From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- sound/pci/lx6464es/lx_defs.h | 361 +++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 361 insertions(+) create mode 100644 sound/pci/lx6464es/lx_defs.h (limited to 'sound/pci/lx6464es/lx_defs.h') diff --git a/sound/pci/lx6464es/lx_defs.h b/sound/pci/lx6464es/lx_defs.h new file mode 100644 index 000000000..eca5367ba --- /dev/null +++ b/sound/pci/lx6464es/lx_defs.h @@ -0,0 +1,361 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ +/* -*- linux-c -*- * + * + * ALSA driver for the digigram lx6464es interface + * adapted upstream headers + * + * Copyright (c) 2009 Tim Blechmann + */ + +#ifndef LX_DEFS_H +#define LX_DEFS_H + +/* code adapted from ethersound.h */ +#define XES_FREQ_COUNT8_MASK 0x00001FFF /* compteur 25MHz entre 8 ech. */ +#define XES_FREQ_COUNT8_44_MIN 0x00001288 /* 25M / + * [ 44k - ( 44.1k + 48k ) / 2 ] + * * 8 */ +#define XES_FREQ_COUNT8_44_MAX 0x000010F0 /* 25M / [ ( 44.1k + 48k ) / 2 ] + * * 8 */ +#define XES_FREQ_COUNT8_48_MAX 0x00000F08 /* 25M / + * [ 48k + ( 44.1k + 48k ) / 2 ] + * * 8 */ + +/* code adapted from LXES_registers.h */ + +#define IOCR_OUTPUTS_OFFSET 0 /* (rw) offset for the number of OUTs in the + * ConfES register. */ +#define IOCR_INPUTS_OFFSET 8 /* (rw) offset for the number of INs in the + * ConfES register. */ +#define FREQ_RATIO_OFFSET 19 /* (rw) offset for frequency ratio in the + * ConfES register. */ +#define FREQ_RATIO_SINGLE_MODE 0x01 /* value for single mode frequency ratio: + * sample rate = frequency rate. */ + +#define CONFES_READ_PART_MASK 0x00070000 +#define CONFES_WRITE_PART_MASK 0x00F80000 + +/* code adapted from if_drv_mb.h */ + +#define MASK_SYS_STATUS_ERROR (1L << 31) /* events that lead to a PCI irq if + * not yet pending */ +#define MASK_SYS_STATUS_URUN (1L << 30) +#define MASK_SYS_STATUS_ORUN (1L << 29) +#define MASK_SYS_STATUS_EOBO (1L << 28) +#define MASK_SYS_STATUS_EOBI (1L << 27) +#define MASK_SYS_STATUS_FREQ (1L << 26) +#define MASK_SYS_STATUS_ESA (1L << 25) /* reserved, this is set by the + * XES */ +#define MASK_SYS_STATUS_TIMER (1L << 24) + +#define MASK_SYS_ASYNC_EVENTS (MASK_SYS_STATUS_ERROR | \ + MASK_SYS_STATUS_URUN | \ + MASK_SYS_STATUS_ORUN | \ + MASK_SYS_STATUS_EOBO | \ + MASK_SYS_STATUS_EOBI | \ + MASK_SYS_STATUS_FREQ | \ + MASK_SYS_STATUS_ESA) + +#define MASK_SYS_PCI_EVENTS (MASK_SYS_ASYNC_EVENTS | \ + MASK_SYS_STATUS_TIMER) + +#define MASK_SYS_TIMER_COUNT 0x0000FFFF + +#define MASK_SYS_STATUS_EOT_PLX (1L << 22) /* event that remains + * internal: reserved fo end + * of plx dma */ +#define MASK_SYS_STATUS_XES (1L << 21) /* event that