From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- sound/soc/samsung/arndale.c | 218 ++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 218 insertions(+) create mode 100644 sound/soc/samsung/arndale.c (limited to 'sound/soc/samsung/arndale.c') diff --git a/sound/soc/samsung/arndale.c b/sound/soc/samsung/arndale.c new file mode 100644 index 000000000..a5dc640d0 --- /dev/null +++ b/sound/soc/samsung/arndale.c @@ -0,0 +1,218 @@ +// SPDX-License-Identifier: GPL-2.0+ +// +// Copyright (c) 2014, Insignal Co., Ltd. +// +// Author: Claude + +#include +#include +#include +#include + +#include +#include +#include +#include + +#include "../codecs/wm8994.h" +#include "i2s.h" + +static int arndale_rt5631_hw_params(struct snd_pcm_substream *substream, + struct snd_pcm_hw_params *params) +{ + struct snd_soc_pcm_runtime *rtd = asoc_substream_to_rtd(substream); + struct snd_soc_dai *cpu_dai = asoc_rtd_to_cpu(rtd, 0); + struct snd_soc_dai *codec_dai = asoc_rtd_to_codec(rtd, 0); + int rfs, ret; + unsigned long rclk; + + rfs = 256; + + rclk = params_rate(params) * rfs; + + ret = snd_soc_dai_set_sysclk(cpu_dai, SAMSUNG_I2S_CDCLK, + 0, SND_SOC_CLOCK_OUT); + if (ret < 0) + return ret; + + ret = snd_soc_dai_set_sysclk(cpu_dai, SAMSUNG_I2S_RCLKSRC_0, + 0, SND_SOC_CLOCK_OUT); + + if (ret < 0) + return ret; + + ret = snd_soc_dai_set_sysclk(codec_dai, 0, rclk, SND_SOC_CLOCK_OUT); + if (ret < 0) + return ret; + + return 0; +} + +static const struct snd_soc_ops arndale_rt5631_ops = { + .hw_params = arndale_rt5631_hw_params, +}; + +static int arndale_wm1811_hw_params(struct snd_pcm_substream *substream, + struct snd_pcm_hw_params *params) +{ + struct snd_soc_pcm_runtime *rtd = asoc_substream_to_rtd(substream); + struct snd_soc_dai *codec_dai = asoc_rtd_to_codec(rtd, 0); + unsigned int rfs, rclk; + + /* Ensure AIF1CLK is >= 3 MHz for optimal performance */ + if (params_width(params) == 24) + rfs = 384; + else if (params_rate(params) == 8000 || params_rate(params) == 11025) + rfs = 512; + else + rfs = 256; + + rclk = params_rate(params) * rfs; + + /* + * We add 1 to the frequency value to ensure proper EPLL setting + * for each audio sampling rate (see epll_24mhz_tbl in drivers/clk/ + * samsung/clk-exynos5250.c for list of available EPLL rates). + * The CODEC uses clk API and the value will be rounded hence the MCLK1 + * clock's frequency will still be exact multiple of the sample rate. + */ + return snd_soc_dai_set_sysclk(codec_dai, WM8994_SYSCLK_MCLK1, + rclk + 1, SND_SOC_CLOCK_IN); +} + +static const struct snd_soc_ops arndale_wm1811_ops = { + .hw_params = arndale_wm1811_hw_params, +}; + +SND_SOC_DAILINK_DEFS(rt5631_hifi, + DAILINK_COMP_ARRAY(COMP_EMPTY()), + DAILINK_COMP_ARRAY(COMP_CODEC(NULL, "rt5631-aif1")), + DAILINK_COMP_ARRAY(COMP_EMPTY())); + +static struct snd_soc_dai_link arndale_rt5631_dai[] = { + { + .name = "RT5631 HiFi", + .stream_name = "Primary", + .dai_fmt = SND_SOC_DAIFMT_I2S + | SND_SOC_DAIFMT_NB_NF + | SND_SOC_DAIFMT_CBS_CFS, + .ops = &arndale_rt5631_ops, + SND_SOC_DAILINK_REG(rt5631_hifi), + }, +}; + +SND_SOC_DAILINK_DEFS(wm1811_hifi, + DAILINK_COMP_ARRAY(COMP_EMPTY()), + DAILINK_COMP_ARRAY(COMP_CODEC(NULL, "wm8994-aif1")), + DAILINK_COMP_ARRAY(COMP_EMPTY())); + +static struct snd_soc_dai_link arndale_wm1811_dai[] = { + { + .name = "WM1811 HiFi", + .stream_name = "Primary", + .dai_fmt = SND_SOC_DAIFMT_I2S + | SND_SOC_DAIFMT_NB_NF + | SND_SOC_DAIFMT_CBM_CFM, + .ops = &arndale_wm1811_ops, + SND_SOC_DAILINK_REG(wm1811_hifi), + }, +}; + +static struct snd_soc_card arndale_rt5631 = { + .name = "Arndale RT5631", + .owner = THIS_MODULE, + .dai_link = arndale_rt5631_dai, + .num_links = ARRAY_SIZE(arndale_rt5631_dai), +}; + +static struct snd_soc_card arndale_wm1811 = { + .name = "Arndale WM1811", + .owner = THIS_MODULE, + .dai_link = arndale_wm1811_dai, + .num_links = ARRAY_SIZE(arndale_wm1811_dai), +}; + +static void arndale_put_of_nodes(struct snd_soc_card *card) +{ + struct snd_soc_dai_link *dai_link; + int i; + + for_each_card_prelinks(card, i, dai_link) { + of_node_put(dai_link->cpus->of_node); + of_node_put(dai_link->codecs->of_node); + } +} + +static int arndale_audio_probe(struct platform_device *pdev) +{ + struct device_node *np = pdev->dev.of_node; + struct snd_soc_card *card; + struct snd_soc_dai_link *dai_link; + int ret; + + card = (struct snd_soc_card *)of_device_get_match_data(&pdev->dev); + card->dev = &pdev->dev; + dai_link = card->dai_link; + + dai_link->cpus->of_node = of_parse_phandle(np, "samsung,audio-cpu", 0); + if (!dai_link->cpus->of_node) { + dev_err(&pdev->dev, + "Property 'samsung,audio-cpu' missing or invalid\n"); + return -EINVAL; + } + + if (!dai_link->platforms->name) + dai_link->platforms->of_node = dai_link->cpus->of_node; + + dai_link->codecs->of_node = of_parse_phandle(np, "samsung,audio-codec", 0); + if (!dai_link->codecs->of_node) { + dev_err(&pdev->dev, + "Property 'samsung,audio-codec' missing or invalid\n"); + ret = -EINVAL; + goto err_put_of_nodes; + } + + ret = devm_snd_soc_register_card(card->dev, card); + if (ret) { + dev_err_probe(&pdev->dev, ret, + "snd_soc_register_card() failed\n"); + goto err_put_of_nodes; + } + return 0; + +err_put_of_nodes: + arndale_put_of_nodes(card); + return ret; +} + +static int arndale_audio_remove(struct platform_device *pdev) +{ + struct snd_soc_card *card = platform_get_drvdata(pdev); + + arndale_put_of_nodes(card); + return 0; +} + +static const struct of_device_id arndale_audio_of_match[] = { + { .compatible = "samsung,arndale-rt5631", .data = &arndale_rt5631 }, + { .compatible = "samsung,arndale-alc5631", .data = &arndale_rt5631 }, + { .compatible = "samsung,arndale-wm1811", .data = &arndale_wm1811 }, + {}, +}; +MODULE_DEVICE_TABLE(of, arndale_audio_of_match); + +static struct platform_driver arndale_audio_driver = { + .driver = { + .name = "arndale-audio", + .pm = &snd_soc_pm_ops, + .of_match_table = arndale_audio_of_match, + }, + .probe = arndale_audio_probe, + .remove = arndale_audio_remove, +}; + +module_platform_driver(arndale_audio_driver); + +MODULE_AUTHOR("Claude "); +MODULE_DESCRIPTION("ALSA SoC Driver for Arndale Board"); +MODULE_LICENSE("GPL"); -- cgit v1.2.3