From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- sound/soc/sof/core.c | 493 +++++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 493 insertions(+) create mode 100644 sound/soc/sof/core.c (limited to 'sound/soc/sof/core.c') diff --git a/sound/soc/sof/core.c b/sound/soc/sof/core.c new file mode 100644 index 000000000..625977a29 --- /dev/null +++ b/sound/soc/sof/core.c @@ -0,0 +1,493 @@ +// SPDX-License-Identifier: (GPL-2.0-only OR BSD-3-Clause) +// +// This file is provided under a dual BSD/GPLv2 license. When using or +// redistributing this file, you may do so under either license. +// +// Copyright(c) 2018 Intel Corporation. All rights reserved. +// +// Author: Liam Girdwood +// + +#include +#include +#include +#include +#include "sof-priv.h" +#include "ops.h" + +#define CREATE_TRACE_POINTS +#include + +/* see SOF_DBG_ flags */ +static int sof_core_debug = IS_ENABLED(CONFIG_SND_SOC_SOF_DEBUG_ENABLE_FIRMWARE_TRACE); +module_param_named(sof_debug, sof_core_debug, int, 0444); +MODULE_PARM_DESC(sof_debug, "SOF core debug options (0x0 all off)"); + +/* SOF defaults if not provided by the platform in ms */ +#define TIMEOUT_DEFAULT_IPC_MS 500 +#define TIMEOUT_DEFAULT_BOOT_MS 2000 + +/** + * sof_debug_check_flag - check if a given flag(s) is set in sof_core_debug + * @mask: Flag or combination of flags to check + * + * Returns true if all bits set in mask is also set in sof_core_debug, otherwise + * false + */ +bool sof_debug_check_flag(int mask) +{ + if ((sof_core_debug & mask) == mask) + return true; + + return false; +} +EXPORT_SYMBOL(sof_debug_check_flag); + +/* + * FW Panic/fault handling. + */ + +struct sof_panic_msg { + u32 id; + const char *msg; +}; + +/* standard FW panic types */ +static const struct sof_panic_msg panic_msg[] = { + {SOF_IPC_PANIC_MEM, "out of memory"}, + {SOF_IPC_PANIC_WORK, "work subsystem init failed"}, + {SOF_IPC_PANIC_IPC, "IPC subsystem init failed"}, + {SOF_IPC_PANIC_ARCH, "arch init failed"}, + {SOF_IPC_PANIC_PLATFORM, "platform init failed"}, + {SOF_IPC_PANIC_TASK, "scheduler init failed"}, + {SOF_IPC_PANIC_EXCEPTION, "runtime exception"}, + {SOF_IPC_PANIC_DEADLOCK, "deadlock"}, + {SOF_IPC_PANIC_STACK, "stack overflow"}, + {SOF_IPC_PANIC_IDLE, "can't enter idle"}, + {SOF_IPC_PANIC_WFI, "invalid wait state"}, + {SOF_IPC_PANIC_ASSERT, "assertion failed"}, +}; + +/** + * sof_print_oops_and_stack - Handle the printing of DSP oops and stack trace + * @sdev: Pointer to the device's sdev + * @level: prink log level to use for the printing + * @panic_code: the panic code + * @tracep_code: tracepoint code + * @oops: Pointer to DSP specific oops data + * @panic_info: Pointer to the received panic information message + * @stack: Pointer to the call stack data + * @stack_words: Number of words in the stack data + * + * helper to be called from .dbg_dump callbacks. No error code is + * provided, it's left as an exercise for the caller of .dbg_dump + * (typically IPC or loader) + */ +void sof_print_oops_and_stack(struct snd_sof_dev *sdev, const char *level, + u32 panic_code, u32 tracep_code, void *oops, + struct sof_ipc_panic_info *panic_info, + void *stack, size_t stack_words) +{ + u32 code; + int i; + + /* is firmware dead ? */ + if ((panic_code & SOF_IPC_PANIC_MAGIC_MASK) != SOF_IPC_PANIC_MAGIC) { + dev_printk(level, sdev->dev, "unexpected fault %#010x trace %#010x\n", + panic_code, tracep_code); + return; /* no fault ? */ + } + + code = panic_code & (SOF_IPC_PANIC_MAGIC_MASK | SOF_IPC_PANIC_CODE_MASK); + + for (i = 