From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- sound/soc/codecs/rt5682-i2c.c | 344 ++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 344 insertions(+) create mode 100644 sound/soc/codecs/rt5682-i2c.c (limited to 'sound/soc/codecs/rt5682-i2c.c') diff --git a/sound/soc/codecs/rt5682-i2c.c b/sound/soc/codecs/rt5682-i2c.c new file mode 100644 index 000000000..2935c1bb8 --- /dev/null +++ b/sound/soc/codecs/rt5682-i2c.c @@ -0,0 +1,344 @@ +// SPDX-License-Identifier: GPL-2.0-only +// +// rt5682.c -- RT5682 ALSA SoC audio component driver +// +// Copyright 2018 Realtek Semiconductor Corp. +// Author: Bard Liao +// + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include "rl6231.h" +#include "rt5682.h" + +static const struct rt5682_platform_data i2s_default_platform_data = { + .dmic1_data_pin = RT5682_DMIC1_DATA_GPIO2, + .dmic1_clk_pin = RT5682_DMIC1_CLK_GPIO3, + .jd_src = RT5682_JD1, + .btndet_delay = 16, + .dai_clk_names[RT5682_DAI_WCLK_IDX] = "rt5682-dai-wclk", + .dai_clk_names[RT5682_DAI_BCLK_IDX] = "rt5682-dai-bclk", +}; + +static const struct regmap_config rt5682_regmap = { + .reg_bits = 16, + .val_bits = 16, + .max_register = RT5682_I2C_MODE, + .volatile_reg = rt5682_volatile_register, + .readable_reg = rt5682_readable_register, + .cache_type = REGCACHE_RBTREE, + .reg_defaults = rt5682_reg, + .num_reg_defaults = RT5682_REG_NUM, + .use_single_read = true, + .use_single_write = true, +}; + +static void rt5682_jd_check_handler(struct work_struct *work) +{ + struct rt5682_priv *rt5682 = container_of(work, struct rt5682_priv, + jd_check_work.work); + + if (snd_soc_component_read(rt5682->component, RT5682_AJD1_CTRL) & RT5682_JDH_RS_MASK) + /* jack out */ + mod_delayed_work(system_power_efficient_wq, + &rt5682->jack_detect_work, 0); + else + schedule_delayed_work(&rt5682->jd_check_work, 500); +} + +static irqreturn_t rt5682_irq(int irq, void *data) +{ + struct rt5682_priv *rt5682 = data; + + mod_delayed_work(system_power_efficient_wq, + &rt5682->jack_detect_work, msecs_to_jiffies(rt5682->irq_work_delay_time)); + + return IRQ_HANDLED; +} + +static struct snd_soc_dai_driver rt5682_dai[] = { + { + .name = "rt5682-aif1", + .id = RT5682_AIF1, + .playback = { + .stream_name = "AIF1 Playback", + .channels_min = 1, + .channels_max = 2, + .rates = RT5682_STEREO_RATES, + .formats = RT5682_FORMATS, + }, + .capture = { + .stream_name = "AIF1 Capture", + .channels_min = 1, + .channels_max = 2, + .rates = RT5682_STEREO_RATES, + .formats = RT5682_FORMATS, + }, + .ops = &rt5682_aif1_dai_ops, + }, + { + .name = "rt5682-aif2", + .id = RT5682_AIF2, + .capture = { + .stream_name = "AIF2 Capture", + .channels_min = 1, + .channels_max = 2, + .rates = RT5682_STEREO_RATES, + .formats = RT5682_FORMATS, + }, + .ops = &rt5682_aif2_dai_ops, + }, +}; + +static void rt5682_i2c_disable_regulators(void *data) +{ + struct rt5682_priv *rt5682 = data; + + regulator_bulk_disable(ARRAY_SIZE(rt5682->supplies), rt5682->supplies); +} + +static int rt5682_i2c_probe(struct i2c_client *i2c) +{ + struct rt5682_platform_data *pdata = dev_get_platdata(&i2c->dev); + struct rt5682_priv *rt5682; + int i, ret; + unsigned