From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- sound/soc/codecs/max98927.h | 271 ++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 271 insertions(+) create mode 100644 sound/soc/codecs/max98927.h (limited to 'sound/soc/codecs/max98927.h') diff --git a/sound/soc/codecs/max98927.h b/sound/soc/codecs/max98927.h new file mode 100644 index 000000000..2353910f5 --- /dev/null +++ b/sound/soc/codecs/max98927.h @@ -0,0 +1,271 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ +/* + * max98927.h -- MAX98927 ALSA Soc Audio driver + * + * Copyright (C) 2016-2017 Maxim Integrated Products + * Author: Ryan Lee + */ +#ifndef _MAX98927_H +#define _MAX98927_H + +/* Register Values */ +#define MAX98927_R0001_INT_RAW1 0x0001 +#define MAX98927_R0002_INT_RAW2 0x0002 +#define MAX98927_R0003_INT_RAW3 0x0003 +#define MAX98927_R0004_INT_STATE1 0x0004 +#define MAX98927_R0005_INT_STATE2 0x0005 +#define MAX98927_R0006_INT_STATE3 0x0006 +#define MAX98927_R0007_INT_FLAG1 0x0007 +#define MAX98927_R0008_INT_FLAG2 0x0008 +#define MAX98927_R0009_INT_FLAG3 0x0009 +#define MAX98927_R000A_INT_EN1 0x000A +#define MAX98927_R000B_INT_EN2 0x000B +#define MAX98927_R000C_INT_EN3 0x000C +#define MAX98927_R000D_INT_FLAG_CLR1 0x000D +#define MAX98927_R000E_INT_FLAG_CLR2 0x000E +#define MAX98927_R000F_INT_FLAG_CLR3 0x000F +#define MAX98927_R0010_IRQ_CTRL 0x0010 +#define MAX98927_R0011_CLK_MON 0x0011 +#define MAX98927_R0012_WDOG_CTRL 0x0012 +#define MAX98927_R0013_WDOG_RST 0x0013 +#define MAX98927_R0014_MEAS_ADC_THERM_WARN_THRESH 0x0014 +#define MAX98927_R0015_MEAS_ADC_THERM_SHDN_THRESH 0x0015 +#define MAX98927_R0016_MEAS_ADC_THERM_HYSTERESIS 0x0016 +#define MAX98927_R0017_PIN_CFG 0x0017 +#define MAX98927_R0018_PCM_RX_EN_A 0x0018 +#define MAX98927_R0019_PCM_RX_EN_B 0x0019 +#define MAX98927_R001A_PCM_TX_EN_A 0x001A +#define MAX98927_R001B_PCM_TX_EN_B 0x001B +#define MAX98927_R001C_PCM_TX_HIZ_CTRL_A 0x001C +#define MAX98927_R001D_PCM_TX_HIZ_CTRL_B 0x001D +#define MAX98927_R001E_PCM_TX_CH_SRC_A 0x001E +#define MAX98927_R001F_PCM_TX_CH_SRC_B 0x001F +#define MAX98927_R0020_PCM_MODE_CFG 0x0020 +#define MAX98927_R0021_PCM_MASTER_MODE 0x0021 +#define MAX98927_R0022_PCM_CLK_SETUP 0x0022 +#define MAX98927_R0023_PCM_SR_SETUP1 0x0023 +#define MAX98927_R0024_PCM_SR_SETUP2 0x0024 +#define MAX98927_R0025_PCM_TO_SPK_MONOMIX_A 0x0025 +#define MAX98927_R0026_PCM_TO_SPK_MONOMIX_B 0x0026 +#define MAX98927_R0027_ICC_RX_EN_A 0x0027 +#define MAX98927_R0028_ICC_RX_EN_B 0x0028 +#define MAX98927_R002B_ICC_TX_EN_A 0x002B +#define MAX98927_R002C_ICC_TX_EN_B 0x002C +#define MAX98927_R002E_ICC_HIZ_MANUAL_MODE 0x002E +#define MAX98927_R002F_ICC_TX_HIZ_EN_A 0x002F +#define MAX98927_R0030_ICC_TX_HIZ_EN_B 0x0030 +#define MAX98927_R0031_ICC_LNK_EN 0x0031 +#define MAX98927_R0032_PDM_TX_EN 