From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- sound/soc/intel/boards/cht_bsw_max98090_ti.c | 650 +++++++++++++++++++++++++++ 1 file changed, 650 insertions(+) create mode 100644 sound/soc/intel/boards/cht_bsw_max98090_ti.c (limited to 'sound/soc/intel/boards/cht_bsw_max98090_ti.c') diff --git a/sound/soc/intel/boards/cht_bsw_max98090_ti.c b/sound/soc/intel/boards/cht_bsw_max98090_ti.c new file mode 100644 index 000000000..2c086e901 --- /dev/null +++ b/sound/soc/intel/boards/cht_bsw_max98090_ti.c @@ -0,0 +1,650 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * cht-bsw-max98090.c - ASoc Machine driver for Intel Cherryview-based + * platforms Cherrytrail and Braswell, with max98090 & TI codec. + * + * Copyright (C) 2015 Intel Corp + * Author: Fang, Yang A + * This file is modified from cht_bsw_rt5645.c + * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + * + * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include "../../codecs/max98090.h" +#include "../atom/sst-atom-controls.h" +#include "../../codecs/ts3a227e.h" + +#define CHT_PLAT_CLK_3_HZ 19200000 +#define CHT_CODEC_DAI "HiFi" + +#define QUIRK_PMC_PLT_CLK_0 0x01 + +struct cht_mc_private { + struct clk *mclk; + struct snd_soc_jack jack; + bool ts3a227e_present; + int quirks; +}; + +static int platform_clock_control(struct snd_soc_dapm_widget *w, + struct snd_kcontrol *k, int event) +{ + struct snd_soc_dapm_context *dapm = w->dapm; + struct snd_soc_card *card = dapm->card; + struct snd_soc_dai *codec_dai; + struct cht_mc_private *ctx = snd_soc_card_get_drvdata(card); + int ret; + + /* See the comment in snd_cht_mc_probe() */ + if (ctx->quirks & QUIRK_PMC_PLT_CLK_0) + return 0; + + codec_dai = snd_soc_card_get_codec_dai(card, CHT_CODEC_DAI); + if (!codec_dai) { + dev_err(card->dev, "Codec dai not found; Unable to set platform clock\n"); + return -EIO; + } + + if (SND_SOC_DAPM_EVENT_ON(event)) { + ret = clk_prepare_enable(ctx->mclk); + if (ret < 0) { + dev_err(card->dev, + "could not configure MCLK state"); + return ret; + } + } else { + clk_disable_unprepare(ctx->mclk); + } + + return 0; +} + +static const struct snd_soc_dapm_widget cht_dapm_widgets[] = { + SND_SOC_DAPM_HP("Headphone", NULL), + SND_SOC_DAPM_MIC("Headset Mic", NULL), + SND_SOC_DAPM_MIC("Int Mic", NULL), + SND_SOC_DAPM_SPK("Ext Spk", NULL), + SND_SOC_DAPM_SUPPLY("Platform Clock", SND_SOC_NOPM, 0, 0, + platform_clock_control, SND_SOC_DAPM_PRE_PMU | + SND_SOC_DAPM_POST_PMD), +}; + +static const struct snd_soc_dapm_route cht_audio_map[] = { + {"IN34", NULL, "Headset Mic"}, + {"Headset Mic", NULL, "MICBIAS"}, + {"DMICL", NULL, "Int Mic"}, + {"Headphone", NULL, "HPL"}, + {"Headphone", NULL, "HPR"}, + {"Ext Spk", NULL, "SPKL"}, + {"Ext Spk", NULL, "SPKR"}, + {"HiFi Playback", NULL, "ssp2 Tx"}, + {"ssp2 Tx", NULL, "codec_out0"}, + {"ssp2 Tx", NULL, "codec_out1"}, + {"codec_in0", NULL, "ssp2 