From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- sound/soc/intel/boards/Kconfig | 688 +++++++++++++++++++++++++++++++++++++++++ 1 file changed, 688 insertions(+) create mode 100644 sound/soc/intel/boards/Kconfig (limited to 'sound/soc/intel/boards/Kconfig') diff --git a/sound/soc/intel/boards/Kconfig b/sound/soc/intel/boards/Kconfig new file mode 100644 index 000000000..99308ed85 --- /dev/null +++ b/sound/soc/intel/boards/Kconfig @@ -0,0 +1,688 @@ +# SPDX-License-Identifier: GPL-2.0-only +menuconfig SND_SOC_INTEL_MACH + bool "Intel Machine drivers" + depends on SND_SOC_INTEL_SST_TOPLEVEL || SND_SOC_SOF_INTEL_TOPLEVEL + help + Intel ASoC Machine Drivers. If you have a Intel machine that + has an audio controller with a DSP and I2S or DMIC port, then + enable this option by saying Y + + Note that the answer to this question doesn't directly affect the + kernel: saying N will just cause the configurator to skip all + the questions about Intel ASoC machine drivers. + +if SND_SOC_INTEL_MACH + +config SND_SOC_INTEL_USER_FRIENDLY_LONG_NAMES + bool "Use more user friendly long card names" + help + Some drivers report the I/O configuration to userspace through the + soundcard's long card name in the control user space AP. An unfortunate + side effect is that this long name may also be used by the GUI, + confusing users with information they don't need. + This option prevents the long name from being modified, and the I/O + configuration will be provided through a different component interface. + Select Y if userspace like UCM (Use Case Manager) uses the component + interface. + If unsure select N. + +config SND_SOC_INTEL_HDA_DSP_COMMON + tristate + +config SND_SOC_INTEL_SOF_MAXIM_COMMON + tristate + +config SND_SOC_INTEL_SOF_REALTEK_COMMON + tristate + +config SND_SOC_INTEL_SOF_CIRRUS_COMMON + tristate + +if SND_SOC_INTEL_CATPT + +config SND_SOC_INTEL_HASWELL_MACH + tristate "Haswell with RT5640 I2S codec" + depends on I2C + depends on I2C_DESIGNWARE_PLATFORM || COMPILE_TEST + depends on X86_INTEL_LPSS || COMPILE_TEST + select SND_SOC_RT5640 + help + This adds support for the Lynxpoint Audio DSP on Intel(R) Haswell + Ultrabook platforms. This is a recommended option. + Say Y or m if you have such a device. + If unsure select "N". + +endif ## SND_SOC_INTEL_CATPT + +if SND_SOC_INTEL_CATPT || SND_SOC_SOF_BROADWELL + +config SND_SOC_INTEL_BDW_RT5650_MACH + tristate "Broadwell with RT5650 codec" + depends on I2C + depends on I2C_DESIGNWARE_PLATFORM || COMPILE_TEST + depends on X86_INTEL_LPSS || COMPILE_TEST + select SND_SOC_RT5645 + help + This adds the ASoC machine driver for Intel Broadwell platforms with + the RT5650 codec. + Say Y if you have such a device. + If unsure select "N". + +config SND_SOC_INTEL_BDW_RT5677_MACH + tristate "Broadwell with RT5677 codec" + depends on I2C + depends on I2C_DESIGNWARE_PLATFORM || COMPILE_TEST + depends on GPIOLIB || COMPILE_TEST + depends on X86_INTEL_LPSS || COMPILE_TEST + depends on SPI_MASTER + select SPI_PXA2XX + select SND_SOC_RT5677_SPI + select SND_SOC_RT5677 + help + This adds support for Intel Broadwell platform based boards with + the RT5677 audio codec. This is a recommended option. + Say Y or m if you have such a device. + If unsure select "N". + +config SND_SOC_INTEL_BROADWELL_MACH + tristate "Broadwell with RT286 I2S codec" + depends on I2C + depends on I2C_DESIGNWARE_PLATFORM || COMPILE_TEST + depends on X86_INTEL_LPSS || COMPILE_TEST + select SND_SOC_RT286 + help + This adds support for the Wilcatpoint Audio DSP on Intel(R) Broadwell + Ultrabook platforms. + Say Y or m if you have such a device. This is a recommended option. + If unsure select "N". +endif ## SND_SOC_INTEL_CATPT || SND_SOC_SOF_BROADWELL + +if SND_SST_ATOM_HIFI2_PLATFORM || SND_SOC_SOF_BAYTRAIL + +config SND_SOC_INTEL_BYTCR_RT5640_MACH + tristate "Baytrail and Baytrail-CR with RT5640 codec" + depends on I2C && ACPI + depends on X86_INTEL_LPSS || COMPILE_TEST + depends on GPIOLIB || COMPILE_TEST + select SND_SOC_ACPI + select SND_SOC_RT5640 + help + This adds support for ASoC machine driver for Intel(R) Baytrail and Baytrail-CR + platforms with RT5640 audio codec. + Say Y or m if you have such a device. This is a recommended option. + If unsure select "N". + +config SND_SOC_INTEL_BYTCR_RT5651_MACH + tristate "Baytrail and Baytrail-CR with RT5651 codec" + depends on I2C && ACPI + depends on X86_INTEL_LPSS || COMPILE_TEST + depends on GPIOLIB || COMPILE_TEST + select SND_SOC_ACPI + select SND_SOC_RT5651 + help + This adds support for ASoC machine driver for Intel(R) Baytrail and Baytrail-CR + platforms with RT5651 audio codec. + Say Y or m if you have such a device. This is a recommended option. + If unsure select "N". + +config SND_SOC_INTEL_BYTCR_WM5102_MACH + tristate "Baytrail and Baytrail-CR with WM5102 codec" + depends on MFD_ARIZONA && MFD_WM5102 && SPI_MASTER && ACPI + depends on X86_INTEL_LPSS || COMPILE_TEST + depends on GPIOLIB || COMPILE_TEST + select SND_SOC_ACPI + select SND_SOC_WM5102 + help + This adds support for ASoC machine driver for Intel(R) Baytrail and Baytrail-CR + platforms with WM5102 audio codec. + Say Y if you have such a device. + If unsure select "N". + +config SND_SOC_INTEL_CHT_BSW_RT5672_MACH + tristate "Cherrytrail & Braswell with RT5672 codec" + depends on I2C && ACPI + depends on X86_INTEL_LPSS || COMPILE_TEST + depends on GPIOLIB || COMPILE_TEST + select SND_SOC_ACPI + select SND_SOC_RT5670 + help + This adds support for ASoC machine driver for Intel(R) Cherrytrail & Braswell + platforms with RT5672 audio codec. + Say Y or m if you have such a device. This is a recommended option. + If unsure select "N". + +config SND_SOC_INTEL_CHT_BSW_RT5645_MACH + tristate "Cherrytrail & Braswell with RT5645/5650 codec" + depends on I2C && ACPI + depends on X86_INTEL_LPSS || COMPILE_TEST + select SND_SOC_ACPI + select SND_SOC_RT5645 + help + This adds support