From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- sound/soc/codecs/rt1308-sdw.c | 824 ++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 824 insertions(+) create mode 100644 sound/soc/codecs/rt1308-sdw.c (limited to 'sound/soc/codecs/rt1308-sdw.c') diff --git a/sound/soc/codecs/rt1308-sdw.c b/sound/soc/codecs/rt1308-sdw.c new file mode 100644 index 000000000..ca2790d63 --- /dev/null +++ b/sound/soc/codecs/rt1308-sdw.c @@ -0,0 +1,824 @@ +// SPDX-License-Identifier: GPL-2.0 +// +// rt1308-sdw.c -- rt1308 ALSA SoC audio driver +// +// Copyright(c) 2019 Realtek Semiconductor Corp. +// +// +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include "rt1308.h" +#include "rt1308-sdw.h" + +static bool rt1308_readable_register(struct device *dev, unsigned int reg) +{ + switch (reg) { + case 0x00e0: + case 0x00f0: + case 0x2f01 ... 0x2f07: + case 0x3000 ... 0x3001: + case 0x3004 ... 0x3005: + case 0x3008: + case 0x300a: + case 0xc000 ... 0xcff3: + return true; + default: + return false; + } +} + +static bool rt1308_volatile_register(struct device *dev, unsigned int reg) +{ + switch (reg) { + case 0x2f01 ... 0x2f07: + case 0x3000 ... 0x3001: + case 0x3004 ... 0x3005: + case 0x3008: + case 0x300a: + case 0xc000: + case 0xc710: + case 0xc860 ... 0xc863: + case 0xc870 ... 0xc873: + return true; + default: + return false; + } +} + +static const struct regmap_config rt1308_sdw_regmap = { + .reg_bits = 32, + .val_bits = 8, + .readable_reg = rt1308_readable_register, + .volatile_reg = rt1308_volatile_register, + .max_register = 0xcfff, + .reg_defaults = rt1308_reg_defaults, + .num_reg_defaults = ARRAY_SIZE(rt1308_reg_defaults), + .cache_type = REGCACHE_RBTREE, + .use_single_read = true, + .use_single_write = true, +}; + +/* Bus clock frequency */ +#define RT1308_CLK_FREQ_9600000HZ 9600000 +#define RT1308_CLK_FREQ_12000000HZ 12000000 +#define RT1308_CLK_FREQ_6000000HZ 6000000 +#define RT1308_CLK_FREQ_4800000HZ 4800000 +#define RT1308_CLK_FREQ_2400000HZ 2400000 +#define RT1308_CLK_FREQ_12288000HZ 12288000 + +static int rt1308_clock_config(struct device *dev) +{ + struct rt1308_sdw_priv *rt1308 = dev_get_drvdata(dev); + unsigned int clk_freq, value; + + clk_freq = (rt1308->params.curr_dr_freq >> 1); + + switch (clk_freq) { + case RT1308_CLK_FREQ_12000000HZ: + value = 0x0; + break; + case RT1308_CLK_FREQ_6000000HZ: + value = 0x1; + break; + case RT1308_CLK_FREQ_9600000HZ: + value = 0x2; + break; + case RT1308_CLK_FREQ_4800000HZ: + value = 0x3; + break; + case RT1308_CLK_FREQ_2400000HZ: + value = 0x4; + break; + case RT1308_CLK_FREQ_12288000HZ: + value = 0x5; + break; + default: + return -EINVAL; + } + + regmap_write(rt1308->regmap, 0xe0, value); + regmap_write(rt1308->regmap, 0xf0, value); + + dev_dbg(dev, "%s complete, clk_freq=%d\n", __func__, clk_freq); + + return 