Rx" }, + {"codec_in1", NULL, "ssp2 Rx" }, + {"ssp2 Rx", NULL, "HiFi Capture"}, + {"Headphone", NULL, "Platform Clock"}, + {"Headset Mic", NULL, "Platform Clock"}, + {"Int Mic", NULL, "Platform Clock"}, + {"Ext Spk", NULL, "Platform Clock"}, +}; + +static const struct snd_kcontrol_new cht_mc_controls[] = { + SOC_DAPM_PIN_SWITCH("Headphone"), + SOC_DAPM_PIN_SWITCH("Headset Mic"), + SOC_DAPM_PIN_SWITCH("Int Mic"), + SOC_DAPM_PIN_SWITCH("Ext Spk"), +}; + +static int cht_aif1_hw_params(struct snd_pcm_substream *substream, + struct snd_pcm_hw_params *params) +{ + struct snd_soc_pcm_runtime *rtd = asoc_substream_to_rtd(substream); + struct snd_soc_dai *codec_dai = asoc_rtd_to_codec(rtd, 0); + int ret; + + ret = snd_soc_dai_set_sysclk(codec_dai, M98090_REG_SYSTEM_CLOCK, + CHT_PLAT_CLK_3_HZ, SND_SOC_CLOCK_IN); + if (ret < 0) { + dev_err(rtd->dev, "can't set codec sysclk: %d\n", ret); + return ret; + } + + return 0; +} + +static int cht_ti_jack_event(struct notifier_block *nb, + unsigned long event, void *data) +{ + struct snd_soc_jack *jack = (struct snd_soc_jack *)data; + struct snd_soc_dapm_context *dapm = &jack->card->dapm; + + if (event & SND_JACK_MICROPHONE) { + snd_soc_dapm_force_enable_pin(dapm, "SHDN"); + snd_soc_dapm_force_enable_pin(dapm, "MICBIAS"); + snd_soc_dapm_sync(dapm); + } else { + snd_soc_dapm_disable_pin(dapm, "MICBIAS"); + snd_soc_dapm_disable_pin(dapm, "SHDN"); + snd_soc_dapm_sync(dapm); + } + + return 0; +} + +static struct notifier_block cht_jack_nb = { + .notifier_call = cht_ti_jack_event, +}; + +static struct snd_soc_jack_pin hs_jack_pins[] = { + { + .pin = "Headphone", + .mask = SND_JACK_HEADPHONE, + }, + { + .pin = "Headset Mic", + .mask = SND_JACK_MICROPHONE, + }, +}; + +static struct snd_soc_jack_gpio hs_jack_gpios[] = { + { + .name = "hp", + .report = SND_JACK_HEADPHONE | SND_JACK_LINEOUT, + .debounce_time = 200, + }, + { + .name = "mic", + .invert = 1, + .report = SND_JACK_MICROPHONE, + .debounce_time = 200, + }, +}; + +static const struct acpi_gpio_params hp_gpios = { 0, 0, false }; +static const struct acpi_gpio_params mic_gpios = { 1, 0, false }; + +static const struct acpi_gpio_mapping acpi_max98090_gpios[] = { + { "hp-gpios", &hp_gpios, 1 }, + { "mic-gpios", &mic_gpios, 1 }, + {}, +}; + +static int cht_codec_init(struct snd_soc_pcm_runtime *runtime) +{ + int ret; + int jack_type; + struct cht_mc_private *ctx = snd_soc_card_get_drvdata(runtime->card); + struct snd_soc_jack *jack = &ctx->jack; + + if (ctx->ts3a227e_present) { + /* + * The jack has already been created in the + * cht_max98090_headset_init() function. + */ + snd_soc_jack_notifier_register(jack, &cht_jack_nb); + return 0; + } + + jack_type = SND_JACK_HEADPHONE | SND_JACK_MICROPHONE; + + ret = snd_soc_card_jack_new_pins(runtime->card, "Headset Jack", + jack_type, jack, + hs_jack_pins, + ARRAY_SIZE(hs_jack_pins)); + if (ret) { + dev_err(runtime->dev, "Headset Jack creation failed %d\n", ret); + return ret; + } + + ret = snd_soc_jack_add_gpiods(runtime->card->dev->parent, jack, + ARRAY_SIZE(hs_jack_gpios), + hs_jack_gpios); + if (ret) { + /* + * flag error but don't bail if jack detect is broken + * due to platform issues or bad BIOS/configuration + */ + dev_err(runtime->dev, + "jack detection gpios not added, error %d\n", ret); + } + + /* See the comment in snd_cht_mc_probe() */ + if (ctx->quirks & QUIRK_PMC_PLT_CLK_0) + return 0; + + /* + * The firmware might enable the clock at + * boot (this information may or may not + * be reflected in the enable clock register). + * To change the rate we must disable the clock + * first to cover these cases. Due to common + * clock framework restrictions that do not allow + * to disable a clock that has not been enabled, + * we need to enable the clock first. + */ + ret = clk_prepare_enable(ctx->mclk); + if (!ret) + clk_disable_unprepare(ctx->mclk); + + ret = clk_set_rate(ctx->mclk, CHT_PLAT_CLK_3_HZ); + + if (ret) + dev_err(runtime->dev, "unable to set MCLK rate\n"); + + return ret; +} + +static int cht_codec_fixup(struct snd_soc_pcm_runtime *rtd, + struct snd_pcm_hw_params *params) +{ + struct snd_interval *rate = hw_param_interval(params, + SNDRV_PCM_HW_PARAM_RATE); + struct snd_interval *channels = hw_param_interval(params, + SNDRV_PCM_HW_PARAM_CHANNELS); + int ret = 0; + unsigned int fmt = 0; + + ret = snd_soc_dai_set_tdm_slot(asoc_rtd_to_cpu(rtd, 0), 0x3, 0x3, 2, 16); + if (ret < 0) { + dev_err(rtd->dev, "can't set cpu_dai slot fmt: %d\n", ret); + return ret; + } + + fmt = SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_NB_NF | SND_SOC_DAIFMT_BP_FP; + + ret = snd_soc_dai_set_fmt(asoc_rtd_to_cpu(rtd, 0), fmt); + if (ret < 0) { + dev_err(rtd->dev, "can't set cpu_dai set fmt: %d\n", ret); + return ret; + } + + /* The DSP will convert the FE rate to 48k, stereo, 24bits */ + rate->min = rate->max = 48000; + channels->min = channels->max = 2; + + /* set SSP2 to 16-bit */ + params_set_format(params, SNDRV_PCM_FORMAT_S16_LE); + return 0; +} + +static int cht_aif1_startup(struct snd_pcm_substream *substream) +{ + return snd_pcm_hw_constraint_single(substream->runtime, + SNDRV_PCM_HW_PARAM_RATE, 48000); +} + +static int cht_max98090_headset_init(struct snd_soc_component *component) +{ + struct snd_soc_card *card = component->card; + struct cht_mc_private *ctx = snd_soc_card_get_drvdata(card); + struct snd_soc_jack *jack = &ctx->jack; + int jack_type; + int ret; + + /* + * TI supports 4 buttons headset detection + * KEY_MEDIA + * KEY_VOICECOMMAND + * KEY_VOLUMEUP + * KEY_VOLUMEDOWN + */ + jack_type = SND_JACK_HEADPHONE | SND_JACK_MICROPHONE | + SND_JACK_BTN_0 | SND_JACK_BTN_1 | + SND_JACK_BTN_2 | SND_JACK_BTN_3; + + ret = snd_soc_card_jack_new(card, "Headset Jack", jack_type, jack); + if (ret) { + dev_err(card->dev, "Headset Jack creation failed %d\n", ret); + return ret; + } + + return ts3a227e_enable_jack_detect(component, jack); +} + +static const struct snd_soc_ops cht_aif1_ops = { + .startup = cht_aif1_startup, +}; + +static const struct snd_soc_ops cht_be_ssp2_ops = { + .hw_params = cht_aif1_hw_params, +}; + +static struct snd_soc_aux_dev cht_max98090_headset_dev = { + .dlc = COMP_AUX("i2c-104C227E:00"), + .init = cht_max98090_headset_init, +}; + +SND_SOC_DAILINK_DEF(dummy, + DAILINK_COMP_ARRAY(COMP_DUMMY())); + +SND_SOC_DAILINK_DEF(media, + DAILINK_COMP_ARRAY(COMP_CPU("media-cpu-dai"))); + +SND_SOC_DAILINK_DEF(deepbuffer, + DAILINK_COMP_ARRAY(COMP_CPU("deepbuffer-cpu-dai"))); + +SND_SOC_DAILINK_DEF(ssp2_port, + DAILINK_COMP_ARRAY(COMP_CPU("ssp2-port"))); +SND_SOC_DAILINK_DEF(ssp2_codec, + DAILINK_COMP_ARRAY(COMP_CODEC("i2c-193C9890:00", "HiFi"))); + +SND_SOC_DAILINK_DEF(platform, + DAILINK_COMP_ARRAY(COMP_PLATFORM("sst-mfld-platform"))); + +static struct snd_soc_dai_link cht_dailink[] = { + [MERR_DPCM_AUDIO] = { + .name = "Audio Port", + .stream_name = "Audio", + .nonatomic = true, + .dynamic = 1, + .dpcm_playback = 1, + .dpcm_capture = 1, + .ops = &cht_aif1_ops, + SND_SOC_DAILINK_REG(media, dummy, platform), + }, + [MERR_DPCM_DEEP_BUFFER] = { + .name = "Deep-Buffer Audio Port", + .stream_name = "Deep-Buffer Audio", + .nonatomic = true, + .dynamic = 1, + .dpcm_playback = 1, + .ops = &cht_aif1_ops, + SND_SOC_DAILINK_REG(deepbuffer, dummy, platform), + }, + /* back ends */ + { + .name = "SSP2-Codec", + .id = 0, + .no_pcm = 1, + .dai_fmt = SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_NB_NF + | SND_SOC_DAIFMT_CBC_CFC, + .init = cht_codec_init, + .be_hw_params_fixup = cht_codec_fixup, + .dpcm_playback = 1, + .dpcm_capture = 1, + .ops = &cht_be_ssp2_ops, + SND_SOC_DAILINK_REG(ssp2_port, ssp2_codec, platform), + }, +}; + +/* use space before codec name to simplify card ID, and simplify driver name */ +#define SOF_CARD_NAME "bytcht max98090" /* card name will be 'sof-bytcht max98090 */ +#define SOF_DRIVER_NAME "SOF" + +#define CARD_NAME "chtmax98090" +#define DRIVER_NAME NULL /* card name will be used for driver name */ + +/* SoC card */ +static struct snd_soc_card snd_soc_card_cht = { + .owner = THIS_MODULE, + .dai_link = cht_dailink, + .num_links = ARRAY_SIZE(cht_dailink), + .aux_dev = &cht_max98090_headset_dev, + .num_aux_devs = 1, + .dapm_widgets = cht_dapm_widgets, + .num_dapm_widgets = ARRAY_SIZE(cht_dapm_widgets), + .dapm_routes = cht_audio_map, + .num_dapm_routes = ARRAY_SIZE(cht_audio_map), + .controls = cht_mc_controls, + .num_controls = ARRAY_SIZE(cht_mc_controls), +}; + +static const struct dmi_system_id cht_max98090_quirk_table[] = { + { + /* Banjo model Chromebook */ + .matches = { + DMI_MATCH(DMI_PRODUCT_NAME, "Banjo"), + }, + .driver_data = (void *)QUIRK_PMC_PLT_CLK_0, + }, + { + /* Candy