for ASoC machine driver for Intel(R) Cherrytrail & Braswell + platforms with RT5645/5650 audio codec. + Say Y or m if you have such a device. This is a recommended option. + If unsure select "N". + +config SND_SOC_INTEL_CHT_BSW_MAX98090_TI_MACH + tristate "Cherrytrail & Braswell with MAX98090 & TI codec" + depends on I2C && ACPI + depends on X86_INTEL_LPSS || COMPILE_TEST + depends on GPIOLIB || COMPILE_TEST + select SND_SOC_MAX98090 + select SND_SOC_TS3A227E + help + This adds support for ASoC machine driver for Intel(R) Cherrytrail & Braswell + platforms with MAX98090 audio codec it also can support TI jack chip as aux device. + Say Y or m if you have such a device. This is a recommended option. + If unsure select "N". + +config SND_SOC_INTEL_CHT_BSW_NAU8824_MACH + tristate "Cherrytrail & Braswell with NAU88L24 codec" + depends on I2C && ACPI + depends on X86_INTEL_LPSS || COMPILE_TEST + select SND_SOC_ACPI + select SND_SOC_NAU8824 + help + This adds support for ASoC machine driver for Intel(R) Cherrytrail & Braswell + platforms with NAU88L24 audio codec. + Say Y or m if you have such a device. This is a recommended option. + If unsure select "N". + +config SND_SOC_INTEL_BYT_CHT_CX2072X_MACH + tristate "Baytrail & Cherrytrail with CX2072X codec" + depends on I2C && ACPI + depends on X86_INTEL_LPSS || COMPILE_TEST + depends on GPIOLIB || COMPILE_TEST + select SND_SOC_ACPI + select SND_SOC_CX2072X + help + This adds support for ASoC machine driver for Intel(R) Baytrail & + Cherrytrail platforms with Conexant CX2072X audio codec. + Say Y or m if you have such a device. This is a recommended option. + If unsure select "N". + +config SND_SOC_INTEL_BYT_CHT_DA7213_MACH + tristate "Baytrail & Cherrytrail with DA7212/7213 codec" + depends on I2C && ACPI + depends on X86_INTEL_LPSS || COMPILE_TEST + select SND_SOC_ACPI + select SND_SOC_DA7213 + help + This adds support for ASoC machine driver for Intel(R) Baytrail & CherryTrail + platforms with DA7212/7213 audio codec. + Say Y or m if you have such a device. This is a recommended option. + If unsure select "N". + +config SND_SOC_INTEL_BYT_CHT_ES8316_MACH + tristate "Baytrail & Cherrytrail with ES8316 codec" + depends on I2C && ACPI + depends on X86_INTEL_LPSS || COMPILE_TEST + depends on GPIOLIB || COMPILE_TEST + select SND_SOC_ACPI + select SND_SOC_ES8316 + help + This adds support for ASoC machine driver for Intel(R) Baytrail & + Cherrytrail platforms with ES8316 audio codec. + Say Y or m if you have such a device. This is a recommended option. + If unsure select "N". + +endif ## SND_SST_ATOM_HIFI2_PLATFORM || SND_SOC_SOF_BAYTRAIL + +if SND_SST_ATOM_HIFI2_PLATFORM + +config SND_SOC_INTEL_BYT_CHT_NOCODEC_MACH + tristate "Baytrail & Cherrytrail platform with no codec (MinnowBoard MAX, Up)" + depends on I2C && ACPI + depends on X86_INTEL_LPSS || COMPILE_TEST + help + This adds support for ASoC machine driver for the MinnowBoard Max or + Up boards and