remains + * internal: pending XES + * IRQ */ +#define MASK_SYS_STATUS_CMD_DONE (1L << 20) /* alternate command + * management: notify driver + * instead of polling */ + + +#define MAX_STREAM_BUFFER 5 /* max amount of stream buffers. */ + +#define MICROBLAZE_IBL_MIN 32 +#define MICROBLAZE_IBL_DEFAULT 128 +#define MICROBLAZE_IBL_MAX 512 +/* #define MASK_GRANULARITY (2*MICROBLAZE_IBL_MAX-1) */ + + + +/* command opcodes, see reference for details */ + +/* + the capture bit position in the object_id field in driver commands + depends upon the number of managed channels. For now, 64 IN + 64 OUT are + supported. HOwever, the communication protocol forsees 1024 channels, hence + bit 10 indicates a capture (input) object). +*/ +#define ID_IS_CAPTURE (1L << 10) +#define ID_OFFSET 13 /* object ID is at the 13th bit in the + * 1st command word.*/ +#define ID_CH_MASK 0x3F +#define OPCODE_OFFSET 24 /* offset of the command opcode in the first + * command word.*/ + +enum cmd_mb_opcodes { + CMD_00_INFO_DEBUG = 0x00, + CMD_01_GET_SYS_CFG = 0x01, + CMD_02_SET_GRANULARITY = 0x02, + CMD_03_SET_TIMER_IRQ = 0x03, + CMD_04_GET_EVENT = 0x04, + CMD_05_GET_PIPES = 0x05, + + CMD_06_ALLOCATE_PIPE = 0x06, + CMD_07_RELEASE_PIPE = 0x07, + CMD_08_ASK_BUFFERS = 0x08, + CMD_09_STOP_PIPE = 0x09, + CMD_0A_GET_PIPE_SPL_COUNT = 0x0a, + CMD_0B_TOGGLE_PIPE_STATE = 0x0b, + + CMD_0C_DEF_STREAM = 0x0c, + CMD_0D_SET_MUTE = 0x0d, + CMD_0E_GET_STREAM_SPL_COUNT = 0x0e, + CMD_0F_UPDATE_BUFFER = 0x0f, + CMD_10_GET_BUFFER = 0x10, + CMD_11_CANCEL_BUFFER = 0x11, + CMD_12_GET_PEAK = 0x12, + CMD_13_SET_STREAM_STATE = 0x13, + CMD_14_INVALID = 0x14, +}; + +/* pipe states */ +enum pipe_state_t { + PSTATE_IDLE = 0, /* the pipe is not processed in the XES_IRQ + * (free or stopped, or paused). */ + PSTATE_RUN = 1, /* sustained play/record state. */ + PSTATE_PURGE = 2, /* the ES channels are now off, render pipes do + * not DMA, record pipe do a last DMA. */ + PSTATE_ACQUIRE = 3, /* the ES channels are now on, render pipes do + * not yet increase their sample count, record + * pipes do not DMA. */ + PSTATE_CLOSING = 4, /* the pipe is releasing, and may not yet + * receive an "alloc" command. */ +}; + +/* stream states */ +enum stream_state_t { + SSTATE_STOP = 0x00, /* setting to stop resets the stream spl + * count.*/ + SSTATE_RUN = (0x01 << 0), /* start DMA and spl count handling. */ + SSTATE_PAUSE = (0x01 << 1), /* pause DMA and spl count handling. */ +}; + +/* buffer flags */ +enum buffer_flags { + BF_VALID = 0x80, /* set if the buffer is valid, clear if free.*/ + BF_CURRENT = 0x40, /* set if this is the current buffer (there is + * always a current buffer).