0x0032 +#define MAX98927_R0033_PDM_TX_HIZ_CTRL 0x0033 +#define MAX98927_R0034_PDM_TX_CTRL 0x0034 +#define MAX98927_R0035_PDM_RX_CTRL 0x0035 +#define MAX98927_R0036_AMP_VOL_CTRL 0x0036 +#define MAX98927_R0037_AMP_DSP_CFG 0x0037 +#define MAX98927_R0038_TONE_GEN_DC_CFG 0x0038 +#define MAX98927_R0039_DRE_CTRL 0x0039 +#define MAX98927_R003A_AMP_EN 0x003A +#define MAX98927_R003B_SPK_SRC_SEL 0x003B +#define MAX98927_R003C_SPK_GAIN 0x003C +#define MAX98927_R003D_SSM_CFG 0x003D +#define MAX98927_R003E_MEAS_EN 0x003E +#define MAX98927_R003F_MEAS_DSP_CFG 0x003F +#define MAX98927_R0040_BOOST_CTRL0 0x0040 +#define MAX98927_R0041_BOOST_CTRL3 0x0041 +#define MAX98927_R0042_BOOST_CTRL1 0x0042 +#define MAX98927_R0043_MEAS_ADC_CFG 0x0043 +#define MAX98927_R0044_MEAS_ADC_BASE_MSB 0x0044 +#define MAX98927_R0045_MEAS_ADC_BASE_LSB 0x0045 +#define MAX98927_R0046_ADC_CH0_DIVIDE 0x0046 +#define MAX98927_R0047_ADC_CH1_DIVIDE 0x0047 +#define MAX98927_R0048_ADC_CH2_DIVIDE 0x0048 +#define MAX98927_R0049_ADC_CH0_FILT_CFG 0x0049 +#define MAX98927_R004A_ADC_CH1_FILT_CFG 0x004A +#define MAX98927_R004B_ADC_CH2_FILT_CFG 0x004B +#define MAX98927_R004C_MEAS_ADC_CH0_READ 0x004C +#define MAX98927_R004D_MEAS_ADC_CH1_READ 0x004D +#define MAX98927_R004E_MEAS_ADC_CH2_READ 0x004E +#define MAX98927_R0051_BROWNOUT_STATUS 0x0051 +#define MAX98927_R0052_BROWNOUT_EN 0x0052 +#define MAX98927_R0053_BROWNOUT_INFINITE_HOLD 0x0053 +#define MAX98927_R0054_BROWNOUT_INFINITE_HOLD_CLR 0x0054 +#define MAX98927_R0055_BROWNOUT_LVL_HOLD 0x0055 +#define MAX98927_R005A_BROWNOUT_LVL1_THRESH 0x005A +#define MAX98927_R005B_BROWNOUT_LVL2_THRESH 0x005B +#define MAX98927_R005C_BROWNOUT_LVL3_THRESH 0x005C +#define MAX98927_R005D_BROWNOUT_LVL4_THRESH 0x005D +#define MAX98927_R005E_BROWNOUT_THRESH_HYSTERYSIS 0x005E +#define MAX98927_R005F_BROWNOUT_AMP_LIMITER_ATK_REL 0x005F +#define MAX98927_R0060_BROWNOUT_AMP_GAIN_ATK_REL 0x0060 +#define MAX98927_R0061_BROWNOUT_AMP1_CLIP_MODE 0x0061 +#define MAX98927_R0072_BROWNOUT_LVL1_CUR_LIMIT 0x0072 +#define MAX98927_R0073_BROWNOUT_LVL1_AMP1_CTRL1 0x0073 +#define MAX98927_R0074_BROWNOUT_LVL1_AMP1_CTRL2 0x0074 +#define MAX98927_R0075_BROWNOUT_LVL1_AMP1_CTRL3 0x0075 +#define MAX98927_R0076_BROWNOUT_LVL2_CUR_LIMIT 0x0076 +#define MAX98927_R0077_BROWNOUT_LVL2_AMP1_CTRL1 0x0077 +#define MAX98927_R0078_BROWNOUT_LVL2_AMP1_CTRL2 0x0078 +#define MAX98927_R0079_BROWNOUT_LVL2_AMP1_CTRL3 0x0079 +#define MAX98927_R007A_BROWNOUT_LVL3_CUR_LIMIT 0x007A +#define MAX98927_R007B_BROWNOUT_LVL3_AMP1_CTRL1 0x007B +#define MAX98927_R007C_BROWNOUT_LVL3_AMP1_CTRL2 0x007C +#define MAX98927_R007D_BROWNOUT_LVL3_AMP1_CTRL3 0x007D +#define MAX98927_R007E_BROWNOUT_LVL4_CUR_LIMIT 0x007E +#define MAX98927_R007F_BROWNOUT_LVL4_AMP1_CTRL1 0x007F +#define MAX98927_R0080_BROWNOUT_LVL4_AMP1_CTRL2 0x0080 +#define MAX98927_R0081_BROWNOUT_LVL4_AMP1_CTRL3 0x0081 +#define MAX98927_R0082_ENV_TRACK_VOUT_HEADROOM 0x0082 +#define MAX98927_R0083_ENV_TRACK_BOOST_VOUT_DELAY 0x0083 +#define MAX98927_R0084_ENV_TRACK_REL_RATE 0x0084 +#define MAX98927_R0085_ENV_TRACK_HOLD_RATE 0x0085 +#define MAX98927_R0086_ENV_TRACK_CTRL 0x0086 +#define MAX98927_R0087_ENV_TRACK_BOOST_VOUT_READ 0x0087 +#define MAX98927_R00FF_GLOBAL_SHDN 0x00FF +#define MAX98927_R0100_SOFT_RESET 0x0100 +#define MAX98927_R01FF_REV_ID 0x01FF + +/* MAX98927_R0018_PCM_RX_EN_A */ +#define MAX98927_PCM_RX_CH0_EN (0x1 << 0) +#define MAX98927_PCM_RX_CH1_EN (0x1 << 1) +#define MAX98927_PCM_RX_CH2_EN (0x1 << 2) +#define MAX98927_PCM_RX_CH3_EN (0x1 << 3) +#define MAX98927_PCM_RX_CH4_EN (0x1 << 4) +#define MAX98927_PCM_RX_CH5_EN (0x1 << 5) +#define MAX98927_PCM_RX_CH6_EN (0x1 << 6) +#define MAX98927_PCM_RX_CH7_EN (0x1 << 7) + +/* MAX98927_R001A_PCM_TX_EN_A */ +#define MAX98927_PCM_TX_CH0_EN (0x1 << 0) +#define MAX98927_PCM_TX_CH1_EN (0x1 << 1) +#define MAX98927_PCM_TX_CH2_EN (0x1 << 2) +#define MAX98927_PCM_TX_CH3_EN (0x1 << 3) +#define MAX98927_PCM_TX_CH4_EN (0x1 << 4) +#define MAX98927_PCM_TX_CH5_EN (0x1 << 5) +#define MAX98927_PCM_TX_CH6_EN (0x1 << 6) +#define MAX98927_PCM_TX_CH7_EN (0x1 << 7) + +/* MAX98927_R001E_PCM_TX_CH_SRC_A */ +#define MAX98927_PCM_TX_CH_SRC_A_V_SHIFT (0) +#define MAX98927_PCM_TX_CH_SRC_A_I_SHIFT (4) + +/* MAX98927_R001F_PCM_TX_CH_SRC_B */ +#define MAX98927_PCM_TX_CH_INTERLEAVE_MASK (0x1 << 5) + +/* MAX98927_R0020_PCM_MODE_CFG */ +#define MAX98927_PCM_MODE_CFG_PCM_BCLKEDGE (0x1 << 2) +#define MAX98927_PCM_MODE_CFG_FORMAT_MASK (0x7 << 3) +#define MAX98927_PCM_MODE_CFG_FORMAT_SHIFT (3) +#define MAX98927_PCM_FORMAT_I2S (0x0 << 0) +#define MAX98927_PCM_FORMAT_LJ (0x1 << 0) +#define MAX98927_PCM_FORMAT_TDM_MODE0 (0x3 << 0) +#define MAX98927_PCM_FORMAT_TDM_MODE1 (0x4 << 0) +#define MAX98927_PCM_FORMAT_TDM_MODE2 (0x5 << 0) +#define MAX98927_PCM_MODE_CFG_CHANSZ_MASK (0x3 << 6) +#define MAX98927_PCM_MODE_CFG_CHANSZ_16 (0x1 << 6) +#define MAX98927_PCM_MODE_CFG_CHANSZ_24 (0x2 << 6) +#define MAX98927_PCM_MODE_CFG_CHANSZ_32 (0x3 << 6) + +/* MAX98927_R0021_PCM_MASTER_MODE */ +#define MAX98927_PCM_MASTER_MODE_MASK (0x3 << 0) +#define MAX98927_PCM_MASTER_MODE_SLAVE (0x0 << 0) +#define MAX98927_PCM_MASTER_MODE_MASTER (0x3 << 0) + +#define MAX98927_PCM_MASTER_MODE_MCLK_MASK (0xF << 2) +#define MAX98927_PCM_MASTER_MODE_MCLK_RATE_SHIFT (2) + +/* MAX98927_R0022_PCM_CLK_SETUP */ +#define MAX98927_PCM_CLK_SETUP_BSEL_MASK (0xF << 0) + +/* MAX98927_R0023_PCM_SR_SETUP1 */ +#define MAX98927_PCM_SR_SET1_SR_MASK (0xF << 0) + +#define MAX98927_PCM_SR_SET1_SR_8000 (0x0 << 0) +#define MAX98927_PCM_SR_SET1_SR_11025 (0x1 << 0) +#define MAX98927_PCM_SR_SET1_SR_12000 (0x2 << 0) +#define