provides access to I2S signals on the Low-Speed + connector. This is not a recommended option outside of these cases. + It is not intended to be enabled by distros by default. + Say Y or m if you have such a device. + + If unsure select "N". + +endif ## SND_SST_ATOM_HIFI2_PLATFORM + +if SND_SOC_INTEL_SKL + +config SND_SOC_INTEL_SKL_RT286_MACH + tristate "SKL with RT286 I2S mode" + depends on I2C && ACPI + depends on MFD_INTEL_LPSS || COMPILE_TEST + select SND_SOC_RT286 + select SND_SOC_DMIC + select SND_SOC_HDAC_HDMI + help + This adds support for ASoC machine driver for Skylake platforms + with RT286 I2S audio codec. + Say Y or m if you have such a device. + If unsure select "N". + +config SND_SOC_INTEL_SKL_NAU88L25_SSM4567_MACH + tristate "SKL with NAU88L25 and SSM4567 in I2S Mode" + depends on I2C && ACPI + depends on MFD_INTEL_LPSS || COMPILE_TEST + select SND_SOC_NAU8825 + select SND_SOC_SSM4567 + select SND_SOC_DMIC + select SND_SOC_HDAC_HDMI + help + This adds support for ASoC Onboard Codec I2S machine driver. This will + create an alsa sound card for NAU88L25 + SSM4567. + Say Y or m if you have such a device. This is a recommended option. + If unsure select "N". + +config SND_SOC_INTEL_SKL_NAU88L25_MAX98357A_MACH + tristate "SKL with NAU88L25 and MAX98357A in I2S Mode" + depends on I2C && ACPI + depends on MFD_INTEL_LPSS || COMPILE_TEST + select SND_SOC_NAU8825 + select SND_SOC_MAX98357A + select SND_SOC_DMIC + select SND_SOC_HDAC_HDMI + help + This adds support for ASoC Onboard Codec I2S machine driver. This will + create an alsa sound card for NAU88L25 + MAX98357A. + Say Y or m if you have such a device. This is a recommended option. + If unsure select "N". + +endif ## SND_SOC_INTEL_SKL + +config SND_SOC_INTEL_DA7219_MAX98357A_GENERIC + tristate + select SND_SOC_DA7219 + select SND_SOC_MAX98357A + select SND_SOC_MAX98390 + select SND_SOC_DMIC + select SND_SOC_HDAC_HDMI + select SND_SOC_INTEL_HDA_DSP_COMMON + +config SND_SOC_INTEL_BXT_DA7219_MAX98357A_COMMON + tristate + select SND_SOC_INTEL_DA7219_MAX98357A_GENERIC + +if SND_SOC_INTEL_APL + +config SND_SOC_INTEL_BXT_DA7219_MAX98357A_MACH + tristate "Broxton with DA7219 and MAX98357A/MAX98390 in I2S Mode" + depends on I2C && ACPI + depends on MFD_INTEL_LPSS || COMPILE_TEST + depends on SND_HDA_CODEC_HDMI + select SND_SOC_INTEL_BXT_DA7219_MAX98357A_COMMON + help + This adds support for ASoC machine driver for Broxton-P platforms + with DA7219 + MAX98357A/MAX98390 I2S audio codec. + Say Y or m if you have such a device. This is a recommended option. + If unsure select "N". + +config SND_SOC_INTEL_BXT_RT298_MACH + tristate "Broxton with RT298 I2S mode" + depends on I2C && ACPI + depends on MFD_INTEL_LPSS || COMPILE_TEST + select SND_SOC_RT298 + select SND_SOC_DMIC + select SND_SOC_HDAC_HDMI + select SND_SOC_INTEL_HDA_DSP_COMMON + help + This adds support for ASoC machine driver for Broxton platforms + with RT286 I2S audio codec. + Say Y or m if