0; i < ARRAY_SIZE(panic_msg); i++) { + if (panic_msg[i].id == code) { + dev_printk(level, sdev->dev, "reason: %s (%#x)\n", + panic_msg[i].msg, code & SOF_IPC_PANIC_CODE_MASK); + dev_printk(level, sdev->dev, "trace point: %#010x\n", tracep_code); + goto out; + } + } + + /* unknown error */ + dev_printk(level, sdev->dev, "unknown panic code: %#x\n", + code & SOF_IPC_PANIC_CODE_MASK); + dev_printk(level, sdev->dev, "trace point: %#010x\n", tracep_code); + +out: + dev_printk(level, sdev->dev, "panic at %s:%d\n", panic_info->filename, + panic_info->linenum); + sof_oops(sdev, level, oops); + sof_stack(sdev, level, oops, stack, stack_words); +} +EXPORT_SYMBOL(sof_print_oops_and_stack); + +/* Helper to manage DSP state */ +void sof_set_fw_state(struct snd_sof_dev *sdev, enum sof_fw_state new_state) +{ + if (sdev->fw_state == new_state) + return; + + dev_dbg(sdev->dev, "fw_state change: %d -> %d\n", sdev->fw_state, new_state); + sdev->fw_state = new_state; + + switch (new_state) { + case SOF_FW_BOOT_NOT_STARTED: + case SOF_FW_BOOT_COMPLETE: + case SOF_FW_CRASHED: + sof_client_fw_state_dispatcher(sdev); + fallthrough; + default: + break; + } +} +EXPORT_SYMBOL(sof_set_fw_state); + +/* + * FW Boot State Transition Diagram + * + * +----------------------------------------------------------------------+ + * | | + * ------------------ ------------------ | + * | | | | | + * | BOOT_FAILED |<-------| READY_FAILED | | + * | |<--+ | | ------------------ | + * ------------------ | ------------------ | | | + * ^ | ^ | CRASHED |---+ | + * | | | | | | | + * (FW Boot Timeout) | (FW_READY FAIL) ------------------ | | + * | | | ^ | | + * | | | |(DSP Panic) | | + * ------------------ | | ------------------ | | + * | | | | | | | | + * | IN_PROGRESS |---------------+------------->| COMPLETE | | | + * | | (FW Boot OK) (FW_READY OK) | | | | + * ------------------ | ------------------ | | + * ^ | | | | + * | | | | | + * (FW Loading OK) | (System Suspend/Runtime Suspend) + * | | | | | + * | (FW Loading Fail) | | | + * ------------------ | ------------------ | | | + * | | | | |<-----+ | | + * | PREPARE |---+ | NOT_STARTED |<---------------------+ | + * | | | |<--------------------------+ + * ------------------ ------------------ + * | ^ | ^ + * | | | | + * | +-----------------------+ | + * | (DSP Probe OK) | + * | | + * | | + * +------------------------------------+ + * (System Suspend/Runtime Suspend) + */ + +static int sof_probe_continue(struct snd_sof_dev *sdev) +{ + struct snd_sof_pdata *plat_data = sdev->pdata; + int ret; + + /* probe the DSP hardware */ + ret = snd_sof_probe(sdev); + if (ret < 0) { + dev_err(sdev->dev, "error: failed to probe DSP %d\n", ret); + goto probe_err; + } + + sof_set_fw_state(sdev, SOF_FW_BOOT_PREPARE); + + /* check machine info */ + ret = sof_machine_check(sdev); + if (ret < 0) { + dev_err(sdev->dev, "error: failed to get machine info %d\n", + ret); + goto dsp_err; + } + + /* set up platform component driver */ + snd_sof_new_platform_drv(sdev); + + /* register any debug/trace capabilities */ + ret = snd_sof_dbg_init(sdev); + if (ret < 0) { + /* + * debugfs issues are suppressed in snd_sof_dbg_init() since + * we cannot rely on debugfs + * here we trap errors due to memory allocation only. + */ + dev_err(sdev->dev, "error: failed to init DSP trace/debug %d\n", + ret); + goto dbg_err; + } + + /* init the IPC */ + sdev->ipc = snd_sof_ipc_init(sdev); + if (!sdev->ipc) { + ret = -ENOMEM; + dev_err(sdev->dev, "error: failed to init DSP IPC %d\n", ret); + goto