From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- sound/soc/intel/boards/bytcr_wm5102.c | 491 ++++++++++++++++++++++++++++++++++ 1 file changed, 491 insertions(+) create mode 100644 sound/soc/intel/boards/bytcr_wm5102.c (limited to 'sound/soc/intel/boards/bytcr_wm5102.c') diff --git a/sound/soc/intel/boards/bytcr_wm5102.c b/sound/soc/intel/boards/bytcr_wm5102.c new file mode 100644 index 000000000..c0706537f --- /dev/null +++ b/sound/soc/intel/boards/bytcr_wm5102.c @@ -0,0 +1,491 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * bytcr_wm5102.c - ASoc Machine driver for Intel Baytrail platforms with a + * Wolfson Microelectronics WM5102 codec + * + * Copyright (C) 2020 Hans de Goede + * Loosely based on bytcr_rt5640.c which is: + * Copyright (C) 2014-2020 Intel Corp + * Author: Subhransu S. Prusty + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include "../../codecs/wm5102.h" +#include "../atom/sst-atom-controls.h" + +#define MCLK_FREQ 25000000 + +#define WM5102_MAX_SYSCLK_4K 49152000 /* max sysclk for 4K family */ +#define WM5102_MAX_SYSCLK_11025 45158400 /* max sysclk for 11.025K family */ + +struct byt_wm5102_private { + struct snd_soc_jack jack; + struct clk *mclk; + struct gpio_desc *spkvdd_en_gpio; +}; + +static int byt_wm5102_spkvdd_power_event(struct snd_soc_dapm_widget *w, + struct snd_kcontrol *kcontrol, int event) +{ + struct snd_soc_card *card = w->dapm->card; + struct byt_wm5102_private *priv = snd_soc_card_get_drvdata(card); + + gpiod_set_value_cansleep(priv->spkvdd_en_gpio, + !!SND_SOC_DAPM_EVENT_ON(event)); + + return 0; +} + +static int byt_wm5102_prepare_and_enable_pll1(struct snd_soc_dai *codec_dai, int rate) +{ + struct snd_soc_component *codec_component = codec_dai->component; + int sr_mult = ((rate % 4000) == 0) ? + (WM5102_MAX_SYSCLK_4K / rate) : + (WM5102_MAX_SYSCLK_11025 / rate); + int ret; + + /* Reset FLL1 */ + snd_soc_dai_set_pll(codec_dai, WM5102_FLL1_REFCLK, ARIZONA_FLL_SRC_NONE, 0, 0); + snd_soc_dai_set_pll(codec_dai, WM5102_FLL1, ARIZONA_FLL_SRC_NONE, 0, 0); + + /* Configure the FLL1 PLL before selecting it */ + ret = snd_soc_dai_set_pll(codec_dai, WM5102_FLL1, ARIZONA_CLK_SRC_MCLK1, + MCLK_FREQ, rate * sr_mult); + if (ret) { + dev_err(codec_component->dev, "Error setting PLL: %d\n", ret); + return ret; + } + + ret = snd_soc_component_set_sysclk(codec_component, ARIZONA_CLK_SYSCLK, + ARIZONA_CLK_SRC_FLL1, rate * sr_mult, + SND_SOC_CLOCK_IN); + if (ret) { + dev_err(codec_component->dev, "Error setting SYSCLK: %d\n", ret); + return ret; + } + + ret = snd_soc_dai_set_sysclk(codec_dai, ARIZONA_CLK_SYSCLK, + rate * 512, SND_SOC_CLOCK_IN); + if (ret) { + dev_err(codec_component->dev, "Error setting clock: %d\n", ret); + return ret; + } + + return 0; +} + +static int platform_clock_control(struct snd_soc_dapm_widget *w, + struct snd_kcontrol *k, int event) +{ + struct snd_soc_dapm_context *dapm = w->dapm; + struct