you have such a device. This is a recommended option. + If unsure select "N". + +endif ## SND_SOC_INTEL_APL + +if SND_SOC_SOF_APOLLOLAKE + +config SND_SOC_INTEL_SOF_WM8804_MACH + tristate "SOF with Wolfson/Cirrus WM8804 codec" + depends on I2C && ACPI + depends on MFD_INTEL_LPSS || COMPILE_TEST + depends on GPIOLIB || COMPILE_TEST + select SND_SOC_WM8804_I2C + help + This adds support for ASoC machine driver for Intel platforms + with the Wolfson/Cirrus WM8804 I2S audio codec. + Say Y or m if you have such a device. This is a recommended option. + If unsure select "N". + +endif ## SND_SOC_SOF_APOLLOLAKE + +if SND_SOC_INTEL_KBL + +config SND_SOC_INTEL_KBL_RT5663_MAX98927_MACH + tristate "KBL with RT5663 and MAX98927 in I2S Mode" + depends on I2C && ACPI + depends on MFD_INTEL_LPSS || COMPILE_TEST + select SND_SOC_RT5663 + select SND_SOC_MAX98927 + select SND_SOC_DMIC + select SND_SOC_HDAC_HDMI + select SND_SOC_INTEL_SKYLAKE_SSP_CLK + help + This adds support for ASoC Onboard Codec I2S machine driver. This will + create an alsa sound card for RT5663 + MAX98927. + Say Y or m if you have such a device. This is a recommended option. + If unsure select "N". + +config SND_SOC_INTEL_KBL_RT5663_RT5514_MAX98927_MACH + tristate "KBL with RT5663, RT5514 and MAX98927 in I2S Mode" + depends on I2C && ACPI + depends on MFD_INTEL_LPSS || COMPILE_TEST + depends on SPI + select SND_SOC_RT5663 + select SND_SOC_RT5514 + select SND_SOC_RT5514_SPI + select SND_SOC_MAX98927 + select SND_SOC_HDAC_HDMI + select SND_SOC_INTEL_SKYLAKE_SSP_CLK + help + This adds support for ASoC Onboard Codec I2S machine driver. This will + create an alsa sound card for RT5663 + RT5514 + MAX98927. + Say Y or m if you have such a device. This is a recommended option. + If unsure select "N". + +config SND_SOC_INTEL_KBL_DA7219_MAX98357A_MACH + tristate "KBL with DA7219 and MAX98357A in I2S Mode" + depends on I2C && ACPI + depends on MFD_INTEL_LPSS || COMPILE_TEST + select SND_SOC_INTEL_DA7219_MAX98357A_GENERIC + help + This adds support for ASoC Onboard Codec I2S machine driver. This will + create an alsa sound card for DA7219 + MAX98357A I2S audio codec. + Say Y if you have such a device. + +config SND_SOC_INTEL_KBL_DA7219_MAX98927_MACH + tristate "KBL with DA7219 and MAX98927 in I2S Mode" + depends on I2C && ACPI + depends on MFD_INTEL_LPSS || COMPILE_TEST + select SND_SOC_DA7219 + select SND_SOC_MAX98927 + select SND_SOC_MAX98373_I2C + select SND_SOC_DMIC + select SND_SOC_HDAC_HDMI + help + This adds support for ASoC Onboard Codec I2S machine driver. This will + create an alsa sound card for DA7219 + MAX98927 I2S audio codec. + Say Y if you have such a device. + If unsure select "N". + +config SND_SOC_INTEL_KBL_RT5660_MACH + tristate "KBL with RT5660 in I2S Mode" + depends on I2C && ACPI + depends on MFD_INTEL_LPSS || COMPILE_TEST + depends on GPIOLIB || COMPILE_TEST + select SND_SOC_RT5660 + select SND_SOC_HDAC_HDMI + help + This adds support