model Chromebook */ + .matches = { + DMI_MATCH(DMI_PRODUCT_NAME, "Candy"), + }, + .driver_data = (void *)QUIRK_PMC_PLT_CLK_0, + }, + { + /* Clapper model Chromebook */ + .matches = { + DMI_MATCH(DMI_PRODUCT_NAME, "Clapper"), + }, + .driver_data = (void *)QUIRK_PMC_PLT_CLK_0, + }, + { + /* Cyan model Chromebook */ + .matches = { + DMI_MATCH(DMI_PRODUCT_NAME, "Cyan"), + }, + .driver_data = (void *)QUIRK_PMC_PLT_CLK_0, + }, + { + /* Enguarde model Chromebook */ + .matches = { + DMI_MATCH(DMI_PRODUCT_NAME, "Enguarde"), + }, + .driver_data = (void *)QUIRK_PMC_PLT_CLK_0, + }, + { + /* Glimmer model Chromebook */ + .matches = { + DMI_MATCH(DMI_PRODUCT_NAME, "Glimmer"), + }, + .driver_data = (void *)QUIRK_PMC_PLT_CLK_0, + }, + { + /* Gnawty model Chromebook (Acer Chromebook CB3-111) */ + .matches = { + DMI_MATCH(DMI_PRODUCT_NAME, "Gnawty"), + }, + .driver_data = (void *)QUIRK_PMC_PLT_CLK_0, + }, + { + /* Heli model Chromebook */ + .matches = { + DMI_MATCH(DMI_PRODUCT_NAME, "Heli"), + }, + .driver_data = (void *)QUIRK_PMC_PLT_CLK_0, + }, + { + /* Kip model Chromebook */ + .matches = { + DMI_MATCH(DMI_PRODUCT_NAME, "Kip"), + }, + .driver_data = (void *)QUIRK_PMC_PLT_CLK_0, + }, + { + /* Ninja model Chromebook */ + .matches = { + DMI_MATCH(DMI_PRODUCT_NAME, "Ninja"), + }, + .driver_data = (void *)QUIRK_PMC_PLT_CLK_0, + }, + { + /* Orco model Chromebook */ + .matches = { + DMI_MATCH(DMI_PRODUCT_NAME, "Orco"), + }, + .driver_data = (void *)QUIRK_PMC_PLT_CLK_0, + }, + { + /* Quawks model Chromebook */ + .matches = { + DMI_MATCH(DMI_PRODUCT_NAME, "Quawks"), + }, + .driver_data = (void *)QUIRK_PMC_PLT_CLK_0, + }, + { + /* Rambi model Chromebook */ + .matches = { + DMI_MATCH(DMI_PRODUCT_NAME, "Rambi"), + }, + .driver_data = (void *)QUIRK_PMC_PLT_CLK_0, + }, + { + /* Squawks model Chromebook */ + .matches = { + DMI_MATCH(DMI_PRODUCT_NAME, "Squawks"), + }, + .driver_data = (void *)QUIRK_PMC_PLT_CLK_0, + }, + { + /* Sumo model Chromebook */ + .matches = { + DMI_MATCH(DMI_PRODUCT_NAME, "Sumo"), + }, + .driver_data = (void *)QUIRK_PMC_PLT_CLK_0, + }, + { + /* Swanky model Chromebook (Toshiba Chromebook 2) */ + .matches = { + DMI_MATCH(DMI_PRODUCT_NAME, "Swanky"), + }, + .driver_data = (void *)QUIRK_PMC_PLT_CLK_0, + }, + { + /* Winky model Chromebook */ + .matches = { + DMI_MATCH(DMI_PRODUCT_NAME, "Winky"), + }, + .driver_data = (void *)QUIRK_PMC_PLT_CLK_0, + }, + {} +}; + +static int snd_cht_mc_probe(struct platform_device *pdev) +{ + const struct dmi_system_id *dmi_id; + struct device *dev = &pdev->dev; + int ret_val = 0; + struct cht_mc_private *drv; + const char *mclk_name; + struct snd_soc_acpi_mach *mach; + const char *platform_name; + bool sof_parent; + + drv = devm_kzalloc(dev, sizeof(*drv), GFP_KERNEL); + if (!drv) + return -ENOMEM; + + dmi_id = dmi_first_match(cht_max98090_quirk_table); + if (dmi_id) + drv->quirks = (unsigned long)dmi_id->driver_data; + + drv->ts3a227e_present = acpi_dev_found("104C227E"); + if (!drv->ts3a227e_present) { + /* no need probe TI jack detection chip */ + snd_soc_card_cht.aux_dev = NULL; + snd_soc_card_cht.num_aux_devs = 0; + + ret_val = devm_acpi_dev_add_driver_gpios(dev->parent, + acpi_max98090_gpios); + if (ret_val) + dev_dbg(dev, "Unable to add GPIO mapping table\n"); + } + + /* override platform name, if required */ + snd_soc_card_cht.dev = dev; + mach = dev->platform_data; + platform_name = mach->mach_params.platform; + + ret_val = snd_soc_fixup_dai_links_platform_name(&snd_soc_card_cht, + platform_name); + if (ret_val) + return ret_val; + + /* register the soc card */ + snd_soc_card_set_drvdata(&snd_soc_card_cht, drv); + + if (drv->quirks & QUIRK_PMC_PLT_CLK_0) + mclk_name = "pmc_plt_clk_0"; + else + mclk_name = "pmc_plt_clk_3"; + + drv->mclk = devm_clk_get(dev, mclk_name); + if (IS_ERR(drv->mclk)) { + dev_err(dev, + "Failed to get MCLK from %s: %ld\n", + mclk_name, PTR_ERR(drv->mclk)); + return PTR_ERR(drv->mclk); + } + + /* + * Boards which have the MAX98090's clk connected to clk_0 do not seem + * to like it if we muck with the clock. If we disable the clock when + * it is unused we get "max98090 i2c-193C9890:00: PLL unlocked" errors + * and the PLL never seems to lock again. + * So for these boards we enable it here once and leave it at that. + */ + if (drv->quirks & QUIRK_PMC_PLT_CLK_0) { + ret_val = clk_prepare_enable(drv->mclk); + if (ret_val < 0) { + dev_err(dev, "MCLK enable error: %d\n", ret_val); + return ret_val; + } + } + + sof_parent = snd_soc_acpi_sof_parent(dev); + + /* set card and driver name */ + if (sof_parent) { + snd_soc_card_cht.name = SOF_CARD_NAME; + snd_soc_card_cht.driver_name = SOF_DRIVER_NAME; + } else { + snd_soc_card_cht.name = CARD_NAME; + snd_soc_card_cht.driver_name = DRIVER_NAME; + } + + /* set pm ops */ + if (sof_parent) + dev->driver->pm = &snd_soc_pm_ops; + + ret_val = devm_snd_soc_register_card(dev, &snd_soc_card_cht); + if (ret_val) { + dev_err(dev, + "snd_soc_register_card failed %d\n", ret_val); + return ret_val; + } + platform_set_drvdata(pdev, &snd_soc_card_cht); + return ret_val; +} + +static int snd_cht_mc_remove(struct platform_device *pdev) +{ + struct snd_soc_card *card = platform_get_drvdata(pdev); + struct cht_mc_private *ctx = snd_soc_card_get_drvdata(card); + + if (ctx->quirks & QUIRK_PMC_PLT_CLK_0) + clk_disable_unprepare(ctx->mclk); + + return 0; +} + +static struct platform_driver snd_cht_mc_driver = { + .driver = { + .name = "cht-bsw-max98090", + }, + .probe = snd_cht_mc_probe, + .remove = snd_cht_mc_remove, +}; + +module_platform_driver(snd_cht_mc_driver) + +MODULE_DESCRIPTION("ASoC Intel(R) Braswell Machine driver"); +MODULE_AUTHOR("Fang, Yang A "); +MODULE_LICENSE("GPL v2"); +MODULE_ALIAS("platform:cht-bsw-max98090"); -- cgit v1.2.3