0; +} + +static int rt1308_read_prop(struct sdw_slave *slave) +{ + struct sdw_slave_prop *prop = &slave->prop; + int nval, i; + u32 bit; + unsigned long addr; + struct sdw_dpn_prop *dpn; + + prop->scp_int1_mask = SDW_SCP_INT1_BUS_CLASH | SDW_SCP_INT1_PARITY; + prop->quirks = SDW_SLAVE_QUIRKS_INVALID_INITIAL_PARITY; + + prop->paging_support = true; + + /* first we need to allocate memory for set bits in port lists */ + prop->source_ports = 0x00; /* BITMAP: 00010100 (not enable yet) */ + prop->sink_ports = 0x2; /* BITMAP: 00000010 */ + + /* for sink */ + nval = hweight32(prop->sink_ports); + prop->sink_dpn_prop = devm_kcalloc(&slave->dev, nval, + sizeof(*prop->sink_dpn_prop), + GFP_KERNEL); + if (!prop->sink_dpn_prop) + return -ENOMEM; + + i = 0; + dpn = prop->sink_dpn_prop; + addr = prop->sink_ports; + for_each_set_bit(bit, &addr, 32) { + dpn[i].num = bit; + dpn[i].type = SDW_DPN_FULL; + dpn[i].simple_ch_prep_sm = true; + dpn[i].ch_prep_timeout = 10; + i++; + } + + /* set the timeout values */ + prop->clk_stop_timeout = 20; + + dev_dbg(&slave->dev, "%s\n", __func__); + + return 0; +} + +static void rt1308_apply_calib_params(struct rt1308_sdw_priv *rt1308) +{ + unsigned int efuse_m_btl_l, efuse_m_btl_r, tmp; + unsigned int efuse_c_btl_l, efuse_c_btl_r; + + /* read efuse to apply calibration parameters */ + regmap_write(rt1308->regmap, 0xc7f0, 0x04); + regmap_write(rt1308->regmap, 0xc7f1, 0xfe); + msleep(100); + regmap_write(rt1308->regmap, 0xc7f0, 0x44); + msleep(20); + regmap_write(rt1308->regmap, 0xc240, 0x10); + + regmap_read(rt1308->regmap, 0xc861, &tmp); + efuse_m_btl_l = tmp; + regmap_read(rt1308->regmap, 0xc860, &tmp); + efuse_m_btl_l = efuse_m_btl_l | (tmp << 8); + regmap_read(rt1308->regmap, 0xc863, &tmp); + efuse_c_btl_l = tmp; + regmap_read(rt1308->regmap, 0xc862, &tmp); + efuse_c_btl_l = efuse_c_btl_l | (tmp << 8); + regmap_read(rt1308->regmap, 0xc871, &tmp); + efuse_m_btl_r = tmp; + regmap_read(rt1308->regmap, 0xc870, &tmp); + efuse_m_btl_r = efuse_m_btl_r | (tmp << 8); + regmap_read(rt1308->regmap, 0xc873, &tmp); + efuse_c_btl_r = tmp; + regmap_read(rt1308->regmap, 0xc872, &tmp); + efuse_c_btl_r = efuse_c_btl_r | (tmp << 8); + dev_dbg(&rt1308->sdw_slave->dev, "%s m_btl_l=0x%x, m_btl_r=0x%x\n", __func__, + efuse_m_btl_l, efuse_m_btl_r); + dev_dbg(&rt1308->sdw_slave->dev, "%s c_btl_l=0x%x, c_btl_r=0x%x\n", __func__, + efuse_c_btl_l, efuse_c_btl_r); +} + +static void rt1308_apply_bq_params(struct rt1308_sdw_priv *rt1308) +{ + unsigned int i, reg, data; + + for (i = 0; i < rt1308->bq_params_cnt; i += 3) { + reg = rt1308->bq_params[i] | (rt1308->bq_params[i + 1] << 8); + data = rt1308->bq_params[i + 2]; + regmap_write(rt1308->regmap, reg, data); + } +} + +static int rt1308_io_init(struct device *dev, struct sdw_slave *slave) +{ + struct rt1308_sdw_priv *rt1308 = dev_get_drvdata(dev); + int ret = 0; + unsigned int tmp; + + if (rt1308->hw_init) + return 0; + + if (rt1308->first_hw_init) { + regcache_cache_only(rt1308->regmap, false); + regcache_cache_bypass(rt1308->regmap, true); + } + + /* + * PM runtime is only enabled when a Slave reports as Attached + */ + if (!rt1308->first_hw_init) { + /* set autosuspend parameters */ + pm_runtime_set_autosuspend_delay(&slave->dev, 3000); + pm_runtime_use_autosuspend(&slave->dev); + + /* update count of parent 'active' children */ + pm_runtime_set_active(&slave->dev); + + /* make sure the device does not suspend immediately */ + pm_runtime_mark_last_busy(&slave->dev); + + pm_runtime_enable(&slave->dev); + } + + pm_runtime_get_noresume(&slave->dev); + + /* sw reset */ + regmap_write(rt1308->regmap, RT1308_SDW_RESET, 0); + + regmap_read(rt1308->regmap, 0xc710, &tmp); + rt1308->hw_ver = tmp; + dev_dbg(dev, "%s, hw_ver=0x%x\n", __func__, rt1308->hw_ver); + + /* initial settings */ + regmap_write(rt1308->regmap, 0xc103, 0xc0); + regmap_write(rt1308->regmap, 0xc030, 0x17); + regmap_write(rt1308->regmap, 0xc031, 0x81); + regmap_write(rt1308->regmap, 0xc032, 0x26); + regmap_write(rt1308->regmap, 0xc040, 0x80); + regmap_write(rt1308->regmap, 0xc041, 0x80); + regmap_write(rt1308->regmap, 0xc042, 0x06); + regmap_write(rt1308->regmap, 0xc052, 0x0a); + regmap_write(rt1308->regmap, 0xc080, 0x0a); + regmap_write(rt1308->regmap, 0xc060, 0x02); + regmap_write(rt1308->regmap, 0xc061, 0x75); + regmap_write(rt1308->regmap, 0xc062, 0x05); + regmap_write(rt1308->regmap, 0xc171, 0x07); + regmap_write(rt1308->regmap, 0xc173, 0x0d); + if (rt1308->hw_ver == RT1308_VER_C) { + regmap_write(rt1308->regmap, 0xc311, 0x7f); + regmap_write(rt1308->regmap, 0xc300, 0x09); + } else { + regmap_write(rt1308->regmap, 0xc311, 0x4f); + regmap_write(rt1308->regmap, 0xc300, 0x0b); + } + regmap_write(rt1308->regmap, 0xc900, 0x5a); + regmap_write(rt1308->regmap, 0xc1a0, 0x84); + regmap_write(rt1308->regmap, 0xc1a1, 0x01); + regmap_write(rt1308->regmap, 0xc360, 0x78); + regmap_write(rt1308->regmap, 0xc361, 0x87); + regmap_write(rt1308->regmap, 0xc0a1, 0x71); + regmap_write(rt1308->regmap, 0xc210, 0x00); + regmap_write(rt1308->regmap, 0xc070, 0x00); + regmap_write(rt1308->regmap, 0xc100, 0xd7); + regmap_write(rt1308->regmap, 0xc101, 0xd7); + + if (rt1308->first_hw_init) { + regcache_cache_bypass(rt1308->regmap, false); + regcache_mark_dirty(rt1308->regmap); + } else + rt1308->first_hw_init = true; + + /* Mark Slave initialization complete */ + rt1308->hw_init = true; + + pm_runtime_mark_last_busy(&slave->dev); + pm_runtime_put_autosuspend(&slave->dev); + + dev_dbg(&slave->dev, "%s hw_init complete\n", __func__); + + return ret; +} + +static int rt1308_update_status(struct sdw_slave *slave, + enum sdw_slave_status status) +{ + struct