int val; + + rt5682 = devm_kzalloc(&i2c->dev, sizeof(struct rt5682_priv), + GFP_KERNEL); + if (!rt5682) + return -ENOMEM; + + i2c_set_clientdata(i2c, rt5682); + + rt5682->i2c_dev = &i2c->dev; + + rt5682->pdata = i2s_default_platform_data; + + if (pdata) + rt5682->pdata = *pdata; + else + rt5682_parse_dt(rt5682, &i2c->dev); + + rt5682->regmap = devm_regmap_init_i2c(i2c, &rt5682_regmap); + if (IS_ERR(rt5682->regmap)) { + ret = PTR_ERR(rt5682->regmap); + dev_err(&i2c->dev, "Failed to allocate register map: %d\n", + ret); + return ret; + } + + for (i = 0; i < ARRAY_SIZE(rt5682->supplies); i++) + rt5682->supplies[i].supply = rt5682_supply_names[i]; + + ret = devm_regulator_bulk_get(&i2c->dev, ARRAY_SIZE(rt5682->supplies), + rt5682->supplies); + if (ret) { + dev_err(&i2c->dev, "Failed to request supplies: %d\n", ret); + return ret; + } + + ret = devm_add_action_or_reset(&i2c->dev, rt5682_i2c_disable_regulators, + rt5682); + if (ret) + return ret; + + ret = regulator_bulk_enable(ARRAY_SIZE(rt5682->supplies), + rt5682->supplies); + if (ret) { + dev_err(&i2c->dev, "Failed to enable supplies: %d\n", ret); + return ret; + } + + if (gpio_is_valid(rt5682->pdata.ldo1_en)) { + if (devm_gpio_request_one(&i2c->dev, rt5682->pdata.ldo1_en, + GPIOF_OUT_INIT_HIGH, "rt5682")) + dev_err(&i2c->dev, "Fail gpio_request gpio_ldo\n"); + } + + /* Sleep for 300 ms miniumum */ + usleep_range(300000, 350000); + + regmap_write(rt5682->regmap, RT5682_I2C_MODE, 0x1); + usleep_range(10000, 15000); + + regmap_read(rt5682->regmap, RT5682_DEVICE_ID, &val); + if (val != DEVICE_ID) { + dev_err(&i2c->dev, + "Device with ID register %x is not rt5682\n", val); + return -ENODEV; + } + + mutex_init(&rt5682->calibrate_mutex); + rt5682_calibrate(rt5682); + + rt5682_apply_patch_list(rt5682, &i2c->dev); + + regmap_write(rt5682->regmap, RT5682_DEPOP_1, 0x0000); + + /* DMIC pin*/ + if (rt5682->pdata.dmic1_data_pin != RT5682_DMIC1_NULL) { + switch (rt5682->pdata.dmic1_data_pin) { + case RT5682_DMIC1_DATA_GPIO2: /* share with LRCK2 */ + regmap_update_bits(rt5682->regmap, RT5682_DMIC_CTRL_1, + RT5682_DMIC_1_DP_MASK, RT5682_DMIC_1_DP_GPIO2); + regmap_update_bits(rt5682->regmap, RT5682_GPIO_CTRL_1, + RT5682_GP2_PIN_MASK, RT5682_GP2_PIN_DMIC_SDA); + break; + + case RT5682_DMIC1_DATA_GPIO5: /* share with DACDAT1 */ + regmap_update_bits(rt5682->regmap, RT5682_DMIC_CTRL_1, + RT5682_DMIC_1_DP_MASK, RT5682_DMIC_1_DP_GPIO5); + regmap_update_bits(rt5682->regmap, RT5682_GPIO_CTRL_1, + RT5682_GP5_PIN_MASK, RT5682_GP5_PIN_DMIC_SDA); + break; + + default: + dev_warn(&i2c->dev, "invalid DMIC_DAT pin\n"); + break; + } + + switch (rt5682->pdata.dmic1_clk_pin) { + case RT5682_DMIC1_CLK_GPIO1: /* share with IRQ */ + regmap_update_bits(rt5682->regmap, RT5682_GPIO_CTRL_1, + RT5682_GP1_PIN_MASK, RT5682_GP1_PIN_DMIC_CLK); + break; + + case RT5682_DMIC1_CLK_GPIO3: /* share with BCLK2 */ + regmap_update_bits(rt5682->regmap, RT5682_GPIO_CTRL_1, + RT5682_GP3_PIN_MASK, RT5682_GP3_PIN_DMIC_CLK); + if (rt5682->pdata.dmic_clk_driving_high) + regmap_update_bits(rt5682->regmap, + RT5682_PAD_DRIVING_CTRL, + RT5682_PAD_DRV_GP3_MASK, + 2 << RT5682_PAD_DRV_GP3_SFT); + break; + + default: + dev_warn(&i2c->dev, "invalid DMIC_CLK pin\n"); + break; + } + } + + regmap_update_bits(rt5682->regmap, RT5682_PWR_ANLG_1, + RT5682_LDO1_DVO_MASK | RT5682_HP_DRIVER_MASK, + RT5682_LDO1_DVO_12 | RT5682_HP_DRIVER_5X); + regmap_write(rt5682->regmap, RT5682_MICBIAS_2, 0x0080); + regmap_update_bits(rt5682->regmap, RT5682_GPIO_CTRL_1, + RT5682_GP4_PIN_MASK | RT5682_GP5_PIN_MASK, + RT5682_GP4_PIN_ADCDAT1 | RT5682_GP5_PIN_DACDAT1); + regmap_write(rt5682->regmap, RT5682_TEST_MODE_CTRL_1, 0x0000); + regmap_update_bits(rt5682->regmap, RT5682_BIAS_CUR_CTRL_8, + RT5682_HPA_CP_BIAS_CTRL_MASK, RT5682_HPA_CP_BIAS_3UA); + regmap_update_bits(rt5682->regmap, RT5682_CHARGE_PUMP_1, + RT5682_CP_CLK_HP_MASK, RT5682_CP_CLK_HP_300KHZ); + regmap_update_bits(rt5682->regmap, RT5682_HP_CHARGE_PUMP_1, + RT5682_PM_HP_MASK, RT5682_PM_HP_HV); + regmap_update_bits(rt5682->regmap, RT5682_DMIC_CTRL_1, + RT5682_FIFO_CLK_DIV_MASK, RT5682_FIFO_CLK_DIV_2); + + INIT_DELAYED_WORK(&rt5682->jack_detect_work, + rt5682_jack_detect_handler); + INIT_DELAYED_WORK(&rt5682->jd_check_work, + rt5682_jd_check_handler); + + if (i2c->irq) { + ret = devm_request_threaded_irq(&i2c->dev, i2c->irq, NULL, + rt5682_irq, IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING + | IRQF_ONESHOT, "rt5682", rt5682); + if (ret) + dev_err(&i2c->dev, "Failed to reguest IRQ: %d\n", ret); + } + +#ifdef CONFIG_COMMON_CLK + /* Check if MCLK provided */ + rt5682->mclk = devm_clk_get_optional(&i2c->dev, "mclk"); + if (IS_ERR(rt5682->mclk)) + return PTR_ERR(rt5682->mclk); + + /* Register CCF DAI clock control */ + ret = rt5682_register_dai_clks(rt5682); + if (ret) + return ret; + + /* Initial setup for CCF */ + rt5682->lrck[RT5682_AIF1] = 48000; +#endif + + return devm_snd_soc_register_component(&i2c->dev, + &rt5682_soc_component_dev, + rt5682_dai, ARRAY_SIZE(rt5682_dai)); +} + +static void rt5682_i2c_shutdown(struct i2c_client *client) +{ + struct rt5682_priv *rt5682 = i2c_get_clientdata(client); + + disable_irq(client->irq); + cancel_delayed_work_sync(&rt5682->jack_detect_work); + cancel_delayed_work_sync(&rt5682->jd_check_work); + + rt5682_reset(rt5682); +} + +static void rt5682_i2c_remove(struct i2c_client *client) +{ + rt5682_i2c_shutdown(client); +} + +static const struct of_device_id rt5682_of_match[] = { + {.compatible = "realtek,rt5682i"}, + {}, +}; +MODULE_DEVICE_TABLE(of, rt5682_of_match); + +static const struct acpi_device_id rt5682_acpi_match[] = { + {"10EC5682", 0,}, + {}, +}; +MODULE_DEVICE_TABLE(acpi, rt5682_acpi_match); + +static const struct i2c_device_id rt5682_i2c_id[] = { + {"rt5682", 0}, + {} +}; +MODULE_DEVICE_TABLE(i2c, rt5682_i2c_id); + +static struct i2c_driver rt5682_i2c_driver = { + .driver = { + .name = "rt5682", + .of_match_table = rt5682_of_match, + .acpi_match_table = rt5682_acpi_match, + .probe_type = PROBE_PREFER_ASYNCHRONOUS, + }, + .probe_new = rt5682_i2c_probe, + .remove = rt5682_i2c_remove, + .shutdown = rt5682_i2c_shutdown, + .id_table = rt5682_i2c_id, +}; +module_i2c_driver(rt5682_i2c_driver); + +MODULE_DESCRIPTION("ASoC RT5682 driver"); +MODULE_AUTHOR("Bard Liao "); +MODULE_LICENSE("GPL v2"); -- cgit v1.2.3