From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- sound/soc/sof/Kconfig | 284 ++++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 284 insertions(+) create mode 100644 sound/soc/sof/Kconfig (limited to 'sound/soc/sof/Kconfig') diff --git a/sound/soc/sof/Kconfig b/sound/soc/sof/Kconfig new file mode 100644 index 000000000..a2725188f --- /dev/null +++ b/sound/soc/sof/Kconfig @@ -0,0 +1,284 @@ +# SPDX-License-Identifier: GPL-2.0-only +menuconfig SND_SOC_SOF_TOPLEVEL + bool "Sound Open Firmware Support" + help + This adds support for Sound Open Firmware (SOF). SOF is free and + generic open source audio DSP firmware for multiple devices. + Say Y if you have such a device that is supported by SOF. + If unsure select "N". + +if SND_SOC_SOF_TOPLEVEL + +config SND_SOC_SOF_PCI_DEV + tristate + +config SND_SOC_SOF_PCI + tristate "SOF PCI enumeration support" + depends on PCI + help + This adds support for PCI enumeration. This option is + required to enable Intel Skylake+ devices. + For backwards-compatibility with previous configurations the selection will + be used as default for platform-specific drivers. + Say Y if you need this option. + If unsure select "N". + +config SND_SOC_SOF_ACPI + tristate "SOF ACPI enumeration support" + depends on ACPI || COMPILE_TEST + help + This adds support for ACPI enumeration. This option is required + to enable Intel Broadwell/Baytrail/Cherrytrail devices. + For backwards-compatibility with previous configurations the selection will + be used as default for platform-specific drivers. + Say Y if you need this option. + If unsure select "N". + +config SND_SOC_SOF_ACPI_DEV + tristate + +config SND_SOC_SOF_OF + tristate "SOF OF enumeration support" + depends on OF + help + This adds support for Device Tree enumeration. This option is + required to enable i.MX8 or Mediatek devices. + Say Y if you need this option. If unsure select "N". + +config SND_SOC_SOF_OF_DEV + tristate + +config SND_SOC_SOF_COMPRESS + bool + select SND_SOC_COMPRESS + +config SND_SOC_SOF_DEBUG_PROBES + tristate + select SND_SOC_SOF_CLIENT + select SND_SOC_COMPRESS + help + This option enables the data probing feature that can be used to + gather data directly from specific points of the audio pipeline. + This option is not user-selectable but automagically handled by + 'select' statements at a higher level. + +config SND_SOC_SOF_CLIENT + tristate + select AUXILIARY_BUS + help + This option is not user-selectable but automagically handled by + 'select' statements at a higher level. + +config SND_SOC_SOF_DEVELOPER_SUPPORT + bool "SOF developer options support" + depends on EXPERT && SND_SOC_SOF + help + This option unlocks SOF developer options for debug/performance/ + code hardening. + Distributions should not select this option, only SOF development + teams should select it. + Say Y if you are involved in SOF development and need this option. + If not, select N. + +if SND_SOC_SOF_DEVELOPER_SUPPORT + +config SND_SOC_SOF_FORCE_PROBE_WORKQUEUE + bool "SOF force probe workqueue" + select SND_SOC_SOF_PROBE_WORK_QUEUE + help + This option forces the use of a probe workqueue, which is only used + when HDaudio is enabled due to module dependencies. Forcing this + option is intended for debug only, but this should not add any + functional issues in nominal cases. + Say Y if you are involved in SOF development and need this option. + If not, select N. + +config SND_SOC_SOF_NOCODEC + tristate + +config SND_SOC_SOF_NOCODEC_SUPPORT + bool "SOF nocodec static mode support" + help + This adds support for a dummy/nocodec machine driver fallback + option if no known codec is detected. This is typically only + enabled for developers or devices where the sound card is + controlled externally. + This option is mutually exclusive at build time with the Intel HDAudio support. + Selecting it may have negative impacts and prevent e.g. microphone + functionality from being enabled on Intel CoffeeLake and later + platforms. + Distributions should not select this option! + Say Y if you need this nocodec fallback option. + If unsure select "N". + +config SND_SOC_SOF_STRICT_ABI_CHECKS + bool "SOF strict ABI checks" + help + This option enables strict ABI checks for firmware and topology + files. + When these files are more recent than the kernel, the kernel + will handle the functionality it supports and may report errors + during topology creation or run-time usage if new functionality + is invoked. + This option will stop topology creation and firmware load upfront. + It is intended for SOF CI/releases and not for users or distros. + Say Y if you want strict ABI checks for an SOF release. + If you are not involved in SOF releases and CI development, + select "N". + +config SND_SOC_SOF_DEBUG + bool "SOF debugging features" + help + This option can be used to enable or disable individual SOF firmware + and driver debugging options. + Say Y if you are debugging SOF FW or drivers. + If unsure select "N". + +if SND_SOC_SOF_DEBUG + +config SND_SOC_SOF_NOCODEC_DEBUG_SUPPORT + bool "SOF nocodec debug mode support" + depends on !SND_SOC_SOF_NOCODEC_SUPPORT + help + This adds support for a dummy/nocodec machine driver fallback + option. + Unlike the SND_SOC_SOF_NOCODEC_SUPPORT, this option is NOT + mutually exclusive at build with the Intel HDAudio support. The + selection will be done depending on command line or modprobe.d settings + Distributions should not select this option! + Say Y if you need this nocodec debug fallback option. + If unsure select "N". + +config SND_SOC_SOF_FORCE_NOCODEC_MODE + bool "SOF force nocodec Mode" + depends on SND_SOC_SOF_NOCODEC_SUPPORT + help + This forces SOF to use dummy/nocodec as machine driver, even + though there is a codec detected on the real platform. This is + typically only enabled for developers for debug purposes, before + codec/machine driver is ready, or to exclude the impact of those + drivers. + Say Y if you need this force nocodec mode option. + If unsure select "N". + +config SND_SOC_SOF_DEBUG_XRUN_STOP + bool "SOF stop on XRUN" + help + This option forces PCMs to stop on any XRUN event. This is useful to + preserve any trace data and pipeline status prior to the XRUN. + Say Y if you are debugging SOF FW pipeline XRUNs. + If unsure select "N". + +config SND_SOC_SOF_DEBUG_VERBOSE_IPC + bool "SOF verbose IPC logs" + help + This option enables more verbose IPC logs, with command types in + human-readable form instead of just 32-bit hex dumps. This is useful + if you are trying to debug IPC with the DSP firmware. + If unsure select "N". + +config SND_SOC_SOF_DEBUG_FORCE_IPC_POSITION + bool "SOF force to use IPC for position update on SKL+" + help + This option forces to handle stream position update IPCs and run PCM + elapse to inform ALSA about that, on platforms (e.g. Intel SKL+) that + with other approach (e.g. HDAC DPIB/posbuf) to elapse PCM. + On platforms (e.g. Intel SKL-) where position update IPC is the only + one choice, this setting won't impact anything. + If you are trying to debug pointer update with position IPCs or where + DPIB/posbuf is not ready, select "Y". + If unsure select "N". + +config SND_SOC_SOF_DEBUG_ENABLE_DEBUGFS_CACHE + bool "SOF enable debugfs caching" + help + This option enables caching of debugfs + memory -> DSP resource (memory, register, etc) + before the audio DSP is suspended. This will increase the suspend + latency and therefore should be used for debug purposes only. + Say Y if you want to enable caching the memory windows. + If unsure, select "N". + +config SND_SOC_SOF_DEBUG_ENABLE_FIRMWARE_TRACE + bool "SOF enable firmware trace" + help + The firmware trace can be enabled either at build-time with + this option, or dynamically by setting flags in the SOF core + module parameter (similar to dynamic debug). + If unsure, select "N". + +config SND_SOC_SOF_DEBUG_IPC_FLOOD_TEST + tristate "SOF enable IPC flood test" + depends on SND_SOC_SOF + select SND_SOC_SOF_CLIENT + help + This option enables a separate client device for IPC flood test + which can be used to flood the DSP with test IPCs and gather stats + about response times. + Say Y if you want to enable IPC flood test. + If unsure, select "N". + +config SND_SOC_SOF_DEBUG_IPC_FLOOD_TEST_NUM + int "Number of IPC flood test clients" + range 1 32 + default 2 + depends on SND_SOC_SOF_DEBUG_IPC_FLOOD_TEST + help + Select the number of IPC flood test clients to be created. + +config SND_SOC_SOF_DEBUG_IPC_MSG_INJECTOR + tristate "SOF enable IPC message injector" + depends on SND_SOC_SOF + select SND_SOC_SOF_CLIENT + help + This option enables the IPC message injector which can be used to send + crafted IPC messages to the DSP to test its robustness. + Say Y if you want to enable the IPC message injector. + If unsure, select "N". + +config SND_SOC_SOF_DEBUG_RETAIN_DSP_CONTEXT + bool "SOF retain DSP context on any FW exceptions" + help + This option keeps the DSP in D0 state so that firmware debug + information can be retained and dumped to userspace. + Say Y if you want to retain DSP context for FW exceptions. + If unsure, select "N". + +endif ## SND_SOC_SOF_DEBUG + +endif ## SND_SOC_SOF_DEVELOPER_SUPPORT + +config SND_SOC_SOF + tristate + select SND_SOC_TOPOLOGY + select SND_SOC_SOF_NOCODEC if SND_SOC_SOF_NOCODEC_SUPPORT + select SND_SOC_SOF_NOCODEC if SND_SOC_SOF_NOCODEC_DEBUG_SUPPORT + help + This option is not user-selectable but automagically handled by + 'select' statements at a higher level. + The selection is made at the top level and does not exactly follow + module dependencies but since the module or built-in type is decided + at the top level it doesn't matter. + +config SND_SOC_SOF_PROBE_WORK_QUEUE + bool + help + This option is not user-selectable but automagically handled by + 'select' statements at a higher level. + When selected, the probe is handled in two steps, for example to + avoid lockdeps if request_module is used in the probe. + +# Supported IPC versions +config SND_SOC_SOF_IPC3 + bool + +config SND_SOC_SOF_INTEL_IPC4 + bool + +source "sound/soc/sof/amd/Kconfig" +source "sound/soc/sof/imx/Kconfig" +source "sound/soc/sof/intel/Kconfig" +source "sound/soc/sof/mediatek/Kconfig" +source "sound/soc/sof/xtensa/Kconfig" + +endif -- cgit v1.2.3