rt1308_sdw_priv *rt1308 = dev_get_drvdata(&slave->dev); + + /* Update the status */ + rt1308->status = status; + + if (status == SDW_SLAVE_UNATTACHED) + rt1308->hw_init = false; + + /* + * Perform initialization only if slave status is present and + * hw_init flag is false + */ + if (rt1308->hw_init || rt1308->status != SDW_SLAVE_ATTACHED) + return 0; + + /* perform I/O transfers required for Slave initialization */ + return rt1308_io_init(&slave->dev, slave); +} + +static int rt1308_bus_config(struct sdw_slave *slave, + struct sdw_bus_params *params) +{ + struct rt1308_sdw_priv *rt1308 = dev_get_drvdata(&slave->dev); + int ret; + + memcpy(&rt1308->params, params, sizeof(*params)); + + ret = rt1308_clock_config(&slave->dev); + if (ret < 0) + dev_err(&slave->dev, "Invalid clk config"); + + return ret; +} + +static int rt1308_interrupt_callback(struct sdw_slave *slave, + struct sdw_slave_intr_status *status) +{ + dev_dbg(&slave->dev, + "%s control_port_stat=%x", __func__, status->control_port); + + return 0; +} + +static int rt1308_classd_event(struct snd_soc_dapm_widget *w, + struct snd_kcontrol *kcontrol, int event) +{ + struct snd_soc_component *component = + snd_soc_dapm_to_component(w->dapm); + struct rt1308_sdw_priv *rt1308 = + snd_soc_component_get_drvdata(component); + + switch (event) { + case SND_SOC_DAPM_POST_PMU: + msleep(30); + snd_soc_component_update_bits(component, + RT1308_SDW_OFFSET | (RT1308_POWER_STATUS << 4), + 0x3, 0x3); + msleep(40); + rt1308_apply_calib_params(rt1308); + break; + case SND_SOC_DAPM_PRE_PMD: + snd_soc_component_update_bits(component, + RT1308_SDW_OFFSET | (RT1308_POWER_STATUS << 4), + 0x3, 0); + usleep_range(150000, 200000); + break; + + default: + break; + } + + return 0; +} + +static const char * const rt1308_rx_data_ch_select[] = { + "LR", + "LL", + "RL", + "RR", +}; + +static SOC_ENUM_SINGLE_DECL(rt1308_rx_data_ch_enum, + RT1308_SDW_OFFSET | (RT1308_DATA_PATH << 4), 0, + rt1308_rx_data_ch_select); + +static const struct snd_kcontrol_new rt1308_snd_controls[] = { + + /* I2S Data Channel Selection */ + SOC_ENUM("RX Channel Select", rt1308_rx_data_ch_enum), +}; + +static const struct snd_kcontrol_new rt1308_sto_dac_l = + SOC_DAPM_SINGLE_AUTODISABLE("Switch", + RT1308_SDW_OFFSET_BYTE3 | (RT1308_DAC_SET << 4), + RT1308_DVOL_MUTE_L_EN_SFT, 1, 1); + +static const struct snd_kcontrol_new rt1308_sto_dac_r = + SOC_DAPM_SINGLE_AUTODISABLE("Switch", + RT1308_SDW_OFFSET_BYTE3 | (RT1308_DAC_SET << 4), + RT1308_DVOL_MUTE_R_EN_SFT, 1, 1); + +static const struct snd_soc_dapm_widget rt1308_dapm_widgets[] = { + /* Audio Interface */ + SND_SOC_DAPM_AIF_IN("AIF1RX", "DP1 Playback", 0, SND_SOC_NOPM, 0, 0), + + /* Supply Widgets */ + SND_SOC_DAPM_SUPPLY("MBIAS20U", + RT1308_SDW_OFFSET | (RT1308_POWER << 4), 7, 0, NULL, 0), + SND_SOC_DAPM_SUPPLY("ALDO", + RT1308_SDW_OFFSET | (RT1308_POWER << 4), 6, 0, NULL, 0), + SND_SOC_DAPM_SUPPLY("DBG", + RT1308_SDW_OFFSET | (RT1308_POWER << 4), 5, 0, NULL, 0), + SND_SOC_DAPM_SUPPLY("DACL", + RT1308_SDW_OFFSET | (RT1308_POWER << 4), 4, 0, NULL, 0), + SND_SOC_DAPM_SUPPLY("CLK25M", + RT1308_SDW_OFFSET | (RT1308_POWER << 4), 2, 0, NULL, 0), + SND_SOC_DAPM_SUPPLY("ADC_R", + RT1308_SDW_OFFSET | (RT1308_POWER << 4), 1, 0, NULL, 0), + SND_SOC_DAPM_SUPPLY("ADC_L", + RT1308_SDW_OFFSET | (RT1308_POWER << 4), 0, 0, NULL, 0), + SND_SOC_DAPM_SUPPLY("DAC Power", + RT1308_SDW_OFFSET | (RT1308_POWER << 4), 3, 0, NULL, 0), + + SND_SOC_DAPM_SUPPLY("DLDO", + RT1308_SDW_OFFSET_BYTE1 | (RT1308_POWER << 4), 5, 0, NULL, 0), + SND_SOC_DAPM_SUPPLY("VREF", + RT1308_SDW_OFFSET_BYTE1 | (RT1308_POWER << 4), 4, 0, NULL, 0), + SND_SOC_DAPM_SUPPLY("MIXER_R", + RT1308_SDW_OFFSET_BYTE1 | (RT1308_POWER << 4), 2, 0, NULL, 0), + SND_SOC_DAPM_SUPPLY("MIXER_L", + RT1308_SDW_OFFSET_BYTE1 | (RT1308_POWER << 4), 1, 0, NULL, 0), + SND_SOC_DAPM_SUPPLY("MBIAS4U", + RT1308_SDW_OFFSET_BYTE1 | (RT1308_POWER << 4), 0, 0, NULL, 0), + + SND_SOC_DAPM_SUPPLY("PLL2_LDO", + RT1308_SDW_OFFSET_BYTE2 | (RT1308_POWER << 4), 4, 0, NULL, 0), + SND_SOC_DAPM_SUPPLY("PLL2B", + RT1308_SDW_OFFSET_BYTE2 | (RT1308_POWER << 4), 3, 0, NULL, 0), + SND_SOC_DAPM_SUPPLY("PLL2F", + RT1308_SDW_OFFSET_BYTE2 | (RT1308_POWER << 4), 2, 0, NULL, 0), + SND_SOC_DAPM_SUPPLY("PLL2F2", + RT1308_SDW_OFFSET_BYTE2 | (RT1308_POWER << 4), 1, 0, NULL, 0), + SND_SOC_DAPM_SUPPLY("PLL2B2", + RT1308_SDW_OFFSET_BYTE2 | (RT1308_POWER << 4), 0, 0, NULL, 0), + + /* Digital Interface */ + SND_SOC_DAPM_DAC("DAC", NULL, SND_SOC_NOPM, 0, 0), + SND_SOC_DAPM_SWITCH("DAC L", SND_SOC_NOPM, 0, 0, &rt1308_sto_dac_l), + SND_SOC_DAPM_SWITCH("DAC R", SND_SOC_NOPM, 0, 0, &rt1308_sto_dac_r), + + /* Output Lines */ + SND_SOC_DAPM_PGA_E("CLASS D", SND_SOC_NOPM, 0, 0, NULL, 0, + rt1308_classd_event, + SND_SOC_DAPM_PRE_PMD | SND_SOC_DAPM_POST_PMU), + SND_SOC_DAPM_OUTPUT("SPOL"), + SND_SOC_DAPM_OUTPUT("SPOR"), +}; + +static const struct snd_soc_dapm_route rt1308_dapm_routes[] = { + + { "DAC", NULL, "AIF1RX" }, + + { "DAC", NULL, "MBIAS20U" }, + { "DAC", NULL, "ALDO" }, + { "DAC", NULL, "DBG" }, + { "DAC", NULL, "DACL" }, + { "DAC", NULL, "CLK25M" }, + { "DAC", NULL, "ADC_R" }, + { "DAC", NULL, "ADC_L" }, + { "DAC", NULL, "DLDO" }, + { "DAC", NULL, "VREF" }, + { "DAC", NULL, "MIXER_R" }, + { "DAC", NULL, "MIXER_L" }, + { "DAC", NULL, "MBIAS4U" }, + { "DAC", NULL, "PLL2_LDO" }, + { "DAC", NULL, "PLL2B" }, + { "DAC", NULL, "PLL2F" }, + { "DAC", NULL, "PLL2F2" }, + { "DAC", NULL, "PLL2B2" }, + + { "DAC L", "Switch", "DAC" }, + { "DAC R", "Switch", "DAC" }, + { "DAC L", NULL, "DAC Power" }, + { "DAC R", NULL, "DAC Power" }, + + { "CLASS D", NULL, "DAC L" }, + { "CLASS D", NULL, "DAC R" }, + { "SPOL", NULL, "CLASS