ipc_err; + } + + /* load the firmware */ + ret = snd_sof_load_firmware(sdev); + if (ret < 0) { + dev_err(sdev->dev, "error: failed to load DSP firmware %d\n", + ret); + sof_set_fw_state(sdev, SOF_FW_BOOT_FAILED); + goto fw_load_err; + } + + sof_set_fw_state(sdev, SOF_FW_BOOT_IN_PROGRESS); + + /* + * Boot the firmware. The FW boot status will be modified + * in snd_sof_run_firmware() depending on the outcome. + */ + ret = snd_sof_run_firmware(sdev); + if (ret < 0) { + dev_err(sdev->dev, "error: failed to boot DSP firmware %d\n", + ret); + sof_set_fw_state(sdev, SOF_FW_BOOT_FAILED); + goto fw_run_err; + } + + if (sof_debug_check_flag(SOF_DBG_ENABLE_TRACE)) { + sdev->fw_trace_is_supported = true; + + /* init firmware tracing */ + ret = sof_fw_trace_init(sdev); + if (ret < 0) { + /* non fatal */ + dev_warn(sdev->dev, "failed to initialize firmware tracing %d\n", + ret); + } + } else { + dev_dbg(sdev->dev, "SOF firmware trace disabled\n"); + } + + /* hereafter all FW boot flows are for PM reasons */ + sdev->first_boot = false; + + /* now register audio DSP platform driver and dai */ + ret = devm_snd_soc_register_component(sdev->dev, &sdev->plat_drv, + sof_ops(sdev)->drv, + sof_ops(sdev)->num_drv); + if (ret < 0) { + dev_err(sdev->dev, + "error: failed to register DSP DAI driver %d\n", ret); + goto fw_trace_err; + } + + ret = snd_sof_machine_register(sdev, plat_data); + if (ret < 0) { + dev_err(sdev->dev, + "error: failed to register machine driver %d\n", ret); + goto fw_trace_err; + } + + ret = sof_register_clients(sdev); + if (ret < 0) { + dev_err(sdev->dev, "failed to register clients %d\n", ret); + goto sof_machine_err; + } + + /* + * Some platforms in SOF, ex: BYT, may not have their platform PM + * callbacks set. Increment the usage count so as to + * prevent the device from entering runtime suspend. + */ + if (!sof_ops(sdev)->runtime_suspend || !sof_ops(sdev)->runtime_resume) + pm_runtime_get_noresume(sdev->dev); + + if (plat_data->sof_probe_complete) + plat_data->sof_probe_complete(sdev->dev); + + sdev->probe_completed = true; + + return 0; + +sof_machine_err: + snd_sof_machine_unregister(sdev, plat_data); +fw_trace_err: + sof_fw_trace_free(sdev); +fw_run_err: + snd_sof_fw_unload(sdev); +fw_load_err: + snd_sof_ipc_free(sdev); +ipc_err: +dbg_err: + snd_sof_free_debug(sdev); +dsp_err: + snd_sof_remove(sdev); +probe_err: + sof_ops_free(sdev); + + /* all resources freed, update state to match */ + sof_set_fw_state(sdev, SOF_FW_BOOT_NOT_STARTED); + sdev->first_boot = true; + + return ret; +} + +static void sof_probe_work(struct work_struct *work) +{ + struct snd_sof_dev *sdev = + container_of(work, struct snd_sof_dev, probe_work); + int ret; + + ret = sof_probe_continue(sdev); + if (ret < 0) { + /* errors cannot be propagated, log */ + dev_err(sdev->dev, "error: %s failed err: %d\n", __func__, ret); + } +} + +int snd_sof_device_probe(struct device *dev, struct snd_sof_pdata *plat_data) +{ + struct snd_sof_dev *sdev; + int ret; + + sdev = devm_kzalloc(dev, sizeof(*sdev), GFP_KERNEL); + if (!sdev) + return -ENOMEM; + + /* initialize sof device */ + sdev->dev = dev; + + /* initialize default DSP power state */ + sdev->dsp_power_state.state = SOF_DSP_PM_D0; + + sdev->pdata = plat_data; + sdev->first_boot = true; + dev_set_drvdata(dev, sdev); + + /* check IPC support */ + if (!