From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- sound/soc/codecs/bd28623.c | 241 +++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 241 insertions(+) create mode 100644 sound/soc/codecs/bd28623.c (limited to 'sound/soc/codecs/bd28623.c') diff --git a/sound/soc/codecs/bd28623.c b/sound/soc/codecs/bd28623.c new file mode 100644 index 000000000..82a94211d --- /dev/null +++ b/sound/soc/codecs/bd28623.c @@ -0,0 +1,241 @@ +// SPDX-License-Identifier: GPL-2.0 +// +// ROHM BD28623MUV class D speaker amplifier codec driver. +// +// Copyright (c) 2018 Socionext Inc. + +#include +#include +#include +#include +#include +#include +#include + +#define BD28623_NUM_SUPPLIES 3 + +static const char *const bd28623_supply_names[BD28623_NUM_SUPPLIES] = { + "VCCA", + "VCCP1", + "VCCP2", +}; + +struct bd28623_priv { + struct device *dev; + struct regulator_bulk_data supplies[BD28623_NUM_SUPPLIES]; + struct gpio_desc *reset_gpio; + struct gpio_desc *mute_gpio; + + int switch_spk; +}; + +static const struct snd_soc_dapm_widget bd28623_widgets[] = { + SND_SOC_DAPM_DAC("DAC", "Playback", SND_SOC_NOPM, 0, 0), + SND_SOC_DAPM_OUTPUT("OUT1P"), + SND_SOC_DAPM_OUTPUT("OUT1N"), + SND_SOC_DAPM_OUTPUT("OUT2P"), + SND_SOC_DAPM_OUTPUT("OUT2N"), +}; + +static const struct snd_soc_dapm_route bd28623_routes[] = { + { "OUT1P", NULL, "DAC" }, + { "OUT1N", NULL, "DAC" }, + { "OUT2P", NULL, "DAC" }, + { "OUT2N", NULL, "DAC" }, +}; + +static int bd28623_power_on(struct bd28623_priv *bd) +{ + int ret; + + ret = regulator_bulk_enable(ARRAY_SIZE(bd->supplies), bd->supplies); + if (ret) { + dev_err(bd->dev, "Failed to enable supplies: %d\n", ret); + return ret; + } + + gpiod_set_value_cansleep(bd->reset_gpio, 0); + usleep_range(300000, 400000); + + return 0; +} + +static void bd28623_power_off(struct bd28623_priv *bd) +{ + gpiod_set_value_cansleep(bd->reset_gpio, 1); + + regulator_bulk_disable(ARRAY_SIZE(bd->supplies), bd->supplies); +} + +static int bd28623_get_switch_spk(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + struct snd_soc_component *component = + snd_soc_kcontrol_component(kcontrol); + struct bd28623_priv *bd = snd_soc_component_get_drvdata(component); + + ucontrol->value.integer.value[0] = bd->switch_spk; + + return 0; +} + +static int bd28623_set_switch_spk(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + struct snd_soc_component *component = + snd_soc_kcontrol_component(kcontrol); + struct bd28623_priv *bd = snd_soc_component_get_drvdata(component); + + if (bd->switch_spk == ucontrol->value.integer.value[0]) + return 0; + + bd->switch_spk = ucontrol->value.integer.value[0]; + + gpiod_set_value_cansleep(bd->mute_gpio, bd->switch_spk ? 0 : 1); + + return 0; +} + +static const struct snd_kcontrol_new bd28623_controls[] = { + SOC_SINGLE_BOOL_EXT("Speaker Switch", 0, + bd28623_get_switch_spk, bd28623_set_switch_spk), +}; + +static int bd28623_codec_probe(struct snd_soc_component *component) +{ + struct bd28623_priv *bd = snd_soc_component_get_drvdata(component); + int ret; + + bd->switch_spk = 1; + + ret = bd28623_power_on(bd); + if (ret) + return ret; + + gpiod_set_value_cansleep(bd->mute_gpio, bd->switch_spk ? 