From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- sound/soc/qcom/qdsp6/q6apm-lpass-dais.c | 260 ++++++++++++++++++++++++++++++++ 1 file changed, 260 insertions(+) create mode 100644 sound/soc/qcom/qdsp6/q6apm-lpass-dais.c (limited to 'sound/soc/qcom/qdsp6/q6apm-lpass-dais.c') diff --git a/sound/soc/qcom/qdsp6/q6apm-lpass-dais.c b/sound/soc/qcom/qdsp6/q6apm-lpass-dais.c new file mode 100644 index 000000000..ce9e5646d --- /dev/null +++ b/sound/soc/qcom/qdsp6/q6apm-lpass-dais.c @@ -0,0 +1,260 @@ +// SPDX-License-Identifier: GPL-2.0 +// Copyright (c) 2021, Linaro Limited + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include "q6dsp-lpass-ports.h" +#include "audioreach.h" +#include "q6apm.h" + +#define AUDIOREACH_BE_PCM_BASE 16 + +struct q6apm_lpass_dai_data { + struct q6apm_graph *graph[APM_PORT_MAX]; + bool is_port_started[APM_PORT_MAX]; + struct audioreach_module_config module_config[APM_PORT_MAX]; +}; + +static int q6dma_set_channel_map(struct snd_soc_dai *dai, + unsigned int tx_num, unsigned int *tx_ch_mask, + unsigned int rx_num, unsigned int *rx_ch_mask) +{ + + struct q6apm_lpass_dai_data *dai_data = dev_get_drvdata(dai->dev); + struct audioreach_module_config *cfg = &dai_data->module_config[dai->id]; + int ch_mask; + + switch (dai->id) { + case WSA_CODEC_DMA_TX_0: + case WSA_CODEC_DMA_TX_1: + case WSA_CODEC_DMA_TX_2: + case VA_CODEC_DMA_TX_0: + case VA_CODEC_DMA_TX_1: + case VA_CODEC_DMA_TX_2: + case TX_CODEC_DMA_TX_0: + case TX_CODEC_DMA_TX_1: + case TX_CODEC_DMA_TX_2: + case TX_CODEC_DMA_TX_3: + case TX_CODEC_DMA_TX_4: + case TX_CODEC_DMA_TX_5: + if (!tx_ch_mask) { + dev_err(dai->dev, "tx slot not found\n"); + return -EINVAL; + } + + if (tx_num > AR_PCM_MAX_NUM_CHANNEL) { + dev_err(dai->dev, "invalid tx num %d\n", + tx_num); + return -EINVAL; + } + ch_mask = *tx_ch_mask; + + break; + case WSA_CODEC_DMA_RX_0: + case WSA_CODEC_DMA_RX_1: + case RX_CODEC_DMA_RX_0: + case RX_CODEC_DMA_RX_1: + case RX_CODEC_DMA_RX_2: + case RX_CODEC_DMA_RX_3: + case RX_CODEC_DMA_RX_4: + case RX_CODEC_DMA_RX_5: + case RX_CODEC_DMA_RX_6: + case RX_CODEC_DMA_RX_7: + /* rx */ + if (!rx_ch_mask) { + dev_err(dai->dev, "rx slot not found\n"); + return -EINVAL; + } + if (rx_num > APM_PORT_MAX_AUDIO_CHAN_CNT) { + dev_err(dai->dev, "invalid rx num %d\n", + rx_num); + return -EINVAL; + } + ch_mask = *rx_ch_mask; + + break; + default: + dev_err(dai->dev, "%s: invalid dai id 0x%x\n", + __func__, dai->id); + return -EINVAL; + } + + cfg->active_channels_mask = ch_mask; + + return 0; +} + +static int q6dma_hw_params(struct snd_pcm_substream *substream, + struct snd_pcm_hw_params *params, struct snd_soc_dai *dai) +{ + struct q6apm_lpass_dai_data *dai_data = dev_get_drvdata(dai->dev); + struct audioreach_module_config *cfg = &dai_data->module_config[dai->id]; + + cfg->bit_width = params_width(params); + cfg->sample_rate = params_rate(params); + cfg->num_channels = params_channels(params); + + return 0; +} + +static void q6apm_lpass_dai_shutdown(struct snd_pcm_substream *substream, struct snd_soc_dai *dai) +{ + struct q6apm_lpass_dai_data *dai_data = dev_get_drvdata(dai->dev); + int rc; + + if (!dai_data->is_port_started[dai->id]) + return; + rc = q6apm_graph_stop(dai_data->graph[dai->id]); + if (rc < 0) + dev_err(dai->dev, "fail to close APM port (%d)\n", rc); + + q6apm_graph_close(dai_data->graph[dai->id]); + dai_data->is_port_started[dai->id] = false; +} + +static int q6apm_lpass_dai_prepare(struct snd_pcm_substream *substream, struct snd_soc_dai *dai) +{ + struct q6apm_lpass_dai_data *dai_data = dev_get_drvdata(dai->dev); + struct audioreach_module_config *cfg = &dai_data->module_config[dai->id]; + struct q6apm_graph *graph; + int graph_id = dai->id; + int rc; + + /** + * It is