From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- sound/soc/fsl/Kconfig | 373 ++++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 373 insertions(+) create mode 100644 sound/soc/fsl/Kconfig (limited to 'sound/soc/fsl/Kconfig') diff --git a/sound/soc/fsl/Kconfig b/sound/soc/fsl/Kconfig new file mode 100644 index 000000000..614eceda6 --- /dev/null +++ b/sound/soc/fsl/Kconfig @@ -0,0 +1,373 @@ +# SPDX-License-Identifier: GPL-2.0-only +menu "SoC Audio for Freescale CPUs" + +comment "Common SoC Audio options for Freescale CPUs:" + +config SND_SOC_FSL_ASRC + tristate "Asynchronous Sample Rate Converter (ASRC) module support" + depends on HAS_DMA + select REGMAP_MMIO + select SND_SOC_GENERIC_DMAENGINE_PCM + help + Say Y if you want to add Asynchronous Sample Rate Converter (ASRC) + support for the Freescale CPUs. + This option is only useful for out-of-tree drivers since + in-tree drivers select it automatically. + +config SND_SOC_FSL_SAI + tristate "Synchronous Audio Interface (SAI) module support" + select REGMAP_MMIO + select SND_SOC_IMX_PCM_DMA if SND_IMX_SOC != n + select SND_SOC_GENERIC_DMAENGINE_PCM + select SND_SOC_FSL_UTILS + help + Say Y if you want to add Synchronous Audio Interface (SAI) + support for the Freescale CPUs. + This option is only useful for out-of-tree drivers since + in-tree drivers select it automatically. + +config SND_SOC_FSL_MQS + tristate "Medium Quality Sound (MQS) module support" + depends on SND_SOC_FSL_SAI + select REGMAP_MMIO + help + Say Y if you want to add Medium Quality Sound (MQS) + support for the Freescale CPUs. + This option is only useful for out-of-tree drivers since + in-tree drivers select it automatically. + +config SND_SOC_FSL_AUDMIX + tristate "Audio Mixer (AUDMIX) module support" + select REGMAP_MMIO + help + Say Y if you want to add Audio Mixer (AUDMIX) + support for the NXP iMX CPUs. + +config SND_SOC_FSL_SSI + tristate "Synchronous Serial Interface module (SSI) support" + select SND_SOC_IMX_PCM_DMA if SND_IMX_SOC != n + select SND_SOC_IMX_PCM_FIQ if SND_IMX_SOC != n && (MXC_TZIC || MXC_AVIC) + select REGMAP_MMIO + help + Say Y if you want to add Synchronous Serial Interface (SSI) + support for the Freescale CPUs. + This option is only useful for out-of-tree drivers since + in-tree drivers select it automatically. + +config SND_SOC_FSL_SPDIF + tristate "Sony/Philips Digital Interface (S/PDIF) module support" + select REGMAP_MMIO + select SND_SOC_IMX_PCM_DMA if SND_IMX_SOC != n + select SND_SOC_IMX_PCM_FIQ if SND_IMX_SOC != n && (MXC_TZIC || MXC_AVIC) + select BITREVERSE + select SND_SOC_FSL_UTILS + help + Say Y if you want to add Sony/Philips Digital Interface (SPDIF) + support for the Freescale CPUs. + This option is only useful for out-of-tree drivers since + in-tree drivers select it automatically. + +config SND_SOC_FSL_ESAI + tristate "Enhanced Serial Audio Interface (ESAI) module support" + select REGMAP_MMIO + select SND_SOC_IMX_PCM_DMA if SND_IMX_SOC != n + help + Say Y if you want to add Enhanced Synchronous Audio Interface + (ESAI) support for the Freescale CPUs. + This option is only useful for out-of-tree drivers since + in-tree drivers select it automatically. + +config SND_SOC_FSL_MICFIL + tristate "Pulse Density Modulation Microphone Interface (MICFIL) module support" + select REGMAP_MMIO + select SND_SOC_IMX_PCM_DMA if SND_IMX_SOC != n + select SND_SOC_GENERIC_DMAENGINE_PCM + select SND_SOC_FSL_UTILS + help + Say Y if you want to add Pulse Density Modulation microphone + interface (MICFIL) support for NXP. + +config SND_SOC_FSL_EASRC + tristate "Enhanced Asynchronous Sample Rate Converter (EASRC) module support" + depends on SND_SOC_FSL_ASRC + select REGMAP_MMIO + select SND_SOC_GENERIC_DMAENGINE_PCM + help + Say Y if you want to add Enhanced ASRC support for NXP. The ASRC is + a digital module that converts audio from a source sample rate to a + destination sample rate. It is a new design module compare with the + old ASRC. + +config SND_SOC_FSL_XCVR + tristate "NXP Audio Transceiver (XCVR) module support" + select REGMAP_MMIO + select SND_SOC_IMX_PCM_DMA if SND_IMX_SOC != n + select SND_SOC_GENERIC_DMAENGINE_PCM + help + Say Y if you want to add Audio Transceiver (XCVR) support for NXP + iMX CPUs. XCVR is a digital module that supports HDMI2.1 eARC, + HDMI1.4 ARC and SPDIF. + +config SND_SOC_FSL_AUD2HTX + tristate "AUDIO TO HDMI TX module support" + depends on ARCH_MXC || COMPILE_TEST + select SND_SOC_IMX_PCM_DMA if SND_IMX_SOC != n + help + Say Y if you want to add AUDIO TO HDMI TX support for NXP. + +config SND_SOC_FSL_UTILS + tristate + +config SND_SOC_FSL_RPMSG + tristate "NXP Audio Base On RPMSG support" + depends on COMMON_CLK + depends on RPMSG + depends on SND_IMX_SOC || SND_IMX_SOC = n + select SND_SOC_IMX_RPMSG if SND_IMX_SOC != n + help + Say Y if you want to add rpmsg audio support for the Freescale CPUs. + This option is only useful for out-of-tree drivers since + in-tree drivers select it automatically. + +config SND_SOC_IMX_PCM_DMA + tristate + select SND_SOC_GENERIC_DMAENGINE_PCM + +config SND_SOC_IMX_AUDIO_RPMSG + tristate + depends on RPMSG + +config SND_SOC_IMX_PCM_RPMSG + tristate + depends on SND_SOC_IMX_AUDIO_RPMSG + select SND_SOC_GENERIC_DMAENGINE_PCM + +config SND_SOC_IMX_AUDMUX + tristate "Digital Audio Mux module support" + help + Say Y if you want to add Digital Audio Mux (AUDMUX) support + for the ARM i.MX CPUs. + This option is only useful for out-of-tree drivers since + in-tree drivers select it automatically. + +config SND_POWERPC_SOC + tristate "SoC Audio for Freescale PowerPC CPUs" + depends on FSL_SOC || PPC_MPC52xx + help + Say Y or M if you want to add support for codecs attached to + the PowerPC CPUs. + +config SND_IMX_SOC + tristate "SoC Audio for Freescale i.MX CPUs" + depends on ARCH_MXC || COMPILE_TEST + help + Say Y or M if you want to add support for codecs attached to + the i.MX CPUs. + +if SND_POWERPC_SOC + +config SND_MPC52xx_DMA + tristate + +config SND_SOC_POWERPC_DMA + tristate + +comment "SoC Audio support for Freescale PPC boards:" + +config SND_SOC_MPC8610_HPCD + tristate "ALSA SoC support for the Freescale MPC8610 HPCD board" + # I2C is necessary for the CS4270 driver + depends on MPC8610_HPCD && I2C + select SND_SOC_FSL_SSI + select SND_SOC_FSL_UTILS + select SND_SOC_POWERPC_DMA + select SND_SOC_CS4270 + select SND_SOC_CS4270_VD33_ERRATA + default y if MPC8610_HPCD + help + Say Y if you want to enable audio on the Freescale MPC8610 HPCD. + +config SND_SOC_P1022_DS + tristate "ALSA SoC support for the Freescale P1022 DS board" + # I2C is necessary for the WM8776 driver + depends on P1022_DS && I2C + select SND_SOC_FSL_SSI + select SND_SOC_FSL_UTILS + select SND_SOC_POWERPC_DMA + select SND_SOC_WM8776 + default y if P1022_DS + help + Say Y if you want to enable audio on the Freescale P1022 DS board. + This will also include the Wolfson Microelectronics WM8776 codec + driver. + +config SND_SOC_P1022_RDK + tristate "ALSA SoC support for the Freescale / iVeia P1022 RDK board" + # I2C is necessary for the WM8960 driver + depends on P1022_RDK && I2C + select SND_SOC_FSL_SSI + select SND_SOC_FSL_UTILS + select SND_SOC_POWERPC_DMA + select SND_SOC_WM8960 + default y if P1022_RDK + help + Say Y if you want to enable audio on the Freescale / iVeia + P1022 RDK board. This will also include the Wolfson + Microelectronics WM8960 codec driver. + +config SND_SOC_MPC5200_I2S + tristate "Freescale MPC5200 PSC in I2S mode driver" + depends on PPC_MPC52xx && PPC_BESTCOMM + select SND_MPC52xx_DMA + select PPC_BESTCOMM_GEN_BD + help + Say Y here to support the MPC5200 PSCs in I2S mode. + +config SND_SOC_MPC5200_AC97 + tristate "Freescale MPC5200 PSC in AC97 mode driver" + depends on PPC_MPC52xx && PPC_BESTCOMM + select SND_SOC_AC97_BUS + select SND_MPC52xx_DMA + select PPC_BESTCOMM_GEN_BD + help + Say Y here to support the MPC5200 PSCs in AC97 mode. + +config SND_MPC52xx_SOC_PCM030 + tristate "SoC AC97 Audio support for Phytec pcm030 and WM9712" + depends on PPC_MPC5200_SIMPLE + select SND_SOC_MPC5200_AC97 + select SND_SOC_WM9712 + help + Say Y if you want to add support for sound on the