0 : 1); + + return 0; +} + +static void bd28623_codec_remove(struct snd_soc_component *component) +{ + struct bd28623_priv *bd = snd_soc_component_get_drvdata(component); + + bd28623_power_off(bd); +} + +static int bd28623_codec_suspend(struct snd_soc_component *component) +{ + struct bd28623_priv *bd = snd_soc_component_get_drvdata(component); + + bd28623_power_off(bd); + + return 0; +} + +static int bd28623_codec_resume(struct snd_soc_component *component) +{ + struct bd28623_priv *bd = snd_soc_component_get_drvdata(component); + int ret; + + ret = bd28623_power_on(bd); + if (ret) + return ret; + + gpiod_set_value_cansleep(bd->mute_gpio, bd->switch_spk ? 0 : 1); + + return 0; +} + +static const struct snd_soc_component_driver soc_codec_bd = { + .probe = bd28623_codec_probe, + .remove = bd28623_codec_remove, + .suspend = bd28623_codec_suspend, + .resume = bd28623_codec_resume, + .dapm_widgets = bd28623_widgets, + .num_dapm_widgets = ARRAY_SIZE(bd28623_widgets), + .dapm_routes = bd28623_routes, + .num_dapm_routes = ARRAY_SIZE(bd28623_routes), + .controls = bd28623_controls, + .num_controls = ARRAY_SIZE(bd28623_controls), + .idle_bias_on = 1, + .use_pmdown_time = 1, + .endianness = 1, +}; + +static struct snd_soc_dai_driver soc_dai_bd = { + .name = "bd28623-speaker", + .playback = { + .stream_name = "Playback", + .formats = SNDRV_PCM_FMTBIT_S32_LE | + SNDRV_PCM_FMTBIT_S24_LE | + SNDRV_PCM_FMTBIT_S16_LE, + .rates = SNDRV_PCM_RATE_48000 | + SNDRV_PCM_RATE_44100 | + SNDRV_PCM_RATE_32000, + .channels_min = 2, + .channels_max = 2, + }, +}; + +static int bd28623_probe(struct platform_device *pdev) +{ + struct bd28623_priv *bd; + struct device *dev = &pdev->dev; + int i, ret; + + bd = devm_kzalloc(&pdev->dev, sizeof(struct bd28623_priv), GFP_KERNEL); + if (!bd) + return -ENOMEM; + + for (i = 0; i < ARRAY_SIZE(bd->supplies); i++) + bd->supplies[i].supply = bd28623_supply_names[i]; + + ret = devm_regulator_bulk_get(dev, ARRAY_SIZE(bd->supplies), + bd->supplies); + if (ret) { + dev_err(dev, "Failed to get supplies: %d\n", ret); + return ret; + } + + bd->reset_gpio = devm_gpiod_get_optional(dev, "reset", + GPIOD_OUT_HIGH); + if (IS_ERR(bd->reset_gpio)) { + dev_err(dev, "Failed to request reset_gpio: %ld\n", + PTR_ERR(bd->reset_gpio)); + return PTR_ERR(bd->reset_gpio); + } + + bd->mute_gpio = devm_gpiod_get_optional(dev, "mute", + GPIOD_OUT_HIGH); + if (IS_ERR(bd->mute_gpio)) { + dev_err(dev, "Failed to request mute_gpio: %ld\n", + PTR_ERR(bd->mute_gpio)); + return PTR_ERR(bd->mute_gpio); + } + + platform_set_drvdata(pdev, bd); + bd->dev = dev; + + return devm_snd_soc_register_component(dev, &soc_codec_bd, + &soc_dai_bd, 1); +} + +static const struct of_device_id bd28623_of_match[] __maybe_unused = { + { .compatible = "rohm,bd28623", }, + {} +}; +MODULE_DEVICE_TABLE(of, bd28623_of_match); + +static struct platform_driver bd28623_codec_driver = { + .driver = { + .name = "bd28623", + .of_match_table = of_match_ptr(bd28623_of_match), + }, + .probe = bd28623_probe, +}; +module_platform_driver(bd28623_codec_driver); + +MODULE_AUTHOR("Katsuhiro Suzuki "); +MODULE_DESCRIPTION("ROHM BD28623 speaker amplifier driver"); +MODULE_LICENSE("GPL v2"); -- cgit v1.2.3