for ASoC Onboard Codec I2S machine driver. This will + create an alsa sound card for RT5660 I2S audio codec. + Say Y if you have such a device. + +endif ## SND_SOC_INTEL_KBL + +if SND_SOC_SOF_GEMINILAKE + +config SND_SOC_INTEL_GLK_DA7219_MAX98357A_MACH + tristate "GLK with DA7219 and MAX98357A in I2S Mode" + depends on I2C && ACPI + depends on MFD_INTEL_LPSS || COMPILE_TEST + depends on SND_HDA_CODEC_HDMI && SND_SOC_SOF_HDA_AUDIO_CODEC + select SND_SOC_INTEL_BXT_DA7219_MAX98357A_COMMON + help + This adds support for ASoC machine driver for Geminilake platforms + with DA7219 + MAX98357A I2S audio codec. + Say Y or m if you have such a device. This is a recommended option. + If unsure select "N". + +config SND_SOC_INTEL_GLK_RT5682_MAX98357A_MACH + tristate "GLK with RT5682 and MAX98357A in I2S Mode" + depends on I2C && ACPI + depends on MFD_INTEL_LPSS || COMPILE_TEST + depends on SND_HDA_CODEC_HDMI && SND_SOC_SOF_HDA_AUDIO_CODEC + select SND_SOC_RT5682_I2C + select SND_SOC_RT5682S + select SND_SOC_MAX98357A + select SND_SOC_DMIC + select SND_SOC_HDAC_HDMI + select SND_SOC_INTEL_HDA_DSP_COMMON + help + This adds support for ASoC machine driver for Geminilake platforms + with RT5682 + MAX98357A I2S audio codec. + Say Y if you have such a device. + If unsure select "N". + +endif ## SND_SOC_SOF_GEMINILAKE + +if SND_SOC_INTEL_SKYLAKE_HDAUDIO_CODEC || SND_SOC_SOF_HDA_AUDIO_CODEC + +config SND_SOC_INTEL_SKL_HDA_DSP_GENERIC_MACH + tristate "Skylake+ with HDA Codecs" + depends on SND_HDA_CODEC_HDMI + select SND_SOC_HDAC_HDMI + select SND_SOC_INTEL_HDA_DSP_COMMON + select SND_SOC_DMIC + # SND_SOC_HDAC_HDA is already selected + help + This adds support for ASoC machine driver for Intel Skylake+ + platforms with display (HDMI/DP) and HDA audio codecs, and + Smart Sound Technology (SST) integrated audio DSP. + Say Y or m if you have such a device. This is a recommended option. + If unsure select "N". + +endif ## SND_SOC_INTEL_SKYLAKE_HDAUDIO_CODEC || SND_SOC_SOF_HDA_AUDIO_CODEC + +if SND_SOC_SOF_HDA_LINK || SND_SOC_SOF_BAYTRAIL +config SND_SOC_INTEL_SOF_RT5682_MACH + tristate "SOF with rt5682 codec in I2S Mode" + depends on I2C && ACPI + depends on ((SND_HDA_CODEC_HDMI && SND_SOC_SOF_HDA_AUDIO_CODEC) &&\ + (MFD_INTEL_LPSS || COMPILE_TEST)) ||\ + (SND_SOC_SOF_BAYTRAIL && (X86_INTEL_LPSS || COMPILE_TEST)) + select SND_SOC_MAX98373_I2C + select SND_SOC_MAX98390 + select SND_SOC_RT1011 + select SND_SOC_RT1015 + select SND_SOC_RT1015P + select SND_SOC_RT5682_I2C + select SND_SOC_RT5682S + select SND_SOC_DMIC + select SND_SOC_HDAC_HDMI + select SND_SOC_INTEL_HDA_DSP_COMMON + select SND_SOC_INTEL_SOF_MAXIM_COMMON + select SND_SOC_INTEL_SOF_REALTEK_COMMON + help + This adds support for ASoC machine driver for SOF platforms + with rt5682 codec. + Say Y if you have such a device. + If unsure select "N". + +config SND_SOC_INTEL_SOF_CS42L42_MACH + tristate "SOF with cs42l42 codec in I2S Mode" + depends on I2C && ACPI + depends