From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- sound/soc/amd/acp.h | 223 ++++++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 223 insertions(+) create mode 100644 sound/soc/amd/acp.h (limited to 'sound/soc/amd/acp.h') diff --git a/sound/soc/amd/acp.h b/sound/soc/amd/acp.h new file mode 100644 index 000000000..b29bef90f --- /dev/null +++ b/sound/soc/amd/acp.h @@ -0,0 +1,223 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +#ifndef __ACP_HW_H +#define __ACP_HW_H + +#include "include/acp_2_2_d.h" +#include "include/acp_2_2_sh_mask.h" + +#define ACP_PAGE_SIZE_4K_ENABLE 0x02 + +#define ACP_PLAYBACK_PTE_OFFSET 10 +#define ACP_CAPTURE_PTE_OFFSET 0 + +/* Playback and Capture Offset for Stoney */ +#define ACP_ST_PLAYBACK_PTE_OFFSET 0x04 +#define ACP_ST_CAPTURE_PTE_OFFSET 0x00 +#define ACP_ST_BT_PLAYBACK_PTE_OFFSET 0x08 +#define ACP_ST_BT_CAPTURE_PTE_OFFSET 0x0c + +#define ACP_GARLIC_CNTL_DEFAULT 0x00000FB4 +#define ACP_ONION_CNTL_DEFAULT 0x00000FB4 + +#define ACP_PHYSICAL_BASE 0x14000 + +/* + * In case of I2S SP controller instance, Stoney uses SRAM bank 1 for + * playback and SRAM Bank 2 for capture where as in case of BT I2S + * Instance, Stoney uses SRAM Bank 3 for playback & SRAM Bank 4 will + * be used for capture. Carrizo uses I2S SP controller instance. SRAM Banks + * 1, 2, 3, 4 will be used for playback & SRAM Banks 5, 6, 7, 8 will be used + * for capture scenario. + */ +#define ACP_SRAM_BANK_1_ADDRESS 0x4002000 +#define ACP_SRAM_BANK_2_ADDRESS 0x4004000 +#define ACP_SRAM_BANK_3_ADDRESS 0x4006000 +#define ACP_SRAM_BANK_4_ADDRESS 0x4008000 +#define ACP_SRAM_BANK_5_ADDRESS 0x400A000 + +#define ACP_DMA_RESET_TIME 10000 +#define ACP_CLOCK_EN_TIME_OUT_VALUE 0x000000FF +#define ACP_SOFT_RESET_DONE_TIME_OUT_VALUE 0x000000FF +#define ACP_DMA_COMPLETE_TIME_OUT_VALUE 0x000000FF + +#define ACP_SRAM_BASE_ADDRESS 0x4000000 +#define ACP_DAGB_GRP_SRAM_BASE_ADDRESS 0x4001000 +#define ACP_DAGB_GRP_SRBM_SRAM_BASE_OFFSET 0x1000 +#define ACP_INTERNAL_APERTURE_WINDOW_0_ADDRESS 0x00000000 +#define ACP_INTERNAL_APERTURE_WINDOW_4_ADDRESS 0x01800000 + +#define TO_ACP_I2S_1 0x2 +#define TO_ACP_I2S_2 0x4 +#define TO_BLUETOOTH 0x3 +#define FROM_ACP_I2S_1 0xa +#define FROM_ACP_I2S_2 0xb +#define FROM_BLUETOOTH 0xb + +#define I2S_SP_INSTANCE 0x01 +#define I2S_BT_INSTANCE 0x02 +#define I2S_MICSP_INSTANCE 0x03 +#define CAP_CHANNEL0 0x00 +#define CAP_CHANNEL1 0x01 + +#define ACP_TILE_ON_MASK 0x03 +#define ACP_TILE_OFF_MASK 0x02 +#define ACP_TILE_ON_RETAIN_REG_MASK 0x1f +#define ACP_TILE_OFF_RETAIN_REG_MASK 0x20 + +#define ACP_TILE_P1_MASK 0x3e +#define ACP_TILE_P2_MASK 0x3d +#define ACP_TILE_DSP0_MASK 0x3b +#define ACP_TILE_DSP1_MASK 0x37 + +#define ACP_TILE_DSP2_MASK 0x2f +/* Playback DMA channels */ +#define SYSRAM_TO_ACP_CH_NUM 12 +#define ACP_TO_I2S_DMA_CH_NUM 13 + +/* Capture DMA channels */ +#define I2S_TO_ACP_DMA_CH_NUM 14 +#define ACP_TO_SYSRAM_CH_NUM 15 + +/* Playback DMA Channels for I2S BT instance */ +#define SYSRAM_TO_ACP_BT_INSTANCE_CH_NUM 8 +#define ACP_TO_I2S_DMA_BT_INSTANCE_CH_NUM 9 + +/* Capture DMA Channels for I2S BT Instance */ +#define I2S_TO_ACP_DMA_BT_INSTANCE_CH_NUM 10 +#define ACP_TO_SYSRAM_BT_INSTANCE_CH_NUM 11 + +/* Playback DMA channels for I2S MICSP instance */ +#define SYSRAM_TO_ACP_MICSP_INSTANCE_CH_NUM 4 +#define ACP_TO_I2S_DMA_MICSP_INSTANCE_CH_NUM 5 + +#define NUM_DSCRS_PER_CHANNEL 2 + +#define PLAYBACK_START_DMA_DESCR_CH12 0 +#define PLAYBACK_END_DMA_DESCR_CH12 1 +#define PLAYBACK_START_DMA_DESCR_CH13 2 +#define PLAYBACK_END_DMA_DESCR_CH13 3 + +#define CAPTURE_START_DMA_DESCR_CH14 4 +#define CAPTURE_END_DMA_DESCR_CH14 5 +#define CAPTURE_START_DMA_DESCR_CH15 6 +#define CAPTURE_END_DMA_DESCR_CH15 7 + +/* I2S BT Instance DMA Descriptors */ +#define PLAYBACK_START_DMA_DESCR_CH8 8 +#define PLAYBACK_END_DMA_DESCR_CH8 9 +#define PLAYBACK_START_DMA_DESCR_CH9 10 +#define PLAYBACK_END_DMA_DESCR_CH9 11 + +#define CAPTURE_START_DMA_DESCR_CH10 12 +#define CAPTURE_END_DMA_DESCR_CH10 13 +#define CAPTURE_START_DMA_DESCR_CH11 14 +#define CAPTURE_END_DMA_DESCR_CH11 15 + +/* I2S MICSP Instance DMA Descriptors */ +#define PLAYBACK_START_DMA_DESCR_CH4 0 +#define PLAYBACK_END_DMA_DESCR_CH4 1 +#define PLAYBACK_START_DMA_DESCR_CH5 2 +#define PLAYBACK_END_DMA_DESCR_CH5 3 + +#define mmACP_I2S_16BIT_RESOLUTION_EN 0x5209 +#define ACP_I2S_MIC_16BIT_RESOLUTION_EN 0x01 +#define ACP_I2S_MICSP_16BIT_RESOLUTION_EN 0x01 +#define ACP_I2S_SP_16BIT_RESOLUTION_EN 0x02 +#define ACP_I2S_BT_16BIT_RESOLUTION_EN 0x04 +#define ACP_BT_UART_PAD_SELECT_MASK 0x1 + +enum acp_dma_priority_level { + /* 0x0 Specifies the DMA channel is given normal priority */ + ACP_DMA_PRIORITY_LEVEL_NORMAL = 0x0, + /* 0x1 Specifies the DMA channel is given high priority */ + ACP_DMA_PRIORITY_LEVEL_HIGH = 0x1, + ACP_DMA_PRIORITY_LEVEL_FORCESIZE = 0xFF +}; + +struct audio_substream_data { + dma_addr_t dma_addr; + unsigned int order; + u16 num_of_pages; + u16 i2s_instance; + u16 capture_channel; + u16 direction; + u16 ch1; + u16 ch2; + u16 destination; + u16 dma_dscr_idx_1; + u16 dma_dscr_idx_2; + u32 pte_offset; + u32 sram_bank; + u32 byte_cnt_high_reg_offset; + u32 byte_cnt_low_reg_offset; + u32 dma_curr_dscr; + uint64_t size; + u64 bytescount; + void __iomem *acp_mmio; +}; + +struct audio_drv_data { + struct snd_pcm_substream *play_i2ssp_stream; + struct snd_pcm_substream *capture_i2ssp_stream; + struct snd_pcm_substream *play_i2sbt_stream; + struct snd_pcm_substream *capture_i2sbt_stream; + struct snd_pcm_substream *play_i2s_micsp_stream; + void __iomem *acp_mmio; + u32 asic_type; + snd_pcm_sframes_t delay; +}; + +/* + * this structure used for platform data transfer between machine driver + * and dma driver + */ +struct acp_platform_info { + u16 play_i2s_instance; + u16 cap_i2s_instance; + u16 capture_channel; +}; + +union acp_dma_count { + struct { + u32 low; + u32 high; + } bcount; + u64 bytescount; +}; + +enum { + ACP_TILE_P1 = 0, + ACP_TILE_P2, + ACP_TILE_DSP0, + ACP_TILE_DSP1, + ACP_TILE_DSP2, +}; + +enum { + ACP_DMA_ATTR_SHAREDMEM_TO_DAGB_ONION = 0x0, + ACP_DMA_ATTR_SHARED_MEM_TO_DAGB_GARLIC = 0x1, + ACP_DMA_ATTR_DAGB_ONION_TO_SHAREDMEM = 0x8, + ACP_DMA_ATTR_DAGB_GARLIC_TO_SHAREDMEM = 0x9, + ACP_DMA_ATTR_FORCE_SIZE = 0xF +}; + +typedef struct acp_dma_dscr_transfer { + /* Specifies the source memory location for the DMA data transfer. */ + u32 src; + /* + * Specifies the destination memory location to where the data will + * be transferred. + */ + u32 dest; + /* + * Specifies the number of bytes need to be transferred + * from source to destination memory.Transfer direction & IOC enable + */ + u32 xfer_val; + /* Reserved for future use */ + u32 reserved; +} acp_dma_dscr_transfer_t; + +extern bool acp_bt_uart_enable; + +#endif /*__ACP_HW_H */ -- cgit v1.2.3