Phytec pcm030 + baseboard. + +config SND_MPC52xx_SOC_EFIKA + tristate "SoC AC97 Audio support for bbplan Efika and STAC9766" + depends on PPC_EFIKA + select SND_SOC_MPC5200_AC97 + select SND_SOC_STAC9766 + help + Say Y if you want to add support for sound on the Efika. + +endif # SND_POWERPC_SOC + +config SND_SOC_IMX_PCM_FIQ + tristate + default y if (SND_SOC_FSL_SSI=m || SND_SOC_FSL_SPDIF=m) && (MXC_TZIC || MXC_AVIC) + select FIQ + +if SND_IMX_SOC + +comment "SoC Audio support for Freescale i.MX boards:" + +config SND_SOC_EUKREA_TLV320 + tristate "Eukrea TLV320" + depends on ARCH_MXC && !ARM64 && I2C + select SND_SOC_TLV320AIC23_I2C + select SND_SOC_IMX_AUDMUX + select SND_SOC_FSL_SSI + select SND_SOC_IMX_PCM_DMA + help + Enable I2S based access to the TLV320AIC23B codec attached + to the SSI interface + +config SND_SOC_IMX_ES8328 + tristate "SoC Audio support for i.MX boards with the ES8328 codec" + depends on OF && (I2C || SPI) + select SND_SOC_ES8328_I2C if I2C + select SND_SOC_ES8328_SPI if SPI_MASTER + select SND_SOC_IMX_PCM_DMA + select SND_SOC_IMX_AUDMUX + select SND_SOC_FSL_SSI + help + Say Y if you want to add support for the ES8328 audio codec connected + via SSI/I2S over either SPI or I2C. + +config SND_SOC_IMX_SGTL5000 + tristate "SoC Audio support for i.MX boards with sgtl5000" + depends on OF && I2C + select SND_SOC_SGTL5000 + select SND_SOC_IMX_PCM_DMA + select SND_SOC_IMX_AUDMUX + select SND_SOC_FSL_SSI + help + Say Y if you want to add support for SoC audio on an i.MX board with + a sgtl5000 codec. + +config SND_SOC_IMX_SPDIF + tristate "SoC Audio support for i.MX boards with S/PDIF" + select SND_SOC_IMX_PCM_DMA + select SND_SOC_FSL_SPDIF + help + SoC Audio support for i.MX boards with S/PDIF + Say Y if you want to add support for SoC audio on an i.MX board with + a S/DPDIF. + +config SND_SOC_FSL_ASOC_CARD + tristate "Generic ASoC Sound Card with ASRC support" + depends on OF && I2C + # enforce SND_SOC_FSL_ASOC_CARD=m if SND_AC97_CODEC=m: + depends on SND_AC97_CODEC || SND_AC97_CODEC=n + select SND_SIMPLE_CARD_UTILS + select SND_SOC_IMX_AUDMUX + select SND_SOC_IMX_PCM_DMA + select SND_SOC_FSL_ESAI + select SND_SOC_FSL_SAI + select SND_SOC_FSL_SSI + select SND_SOC_TLV320AIC31XX + select SND_SOC_WM8994 + select MFD_WM8994 + help + ALSA SoC Audio support with ASRC feature for Freescale SoCs that have + ESAI/SAI/SSI and connect with external CODECs such as WM8962, CS42888, + CS4271, CS4272, SGTL5000 and TLV320AIC32x4. + Say Y if you want to add support for Freescale Generic ASoC Sound Card. + +config SND_SOC_IMX_AUDMIX + tristate "SoC Audio support for i.MX boards with AUDMIX" + select SND_SOC_FSL_AUDMIX + select SND_SOC_FSL_SAI + help + SoC Audio support for i.MX boards with Audio Mixer + Say Y if you want to add support for SoC audio on an i.MX board with + an Audio Mixer. + +config SND_SOC_IMX_HDMI + tristate "SoC Audio support for i.MX boards with HDMI port" + select SND_SOC_FSL_SAI + select SND_SOC_FSL_AUD2HTX + select SND_SOC_HDMI_CODEC + help + ALSA SoC Audio support with HDMI feature for Freescale SoCs that have + SAI/AUD2HTX and connect with internal HDMI IP or external module + SII902X. + Say Y if you want to add support for SoC audio on an i.MX board with + IMX HDMI. + +config SND_SOC_IMX_RPMSG + tristate "SoC Audio support for i.MX boards with rpmsg" + depends on RPMSG + select SND_SOC_IMX_PCM_RPMSG + select SND_SOC_IMX_AUDIO_RPMSG + help + SoC Audio support for i.MX boards with rpmsg. + There should be rpmsg devices defined in other core (M core) + Say Y if you want to add support for SoC audio on an i.MX board with + a rpmsg devices. + +config SND_SOC_IMX_CARD + tristate "SoC Audio Graph Sound Card support for i.MX boards" + depends on OF && I2C + select SND_SOC_AK4458 + select SND_SOC_AK5558 + select SND_SOC_IMX_PCM_DMA + select SND_SOC_FSL_SAI + select SND_SIMPLE_CARD_UTILS + help + This option enables audio sound card support for i.MX boards + with OF-graph DT bindings. + It also support DPCM of single CPU multi Codec ststem. + +endif # SND_IMX_SOC + +endmenu -- cgit v1.2.3