on ((SND_HDA_CODEC_HDMI && SND_SOC_SOF_HDA_AUDIO_CODEC) &&\ + (MFD_INTEL_LPSS || COMPILE_TEST)) + select SND_SOC_CS42L42 + select SND_SOC_MAX98357A + select SND_SOC_DMIC + select SND_SOC_HDAC_HDMI + select SND_SOC_INTEL_HDA_DSP_COMMON + select SND_SOC_INTEL_SOF_MAXIM_COMMON + help + This adds support for ASoC machine driver for SOF platforms + with cs42l42 codec. + Say Y if you have such a device. + If unsure select "N". + +config SND_SOC_INTEL_SOF_PCM512x_MACH + tristate "SOF with TI PCM512x codec" + depends on I2C && ACPI + depends on (SND_SOC_SOF_HDA_AUDIO_CODEC && (MFD_INTEL_LPSS || COMPILE_TEST)) ||\ + (SND_SOC_SOF_BAYTRAIL && (X86_INTEL_LPSS || COMPILE_TEST)) + depends on SND_HDA_CODEC_HDMI + select SND_SOC_INTEL_HDA_DSP_COMMON + select SND_SOC_PCM512x_I2C + help + This adds support for ASoC machine driver for SOF platforms + with TI PCM512x I2S audio codec. + Say Y or m if you have such a device. + If unsure select "N". + +config SND_SOC_INTEL_SOF_ES8336_MACH + tristate "SOF with ES8336 or ES8326 codec in I2S mode" + depends on I2C && ACPI + depends on MFD_INTEL_LPSS || COMPILE_TEST + depends on GPIOLIB || COMPILE_TEST + depends on SND_HDA_CODEC_HDMI && SND_SOC_SOF_HDA_AUDIO_CODEC + select SND_SOC_ES8316 + select SND_SOC_ES8326 + select SND_SOC_DMIC + select SND_SOC_INTEL_HDA_DSP_COMMON + help + This adds support for ASoC machine driver for SOF platforms + with es8336 codec. + Say Y if you have such a device. + If unsure select "N". + +config SND_SOC_INTEL_SOF_NAU8825_MACH + tristate "SOF with nau8825 codec in I2S Mode" + depends on I2C && ACPI + depends on ((SND_HDA_CODEC_HDMI && SND_SOC_SOF_HDA_AUDIO_CODEC) &&\ + (MFD_INTEL_LPSS || COMPILE_TEST)) + select SND_SOC_NAU8825 + select SND_SOC_RT1015P + select SND_SOC_MAX98373_I2C + select SND_SOC_MAX98357A + select SND_SOC_NAU8315 + select SND_SOC_DMIC + select SND_SOC_HDAC_HDMI + select SND_SOC_INTEL_HDA_DSP_COMMON + select SND_SOC_INTEL_SOF_MAXIM_COMMON + select SND_SOC_INTEL_SOF_REALTEK_COMMON + help + This adds support for ASoC machine driver for SOF platforms + with nau8825 codec. + Say Y if you have such a device. + If unsure select "N". + +endif ## SND_SOC_SOF_HDA_LINK || SND_SOC_SOF_BAYTRAIL + +if (SND_SOC_SOF_COMETLAKE && SND_SOC_SOF_HDA_LINK) + +config SND_SOC_INTEL_CML_LP_DA7219_MAX98357A_MACH + tristate "CML_LP with DA7219 and MAX98357A in I2S Mode" + depends on I2C && ACPI + depends on MFD_INTEL_LPSS || COMPILE_TEST + select SND_SOC_INTEL_BXT_DA7219_MAX98357A_COMMON + help + This adds support for ASoC machine driver for Cometlake platforms + with DA7219 + MAX98357A I2S audio codec. + Say Y or m if you have such a device. This is a recommended option. + If unsure select "N". + +config SND_SOC_INTEL_SOF_CML_RT1011_RT5682_MACH + tristate "CML with RT1011 and RT5682 in I2S Mode" + depends on I2C && ACPI + depends on MFD_INTEL_LPSS || COMPILE_TEST + depends on SND_HDA_CODEC_HDMI && SND_SOC_SOF_HDA_AUDIO_CODEC + select SND_SOC_RT1011 + select SND_SOC_RT5682_I2C + select SND_SOC_DMIC + select SND_SOC_HDAC_HDMI + select SND_SOC_INTEL_HDA_DSP_COMMON + help + This adds support for ASoC machine driver for SOF platform with + RT1011 + RT5682 I2S codec. + Say Y if you have such a device. + If unsure select "N". + +endif ## SND_SOC_SOF_COMETLAKE && SND_SOC_SOF_HDA_LINK + +if SND_SOC_SOF_JASPERLAKE + +config SND_SOC_INTEL_SOF_DA7219_MAX98373_MACH + tristate "SOF with DA7219 and MAX98373/MAX98360A in I2S Mode" + depends on I2C && ACPI + depends on MFD_INTEL_LPSS || COMPILE_TEST + depends on SND_HDA_CODEC_HDMI && SND_SOC_SOF_HDA_AUDIO_CODEC + select SND_SOC_INTEL_HDA_DSP_COMMON + select SND_SOC_DA7219 + select SND_SOC_MAX98373_I2C + select SND_SOC_DMIC + help + This adds support for ASoC machine driver for SOF platforms + with DA7219 + MAX98373/MAX98360A I2S audio codec. + Say Y if you have such a device. + If unsure select "N". + +endif ## SND_SOC_SOF_JASPERLAKE + +if SND_SOC_SOF_HDA_LINK + +config SND_SOC_INTEL_SOF_SSP_AMP_MACH + tristate "SOF with amplifiers in I2S Mode" + depends on I2C && ACPI + depends on MFD_INTEL_LPSS || COMPILE_TEST + select SND_SOC_RT1308 + select SND_SOC_CS35L41_I2C + select SND_SOC_DMIC + select SND_SOC_HDAC_HDMI + select SND_SOC_INTEL_HDA_DSP_COMMON + select SND_SOC_INTEL_SOF_REALTEK_COMMON + select SND_SOC_INTEL_SOF_CIRRUS_COMMON + help + This adds support for ASoC machine driver for SOF platforms + with RT1308/CS35L41 I2S audio codec. + Say Y if you have such a device. + If unsure select "N". +endif ## SND_SOC_SOF_HDA_LINK + +if SND_SOC_SOF_ELKHARTLAKE + +config SND_SOC_INTEL_EHL_RT5660_MACH + tristate "EHL with RT5660 in I2S mode" + depends on I2C && ACPI + depends on MFD_INTEL_LPSS || COMPILE_TEST + depends on SND_HDA_CODEC_HDMI && SND_SOC_SOF_HDA_AUDIO_CODEC + select SND_SOC_RT5660 + select SND_SOC_DMIC + select SND_SOC_INTEL_HDA_DSP_COMMON + help + This adds support for ASoC machine driver for Elkhart Lake + platform with RT5660 I2S audio codec. + +endif ## SND_SOC_SOF_ELKHARTLAKE + +if SND_SOC_SOF_INTEL_SOUNDWIRE + +config SND_SOC_INTEL_SOUNDWIRE_SOF_MACH + tristate "SoundWire generic machine driver" + depends on I2C && ACPI + depends on MFD_INTEL_LPSS || COMPILE_TEST + depends on SND_SOC_INTEL_USER_FRIENDLY_LONG_NAMES || COMPILE_TEST + depends on SOUNDWIRE + select SND_SOC_MAX98373_I2C + select SND_SOC_MAX98373_SDW + select SND_SOC_RT700_SDW + select SND_SOC_RT711_SDW + select SND_SOC_RT711_SDCA_SDW + select SND_SOC_RT1308_SDW + select SND_SOC_RT1308 + select SND_SOC_RT1316_SDW + select SND_SOC_RT1318_SDW + select SND_SOC_RT715_SDW + select SND_SOC_RT715_SDCA_SDW + select SND_SOC_RT5682_SDW + select SND_SOC_DMIC + select SND_SOC_INTEL_HDA_DSP_COMMON + select SND_SOC_INTEL_SOF_MAXIM_COMMON + imply SND_SOC_SDW_MOCKUP + help + Add support for Intel SoundWire-based platforms connected to + MAX98373, RT700, RT711, RT1308 and RT715 + If unsure select "N". + +endif + +endif ## SND_SOC_INTEL_MACH -- cgit v1.2.3