*/ + BF_NOTIFY_EOB = 0x20, /* set if this buffer must cause a PCI event + * when finished.*/ + BF_CIRCULAR = 0x10, /* set if buffer[1] must be copied to buffer[0] + * by the end of this buffer.*/ + BF_64BITS_ADR = 0x08, /* set if the hi part of the address is valid.*/ + BF_xx = 0x04, /* future extension.*/ + BF_EOB = 0x02, /* set if finished, but not yet free.*/ + BF_PAUSE = 0x01, /* pause stream at buffer end.*/ + BF_ZERO = 0x00, /* no flags (init).*/ +}; + +/* +* Stream Flags definitions +*/ +enum stream_flags { + SF_ZERO = 0x00000000, /* no flags (stream invalid). */ + SF_VALID = 0x10000000, /* the stream has a valid DMA_conf + * info (setstreamformat). */ + SF_XRUN = 0x20000000, /* the stream is un x-run state. */ + SF_START = 0x40000000, /* the DMA is running.*/ + SF_ASIO = 0x80000000, /* ASIO.*/ +}; + + +#define MASK_SPL_COUNT_HI 0x00FFFFFF /* 4 MSBits are status bits */ +#define PSTATE_OFFSET 28 /* 4 MSBits are status bits */ + + +#define MASK_STREAM_HAS_MAPPING (1L << 12) +#define MASK_STREAM_IS_ASIO (1L << 9) +#define STREAM_FMT_OFFSET 10 /* the stream fmt bits start at the 10th + * bit in the command word. */ + +#define STREAM_FMT_16b 0x02 +#define STREAM_FMT_intel 0x01 + +#define FREQ_FIELD_OFFSET 15 /* offset of the freq field in the response + * word */ + +#define BUFF_FLAGS_OFFSET 24 /* offset of the buffer flags in the + * response word. */ +#define MASK_DATA_SIZE 0x00FFFFFF /* this must match the field size of + * datasize in the buffer_t structure. */ + +#define MASK_BUFFER_ID 0xFF /* the cancel command awaits a buffer ID, + * may be 0xFF for "current". */ + + +/* code adapted from PcxErr_e.h */ + +/* Bits masks */ + +#define ERROR_MASK 0x8000 + +#define SOURCE_MASK 0x7800 + +#define E_SOURCE_BOARD 0x4000 /* 8 >> 1 */ +#define E_SOURCE_DRV 0x2000 /* 4 >> 1 */ +#define E_SOURCE_API 0x1000 /* 2 >> 1 */ +/* Error tools */ +#define E_SOURCE_TOOLS 0x0800 /* 1 >> 1 */ +/* Error pcxaudio */ +#define E_SOURCE_AUDIO 0x1800 /* 3 >> 1 */ +/* Error virtual pcx */ +#define E_SOURCE_VPCX 0x2800 /* 5 >> 1 */ +/* Error dispatcher */ +#define E_SOURCE_DISPATCHER 0x3000 /* 6 >> 1 */ +/* Error from CobraNet firmware */ +#define E_SOURCE_COBRANET 0x3800 /* 7 >> 1 */ + +#define E_SOURCE_USER 0x7800 + +#define CLASS_MASK 0x0700 + +#define CODE_MASK 0x00FF + +/* Bits values */ + +/* Values for the error/warning bit */ +#define ERROR_VALUE 0x8000 +#define WARNING_VALUE 0x0000 + +/* Class values */ +#define E_CLASS_GENERAL 0x0000 +#define E_CLASS_INVALID_CMD 0x0100 +#define E_CLASS_INVALID_STD_OBJECT 0x0200 +#define E_CLASS_RSRC_IMPOSSIBLE 