snd_soc_card *card = dapm->card; + struct snd_soc_dai *codec_dai; + struct byt_wm5102_private *priv = snd_soc_card_get_drvdata(card); + int ret; + + codec_dai = snd_soc_card_get_codec_dai(card, "wm5102-aif1"); + if (!codec_dai) { + dev_err(card->dev, "Error codec DAI not found\n"); + return -EIO; + } + + if (SND_SOC_DAPM_EVENT_ON(event)) { + ret = clk_prepare_enable(priv->mclk); + if (ret) { + dev_err(card->dev, "Error enabling MCLK: %d\n", ret); + return ret; + } + ret = byt_wm5102_prepare_and_enable_pll1(codec_dai, 48000); + if (ret) { + dev_err(card->dev, "Error setting codec sysclk: %d\n", ret); + return ret; + } + } else { + /* + * The WM5102 has a separate 32KHz clock for jack-detect + * so we can disable the PLL, followed by disabling the + * platform clock which is the source-clock for the PLL. + */ + snd_soc_dai_set_pll(codec_dai, WM5102_FLL1, ARIZONA_FLL_SRC_NONE, 0, 0); + clk_disable_unprepare(priv->mclk); + } + + return 0; +} + +static const struct snd_soc_dapm_widget byt_wm5102_widgets[] = { + SND_SOC_DAPM_HP("Headphone", NULL), + SND_SOC_DAPM_MIC("Headset Mic", NULL), + SND_SOC_DAPM_MIC("Internal Mic", NULL), + SND_SOC_DAPM_SPK("Speaker", NULL), + SND_SOC_DAPM_SUPPLY("Platform Clock", SND_SOC_NOPM, 0, 0, + platform_clock_control, SND_SOC_DAPM_PRE_PMU | + SND_SOC_DAPM_POST_PMD), + SND_SOC_DAPM_SUPPLY("Speaker VDD", SND_SOC_NOPM, 0, 0, + byt_wm5102_spkvdd_power_event, + SND_SOC_DAPM_PRE_PMD | SND_SOC_DAPM_POST_PMU), +}; + +static const struct snd_soc_dapm_route byt_wm5102_audio_map[] = { + {"Headphone", NULL, "Platform Clock"}, + {"Headset Mic", NULL, "Platform Clock"}, + {"Internal Mic", NULL, "Platform Clock"}, + {"Speaker", NULL, "Platform Clock"}, + + {"Speaker", NULL, "SPKOUTLP"}, + {"Speaker", NULL, "SPKOUTLN"}, + {"Speaker", NULL, "SPKOUTRP"}, + {"Speaker", NULL, "SPKOUTRN"}, + {"Speaker", NULL, "Speaker VDD"}, + + {"Headphone", NULL, "HPOUT1L"}, + {"Headphone", NULL, "HPOUT1R"}, + + {"Internal Mic", NULL, "MICBIAS3"}, + {"IN3L", NULL, "Internal Mic"}, + + /* + * The Headset Mix uses MICBIAS1 or 2 depending on if a CTIA/OMTP Headset + * is connected, as the MICBIAS is applied after the CTIA/OMTP cross-switch. + */ + {"Headset Mic", NULL, "MICBIAS1"}, + {"Headset Mic", NULL, "MICBIAS2"}, + {"IN1L", NULL, "Headset Mic"}, + + {"AIF1 Playback", NULL, "ssp0 Tx"}, + {"ssp0 Tx", NULL, "modem_out"}, + + {"modem_in", NULL, "ssp0 Rx"}, + {"ssp0 Rx", NULL, "AIF1 Capture"}, +}; + +static const struct snd_kcontrol_new byt_wm5102_controls[] = { + SOC_DAPM_PIN_SWITCH("Headphone"), + SOC_DAPM_PIN_SWITCH("Headset Mic"), + SOC_DAPM_PIN_SWITCH("Internal Mic"), + SOC_DAPM_PIN_SWITCH("Speaker"), +}; + +static struct snd_soc_jack_pin byt_wm5102_pins[] = { + { + .pin = "Headphone", + .mask = SND_JACK_HEADPHONE, + }, + { + .pin = "Headset Mic", + .mask = SND_JACK_MICROPHONE, + }, +}; + +static int byt_wm5102_init(struct snd_soc_pcm_runtime *runtime) +{ + struct