From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- sound/pci/pcxhr/pcxhr_hwdep.c | 412 ++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 412 insertions(+) create mode 100644 sound/pci/pcxhr/pcxhr_hwdep.c (limited to 'sound/pci/pcxhr/pcxhr_hwdep.c') diff --git a/sound/pci/pcxhr/pcxhr_hwdep.c b/sound/pci/pcxhr/pcxhr_hwdep.c new file mode 100644 index 000000000..249805065 --- /dev/null +++ b/sound/pci/pcxhr/pcxhr_hwdep.c @@ -0,0 +1,412 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * Driver for Digigram pcxhr compatible soundcards + * + * hwdep device manager + * + * Copyright (c) 2004 by Digigram + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include "pcxhr.h" +#include "pcxhr_mixer.h" +#include "pcxhr_hwdep.h" +#include "pcxhr_core.h" +#include "pcxhr_mix22.h" + + +static int pcxhr_sub_init(struct pcxhr_mgr *mgr); +/* + * get basic information and init pcxhr card + */ +static int pcxhr_init_board(struct pcxhr_mgr *mgr) +{ + int err; + struct pcxhr_rmh rmh; + int card_streams; + + /* calc the number of all streams used */ + if (mgr->mono_capture) + card_streams = mgr->capture_chips * 2; + else + card_streams = mgr->capture_chips; + card_streams += mgr->playback_chips * PCXHR_PLAYBACK_STREAMS; + + /* enable interrupts */ + pcxhr_enable_dsp(mgr); + + pcxhr_init_rmh(&rmh, CMD_SUPPORTED); + err = pcxhr_send_msg(mgr, &rmh); + if (err) + return err; + /* test 4, 8 or 12 phys out */ + if ((rmh.stat[0] & MASK_FIRST_FIELD) < mgr->playback_chips * 2) + return -EINVAL; + /* test 4, 8 or 2 phys in */ + if (((rmh.stat[0] >> (2 * FIELD_SIZE)) & MASK_FIRST_FIELD) < + mgr->capture_chips * 2) + return -EINVAL; + /* test max nb substream per board */ + if ((rmh.stat[1] & 0x5F) < card_streams) + return -EINVAL; + /* test max nb substream per pipe */ + if (((rmh.stat[1] >> 7) & 0x5F) < PCXHR_PLAYBACK_STREAMS) + return -EINVAL; + dev_dbg(&mgr->pci->dev, + "supported formats : playback=%x capture=%x\n", + rmh.stat[2], rmh.stat[3]); + + pcxhr_init_rmh(&rmh, CMD_VERSION); + /* firmware num for DSP */ + rmh.cmd[0] |= mgr->firmware_num; + /* transfer granularity in samples (should be multiple of 48) */ + rmh.cmd[1] = (1<<23) + mgr->granularity; + rmh.cmd_len = 2; + err = pcxhr_send_msg(mgr, &rmh); + if (err) + return err; + dev_dbg(&mgr->pci->dev, + "PCXHR DSP version is %d.%d.%d\n", (rmh.stat[0]>>16)&0xff, + (rmh.stat[0]>>8)&0xff, rmh.stat[0]&0xff); + mgr->dsp_version = rmh.stat[0]; + + if (mgr->is_hr_stereo) + err = hr222_sub_init(mgr); + else + err = pcxhr_sub_init(mgr); + return err; +} + +static int pcxhr_sub_init(struct pcxhr_mgr *mgr) +{ + int err; + struct pcxhr_rmh rmh; + + /* get options */ + pcxhr_init_rmh(&rmh, CMD_ACCESS_IO_READ); + rmh.cmd[0] |= IO_NUM_REG_STATUS; + rmh.cmd[1] = REG_STATUS_OPTIONS; + rmh.cmd_len = 2; + err = pcxhr_send_msg(mgr, &rmh); + if (err) + return err; + + if ((rmh.stat[1] & REG_STATUS_OPT_DAUGHTER_MASK) == + REG_STATUS_OPT_ANALOG_BOARD) + mgr->board_has_analog = 1; /* analog addon board found */ + + /* unmute inputs */ + err = pcxhr_write_io_num_reg_cont(mgr, REG_CONT_UNMUTE_INPUTS, + REG_CONT_UNMUTE_INPUTS, NULL); + if (err) + return err; + /* unmute outputs (a write to IO_NUM_REG_MUTE_OUT mutes!) */ + pcxhr_init_rmh(&rmh, CMD_ACCESS_IO_READ); + rmh.cmd[0] |= IO_NUM_REG_MUTE_OUT; + if (DSP_EXT_CMD_SET(mgr)) { + rmh.cmd[1] = 1; /* unmute digital plugs */ + rmh.cmd_len = 2; + } + err = pcxhr_send_msg(mgr, &rmh); + return err; +} + +void pcxhr_reset_board(struct pcxhr_mgr *mgr) +{ + struct pcxhr_rmh rmh; + + if (mgr->dsp_loaded & (1 << PCXHR_FIRMWARE_DSP_MAIN_INDEX)) { + /* mute outputs */ + if (!mgr->is_hr_stereo) { + /* a read to IO_NUM_REG_MUTE_OUT register unmutes! */ + pcxhr_init_rmh(&rmh, CMD_ACCESS_IO_WRITE); + rmh.cmd[0] |= IO_NUM_REG_MUTE_OUT; + pcxhr_send_msg(mgr, &rmh); + /* mute inputs */ + pcxhr_write_io_num_reg_cont(mgr, REG_CONT_UNMUTE_INPUTS, + 0, NULL); + } + /* stereo cards mute with reset of dsp */ + } + /* reset pcxhr dsp */ + if (mgr->dsp_loaded & (1 << PCXHR_FIRMWARE_DSP_EPRM_INDEX)) + pcxhr_reset_dsp(mgr); + /* reset second xilinx */ + if (mgr->dsp_loaded & (1 << PCXHR_FIRMWARE_XLX_COM_INDEX)) { + pcxhr_reset_xilinx_com(mgr); + mgr->dsp_loaded = 1; + } + return; +} + + +/* + * allocate a playback/capture pipe (pcmp0/pcmc0) + */ +static int pcxhr_dsp_allocate_pipe(struct pcxhr_mgr *mgr, + struct pcxhr_pipe *pipe, + int is_capture, int pin) +{ + int stream_count, audio_count; + int err; + struct pcxhr_rmh rmh; + + if (is_capture) { + stream_count = 1; + if (mgr->mono_capture) + audio_count = 1; + else + audio_count = 2; + } else { + stream_count = PCXHR_PLAYBACK_STREAMS; + audio_count = 2; /* always stereo */ + } + dev_dbg(&mgr->pci->dev, "snd_add_ref_pipe pin(%d) pcm%c0\n", + pin, is_capture ? 'c' : 'p'); + pipe->is_capture = is_capture; + pipe->first_audio = pin; + /* define pipe (P_PCM_ONLY_MASK (0x020000) is not necessary) */ + pcxhr_init_rmh(&rmh, CMD_RES_PIPE); + pcxhr_set_pipe_cmd_params(&rmh, is_capture, pin, + audio_count, stream_count); + rmh.cmd[1] |= 0x020000; /* add P_PCM_ONLY_MASK */ + if (DSP_EXT_CMD_SET(mgr)) { + /* add channel mask to command */ + rmh.cmd[rmh.cmd_len++] = (audio_count == 1) ? 0x01 : 0x03; + } + err = pcxhr_send_msg(mgr, &rmh); + if (err < 0) { + dev_err(&mgr->pci->dev, "error pipe allocation " + "(CMD_RES_PIPE) err=%x!\n", err); + return err; + } + pipe->status = PCXHR_PIPE_DEFINED; + + return 0; +} + +/* + * free playback/capture pipe (pcmp0/pcmc0) + */ +#if 0 +static int pcxhr_dsp_free_pipe( struct pcxhr_mgr *mgr, struct pcxhr_pipe *pipe) +{ + struct pcxhr_rmh rmh; + int capture_mask = 0; + int playback_mask = 0; + int err = 0; + + if (pipe->is_capture) + capture_mask = (1 << pipe->first_audio); + else + playback_mask = (1 << pipe->first_audio); + + /* stop one pipe */ + err = pcxhr_set_pipe_state(mgr, playback_mask, capture_mask, 0); + if (err < 0) + dev_err(&mgr->pci->dev, "error stopping pipe!