recommend to load DSP with source graph first and then sink + * graph, so sequence for playback and capture will be different + */ + if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) { + graph = q6apm_graph_open(dai->dev, NULL, dai->dev, graph_id); + if (IS_ERR(graph)) { + dev_err(dai->dev, "Failed to open graph (%d)\n", graph_id); + rc = PTR_ERR(graph); + return rc; + } + dai_data->graph[graph_id] = graph; + } + + cfg->direction = substream->stream; + rc = q6apm_graph_media_format_pcm(dai_data->graph[dai->id], cfg); + + if (rc) { + dev_err(dai->dev, "Failed to set media format %d\n", rc); + return rc; + } + + rc = q6apm_graph_prepare(dai_data->graph[dai->id]); + if (rc) { + dev_err(dai->dev, "Failed to prepare Graph %d\n", rc); + return rc; + } + + rc = q6apm_graph_start(dai_data->graph[dai->id]); + if (rc < 0) { + dev_err(dai->dev, "fail to start APM port %x\n", dai->id); + return rc; + } + dai_data->is_port_started[dai->id] = true; + + return 0; +} + +static int q6apm_lpass_dai_startup(struct snd_pcm_substream *substream, struct snd_soc_dai *dai) +{ + struct q6apm_lpass_dai_data *dai_data = dev_get_drvdata(dai->dev); + struct q6apm_graph *graph; + int graph_id = dai->id; + + if (substream->stream == SNDRV_PCM_STREAM_CAPTURE) { + graph = q6apm_graph_open(dai->dev, NULL, dai->dev, graph_id); + if (IS_ERR(graph)) { + dev_err(dai->dev, "Failed to open graph (%d)\n", graph_id); + return PTR_ERR(graph); + } + dai_data->graph[graph_id] = graph; + } + + return 0; +} + +static int q6i2s_set_fmt(struct snd_soc_dai *dai, unsigned int fmt) +{ + struct q6apm_lpass_dai_data *dai_data = dev_get_drvdata(dai->dev); + struct audioreach_module_config *cfg = &dai_data->module_config[dai->id]; + + cfg->fmt = fmt; + + return 0; +} + +static const struct snd_soc_dai_ops q6dma_ops = { + .prepare = q6apm_lpass_dai_prepare, + .startup = q6apm_lpass_dai_startup, + .shutdown = q6apm_lpass_dai_shutdown, + .set_channel_map = q6dma_set_channel_map, + .hw_params = q6dma_hw_params, +}; + +static const struct snd_soc_dai_ops q6i2s_ops = { + .prepare = q6apm_lpass_dai_prepare, + .startup = q6apm_lpass_dai_startup, + .shutdown = q6apm_lpass_dai_shutdown, + .set_channel_map = q6dma_set_channel_map, + .hw_params = q6dma_hw_params, + .set_fmt = q6i2s_set_fmt, +}; + +static const struct snd_soc_component_driver q6apm_lpass_dai_component = { + .name = "q6apm-be-dai-component", + .of_xlate_dai_name = q6dsp_audio_ports_of_xlate_dai_name, + .be_pcm_base = AUDIOREACH_BE_PCM_BASE, + .use_dai_pcm_id = true, +}; + +static int q6apm_lpass_dai_dev_probe(struct platform_device *pdev) +{ + struct q6dsp_audio_port_dai_driver_config cfg; + struct q6apm_lpass_dai_data *dai_data; + struct snd_soc_dai_driver *dais; + struct device *dev = &pdev->dev; + int num_dais; + + dai_data = devm_kzalloc(dev, sizeof(*dai_data), GFP_KERNEL); + if (!dai_data) + return -ENOMEM; + + dev_set_drvdata(dev, dai_data); + + memset(&cfg, 0, sizeof(cfg)); + cfg.q6i2s_ops = &q6i2s_ops; + cfg.q6dma_ops = &q6dma_ops; + dais = q6dsp_audio_ports_set_config(dev, &cfg, &num_dais); + + return devm_snd_soc_register_component(dev, &q6apm_lpass_dai_component, dais, num_dais); +} + +#ifdef CONFIG_OF +static const struct of_device_id q6apm_lpass_dai_device_id[] = { + { .compatible = "qcom,q6apm-lpass-dais" }, + {}, +}; +MODULE_DEVICE_TABLE(of, q6apm_lpass_dai_device_id); +#endif + +static struct platform_driver q6apm_lpass_dai_platform_driver = { + .driver = { + .name = "q6apm-lpass-dais", + .of_match_table = of_match_ptr(q6apm_lpass_dai_device_id), + }, + .probe = q6apm_lpass_dai_dev_probe, +}; +module_platform_driver(q6apm_lpass_dai_platform_driver); + +MODULE_DESCRIPTION("AUDIOREACH APM LPASS dai driver"); +MODULE_LICENSE("GPL"); -- cgit v1.2.3