0x0300 +#define E_CLASS_WRONG_CONTEXT 0x0400 +#define E_CLASS_BAD_SPECIFIC_PARAMETER 0x0500 +#define E_CLASS_REAL_TIME_ERROR 0x0600 +#define E_CLASS_DIRECTSHOW 0x0700 +#define E_CLASS_FREE 0x0700 + + +/* Complete DRV error code for the general class */ +#define ED_GN (ERROR_VALUE | E_SOURCE_DRV | E_CLASS_GENERAL) +#define ED_CONCURRENCY (ED_GN | 0x01) +#define ED_DSP_CRASHED (ED_GN | 0x02) +#define ED_UNKNOWN_BOARD (ED_GN | 0x03) +#define ED_NOT_INSTALLED (ED_GN | 0x04) +#define ED_CANNOT_OPEN_SVC_MANAGER (ED_GN | 0x05) +#define ED_CANNOT_READ_REGISTRY (ED_GN | 0x06) +#define ED_DSP_VERSION_MISMATCH (ED_GN | 0x07) +#define ED_UNAVAILABLE_FEATURE (ED_GN | 0x08) +#define ED_CANCELLED (ED_GN | 0x09) +#define ED_NO_RESPONSE_AT_IRQA (ED_GN | 0x10) +#define ED_INVALID_ADDRESS (ED_GN | 0x11) +#define ED_DSP_CORRUPTED (ED_GN | 0x12) +#define ED_PENDING_OPERATION (ED_GN | 0x13) +#define ED_NET_ALLOCATE_MEMORY_IMPOSSIBLE (ED_GN | 0x14) +#define ED_NET_REGISTER_ERROR (ED_GN | 0x15) +#define ED_NET_THREAD_ERROR (ED_GN | 0x16) +#define ED_NET_OPEN_ERROR (ED_GN | 0x17) +#define ED_NET_CLOSE_ERROR (ED_GN | 0x18) +#define ED_NET_NO_MORE_PACKET (ED_GN | 0x19) +#define ED_NET_NO_MORE_BUFFER (ED_GN | 0x1A) +#define ED_NET_SEND_ERROR (ED_GN | 0x1B) +#define ED_NET_RECEIVE_ERROR (ED_GN | 0x1C) +#define ED_NET_WRONG_MSG_SIZE (ED_GN | 0x1D) +#define ED_NET_WAIT_ERROR (ED_GN | 0x1E) +#define ED_NET_EEPROM_ERROR (ED_GN | 0x1F) +#define ED_INVALID_RS232_COM_NUMBER (ED_GN | 0x20) +#define ED_INVALID_RS232_INIT (ED_GN | 0x21) +#define ED_FILE_ERROR (ED_GN | 0x22) +#define ED_INVALID_GPIO_CMD (ED_GN | 0x23) +#define ED_RS232_ALREADY_OPENED (ED_GN | 0x24) +#define ED_RS232_NOT_OPENED (ED_GN | 0x25) +#define ED_GPIO_ALREADY_OPENED (ED_GN | 0x26) +#define ED_GPIO_NOT_OPENED (ED_GN | 0x27) +#define ED_REGISTRY_ERROR (ED_GN | 0x28) /* <- NCX */ +#define ED_INVALID_SERVICE (ED_GN | 0x29) /* <- NCX */ + +#define ED_READ_FILE_ALREADY_OPENED (ED_GN | 0x2a) /* <- Decalage + * pour RCX + * (old 0x28) + * */ +#define ED_READ_FILE_INVALID_COMMAND (ED_GN | 0x2b) /* ~ */ +#define ED_READ_FILE_INVALID_PARAMETER (ED_GN | 0x2c) /* ~ */ +#define ED_READ_FILE_ALREADY_CLOSED (ED_GN | 0x2d) /* ~ */ +#define ED_READ_FILE_NO_INFORMATION (ED_GN | 0x2e) /* ~ */ +#define ED_READ_FILE_INVALID_HANDLE (ED_GN | 0x2f) /* ~ */ +#define ED_READ_FILE_END_OF_FILE (ED_GN | 0x30) /* ~ */ +#define ED_READ_FILE_ERROR (ED_GN | 0x31) /* ~ */ + +#define ED_DSP_CRASHED_EXC_DSPSTACK_OVERFLOW (ED_GN | 0x32) /* <- Decalage pour + * PCX (old 0x14) */ +#define ED_DSP_CRASHED_EXC_SYSSTACK_OVERFLOW (ED_GN | 0x33) /* ~ */ +#define ED_DSP_CRASHED_EXC_ILLEGAL (ED_GN | 0x34) /* ~ */ +#define ED_DSP_CRASHED_EXC_TIMER_REENTRY (ED_GN | 0x35) /* ~ */ +#define ED_DSP_CRASHED_EXC_FATAL_ERROR (ED_GN | 0x36) /* ~ */ + +#define ED_FLASH_PCCARD_NOT_PRESENT (ED_GN | 0x37) + +#define ED_NO_CURRENT_CLOCK (ED_GN | 0x38) + +/* Complete DRV error code for real time class */ +#define ED_RT (ERROR_VALUE | E_SOURCE_DRV | E_CLASS_REAL_TIME_ERROR) +#define ED_DSP_TIMED_OUT (ED_RT | 0x01) +#define ED_DSP_CHK_TIMED_OUT (ED_RT | 0x02) +#define ED_STREAM_OVERRUN (ED_RT | 0x03) +#define ED_DSP_BUSY (ED_RT | 0x04) +#define ED_DSP_SEMAPHORE_TIME_OUT (ED_RT | 0x05) +#define ED_BOARD_TIME_OUT (ED_RT | 0x06) +#define ED_XILINX_ERROR (ED_RT | 0x07) +#define ED_COBRANET_ITF_NOT_RESPONDING (ED_RT | 0x08) + +/* Complete BOARD error code for the invaid standard object class */ +#define EB_ISO (ERROR_VALUE | E_SOURCE_BOARD | \ + E_CLASS_INVALID_STD_OBJECT) +#define EB_INVALID_EFFECT (EB_ISO | 0x00) +#define EB_INVALID_PIPE (EB_ISO | 0x40) +#define EB_INVALID_STREAM (EB_ISO | 0x80) +#define EB_INVALID_AUDIO (EB_ISO | 0xC0) + +/* Complete BOARD error code for impossible resource allocation class */ +#define EB_RI (ERROR_VALUE | E_SOURCE_BOARD | E_CLASS_RSRC_IMPOSSIBLE) +#define EB_ALLOCATE_ALL_STREAM_TRANSFERT_BUFFERS_IMPOSSIBLE (EB_RI | 0x01) +#define EB_ALLOCATE_PIPE_SAMPLE_BUFFER_IMPOSSIBLE (EB_RI | 0x02) + +#define EB_ALLOCATE_MEM_STREAM_IMPOSSIBLE \ + EB_ALLOCATE_ALL_STREAM_TRANSFERT_BUFFERS_IMPOSSIBLE +#define EB_ALLOCATE_MEM_PIPE_IMPOSSIBLE \ + EB_ALLOCATE_PIPE_SAMPLE_BUFFER_IMPOSSIBLE + +#define EB_ALLOCATE_DIFFERED_CMD_IMPOSSIBLE (EB_RI | 0x03) +#define EB_TOO_MANY_DIFFERED_CMD (EB_RI | 0x04) +#define EB_RBUFFERS_TABLE_OVERFLOW (EB_RI | 0x05) +#define EB_ALLOCATE_EFFECTS_IMPOSSIBLE (EB_RI | 0x08) +#define EB_ALLOCATE_EFFECT_POS_IMPOSSIBLE (EB_RI | 0x09) +#define EB_RBUFFER_NOT_AVAILABLE (EB_RI | 0x0A) +#define EB_ALLOCATE_CONTEXT_LIII_IMPOSSIBLE (EB_RI | 0x0B) +#define EB_STATUS_DIALOG_IMPOSSIBLE (EB_RI | 0x1D) +#define EB_CONTROL_CMD_IMPOSSIBLE (EB_RI | 0x1E) +#define EB_STATUS_SEND_IMPOSSIBLE (EB_RI | 0x1F) +#define EB_ALLOCATE_PIPE_IMPOSSIBLE (EB_RI | 0x40) +#define EB_ALLOCATE_STREAM_IMPOSSIBLE (EB_RI | 0x80) +#define EB_ALLOCATE_AUDIO_IMPOSSIBLE (EB_RI | 0xC0) + +/* Complete BOARD error code for wrong call context class */ +#define EB_WCC (ERROR_VALUE | E_SOURCE_BOARD | E_CLASS_WRONG_CONTEXT) +#define EB_CMD_REFUSED (EB_WCC | 0x00) +#define EB_START_STREAM_REFUSED (EB_WCC | 0xFC) +#define EB_SPC_REFUSED (EB_WCC | 0xFD) +#define EB_CSN_REFUSED (EB_WCC | 0xFE) +#define EB_CSE_REFUSED (EB_WCC | 0xFF) + + + + +#endif /* LX_DEFS_H */ -- cgit v1.2.3