snd_soc_card *card = runtime->card; + struct byt_wm5102_private *priv = snd_soc_card_get_drvdata(card); + struct snd_soc_component *component = asoc_rtd_to_codec(runtime, 0)->component; + int ret, jack_type; + + card->dapm.idle_bias_off = true; + + ret = snd_soc_add_card_controls(card, byt_wm5102_controls, + ARRAY_SIZE(byt_wm5102_controls)); + if (ret) { + dev_err(card->dev, "Error adding card controls: %d\n", ret); + return ret; + } + + /* + * The firmware might enable the clock at boot (this information + * may or may not be reflected in the enable clock register). + * To change the rate we must disable the clock first to cover these + * cases. Due to common clock framework restrictions that do not allow + * to disable a clock that has not been enabled, we need to enable + * the clock first. + */ + ret = clk_prepare_enable(priv->mclk); + if (!ret) + clk_disable_unprepare(priv->mclk); + + ret = clk_set_rate(priv->mclk, MCLK_FREQ); + if (ret) { + dev_err(card->dev, "Error setting MCLK rate: %d\n", ret); + return ret; + } + + jack_type = ARIZONA_JACK_MASK | SND_JACK_BTN_0 | SND_JACK_BTN_1 | + SND_JACK_BTN_2 | SND_JACK_BTN_3; + ret = snd_soc_card_jack_new_pins(card, "Headset", jack_type, + &priv->jack, byt_wm5102_pins, + ARRAY_SIZE(byt_wm5102_pins)); + if (ret) { + dev_err(card->dev, "Error creating jack: %d\n", ret); + return ret; + } + + snd_soc_component_set_jack(component, &priv->jack, NULL); + + return 0; +} + +static int byt_wm5102_codec_fixup(struct snd_soc_pcm_runtime *rtd, + struct snd_pcm_hw_params *params) +{ + struct snd_interval *rate = hw_param_interval(params, + SNDRV_PCM_HW_PARAM_RATE); + struct snd_interval *channels = hw_param_interval(params, + SNDRV_PCM_HW_PARAM_CHANNELS); + int ret; + + /* The DSP will convert the FE rate to 48k, stereo */ + rate->min = 48000; + rate->max = 48000; + channels->min = 2; + channels->max = 2; + + /* set SSP0 to 16-bit */ + params_set_format(params, SNDRV_PCM_FORMAT_S16_LE); + + /* + * Default mode for SSP configuration is TDM 4 slot, override config + * with explicit setting to I2S 2ch 16-bit. The word length is set with + * dai_set_tdm_slot() since there is no other API exposed + */ + ret = snd_soc_dai_set_fmt(asoc_rtd_to_cpu(rtd, 0), + SND_SOC_DAIFMT_I2S | + SND_SOC_DAIFMT_NB_NF | + SND_SOC_DAIFMT_BP_FP); + if (ret) { + dev_err(rtd->dev, "Error setting format to I2S: %d\n", ret); + return ret; + } + + ret = snd_soc_dai_set_tdm_slot(asoc_rtd_to_cpu(rtd, 0), 0x3, 0x3, 2, 16); + if (ret) { + dev_err(rtd->dev, "Error setting I2S config: %d\n", ret); + return ret; + } + + return 0; +} + +static int byt_wm5102_aif1_startup(struct snd_pcm_substream *substream) +{ + return snd_pcm_hw_constraint_single(substream->runtime, + SNDRV_PCM_HW_PARAM_RATE, 48000); +} + +static const struct snd_soc_ops byt_wm5102_aif1_ops = { + .startup = byt_wm5102_aif1_startup, +}; + +SND_SOC_DAILINK_DEF(dummy, + DAILINK_COMP_ARRAY(COMP_DUMMY())); + +SND_SOC_DAILINK_DEF(media, + DAILINK_COMP_ARRAY(COMP_CPU("media-cpu-dai"))); + +SND_SOC_DAILINK_DEF(deepbuffer, + DAILINK_COMP_ARRAY(COMP_CPU("deepbuffer-cpu-dai"))); + +SND_SOC_DAILINK_DEF(ssp0_port, + DAILINK_COMP_ARRAY(COMP_CPU("ssp0-port"))); + +SND_SOC_DAILINK_DEF(ssp0_codec, + DAILINK_COMP_ARRAY(COMP_CODEC( + /* + * Note there is no need to overwrite the codec-name as is done in + * other bytcr machine drivers, because the codec is a MFD child-dev. + */ + "wm5102-codec", + "wm5102-aif1"))); + +SND_SOC_DAILINK_DEF(platform, + DAILINK_COMP_ARRAY(COMP_PLATFORM("sst-mfld-platform"))); + +static struct snd_soc_dai_link byt_wm5102_dais[] = { + [MERR_DPCM_AUDIO] = { + .name = "Baytrail Audio Port", + .stream_name = "Baytrail Audio", + .nonatomic = true, + .dynamic = 1, + .dpcm_playback = 1, + .dpcm_capture = 1, + .ops = &byt_wm5102_aif1_ops, + SND_SOC_DAILINK_REG(media, dummy, platform), + + }, + [MERR_DPCM_DEEP_BUFFER] = { + .name = "Deep-Buffer Audio Port", + .stream_name = "Deep-Buffer Audio", + .nonatomic = true, + .dynamic = 1, + .dpcm_playback = 1, + .ops = &byt_wm5102_aif1_ops, + SND_SOC_DAILINK_REG(deepbuffer, dummy, platform), + }, + /* back ends */ + { + /* + * This must be named SSP2-Codec even though this machine driver + * always uses SSP0. Most machine drivers support both and dynamically + * update the dailink to point to SSP0 or SSP2, while keeping the name + * as "SSP2-Codec". The SOF tplg files hardcode the "SSP2-Codec" even + * in the byt-foo-ssp0.tplg versions because the other machine-drivers + * use "SSP2-Codec" even when SSP0 is used. + */ + .name = "SSP2-Codec", + .id = 0, + .no_pcm = 1, + .dai_fmt = SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_NB_NF + | SND_SOC_DAIFMT_CBC_CFC, + .be_hw_params_fixup = byt_wm5102_codec_fixup, + .dpcm_playback = 1, + .dpcm_capture = 1, + .init = byt_wm5102_init, + SND_SOC_DAILINK_REG(ssp0_port, ssp0_codec, platform), + }, +}; + +/* use space before codec name to simplify card ID, and simplify driver name */ +#define SOF_CARD_NAME "bytcht wm5102" /* card name will be 'sof-bytcht wm5102' */ +#define SOF_DRIVER_NAME "SOF" + +#define CARD_NAME "bytcr-wm5102" +#define DRIVER_NAME NULL /* card name will be used for driver name */ + +/* SoC card */ +static struct snd_soc_card byt_wm5102_card = { + .owner = THIS_MODULE, + .dai_link = byt_wm5102_dais, + .num_links = ARRAY_SIZE(byt_wm5102_dais), + .dapm_widgets = byt_wm5102_widgets, + .num_dapm_widgets = ARRAY_SIZE(byt_wm5102_widgets), + .dapm_routes = byt_wm5102_audio_map, + .num_dapm_routes = ARRAY_SIZE(byt_wm5102_audio_map), + .fully_routed = true, +}; + +static int snd_byt_wm5102_mc_probe(struct platform_device *pdev) +{ + char codec_name[SND_ACPI_I2C_ID_LEN]; + struct device *dev = &pdev->dev; + struct byt_wm5102_private *priv; + struct snd_soc_acpi_mach *mach; + const char *platform_name; + struct acpi_device *adev; + struct device *codec_dev; + bool