From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- sound/soc/amd/raven/acp3x.h | 162 ++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 162 insertions(+) create mode 100644 sound/soc/amd/raven/acp3x.h (limited to 'sound/soc/amd/raven/acp3x.h') diff --git a/sound/soc/amd/raven/acp3x.h b/sound/soc/amd/raven/acp3x.h new file mode 100644 index 000000000..7702f628e --- /dev/null +++ b/sound/soc/amd/raven/acp3x.h @@ -0,0 +1,162 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ +/* + * AMD ALSA SoC PCM Driver + * + * Copyright 2016 Advanced Micro Devices, Inc. + */ + +#include "chip_offset_byte.h" +#include +#define I2S_SP_INSTANCE 0x01 +#define I2S_BT_INSTANCE 0x02 + +#define TDM_ENABLE 1 +#define TDM_DISABLE 0 + +#define ACP3x_DEVS 4 +#define ACP3x_PHY_BASE_ADDRESS 0x1240000 +#define ACP3x_I2S_MODE 0 +#define ACP3x_REG_START 0x1240000 +#define ACP3x_REG_END 0x1250200 +#define ACP3x_I2STDM_REG_START 0x1242400 +#define ACP3x_I2STDM_REG_END 0x1242410 +#define ACP3x_BT_TDM_REG_START 0x1242800 +#define ACP3x_BT_TDM_REG_END 0x1242810 +#define I2S_MODE 0x04 +#define I2S_RX_THRESHOLD 27 +#define I2S_TX_THRESHOLD 28 +#define BT_TX_THRESHOLD 26 +#define BT_RX_THRESHOLD 25 +#define ACP_ERR_INTR_MASK 29 +#define ACP3x_POWER_ON 0x00 +#define ACP3x_POWER_ON_IN_PROGRESS 0x01 +#define ACP3x_POWER_OFF 0x02 +#define ACP3x_POWER_OFF_IN_PROGRESS 0x03 +#define ACP3x_SOFT_RESET__SoftResetAudDone_MASK 0x00010001 + +#define ACP_SRAM_PTE_OFFSET 0x02050000 +#define ACP_SRAM_SP_PB_PTE_OFFSET 0x0 +#define ACP_SRAM_SP_CP_PTE_OFFSET 0x100 +#define ACP_SRAM_BT_PB_PTE_OFFSET 0x200 +#define ACP_SRAM_BT_CP_PTE_OFFSET 0x300 +#define PAGE_SIZE_4K_ENABLE 0x2 +#define I2S_SP_TX_MEM_WINDOW_START 0x4000000 +#define I2S_SP_RX_MEM_WINDOW_START 0x4020000 +#define I2S_BT_TX_MEM_WINDOW_START 0x4040000 +#define I2S_BT_RX_MEM_WINDOW_START 0x4060000 + +#define SP_PB_FIFO_ADDR_OFFSET 0x500 +#define SP_CAPT_FIFO_ADDR_OFFSET 0x700 +#define BT_PB_FIFO_ADDR_OFFSET 0x900 +#define BT_CAPT_FIFO_ADDR_OFFSET 0xB00 +#define PLAYBACK_MIN_NUM_PERIODS 2 +#define PLAYBACK_MAX_NUM_PERIODS 8 +#define PLAYBACK_MAX_PERIOD_SIZE 8192 +#define PLAYBACK_MIN_PERIOD_SIZE 1024 +#define CAPTURE_MIN_NUM_PERIODS 2 +#define CAPTURE_MAX_NUM_PERIODS 8 +#define CAPTURE_MAX_PERIOD_SIZE 8192 +#define CAPTURE_MIN_PERIOD_SIZE 1024 + +#define MAX_BUFFER (PLAYBACK_MAX_PERIOD_SIZE * PLAYBACK_MAX_NUM_PERIODS) +#define MIN_BUFFER MAX_BUFFER +#define FIFO_SIZE 0x100 +#define DMA_SIZE 0x40 +#define FRM_LEN 0x100 + +#define SLOT_WIDTH_8 0x08 +#define SLOT_WIDTH_16 0x10 +#define SLOT_WIDTH_24 0x18 +#define SLOT_WIDTH_32 0x20 +#define ACP_PGFSM_CNTL_POWER_ON_MASK 0x01 +#define ACP_PGFSM_CNTL_POWER_OFF_MASK 0x00 +#define ACP_PGFSM_STATUS_MASK 0x03 +#define ACP_POWERED_ON 0x00 +#define ACP_POWER_ON_IN_PROGRESS 0x01 +#define ACP_POWERED_OFF 0x02 +#define ACP_POWER_OFF_IN_PROGRESS 0x03 + +#define ACP3x_ITER_IRER_SAMP_LEN_MASK 0x38 +#define ACP_EXT_INTR_STAT_CLEAR_MASK 0xFFFFFFFF + +struct acp3x_platform_info { + u16 play_i2s_instance; + u16 cap_i2s_instance; + u16 capture_channel; +}; + +struct i2s_dev_data { + bool tdm_mode; + int i2s_irq; + u16 i2s_instance; + u32 tdm_fmt; + u32 substream_type; + void __iomem *acp3x_base; + struct snd_pcm_substream *play_stream; + struct snd_pcm_substream *capture_stream; + struct snd_pcm_substream *i2ssp_play_stream; + struct snd_pcm_substream *i2ssp_capture_stream; +}; + +struct i2s_stream_instance { + u16 num_pages; + u16 i2s_instance; + u16 capture_channel; + u16 direction; + u16 channels; + u32 xfer_resolution; + u32 val; + dma_addr_t dma_addr; + u64 bytescount; + void __iomem *acp3x_base; +}; + +static inline u32 rv_readl(void __iomem *base_addr) +{ + return readl(base_addr - ACP3x_PHY_BASE_ADDRESS); +} + +static inline void rv_writel(u32 val, void __iomem *base_addr) +{ + writel(val, base_addr - ACP3x_PHY_BASE_ADDRESS); +} + +static inline u64 acp_get_byte_count(struct i2s_stream_instance *rtd, + int direction) +{ + u64 byte_count; + + if (direction == SNDRV_PCM_STREAM_PLAYBACK) { + switch (rtd->i2s_instance) { + case I2S_BT_INSTANCE: + byte_count = rv_readl(rtd->acp3x_base + + mmACP_BT_TX_LINEARPOSITIONCNTR_HIGH); + byte_count |= rv_readl(rtd->acp3x_base + + mmACP_BT_TX_LINEARPOSITIONCNTR_LOW); + break; + case I2S_SP_INSTANCE: + default: + byte_count = rv_readl(rtd->acp3x_base + + mmACP_I2S_TX_LINEARPOSITIONCNTR_HIGH); + byte_count |= rv_readl(rtd->acp3x_base + + mmACP_I2S_TX_LINEARPOSITIONCNTR_LOW); + } + + } else { + switch (rtd->i2s_instance) { + case I2S_BT_INSTANCE: + byte_count = rv_readl(rtd->acp3x_base + + mmACP_BT_RX_LINEARPOSITIONCNTR_HIGH); + byte_count |= rv_readl(rtd->acp3x_base + + mmACP_BT_RX_LINEARPOSITIONCNTR_LOW); + break; + case I2S_SP_INSTANCE: + default: + byte_count = rv_readl(rtd->acp3x_base + + mmACP_I2S_RX_LINEARPOSITIONCNTR_HIGH); + byte_count |= rv_readl(rtd->acp3x_base + + mmACP_I2S_RX_LINEARPOSITIONCNTR_LOW); + } + } + return byte_count; +} -- cgit v1.2.3