From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- sound/soc/sof/intel/Kconfig | 342 ++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 342 insertions(+) create mode 100644 sound/soc/sof/intel/Kconfig (limited to 'sound/soc/sof/intel/Kconfig') diff --git a/sound/soc/sof/intel/Kconfig b/sound/soc/sof/intel/Kconfig new file mode 100644 index 000000000..36a0e2bf3 --- /dev/null +++ b/sound/soc/sof/intel/Kconfig @@ -0,0 +1,342 @@ +# SPDX-License-Identifier: GPL-2.0-only +config SND_SOC_SOF_INTEL_TOPLEVEL + bool "SOF support for Intel audio DSPs" + depends on X86 || COMPILE_TEST + help + This adds support for Sound Open Firmware for Intel(R) platforms. + Say Y if you have such a device. + If unsure select "N". + +if SND_SOC_SOF_INTEL_TOPLEVEL + +config SND_SOC_SOF_INTEL_HIFI_EP_IPC + tristate + help + This option is not user-selectable but automagically handled by + 'select' statements at a higher level. + +config SND_SOC_SOF_INTEL_ATOM_HIFI_EP + tristate + select SND_SOC_SOF_INTEL_COMMON + select SND_SOC_SOF_INTEL_HIFI_EP_IPC + help + This option is not user-selectable but automagically handled by + 'select' statements at a higher level. + +config SND_SOC_SOF_INTEL_COMMON + tristate + select SND_SOC_SOF + select SND_SOC_ACPI_INTEL_MATCH + select SND_SOC_SOF_XTENSA + select SND_SOC_INTEL_MACH + select SND_SOC_ACPI if ACPI + select SND_INTEL_DSP_CONFIG + help + This option is not user-selectable but automagically handled by + 'select' statements at a higher level. + +if SND_SOC_SOF_ACPI + +config SND_SOC_SOF_BAYTRAIL + tristate "SOF support for Baytrail, Braswell and Cherrytrail" + default SND_SOC_SOF_ACPI + select SND_SOC_SOF_IPC3 + select SND_SOC_SOF_INTEL_COMMON + select SND_SOC_SOF_INTEL_ATOM_HIFI_EP + select SND_SOC_SOF_ACPI_DEV + select IOSF_MBI if X86 && PCI + help + This adds support for Sound Open Firmware for Intel(R) platforms + using the Baytrail, Braswell or Cherrytrail processors. + This option can coexist in the same build with the Atom legacy + drivers, currently the default but which will be deprecated + at some point. + Existing firmware/topology binaries and UCM configurations + typically located in the root file system are already + compatible with both SOF or Atom/SST legacy drivers. + This is a recommended option for distributions. + Say Y if you want to enable SOF on Baytrail/Cherrytrail. + If unsure select "N". + +config SND_SOC_SOF_BROADWELL + tristate "SOF support for Broadwell" + default SND_SOC_SOF_ACPI + select SND_SOC_SOF_IPC3 + select SND_SOC_SOF_INTEL_COMMON + select SND_SOC_SOF_INTEL_HIFI_EP_IPC + select SND_SOC_SOF_ACPI_DEV + help + This adds support for Sound Open Firmware for Intel(R) platforms + using the Broadwell processors. + This option can coexist in the same build with the default 'catpt' + driver. + Existing firmware/topology binaries and UCM configurations typically + located in the root file system are already compatible with both SOF + or catpt drivers. + SOF does not fully support Broadwell and has limitations related to + DMA and suspend-resume, this is not a recommended option for + distributions. + Say Y if you want to enable SOF on Broadwell. + If unsure select "N". + +endif ## SND_SOC_SOF_ACPI + +if SND_SOC_SOF_PCI + +config SND_SOC_SOF_MERRIFIELD + tristate "SOF support for Tangier/Merrifield" + default SND_SOC_SOF_PCI + select SND_SOC_SOF_PCI_DEV + select SND_SOC_SOF_IPC3 + select SND_SOC_SOF_INTEL_ATOM_HIFI_EP + help + This adds support for Sound Open Firmware for Intel(R) platforms + using the Tangier/Merrifield processors. + Say Y if you have such a device. + If unsure select "N". + +config SND_SOC_SOF_INTEL_SKL + tristate + select SND_SOC_SOF_HDA_COMMON + select SND_SOC_SOF_INTEL_IPC4 + +config SND_SOC_SOF_SKYLAKE + tristate "SOF support for SkyLake" + default SND_SOC_SOF_PCI + select SND_SOC_SOF_INTEL_SKL + help + This adds support for the Intel(R) platforms using the SkyLake processors. + Say Y if you have such a device. + If unsure select "N". + This is intended only for developers and not a recommend option for distros. + +config SND_SOC_SOF_KABYLAKE + tristate "SOF support for KabyLake" + default SND_SOC_SOF_PCI + select SND_SOC_SOF_INTEL_SKL + help + This adds support for the Intel(R) platforms using the KabyLake processors. + Say Y if you have such a device. + If unsure select "N". + This is intended only for developers and not a recommend option for distros. + +config SND_SOC_SOF_INTEL_APL + tristate + select