MAX98927_PCM_SR_SET1_SR_16000 (0x3 << 0) +#define MAX98927_PCM_SR_SET1_SR_22050 (0x4 << 0) +#define MAX98927_PCM_SR_SET1_SR_24000 (0x5 << 0) +#define MAX98927_PCM_SR_SET1_SR_32000 (0x6 << 0) +#define MAX98927_PCM_SR_SET1_SR_44100 (0x7 << 0) +#define MAX98927_PCM_SR_SET1_SR_48000 (0x8 << 0) + +/* MAX98927_R0024_PCM_SR_SETUP2 */ +#define MAX98927_PCM_SR_SET2_SR_MASK (0xF << 4) +#define MAX98927_PCM_SR_SET2_SR_SHIFT (4) +#define MAX98927_PCM_SR_SET2_IVADC_SR_MASK (0xf << 0) + +/* MAX98927_R0025_PCM_TO_SPK_MONOMIX_A */ +#define MAX98927_PCM_TO_SPK_MONOMIX_CFG_MASK (0x3 << 6) +#define MAX98927_PCM_TO_SPK_MONOMIX_CFG_SHIFT (6) + +/* MAX98927_R0035_PDM_RX_CTRL */ +#define MAX98927_PDM_RX_EN_MASK (0x1 << 0) + +/* MAX98927_R0036_AMP_VOL_CTRL */ +#define MAX98927_AMP_VOL_SEL (0x1 << 7) +#define MAX98927_AMP_VOL_SEL_WIDTH (1) +#define MAX98927_AMP_VOL_SEL_SHIFT (7) +#define MAX98927_AMP_VOL_MASK (0x7f << 0) +#define MAX98927_AMP_VOL_WIDTH (7) +#define MAX98927_AMP_VOL_SHIFT (0) + +/* MAX98927_R0037_AMP_DSP_CFG */ +#define MAX98927_AMP_DSP_CFG_DCBLK_EN (0x1 << 0) +#define MAX98927_AMP_DSP_CFG_DITH_EN (0x1 << 1) +#define MAX98927_AMP_DSP_CFG_RMP_BYPASS (0x1 << 4) +#define MAX98927_AMP_DSP_CFG_DAC_INV (0x1 << 5) +#define MAX98927_AMP_DSP_CFG_RMP_SHIFT (4) + +/* MAX98927_R0039_DRE_CTRL */ +#define MAX98927_DRE_CTRL_DRE_EN (0x1 << 0) +#define MAX98927_DRE_EN_SHIFT 0x1 + +/* MAX98927_R003A_AMP_EN */ +#define MAX98927_AMP_EN_MASK (0x1 << 0) + +/* MAX98927_R003B_SPK_SRC_SEL */ +#define MAX98927_SPK_SRC_MASK (0x3 << 0) + +/* MAX98927_R003C_SPK_GAIN */ +#define MAX98927_SPK_PCM_GAIN_MASK (0x7 << 0) +#define MAX98927_SPK_PDM_GAIN_MASK (0x7 << 4) +#define MAX98927_SPK_GAIN_WIDTH (3) + +/* MAX98927_R003E_MEAS_EN */ +#define MAX98927_MEAS_V_EN (0x1 << 0) +#define MAX98927_MEAS_I_EN (0x1 << 1) + +/* MAX98927_R0040_BOOST_CTRL0 */ +#define MAX98927_BOOST_CTRL0_VOUT_MASK (0x1f << 0) +#define MAX98927_BOOST_CTRL0_PVDD_MASK (0x1 << 7) +#define MAX98927_BOOST_CTRL0_PVDD_EN_SHIFT (7) + +/* MAX98927_R0052_BROWNOUT_EN */ +#define MAX98927_BROWNOUT_BDE_EN (0x1 << 0) +#define MAX98927_BROWNOUT_AMP_EN (0x1 << 1) +#define MAX98927_BROWNOUT_DSP_EN (0x1 << 2) +#define MAX98927_BROWNOUT_DSP_SHIFT (2) + +/* MAX98927_R0100_SOFT_RESET */ +#define MAX98927_SOFT_RESET (0x1 << 0) + +/* MAX98927_R00FF_GLOBAL_SHDN */ +#define MAX98927_GLOBAL_EN_MASK (0x1 << 0) + +struct max98927_priv { + struct regmap *regmap; + struct snd_soc_component *component; + struct max98927_pdata *pdata; + struct gpio_desc *reset_gpio; + unsigned int spk_gain; + unsigned int sysclk; + unsigned int v_l_slot; + unsigned int i_l_slot; + bool interleave_mode; + unsigned int ch_size; + unsigned int rate; + unsigned int iface; + unsigned int provider; + unsigned int digital_gain; + bool tdm_mode; +}; +#endif -- cgit v1.2.3