From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- sound/soc/pxa/mmp-sspa.c | 586 +++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 586 insertions(+) create mode 100644 sound/soc/pxa/mmp-sspa.c (limited to 'sound/soc/pxa/mmp-sspa.c') diff --git a/sound/soc/pxa/mmp-sspa.c b/sound/soc/pxa/mmp-sspa.c new file mode 100644 index 000000000..fb5a43904 --- /dev/null +++ b/sound/soc/pxa/mmp-sspa.c @@ -0,0 +1,586 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * linux/sound/soc/pxa/mmp-sspa.c + * Base on pxa2xx-ssp.c + * + * Copyright (C) 2011 Marvell International Ltd. + */ +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include +#include +#include +#include "mmp-sspa.h" + +/* + * SSPA audio private data + */ +struct sspa_priv { + void __iomem *tx_base; + void __iomem *rx_base; + + struct snd_dmaengine_dai_dma_data playback_dma_data; + struct snd_dmaengine_dai_dma_data capture_dma_data; + struct clk *clk; + struct clk *audio_clk; + struct clk *sysclk; + + int running_cnt; + u32 sp; + u32 ctrl; +}; + +static void mmp_sspa_tx_enable(struct sspa_priv *sspa) +{ + unsigned int sspa_sp = sspa->sp; + + sspa_sp &= ~SSPA_SP_MSL; + sspa_sp |= SSPA_SP_S_EN; + sspa_sp |= SSPA_SP_WEN; + __raw_writel(sspa_sp, sspa->tx_base + SSPA_SP); +} + +static void mmp_sspa_tx_disable(struct sspa_priv *sspa) +{ + unsigned int sspa_sp = sspa->sp; + + sspa_sp &= ~SSPA_SP_MSL; + sspa_sp &= ~SSPA_SP_S_EN; + sspa_sp |= SSPA_SP_WEN; + __raw_writel(sspa_sp, sspa->tx_base + SSPA_SP); +} + +static void mmp_sspa_rx_enable(struct sspa_priv *sspa) +{ + unsigned int sspa_sp = sspa->sp; + + sspa_sp |= SSPA_SP_S_EN; + sspa_sp |= SSPA_SP_WEN; + __raw_writel(sspa_sp, sspa->rx_base + SSPA_SP); +} + +static void mmp_sspa_rx_disable(struct sspa_priv *sspa) +{ + unsigned int sspa_sp = sspa->sp; + + sspa_sp &= ~SSPA_SP_S_EN; + sspa_sp |= SSPA_SP_WEN; + __raw_writel(sspa_sp, sspa->rx_base + SSPA_SP); +} + +static int mmp_sspa_startup(struct snd_pcm_substream *substream, + struct snd_soc_dai *dai) +{ + struct sspa_priv *sspa = snd_soc_dai_get_drvdata(dai); + + clk_prepare_enable(sspa->sysclk); + clk_prepare_enable(sspa->clk); + + return 0; +} + +static void mmp_sspa_shutdown(struct snd_pcm_substream *substream, + struct snd_soc_dai *dai) +{ + struct sspa_priv *sspa = snd_soc_dai_get_drvdata(dai); + + clk_disable_unprepare(sspa->clk); + clk_disable_unprepare(sspa->sysclk); +} + +/* + * Set the SSP ports SYSCLK. + */ +static int mmp_sspa_set_dai_sysclk(struct snd_soc_dai *cpu_dai, + int clk_id, unsigned int freq, int dir) +{ + struct sspa_priv *sspa = snd_soc_dai_get_drvdata(cpu_dai); + struct device *dev = cpu_dai->component->dev; + int ret = 0; + + if (dev->of_node) + return -ENOTSUPP; + + switch (clk_id) { + case MMP_SSPA_CLK_AUDIO: + ret = clk_set_rate(sspa->audio_clk, freq); + if (ret) + return ret; + break; + case