sof_parent; + int ret; + + priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL); + if (!priv) + return -ENOMEM; + + /* Get MCLK */ + priv->mclk = devm_clk_get(dev, "pmc_plt_clk_3"); + if (IS_ERR(priv->mclk)) + return dev_err_probe(dev, PTR_ERR(priv->mclk), "getting pmc_plt_clk_3\n"); + + /* + * Get speaker VDD enable GPIO: + * 1. Get codec-device-name + * 2. Get codec-device + * 3. Get GPIO from codec-device + */ + mach = dev->platform_data; + adev = acpi_dev_get_first_match_dev(mach->id, NULL, -1); + if (!adev) { + dev_err(dev, "Error cannot find acpi-dev for codec\n"); + return -ENOENT; + } + snprintf(codec_name, sizeof(codec_name), "spi-%s", acpi_dev_name(adev)); + + codec_dev = bus_find_device_by_name(&spi_bus_type, NULL, codec_name); + acpi_dev_put(adev); + if (!codec_dev) + return -EPROBE_DEFER; + + /* Note no devm_ here since we call gpiod_get on codec_dev rather then dev */ + priv->spkvdd_en_gpio = gpiod_get(codec_dev, "wlf,spkvdd-ena", GPIOD_OUT_LOW); + put_device(codec_dev); + + if (IS_ERR(priv->spkvdd_en_gpio)) { + ret = PTR_ERR(priv->spkvdd_en_gpio); + /* + * The spkvdd gpio-lookup is registered by: drivers/mfd/arizona-spi.c, + * so -ENOENT means that arizona-spi hasn't probed yet. + */ + if (ret == -ENOENT) + ret = -EPROBE_DEFER; + + return dev_err_probe(dev, ret, "getting spkvdd-GPIO\n"); + } + + /* override platform name, if required */ + byt_wm5102_card.dev = dev; + platform_name = mach->mach_params.platform; + ret = snd_soc_fixup_dai_links_platform_name(&byt_wm5102_card, platform_name); + if (ret) + goto out_put_gpio; + + /* set card and driver name and pm-ops */ + sof_parent = snd_soc_acpi_sof_parent(dev); + if (sof_parent) { + byt_wm5102_card.name = SOF_CARD_NAME; + byt_wm5102_card.driver_name = SOF_DRIVER_NAME; + dev->driver->pm = &snd_soc_pm_ops; + } else { + byt_wm5102_card.name = CARD_NAME; + byt_wm5102_card.driver_name = DRIVER_NAME; + } + + snd_soc_card_set_drvdata(&byt_wm5102_card, priv); + ret = devm_snd_soc_register_card(dev, &byt_wm5102_card); + if (ret) { + dev_err_probe(dev, ret, "registering card\n"); + goto out_put_gpio; + } + + platform_set_drvdata(pdev, &byt_wm5102_card); + return 0; + +out_put_gpio: + gpiod_put(priv->spkvdd_en_gpio); + return ret; +} + +static int snd_byt_wm5102_mc_remove(struct platform_device *pdev) +{ + struct snd_soc_card *card = platform_get_drvdata(pdev); + struct byt_wm5102_private *priv = snd_soc_card_get_drvdata(card); + + gpiod_put(priv->spkvdd_en_gpio); + return 0; +} + +static struct platform_driver snd_byt_wm5102_mc_driver = { + .driver = { + .name = "bytcr_wm5102", + }, + .probe = snd_byt_wm5102_mc_probe, + .remove = snd_byt_wm5102_mc_remove, +}; + +module_platform_driver(snd_byt_wm5102_mc_driver); + +MODULE_DESCRIPTION("ASoC Baytrail with WM5102 codec machine driver"); +MODULE_AUTHOR("Hans de Goede "); +MODULE_LICENSE("GPL v2"); +MODULE_ALIAS("platform:bytcr_wm5102"); -- cgit v1.2.3