(BIT(plat_data->ipc_type) & plat_data->desc->ipc_supported_mask)) { + dev_err(dev, "ipc_type %d is not supported on this platform, mask is %#x\n", + plat_data->ipc_type, plat_data->desc->ipc_supported_mask); + return -EINVAL; + } + + /* init ops, if necessary */ + ret = sof_ops_init(sdev); + if (ret < 0) + return ret; + + /* check all mandatory ops */ + if (!sof_ops(sdev) || !sof_ops(sdev)->probe || !sof_ops(sdev)->run || + !sof_ops(sdev)->block_read || !sof_ops(sdev)->block_write || + !sof_ops(sdev)->send_msg || !sof_ops(sdev)->load_firmware || + !sof_ops(sdev)->ipc_msg_data) { + sof_ops_free(sdev); + dev_err(dev, "error: missing mandatory ops\n"); + return -EINVAL; + } + + INIT_LIST_HEAD(&sdev->pcm_list); + INIT_LIST_HEAD(&sdev->kcontrol_list); + INIT_LIST_HEAD(&sdev->widget_list); + INIT_LIST_HEAD(&sdev->dai_list); + INIT_LIST_HEAD(&sdev->dai_link_list); + INIT_LIST_HEAD(&sdev->route_list); + INIT_LIST_HEAD(&sdev->ipc_client_list); + INIT_LIST_HEAD(&sdev->ipc_rx_handler_list); + INIT_LIST_HEAD(&sdev->fw_state_handler_list); + spin_lock_init(&sdev->ipc_lock); + spin_lock_init(&sdev->hw_lock); + mutex_init(&sdev->power_state_access); + mutex_init(&sdev->ipc_client_mutex); + mutex_init(&sdev->client_event_handler_mutex); + + /* set default timeouts if none provided */ + if (plat_data->desc->ipc_timeout == 0) + sdev->ipc_timeout = TIMEOUT_DEFAULT_IPC_MS; + else + sdev->ipc_timeout = plat_data->desc->ipc_timeout; + if (plat_data->desc->boot_timeout == 0) + sdev->boot_timeout = TIMEOUT_DEFAULT_BOOT_MS; + else + sdev->boot_timeout = plat_data->desc->boot_timeout; + + sof_set_fw_state(sdev, SOF_FW_BOOT_NOT_STARTED); + + if (IS_ENABLED(CONFIG_SND_SOC_SOF_PROBE_WORK_QUEUE)) { + INIT_WORK(&sdev->probe_work, sof_probe_work); + schedule_work(&sdev->probe_work); + return 0; + } + + return sof_probe_continue(sdev); +} +EXPORT_SYMBOL(snd_sof_device_probe); + +bool snd_sof_device_probe_completed(struct device *dev) +{ + struct snd_sof_dev *sdev = dev_get_drvdata(dev); + + return sdev->probe_completed; +} +EXPORT_SYMBOL(snd_sof_device_probe_completed); + +int snd_sof_device_remove(struct device *dev) +{ + struct snd_sof_dev *sdev = dev_get_drvdata(dev); + struct snd_sof_pdata *pdata = sdev->pdata; + int ret; + + if (IS_ENABLED(CONFIG_SND_SOC_SOF_PROBE_WORK_QUEUE)) + cancel_work_sync(&sdev->probe_work); + + /* + * Unregister any registered client device first before IPC and debugfs + * to allow client drivers to be removed cleanly + */ + sof_unregister_clients(sdev); + + /* + * Unregister machine driver. This will unbind the snd_card which + * will remove the component driver and unload the topology + * before freeing the snd_card. + */ + snd_sof_machine_unregister(sdev, pdata); + + if (sdev->fw_state > SOF_FW_BOOT_NOT_STARTED) { + sof_fw_trace_free(sdev); + ret = snd_sof_dsp_power_down_notify(sdev); + if (ret < 0) + dev_warn(dev, "error: %d failed to prepare DSP for device removal", + ret); + + snd_sof_ipc_free(sdev); + snd_sof_free_debug(sdev); + snd_sof_remove(sdev); + } + + sof_ops_free(sdev); + + /* release firmware */ + snd_sof_fw_unload(sdev); + + return 0; +} +EXPORT_SYMBOL(snd_sof_device_remove); + +int snd_sof_device_shutdown(struct device *dev) +{ + struct snd_sof_dev *sdev = dev_get_drvdata(dev); + + if (IS_ENABLED(CONFIG_SND_SOC_SOF_PROBE_WORK_QUEUE)) + cancel_work_sync(&sdev->probe_work); + + if (sdev->fw_state == SOF_FW_BOOT_COMPLETE) + return snd_sof_shutdown(sdev); + + return 0; +} +EXPORT_SYMBOL(snd_sof_device_shutdown); + +MODULE_AUTHOR("Liam Girdwood"); +MODULE_DESCRIPTION("Sound Open Firmware (SOF) Core"); +MODULE_LICENSE("Dual BSD/GPL"); +MODULE_ALIAS("platform:sof-audio"); +MODULE_IMPORT_NS(SND_SOC_SOF_CLIENT); -- cgit v1.2.3