MMP_SSPA_CLK_PLL: + case MMP_SSPA_CLK_VCXO: + /* not support yet */ + return -EINVAL; + default: + return -EINVAL; + } + + return 0; +} + +static int mmp_sspa_set_dai_pll(struct snd_soc_dai *cpu_dai, int pll_id, + int source, unsigned int freq_in, + unsigned int freq_out) +{ + struct sspa_priv *sspa = snd_soc_dai_get_drvdata(cpu_dai); + struct device *dev = cpu_dai->component->dev; + int ret = 0; + + if (dev->of_node) + return -ENOTSUPP; + + switch (pll_id) { + case MMP_SYSCLK: + ret = clk_set_rate(sspa->sysclk, freq_out); + if (ret) + return ret; + break; + case MMP_SSPA_CLK: + ret = clk_set_rate(sspa->clk, freq_out); + if (ret) + return ret; + break; + default: + return -ENODEV; + } + + return 0; +} + +/* + * Set up the sspa dai format. + */ +static int mmp_sspa_set_dai_fmt(struct snd_soc_dai *cpu_dai, + unsigned int fmt) +{ + struct sspa_priv *sspa = snd_soc_dai_get_drvdata(cpu_dai); + + /* reset port settings */ + sspa->sp = SSPA_SP_WEN | SSPA_SP_S_RST | SSPA_SP_FFLUSH; + sspa->ctrl = 0; + + switch (fmt & SND_SOC_DAIFMT_CLOCK_PROVIDER_MASK) { + case SND_SOC_DAIFMT_BP_FP: + sspa->sp |= SSPA_SP_MSL; + break; + case SND_SOC_DAIFMT_BC_FC: + break; + default: + return -EINVAL; + } + + switch (fmt & SND_SOC_DAIFMT_INV_MASK) { + case SND_SOC_DAIFMT_NB_NF: + sspa->sp |= SSPA_SP_FSP; + break; + default: + return -EINVAL; + } + + switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) { + case SND_SOC_DAIFMT_I2S: + sspa->ctrl |= SSPA_CTL_XDATDLY(1); + break; + default: + return -EINVAL; + } + + /* Since we are configuring the timings for the format by hand + * we have to defer some things until hw_params() where we + * know parameters like the sample size. + */ + return 0; +} + +/* + * Set the SSPA audio DMA parameters and sample size. + * Can be called multiple times by oss emulation. + */ +static int mmp_sspa_hw_params(struct snd_pcm_substream *substream, + struct snd_pcm_hw_params *params, + struct snd_soc_dai *dai) +{ + struct sspa_priv *sspa = snd_soc_dai_get_drvdata(dai); + struct device *dev = dai->component->dev; + u32 sspa_ctrl = sspa->ctrl; + int bits; + int bitval; + + switch (params_format(params)) { + case SNDRV_PCM_FORMAT_S8: + bits = 8; + bitval = SSPA_CTL_8_BITS; + break; + case SNDRV_PCM_FORMAT_S16_LE: + bits = 16; + bitval = SSPA_CTL_16_BITS; + break; + case SNDRV_PCM_FORMAT_S24_3LE: + bits = 24; + bitval = SSPA_CTL_24_BITS; + break; + case SNDRV_PCM_FORMAT_S32_LE: + bits = 32; + bitval = SSPA_CTL_32_BITS; + break; + default: + return -EINVAL; + } + + sspa_ctrl &= ~SSPA_CTL_XPH; + if (dev->of_node || params_channels(params) == 2) + sspa_ctrl |= SSPA_CTL_XPH; + + sspa_ctrl &= ~SSPA_CTL_XWDLEN1_MASK; + sspa_ctrl |= SSPA_CTL_XWDLEN1(bitval); + + sspa_ctrl &= ~SSPA_CTL_XWDLEN2_MASK; + sspa_ctrl |= SSPA_CTL_XWDLEN2(bitval); + + sspa_ctrl &= ~SSPA_CTL_XSSZ1_MASK; + sspa_ctrl |= SSPA_CTL_XSSZ1(bitval); + + sspa_ctrl &= ~SSPA_CTL_XSSZ2_MASK; + sspa_ctrl |= SSPA_CTL_XSSZ2(bitval); + + sspa->sp &= ~SSPA_SP_FWID_MASK; + sspa->sp |= SSPA_SP_FWID(bits - 1); + + sspa->sp &= ~SSPA_TXSP_FPER_MASK; + sspa->sp |= SSPA_TXSP_FPER(bits * 2 - 1); + + if (dev->of_node) { + clk_set_rate(sspa->clk, params_rate(params) * + params_channels(params) * bits); + } + + if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) { + __raw_writel(sspa_ctrl, sspa->tx_base + SSPA_CTL); + __raw_writel(0x1, sspa->tx_base + SSPA_FIFO_UL); + } else { + __raw_writel(sspa_ctrl, sspa->rx_base + SSPA_CTL); + __raw_writel(0x0, sspa->rx_base + SSPA_FIFO_UL); + } + + return 0; +} + +static int mmp_sspa_trigger(struct snd_pcm_substream *substream, int cmd, + struct snd_soc_dai *dai) +{ + struct sspa_priv *sspa = snd_soc_dai_get_drvdata(dai); + int ret = 0; + + switch (cmd) { + case SNDRV_PCM_TRIGGER_START: + case SNDRV_PCM_TRIGGER_RESUME: + case SNDRV_PCM_TRIGGER_PAUSE_RELEASE: + /* + * whatever playback or capture, must enable rx. + * this is a hw issue, so need check if rx has been + * enabled or not; if has been enabled by another + * stream, do not enable again. + */ + if (!sspa->running_cnt) + mmp_sspa_rx_enable(sspa); + + if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) + mmp_sspa_tx_enable(sspa); + + sspa->running_cnt++; + break; + + case SNDRV_PCM_TRIGGER_STOP: + case SNDRV_PCM_TRIGGER_SUSPEND: + case SNDRV_PCM_TRIGGER_PAUSE_PUSH: + sspa->running_cnt--; + + if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) + mmp_sspa_tx_disable(sspa); + + /* have no capture stream, disable rx port */ + if (!sspa->running_cnt) + mmp_sspa_rx_disable(sspa); + break; + + default: + ret = -EINVAL; + } + + return ret; +} + +static int mmp_sspa_probe(struct snd_soc_dai *dai) +{ + struct sspa_priv *sspa = dev_get_drvdata(dai->dev); + + snd_soc_dai_init_dma_data(dai, + &sspa->playback_dma_data, + &sspa->capture_dma_data); + + return 0; +} + +#define MMP_SSPA_RATES SNDRV_PCM_RATE_8000_192000 +#define MMP_SSPA_FORMATS (SNDRV_PCM_FMTBIT_S8 | \ + SNDRV_PCM_FMTBIT_S16_LE | \ + SNDRV_PCM_FMTBIT_S24_3LE | \ + SNDRV_PCM_FMTBIT_S32_LE) + +static const struct snd_soc_dai_ops mmp_sspa_dai_ops = { + .startup = mmp_sspa_startup, + .shutdown = mmp_sspa_shutdown, + .trigger = mmp_sspa_trigger, + .hw_params = mmp_sspa_hw_params, + .set_sysclk = mmp_sspa_set_dai_sysclk, + .set_pll = mmp_sspa_set_dai_pll, + .set_fmt = mmp_sspa_set_dai_fmt, +}; + +static struct snd_soc_dai_driver mmp_sspa_dai = { + .probe = mmp_sspa_probe, + .playback = { + .channels_min = 1, + .channels_max = 128, + .rates = MMP_SSPA_RATES, + .formats = MMP_SSPA_FORMATS, + }, + .capture = { + .channels_min = 1, + .channels_max = 2, + .rates = MMP_SSPA_RATES, + .formats = MMP_SSPA_FORMATS, + }, + .ops = &mmp_sspa_dai_ops, +}; + +#define