CODEC_CONEXANT=m + +config SND_HDA_CODEC_CA0110 + tristate "Build Creative CA0110-IBG codec support" + select SND_HDA_GENERIC + help + Say Y or M here to include Creative CA0110-IBG codec support in + snd-hda-intel driver, found on some Creative X-Fi cards. + +comment "Set to Y if you want auto-loading the codec driver" + depends on SND_HDA=y && SND_HDA_CODEC_CA0110=m + +config SND_HDA_CODEC_CA0132 + tristate "Build Creative CA0132 codec support" + help + Say Y or M here to include Creative CA0132 codec support in + snd-hda-intel driver. + +comment "Set to Y if you want auto-loading the codec driver" + depends on SND_HDA=y && SND_HDA_CODEC_CA0132=m + +config SND_HDA_CODEC_CA0132_DSP + bool "Support new DSP code for CA0132 codec" + depends on SND_HDA_CODEC_CA0132 + default y + select SND_HDA_DSP_LOADER + select FW_LOADER + help + Say Y here to enable the DSP for Creative CA0132 for extended + features like equalizer or echo cancellation. + + Note that this option requires the external firmware file + (ctefx.bin). + +config SND_HDA_CODEC_CMEDIA + tristate "Build C-Media HD-audio codec support" + select SND_HDA_GENERIC + help + Say Y or M here to include C-Media HD-audio codec support in + snd-hda-intel driver, such as CMI9880. + +comment "Set to Y if you want auto-loading the codec driver" + depends on SND_HDA=y && SND_HDA_CODEC_CMEDIA=m + +config SND_HDA_CODEC_SI3054 + tristate "Build Silicon Labs 3054 HD-modem codec support" + help + Say Y or M here to include Silicon Labs 3054 HD-modem codec + (and compatibles) support in snd-hda-intel driver. + +comment "Set to Y if you want auto-loading the codec driver" + depends on SND_HDA=y && SND_HDA_CODEC_SI3054=m + +config SND_HDA_GENERIC + tristate "Enable generic HD-audio codec parser" + select SND_CTL_LED if SND_HDA_GENERIC_LEDS + select LEDS_CLASS if SND_HDA_GENERIC_LEDS + help + Say Y or M here to enable the generic HD-audio codec parser + in snd-hda-intel driver. + +comment "Set to Y if you want auto-loading the codec driver" + depends on SND_HDA=y && SND_HDA_GENERIC=m + +config SND_HDA_POWER_SAVE_DEFAULT + int "Default time-out for HD-audio power-save mode" + depends on PM + default 0 + help + The default time-out value in seconds for HD-audio automatic + power-save mode. 0 means to disable the power-save mode. + +config SND_HDA_INTEL_HDMI_SILENT_STREAM + bool "Enable Silent Stream always for HDMI" + depends on SND_HDA_INTEL + help + Say Y to enable HD-Audio Keep Alive (KAE) aka Silent Stream + for HDMI on hardware that supports the feature. + + When enabled, the HDMI/DisplayPort codec will continue to provide + a continuous clock and a valid but silent data stream to + any connected external receiver. This allows to avoid gaps + at start of playback. Many receivers require multiple seconds + to start playing audio after the clock has been stopped. + This feature can impact power consumption as resources + are kept reserved both at transmitter and receiver. + +endif + +endmenu -- cgit v1.2.3