\n"); + /* release the pipe */ + pcxhr_init_rmh(&rmh, CMD_FREE_PIPE); + pcxhr_set_pipe_cmd_params(&rmh, pipe->is_capture, pipe->first_audio, + 0, 0); + err = pcxhr_send_msg(mgr, &rmh); + if (err < 0) + dev_err(&mgr->pci->dev, "error pipe release " + "(CMD_FREE_PIPE) err(%x)\n", err); + pipe->status = PCXHR_PIPE_UNDEFINED; + return err; +} +#endif + + +static int pcxhr_config_pipes(struct pcxhr_mgr *mgr) +{ + int err, i, j; + struct snd_pcxhr *chip; + struct pcxhr_pipe *pipe; + + /* allocate the pipes on the dsp */ + for (i = 0; i < mgr->num_cards; i++) { + chip = mgr->chip[i]; + if (chip->nb_streams_play) { + pipe = &chip->playback_pipe; + err = pcxhr_dsp_allocate_pipe( mgr, pipe, 0, i*2); + if (err) + return err; + for(j = 0; j < chip->nb_streams_play; j++) + chip->playback_stream[j].pipe = pipe; + } + for (j = 0; j < chip->nb_streams_capt; j++) { + pipe = &chip->capture_pipe[j]; + err = pcxhr_dsp_allocate_pipe(mgr, pipe, 1, i*2 + j); + if (err) + return err; + chip->capture_stream[j].pipe = pipe; + } + } + return 0; +} + +static int pcxhr_start_pipes(struct pcxhr_mgr *mgr) +{ + int i, j; + struct snd_pcxhr *chip; + int playback_mask = 0; + int capture_mask = 0; + + /* start all the pipes on the dsp */ + for (i = 0; i < mgr->num_cards; i++) { + chip = mgr->chip[i]; + if (chip->nb_streams_play) + playback_mask |= 1 << chip->playback_pipe.first_audio; + for (j = 0; j < chip->nb_streams_capt; j++) + capture_mask |= 1 << chip->capture_pipe[j].first_audio; + } + return pcxhr_set_pipe_state(mgr, playback_mask, capture_mask, 1); +} + + +static int pcxhr_dsp_load(struct pcxhr_mgr *mgr, int index, + const struct firmware *dsp) +{ + int err, card_index; + + dev_dbg(&mgr->pci->dev, + "loading dsp [%d] size = %zd\n", index, dsp->size); + + switch (index) { + case PCXHR_FIRMWARE_XLX_INT_INDEX: + pcxhr_reset_xilinx_com(mgr); + return pcxhr_load_xilinx_binary(mgr, dsp, 0); + + case PCXHR_FIRMWARE_XLX_COM_INDEX: + pcxhr_reset_xilinx_com(mgr); + return pcxhr_load_xilinx_binary(mgr, dsp, 1); + + case PCXHR_FIRMWARE_DSP_EPRM_INDEX: + pcxhr_reset_dsp(mgr); + return pcxhr_load_eeprom_binary(mgr, dsp); + + case PCXHR_FIRMWARE_DSP_BOOT_INDEX: + return pcxhr_load_boot_binary(mgr, dsp); + + case PCXHR_FIRMWARE_DSP_MAIN_INDEX: + err = pcxhr_load_dsp_binary(mgr, dsp); + if (err) + return err; + break; /* continue with first init */ + default: + dev_err(&mgr->pci->dev, "wrong file index\n"); + return -EFAULT; + } /* end of switch file index*/ + + /* first communication with embedded */ + err = pcxhr_init_board(mgr); + if (err < 0) { + dev_err(&mgr->pci->dev, "pcxhr could not be set up\n"); + return err; + } + err = pcxhr_config_pipes(mgr); + if (err < 0) { + dev_err(&mgr->pci->dev, "pcxhr pipes could not be set up\n"); + return err; + } + /* create devices and mixer in accordance with HW options*/ + for (card_index = 0; card_index < mgr->num_cards; card_index++) { + struct snd_pcxhr *chip = mgr->chip[card_index]; + + err = pcxhr_create_pcm(chip); + if (err < 0) + return err; + + if (card_index == 0) { + err = pcxhr_create_mixer(chip->mgr); + if (err < 0) + return err; + } + err = snd_card_register(chip->card); + if (err < 0) + return err; + } + err = pcxhr_start_pipes(mgr); + if (err < 0) { + dev_err(&mgr->pci->dev, "pcxhr pipes could not be started\n"); + return err; + } + dev_dbg(&mgr->pci->dev, + "pcxhr firmware downloaded and successfully set up\n"); + + return 0; +} + +/* + * fw loader entry + */ +int pcxhr_setup_firmware(struct pcxhr_mgr *mgr) +{ + static const char * const fw_files[][5] = { + [0] = { "xlxint.dat", "xlxc882hr.dat", + "dspe882.e56", "dspb882hr.b56", "dspd882.d56" }, + [1] = { "xlxint.dat", "xlxc882e.dat", + "dspe882.e56", "dspb882e.b56", "dspd882.d56" }, + [2] = { "xlxint.dat", "xlxc1222hr.dat", + "dspe882.e56", "dspb1222hr.b56", "dspd1222.d56" }, + [3] = { "xlxint.dat", "xlxc1222e.dat", + "dspe882.e56", "dspb1222e.b56", "dspd1222.d56" }, + [4] = { NULL, "xlxc222.dat", + "dspe924.e56", "dspb924.b56", "dspd222.d56" }, + [5] = { NULL, "xlxc924.dat", + "dspe924.e56", "dspb924.b56", "dspd222.d56" }, + }; + char path[32]; + + const struct firmware *fw_entry; + int i, err; + int fw_set = mgr->fw_file_set; + + for (i = 0; i < 5; i++) { + if (!fw_files[fw_set][i]) + continue; + sprintf(path, "pcxhr/%s", fw_files[fw_set][i]); + if (request_firmware(&fw_entry, path, &mgr->pci->dev)) { + dev_err(&mgr->pci->dev, + "pcxhr: can't load firmware %s\n", + path); + return -ENOENT; + } + /* fake hwdep dsp record */ + err = pcxhr_dsp_load(mgr, i, fw_entry); + release_firmware(fw_entry); + if (err < 0) + return err; + mgr->dsp_loaded |= 1 << i; + } + return 0; +} + +MODULE_FIRMWARE("pcxhr/xlxint.dat"); +MODULE_FIRMWARE("pcxhr/xlxc882hr.dat"); +MODULE_FIRMWARE("pcxhr/xlxc882e.dat"); +MODULE_FIRMWARE("pcxhr/dspe882.e56"); +MODULE_FIRMWARE("pcxhr/dspb882hr.b56"); +MODULE_FIRMWARE("pcxhr/dspb882e.b56"); +MODULE_FIRMWARE("pcxhr/dspd882.d56"); + +MODULE_FIRMWARE("pcxhr/xlxc1222hr.dat"); +MODULE_FIRMWARE("pcxhr/xlxc1222e.dat"); +MODULE_FIRMWARE("pcxhr/dspb1222hr.b56"); +MODULE_FIRMWARE("pcxhr/dspb1222e.b56"); +MODULE_FIRMWARE("pcxhr/dspd1222.d56"); + +MODULE_FIRMWARE("pcxhr/xlxc222.dat"); +MODULE_FIRMWARE("pcxhr/xlxc924.dat"); +MODULE_FIRMWARE("pcxhr/dspe924.e56"); +MODULE_FIRMWARE("pcxhr/dspb924.b56"); +MODULE_FIRMWARE("pcxhr/dspd222.d56"); -- cgit v1.2.3