MMP_PCM_INFO (SNDRV_PCM_INFO_MMAP | \ + SNDRV_PCM_INFO_MMAP_VALID | \ + SNDRV_PCM_INFO_INTERLEAVED | \ + SNDRV_PCM_INFO_PAUSE | \ + SNDRV_PCM_INFO_RESUME | \ + SNDRV_PCM_INFO_NO_PERIOD_WAKEUP) + +static const struct snd_pcm_hardware mmp_pcm_hardware[] = { + { + .info = MMP_PCM_INFO, + .period_bytes_min = 1024, + .period_bytes_max = 2048, + .periods_min = 2, + .periods_max = 32, + .buffer_bytes_max = 4096, + .fifo_size = 32, + }, + { + .info = MMP_PCM_INFO, + .period_bytes_min = 1024, + .period_bytes_max = 2048, + .periods_min = 2, + .periods_max = 32, + .buffer_bytes_max = 4096, + .fifo_size = 32, + }, +}; + +static const struct snd_dmaengine_pcm_config mmp_pcm_config = { + .prepare_slave_config = snd_dmaengine_pcm_prepare_slave_config, + .pcm_hardware = mmp_pcm_hardware, + .prealloc_buffer_size = 4096, +}; + +static int mmp_pcm_mmap(struct snd_soc_component *component, + struct snd_pcm_substream *substream, + struct vm_area_struct *vma) +{ + vma->vm_flags |= VM_DONTEXPAND | VM_DONTDUMP; + vma->vm_page_prot = pgprot_noncached(vma->vm_page_prot); + return remap_pfn_range(vma, vma->vm_start, + substream->dma_buffer.addr >> PAGE_SHIFT, + vma->vm_end - vma->vm_start, vma->vm_page_prot); +} + +static int mmp_sspa_open(struct snd_soc_component *component, + struct snd_pcm_substream *substream) +{ + struct sspa_priv *sspa = snd_soc_component_get_drvdata(component); + + pm_runtime_get_sync(component->dev); + + /* we can only change the settings if the port is not in use */ + if ((__raw_readl(sspa->tx_base + SSPA_SP) & SSPA_SP_S_EN) || + (__raw_readl(sspa->rx_base + SSPA_SP) & SSPA_SP_S_EN)) { + dev_err(component->dev, + "can't change hardware dai format: stream is in use\n"); + return -EBUSY; + } + + __raw_writel(sspa->sp, sspa->tx_base + SSPA_SP); + __raw_writel(sspa->sp, sspa->rx_base + SSPA_SP); + + sspa->sp &= ~(SSPA_SP_S_RST | SSPA_SP_FFLUSH); + __raw_writel(sspa->sp, sspa->tx_base + SSPA_SP); + __raw_writel(sspa->sp, sspa->rx_base + SSPA_SP); + + /* + * FIXME: hw issue, for the tx serial port, + * can not config the master/slave mode; + * so must clean this bit. + * The master/slave mode has been set in the + * rx port. + */ + __raw_writel(sspa->sp & ~SSPA_SP_MSL, sspa->tx_base + SSPA_SP); + + __raw_writel(sspa->ctrl, sspa->tx_base + SSPA_CTL); + __raw_writel(sspa->ctrl, sspa->rx_base + SSPA_CTL); + + return 0; +} + +static int mmp_sspa_close(struct snd_soc_component *component, + struct snd_pcm_substream *substream) +{ + pm_runtime_put_sync(component->dev); + return 0; +} + +static const struct snd_soc_component_driver mmp_sspa_component = { + .name = "mmp-sspa", + .mmap = mmp_pcm_mmap, + .open = mmp_sspa_open, + .close = mmp_sspa_close, + .legacy_dai_naming = 1, +}; + +static int asoc_mmp_sspa_probe(struct platform_device *pdev) +{ + struct sspa_priv *sspa; + int ret; + + sspa = devm_kzalloc(&pdev->dev, + sizeof(struct sspa_priv), GFP_KERNEL); + if (!sspa) + return -ENOMEM; + + if (pdev->dev.of_node) { + sspa->rx_base = devm_platform_ioremap_resource(pdev, 0); + if (IS_ERR(sspa->rx_base)) + return PTR_ERR(sspa->rx_base); + + sspa->tx_base = devm_platform_ioremap_resource(pdev, 1); + if (IS_ERR(sspa->tx_base)) + return PTR_ERR(sspa->tx_base); + + sspa->clk = devm_clk_get(&pdev->dev, "bitclk"); + if (IS_ERR(sspa->clk)) + return PTR_ERR(sspa->clk); + + sspa->audio_clk = devm_clk_get(&pdev->dev, "audio"); + if (IS_ERR(sspa->audio_clk)) + return PTR_ERR(sspa->audio_clk); + } else { + struct resource *res; + + res = platform_get_resource(pdev, IORESOURCE_IO, 0); + if (res == NULL) + return -ENODEV; + + sspa->rx_base = devm_ioremap(&pdev->dev, res->start, 0x30); + if (!sspa->rx_base) + return -ENOMEM; + + sspa->tx_base = devm_ioremap(&pdev->dev, + res->start + 0x80, 0x30); + if (!sspa->tx_base) + return -ENOMEM; + + sspa->clk = devm_clk_get(&pdev->dev, NULL); + if (IS_ERR(sspa->clk)) + return PTR_ERR(sspa->clk); + + sspa->audio_clk = clk_get(NULL, "mmp-audio"); + if (IS_ERR(sspa->audio_clk)) + return PTR_ERR(sspa->audio_clk); + + sspa->sysclk = clk_get(NULL, "mmp-sysclk"); + if (IS_ERR(sspa->sysclk)) { + clk_put(sspa->audio_clk); + return PTR_ERR(sspa->sysclk); + } + } + platform_set_drvdata(pdev, sspa); + + sspa->playback_dma_data.maxburst = 4; + sspa->capture_dma_data.maxburst = 4; + /* You know, these addresses are actually ignored. */ + sspa->capture_dma_data.addr = SSPA_D; + sspa->playback_dma_data.addr = 0x80 + SSPA_D; + + if (pdev->dev.of_node) { + ret = devm_snd_dmaengine_pcm_register(&pdev->dev, + &mmp_pcm_config, 0); + if (ret) + return ret; + } + + ret = devm_snd_soc_register_component(&pdev->dev, &mmp_sspa_component, + &mmp_sspa_dai, 1); + if (ret) + return ret; + + pm_runtime_enable(&pdev->dev); + clk_prepare_enable(sspa->audio_clk); + + return 0; +} + +static int asoc_mmp_sspa_remove(struct platform_device *pdev) +{ + struct sspa_priv *sspa = platform_get_drvdata(pdev); + + clk_disable_unprepare(sspa->audio_clk); + pm_runtime_disable(&pdev->dev); + + if (pdev->dev.of_node) + return 0; + + clk_put(sspa->audio_clk); + clk_put(sspa->sysclk); + return 0; +} + +#ifdef CONFIG_OF +static const struct of_device_id mmp_sspa_of_match[] = { + { .compatible = "marvell,mmp-sspa" }, + {}, +}; + +MODULE_DEVICE_TABLE(of, mmp_sspa_of_match); +#endif + +static struct platform_driver asoc_mmp_sspa_driver = { + .driver = { + .name = "mmp-sspa-dai", + .of_match_table = of_match_ptr(mmp_sspa_of_match), + }, + .probe = asoc_mmp_sspa_probe, + .remove = asoc_mmp_sspa_remove, +}; + +module_platform_driver(asoc_mmp_sspa_driver); + +MODULE_AUTHOR("Leo Yan "); +MODULE_DESCRIPTION("MMP SSPA SoC Interface"); +MODULE_LICENSE("GPL"); +MODULE_ALIAS("platform:mmp-sspa-dai"); -- cgit v1.2.3