From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- sound/soc/samsung/odroid.c | 367 +++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 367 insertions(+) create mode 100644 sound/soc/samsung/odroid.c (limited to 'sound/soc/samsung/odroid.c') diff --git a/sound/soc/samsung/odroid.c b/sound/soc/samsung/odroid.c new file mode 100644 index 000000000..1e0fefa89 --- /dev/null +++ b/sound/soc/samsung/odroid.c @@ -0,0 +1,367 @@ +// SPDX-License-Identifier: GPL-2.0 +// +// Copyright (C) 2017 Samsung Electronics Co., Ltd. + +#include +#include +#include +#include +#include +#include +#include +#include "i2s.h" +#include "i2s-regs.h" + +struct odroid_priv { + struct snd_soc_card card; + struct clk *clk_i2s_bus; + struct clk *sclk_i2s; + + /* Spinlock protecting fields below */ + spinlock_t lock; + unsigned int be_sample_rate; + bool be_active; +}; + +static int odroid_card_fe_startup(struct snd_pcm_substream *substream) +{ + struct snd_pcm_runtime *runtime = substream->runtime; + + snd_pcm_hw_constraint_single(runtime, SNDRV_PCM_HW_PARAM_CHANNELS, 2); + + return 0; +} + +static int odroid_card_fe_hw_params(struct snd_pcm_substream *substream, + struct snd_pcm_hw_params *params) +{ + struct snd_soc_pcm_runtime *rtd = asoc_substream_to_rtd(substream); + struct odroid_priv *priv = snd_soc_card_get_drvdata(rtd->card); + unsigned long flags; + int ret = 0; + + spin_lock_irqsave(&priv->lock, flags); + if (priv->be_active && priv->be_sample_rate != params_rate(params)) + ret = -EINVAL; + spin_unlock_irqrestore(&priv->lock, flags); + + return ret; +} + +static const struct snd_soc_ops odroid_card_fe_ops = { + .startup = odroid_card_fe_startup, + .hw_params = odroid_card_fe_hw_params, +}; + +static int odroid_card_be_hw_params(struct snd_pcm_substream *substream, + struct snd_pcm_hw_params *params) +{ + struct snd_soc_pcm_runtime *rtd = asoc_substream_to_rtd(substream); + struct odroid_priv *priv = snd_soc_card_get_drvdata(rtd->card); + unsigned int pll_freq, rclk_freq, rfs; + unsigned long flags; + int ret; + + switch (params_rate(params)) { + case 64000: + pll_freq = 196608001U; + rfs = 384; + break; + case 44100: + case 88200: + pll_freq = 180633609U; + rfs = 512; + break; + case 32000: + case 48000: + case 96000: + pll_freq = 196608001U; + rfs = 512; + break; + default: + return -EINVAL; + } + + ret = clk_set_rate(priv->clk_i2s_bus, pll_freq / 2 + 1); + if (ret < 0) + return ret; + + /* + * We add 2 to the rclk_freq value in order to avoid too low clock + * frequency values due to the EPLL output frequency not being exact + * multiple of the audio sampling rate. + */ + rclk_freq = params_rate(params) * rfs + 2; + + ret = clk_set_rate(priv->sclk_i2s, rclk_freq); + if (ret < 0) + return ret; + + if (rtd->dai_link->num_codecs > 1) { + struct snd_soc_dai *codec_dai = asoc_rtd_to_codec(rtd, 1); + + ret = snd_soc_dai_set_sysclk(codec_dai, 0, rclk_freq, + SND_SOC_CLOCK_IN); + if (ret < 0) + return ret; + } + + spin_lock_irqsave(&priv->lock, flags); + priv->be_sample_rate = params_rate(params); + spin_unlock_irqrestore(&priv->lock, flags); + + return 0; +} + +static int odroid_card_be_trigger(struct snd_pcm_substream *substream, int cmd) +{ + struct snd_soc_pcm_runtime *rtd = asoc_substream_to_rtd(substream); + struct odroid_priv *priv = snd_soc_card_get_drvdata(rtd->card); + unsigned long flags; + + spin_lock_irqsave(&priv->lock, flags); + + switch (cmd) { + case SNDRV_PCM_TRIGGER_START: + case SNDRV_PCM_TRIGGER_RESUME: + case SNDRV_PCM_TRIGGER_PAUSE_RELEASE: + priv->be_active = true; + break; + + case SNDRV_PCM_TRIGGER_STOP: + case SNDRV_PCM_TRIGGER_SUSPEND: + case SNDRV_PCM_TRIGGER_PAUSE_PUSH: + priv->be_active = false; + break; + } + + spin_unlock_irqrestore(&priv->lock, flags); + + return 0; +} + +static const struct snd_soc_ops odroid_card_be_ops = { + .hw_params = odroid_card_be_hw_params, + .trigger = odroid_card_be_trigger, +}; + +/* DAPM routes for backward compatibility with old DTS */ +static const struct snd_soc_dapm_route odroid_dapm_routes[] = { + { "I2S Playback", NULL, "Mixer DAI TX" }, + { "HiFi Playback", NULL, "Mixer DAI TX" }, +}; + +SND_SOC_DAILINK_DEFS(primary, + DAILINK_COMP_ARRAY(COMP_EMPTY()), + DAILINK_COMP_ARRAY(COMP_DUMMY()), + DAILINK_COMP_ARRAY(COMP_PLATFORM("3830000.i2s"))); + +SND_SOC_DAILINK_DEFS(mixer, + DAILINK_COMP_ARRAY(COMP_DUMMY()), + DAILINK_COMP_ARRAY(COMP_EMPTY()), + DAILINK_COMP_ARRAY(COMP_DUMMY())); + +SND_SOC_DAILINK_DEFS(secondary, + DAILINK_COMP_ARRAY(COMP_EMPTY()), + DAILINK_COMP_ARRAY(COMP_DUMMY()), + DAILINK_COMP_ARRAY(COMP_PLATFORM("3830000.i2s-sec"))); + +static struct snd_soc_dai_link odroid_card_dais[] = { + { + /* Primary FE <-> BE link */ + .ops = &odroid_card_fe_ops, + .name = "Primary", + .stream_name = "Primary", + .dynamic = 1, + .dpcm_playback = 1, + SND_SOC_DAILINK_REG(primary), + }, { + /* BE <-> CODECs link */ + .name = "I2S Mixer", + .ops = &odroid_card_be_ops, + .no_pcm = 1, + .dpcm_playback = 1, + .dai_fmt = SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_NB_NF | + SND_SOC_DAIFMT_CBS_CFS, + SND_SOC_DAILINK_REG(mixer), + }, { + /* Secondary FE <-> BE link */ + .playback_only = 1, + .ops = &odroid_card_fe_ops, + .name = "Secondary", + .stream_name = "Secondary", + .dynamic = 1, + .dpcm_playback = 1, + SND_SOC_DAILINK_REG(secondary), + } +}; + +static int odroid_audio_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct device_node *cpu_dai = NULL; + struct device_node *cpu, *codec; + struct odroid_priv *priv; + struct snd_soc_card *card; + struct snd_soc_dai_link *link, *codec_link; + int num_pcms, ret, i; + struct of_phandle_args args = {}; + + priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL); + if (!priv) + return -ENOMEM; + + card = &priv->card; + card->dev = dev; + + card->owner = THIS_MODULE; + card->fully_routed = true; + + spin_lock_init(&priv->lock); + snd_soc_card_set_drvdata(card, priv); + + ret = snd_soc_of_parse_card_name(card, "model"); + if (ret < 0) + return ret; + + if (of_property_read_bool(dev->of_node, "samsung,audio-widgets")) { + ret = snd_soc_of_parse_audio_simple_widgets(card, + "samsung,audio-widgets"); + if (ret < 0) + return ret; + } + + if (of_property_read_bool(dev->of_node, "samsung,audio-routing")) { + ret = snd_soc_of_parse_audio_routing(card, + "samsung,audio-routing"); + if (ret < 0) + return ret; + } + + card->dai_link = odroid_card_dais; + card->num_links = ARRAY_SIZE(odroid_card_dais); + + cpu = of_get_child_by_name(dev->of_node, "cpu"); + codec = of_get_child_by_name(dev->of_node, "codec"); + link = card->dai_link; + codec_link = &card->dai_link[1]; + + /* + * For backwards compatibility create the secondary CPU DAI link only + * if there are 2 CPU DAI entries in the cpu sound-dai property in DT. + * Also add required DAPM routes not available in old DTS. + */ + num_pcms = of_count_phandle_with_args(cpu, "sound-dai", + "#sound-dai-cells"); + if (num_pcms == 1) { + card->dapm_routes = odroid_dapm_routes; + card->num_dapm_routes = ARRAY_SIZE(odroid_dapm_routes); + card->num_links--; + } + + for (i = 0; i < num_pcms; i++, link += 2) { + ret = of_parse_phandle_with_args(cpu, "sound-dai", + "#sound-dai-cells", i, &args); + if (ret < 0) + break; + + if (!args.np) { + dev_err(dev, "sound-dai property parse error: %d\n", ret); + ret = -EINVAL; + break; + } + + ret = snd_soc_get_dai_name(&args, &link->cpus->dai_name); + of_node_put(args.np); + + if (ret < 0) + break; + } + if (ret == 0) { + cpu_dai = of_parse_phandle(cpu, "sound-dai", 0); + if (!cpu_dai) + ret = -EINVAL; + } + + of_node_put(cpu); + if (ret < 0) + goto err_put_node; + + ret = snd_soc_of_get_dai_link_codecs(dev, codec, codec_link); + if (ret < 0) + goto err_put_cpu_dai; + + /* Set capture capability only for boards with the MAX98090 CODEC */ + if (codec_link->num_codecs > 1) { + card->dai_link[0].dpcm_capture = 1; + card->dai_link[1].dpcm_capture = 1; + } + + priv->sclk_i2s = of_clk_get_by_name(cpu_dai, "i2s_opclk1"); + if (IS_ERR(priv->sclk_i2s)) { + ret = PTR_ERR(priv->sclk_i2s); + goto err_put_cpu_dai; + } + + priv->clk_i2s_bus = of_clk_get_by_name(cpu_dai, "iis"); + if (IS_ERR(priv->clk_i2s_bus)) { + ret = PTR_ERR(priv->clk_i2s_bus); + goto err_put_sclk; + } + + ret = devm_snd_soc_register_card(dev, card); + if (ret < 0) { + dev_err_probe(dev, ret, "snd_soc_register_card() failed\n"); + goto err_put_clk_i2s; + } + + of_node_put(cpu_dai); + of_node_put(codec); + return 0; + +err_put_clk_i2s: + clk_put(priv->clk_i2s_bus); +err_put_sclk: + clk_put(priv->sclk_i2s); +err_put_cpu_dai: + of_node_put(cpu_dai); + snd_soc_of_put_dai_link_codecs(codec_link); +err_put_node: + of_node_put(codec); + return ret; +} + +static int odroid_audio_remove(struct platform_device *pdev) +{ + struct odroid_priv *priv = platform_get_drvdata(pdev); + + snd_soc_of_put_dai_link_codecs(&priv->card.dai_link[1]); + clk_put(priv->sclk_i2s); + clk_put(priv->clk_i2s_bus); + + return 0; +} + +static const struct of_device_id odroid_audio_of_match[] = { + { .compatible = "hardkernel,odroid-xu3-audio" }, + { .compatible = "hardkernel,odroid-xu4-audio" }, + { .compatible = "samsung,odroid-xu3-audio" }, + { .compatible = "samsung,odroid-xu4-audio" }, + { }, +}; +MODULE_DEVICE_TABLE(of, odroid_audio_of_match); + +static struct platform_driver odroid_audio_driver = { + .driver = { + .name = "odroid-audio", + .of_match_table = odroid_audio_of_match, + .pm = &snd_soc_pm_ops, + }, + .probe = odroid_audio_probe, + .remove = odroid_audio_remove, +}; +module_platform_driver(odroid_audio_driver); + +MODULE_AUTHOR("Sylwester Nawrocki "); +MODULE_DESCRIPTION("Odroid XU3/XU4 audio support"); +MODULE_LICENSE("GPL v2"); -- cgit v1.2.3