D" }, + { "SPOR", NULL, "CLASS D" }, +}; + +static int rt1308_set_sdw_stream(struct snd_soc_dai *dai, void *sdw_stream, + int direction) +{ + struct sdw_stream_data *stream; + + if (!sdw_stream) + return 0; + + stream = kzalloc(sizeof(*stream), GFP_KERNEL); + if (!stream) + return -ENOMEM; + + stream->sdw_stream = sdw_stream; + + /* Use tx_mask or rx_mask to configure stream tag and set dma_data */ + if (direction == SNDRV_PCM_STREAM_PLAYBACK) + dai->playback_dma_data = stream; + else + dai->capture_dma_data = stream; + + return 0; +} + +static void rt1308_sdw_shutdown(struct snd_pcm_substream *substream, + struct snd_soc_dai *dai) +{ + struct sdw_stream_data *stream; + + stream = snd_soc_dai_get_dma_data(dai, substream); + snd_soc_dai_set_dma_data(dai, substream, NULL); + kfree(stream); +} + +static int rt1308_sdw_set_tdm_slot(struct snd_soc_dai *dai, + unsigned int tx_mask, + unsigned int rx_mask, + int slots, int slot_width) +{ + struct snd_soc_component *component = dai->component; + struct rt1308_sdw_priv *rt1308 = + snd_soc_component_get_drvdata(component); + + if (tx_mask) + return -EINVAL; + + if (slots > 2) + return -EINVAL; + + rt1308->rx_mask = rx_mask; + rt1308->slots = slots; + /* slot_width is not used since it's irrelevant for SoundWire */ + + return 0; +} + +static int rt1308_sdw_hw_params(struct snd_pcm_substream *substream, + struct snd_pcm_hw_params *params, struct snd_soc_dai *dai) +{ + struct snd_soc_component *component = dai->component; + struct rt1308_sdw_priv *rt1308 = + snd_soc_component_get_drvdata(component); + struct sdw_stream_config stream_config = {0}; + struct sdw_port_config port_config = {0}; + struct sdw_stream_data *stream; + int retval; + + dev_dbg(dai->dev, "%s %s", __func__, dai->name); + stream = snd_soc_dai_get_dma_data(dai, substream); + + if (!stream) + return -EINVAL; + + if (!rt1308->sdw_slave) + return -EINVAL; + + /* SoundWire specific configuration */ + snd_sdw_params_to_config(substream, params, &stream_config, &port_config); + + /* port 1 for playback */ + if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) + port_config.num = 1; + else + return -EINVAL; + + if (rt1308->slots) { + stream_config.ch_count = rt1308->slots; + port_config.ch_mask = rt1308->rx_mask; + } + + retval = sdw_stream_add_slave(rt1308->sdw_slave, &stream_config, + &port_config, 1, stream->sdw_stream); + if (retval) { + dev_err(dai->dev, "Unable to configure port\n"); + return retval; + } + + return retval; +} + +static int rt1308_sdw_pcm_hw_free(struct snd_pcm_substream *substream, + struct snd_soc_dai *dai) +{ + struct snd_soc_component *component = dai->component; + struct rt1308_sdw_priv *rt1308 = + snd_soc_component_get_drvdata(component); + struct sdw_stream_data *stream = + snd_soc_dai_get_dma_data(dai, substream); + + if (!rt1308->sdw_slave) + return -EINVAL; + + sdw_stream_remove_slave(rt1308->sdw_slave, stream->sdw_stream); + return 0; +} + +/* + * slave_ops: callbacks for get_clock_stop_mode, clock_stop and + * port_prep are not defined for now + */ +static const struct sdw_slave_ops rt1308_slave_ops = { + .read_prop = rt1308_read_prop, + .interrupt_callback = rt1308_interrupt_callback, + .update_status = rt1308_update_status, + .bus_config = rt1308_bus_config, +}; + +static int rt1308_sdw_parse_dt(struct rt1308_sdw_priv *rt1308, struct device *dev) +{ + int ret = 0; + + device_property_read_u32(dev, "realtek,bq-params-cnt", &rt1308->bq_params_cnt); + if (rt1308->bq_params_cnt) { + rt1308->bq_params = devm_kzalloc(dev, rt1308->bq_params_cnt, GFP_KERNEL); + if (!rt1308->bq_params) { + dev_err(dev, "Could not allocate bq_params memory\n"); + ret = -ENOMEM; + } else { + ret = device_property_read_u8_array(dev, "realtek,bq-params", rt1308->bq_params, rt1308->bq_params_cnt); + if (ret < 0) + dev_err(dev, "Could not read list of realtek,bq-params\n"); + } + } + + dev_dbg(dev, "bq_params_cnt=%d\n", rt1308->bq_params_cnt); + return ret; +} + +static int rt1308_sdw_component_probe(struct snd_soc_component *component) +{ + struct rt1308_sdw_priv *rt1308 = snd_soc_component_get_drvdata(component); + int ret; + + rt1308->component = component; + rt1308_sdw_parse_dt(rt1308, &rt1308->sdw_slave->dev); + + ret = pm_runtime_resume(component->dev); + if (ret < 0 && ret != -EACCES) + return ret; + + /* apply BQ params */ + rt1308_apply_bq_params(rt1308); + + return 0; +} + +static const struct snd_soc_component_driver soc_component_sdw_rt1308 = { + .probe = rt1308_sdw_component_probe, + .controls = rt1308_snd_controls, + .num_controls = ARRAY_SIZE(rt1308_snd_controls), + .dapm_widgets = rt1308_dapm_widgets, + .num_dapm_widgets = ARRAY_SIZE(rt1308_dapm_widgets), + .dapm_routes = rt1308_dapm_routes, + .num_dapm_routes = ARRAY_SIZE(rt1308_dapm_routes), + .endianness = 1, +}; + +static const struct snd_soc_dai_ops rt1308_aif_dai_ops = { + .hw_params = rt1308_sdw_hw_params, + .hw_free = rt1308_sdw_pcm_hw_free, + .set_stream = rt1308_set_sdw_stream, + .shutdown = rt1308_sdw_shutdown, + .set_tdm_slot = rt1308_sdw_set_tdm_slot, +}; + +#define RT1308_STEREO_RATES SNDRV_PCM_RATE_48000 +#define RT1308_FORMATS (SNDRV_PCM_FMTBIT_S8 | \ + SNDRV_PCM_FMTBIT_S20_3LE | SNDRV_PCM_FMTBIT_S16_LE | \ + SNDRV_PCM_FMTBIT_S24_LE) + +static struct snd_soc_dai_driver rt1308_sdw_dai[] = { + { + .name = "rt1308-aif", + .playback = { + .stream_name = "DP1 Playback", + .channels_min = 1, + .channels_max = 2, + .rates = RT1308_STEREO_RATES, + .formats = RT1308_FORMATS, + }, + .ops = &rt1308_aif_dai_ops, + }, +}; + +static int rt1308_sdw_init(struct device *dev, struct regmap *regmap, + struct sdw_slave *slave) +{ + struct rt1308_sdw_priv *rt1308; + int ret; + + rt1308 = devm_kzalloc(dev, sizeof(*rt1308), GFP_KERNEL); + if (!rt1308) + return -ENOMEM; + + dev_set_drvdata(dev, rt1308); + rt1308->sdw_slave = slave; + rt1308->regmap = regmap; + + /* + * Mark hw_init to false + * HW init will be performed when device reports present + */ + rt1308->hw_init = false; + rt1308->first_hw_init = false; + + ret = devm_snd_soc_register_component(dev, + &soc_component_sdw_rt1308, + rt1308_sdw_dai, + ARRAY_SIZE(rt1308_sdw_dai)); + + dev_dbg(&slave->dev, "%s\n", __func__); + + return ret; +} + +static int rt1308_sdw_probe(struct sdw_slave *slave, + const struct sdw_device_id *id) +{ + struct regmap *regmap; + + /* Regmap Initialization */ + regmap = devm_regmap_init_sdw(slave, &rt1308_sdw_regmap); + if (IS_ERR(regmap)) + return PTR_ERR(regmap); + + rt1308_sdw_init(&slave->dev, regmap, slave); + + return 0; +} + +static int rt1308_sdw_remove(struct sdw_slave *slave) +{ + struct rt1308_sdw_priv *rt1308 = dev_get_drvdata(&slave->dev); + + if (rt1308->first_hw_init) + pm_runtime_disable(&slave->dev); + + return 0; +} + +static const struct sdw_device_id rt1308_id[] = { + SDW_SLAVE_ENTRY_EXT(0x025d, 0x1308, 0x2, 0, 0), + {}, +}; +MODULE_DEVICE_TABLE(sdw, rt1308_id); + +static int __maybe_unused rt1308_dev_suspend(struct device *dev) +{ + struct rt1308_sdw_priv *rt1308 = dev_get_drvdata(dev); + + if (!rt1308->hw_init) + return 0; + + regcache_cache_only(rt1308->regmap, true); + + return 0; +} + +#define RT1308_PROBE_TIMEOUT 5000 + +static int __maybe_unused rt1308_dev_resume(struct device *dev) +{ + struct sdw_slave *slave = dev_to_sdw_dev(dev); + struct rt1308_sdw_priv *rt1308 = dev_get_drvdata(dev); + unsigned long time; + + if (!rt1308->first_hw_init) + return 0; + + if (!slave->unattach_request) + goto regmap_sync; + + time = wait_for_completion_timeout(&slave->initialization_complete, + msecs_to_jiffies(RT1308_PROBE_TIMEOUT)); + if (!time) { + dev_err(&slave->dev, "Initialization not complete, timed out\n"); + sdw_show_ping_status(slave->bus, true); + + return -ETIMEDOUT; + } + +regmap_sync: + slave->unattach_request = 0; + regcache_cache_only(rt1308->regmap, false); + regcache_sync_region(rt1308->regmap, 0xc000, 0xcfff); + + return 0; +} + +static const struct dev_pm_ops rt1308_pm = { + SET_SYSTEM_SLEEP_PM_OPS(rt1308_dev_suspend, rt1308_dev_resume) + SET_RUNTIME_PM_OPS(rt1308_dev_suspend, rt1308_dev_resume, NULL) +}; + +static struct sdw_driver rt1308_sdw_driver = { + .driver = { + .name = "rt1308", + .owner = THIS_MODULE, + .pm = &rt1308_pm, + }, + .probe = rt1308_sdw_probe, + .remove = rt1308_sdw_remove, + .ops = &rt1308_slave_ops, + .id_table = rt1308_id, +}; +module_sdw_driver(rt1308_sdw_driver); + +MODULE_DESCRIPTION("ASoC RT1308 driver SDW"); +MODULE_AUTHOR("Shuming Fan "); +MODULE_LICENSE("GPL v2"); -- cgit v1.2.3