SND_SOC_SOF_HDA_COMMON + select SND_SOC_SOF_IPC3 + select SND_SOC_SOF_INTEL_IPC4 + +config SND_SOC_SOF_APOLLOLAKE + tristate "SOF support for Apollolake" + default SND_SOC_SOF_PCI + select SND_SOC_SOF_INTEL_APL + help + This adds support for Sound Open Firmware for Intel(R) platforms + using the Apollolake processors. + Say Y if you have such a device. + If unsure select "N". + +config SND_SOC_SOF_GEMINILAKE + tristate "SOF support for GeminiLake" + default SND_SOC_SOF_PCI + select SND_SOC_SOF_INTEL_APL + help + This adds support for Sound Open Firmware for Intel(R) platforms + using the Geminilake processors. + Say Y if you have such a device. + If unsure select "N". + +config SND_SOC_SOF_INTEL_CNL + tristate + select SND_SOC_SOF_HDA_COMMON + select SND_SOC_SOF_INTEL_SOUNDWIRE_LINK_BASELINE + select SND_SOC_SOF_IPC3 + select SND_SOC_SOF_INTEL_IPC4 + +config SND_SOC_SOF_CANNONLAKE + tristate "SOF support for Cannonlake" + default SND_SOC_SOF_PCI + select SND_SOC_SOF_INTEL_CNL + help + This adds support for Sound Open Firmware for Intel(R) platforms + using the Cannonlake processors. + Say Y if you have such a device. + If unsure select "N". + +config SND_SOC_SOF_COFFEELAKE + tristate "SOF support for CoffeeLake" + default SND_SOC_SOF_PCI + select SND_SOC_SOF_INTEL_CNL + help + This adds support for Sound Open Firmware for Intel(R) platforms + using the Coffeelake processors. + Say Y if you have such a device. + If unsure select "N". + +config SND_SOC_SOF_COMETLAKE + tristate "SOF support for CometLake" + default SND_SOC_SOF_PCI + select SND_SOC_SOF_INTEL_CNL + help + This adds support for Sound Open Firmware for Intel(R) platforms + using the Cometlake processors. + If unsure select "N". + +config SND_SOC_SOF_INTEL_ICL + tristate + select SND_SOC_SOF_HDA_COMMON + select SND_SOC_SOF_INTEL_SOUNDWIRE_LINK_BASELINE + select SND_SOC_SOF_IPC3 + select SND_SOC_SOF_INTEL_IPC4 + +config SND_SOC_SOF_ICELAKE + tristate "SOF support for Icelake" + default SND_SOC_SOF_PCI + select SND_SOC_SOF_INTEL_ICL + help + This adds support for Sound Open Firmware for Intel(R) platforms + using the Icelake processors. + Say Y if you have such a device. + If unsure select "N". + +config SND_SOC_SOF_JASPERLAKE + tristate "SOF support for JasperLake" + default SND_SOC_SOF_PCI + select SND_SOC_SOF_INTEL_ICL + help + This adds support for Sound Open Firmware for Intel(R) platforms + using the JasperLake processors. + Say Y if you have such a device. + If unsure select "N". + +config SND_SOC_SOF_INTEL_TGL + tristate + select SND_SOC_SOF_HDA_COMMON + select SND_SOC_SOF_INTEL_SOUNDWIRE_LINK_BASELINE + select SND_SOC_SOF_IPC3 + select SND_SOC_SOF_INTEL_IPC4 + +config SND_SOC_SOF_TIGERLAKE + tristate "SOF support for Tigerlake" + default SND_SOC_SOF_PCI + select SND_SOC_SOF_INTEL_TGL + help + This adds support for Sound Open Firmware for Intel(R) platforms + using the Tigerlake processors. + Say Y if you have such a device. + If unsure select "N". + +config SND_SOC_SOF_ELKHARTLAKE + tristate "SOF support for ElkhartLake" + default SND_SOC_SOF_PCI + select SND_SOC_SOF_INTEL_TGL + help + This adds support for Sound Open Firmware for Intel(R) platforms + using the ElkhartLake processors. + Say Y if you have such a device. + If unsure select "N". + +config SND_SOC_SOF_ALDERLAKE + tristate "SOF support for Alderlake" + default SND_SOC_SOF_PCI + select SND_SOC_SOF_INTEL_TGL + help + This adds support for Sound Open Firmware for Intel(R) platforms + using the Alderlake processors. + Say Y if you have such a device. + If unsure select "N". + +config SND_SOC_SOF_INTEL_MTL + tristate + select SND_SOC_SOF_HDA_COMMON + select SND_SOC_SOF_INTEL_SOUNDWIRE_LINK_BASELINE + select SND_SOC_SOF_INTEL_IPC4 + +config SND_SOC_SOF_METEORLAKE + tristate "SOF support for Meteorlake" + default SND_SOC_SOF_PCI + select SND_SOC_SOF_INTEL_MTL + help + This adds support for Sound Open Firmware for Intel(R) platforms + using the Meteorlake processors. + Say Y if you have such a device. + If unsure select "N". + +config SND_SOC_SOF_HDA_COMMON + tristate + select SND_SOC_SOF_INTEL_COMMON + select SND_SOC_SOF_PCI_DEV + select SND_INTEL_DSP_CONFIG + select SND_SOC_SOF_HDA_LINK_BASELINE + select SND_SOC_SOF_HDA_PROBES + help + This option is not user-selectable but automagically handled by + 'select' statements at a higher level. + +if SND_SOC_SOF_HDA_COMMON + +config SND_SOC_SOF_HDA_LINK + bool "SOF support for HDA Links(HDA/HDMI)" + depends on SND_SOC_SOF_NOCODEC_SUPPORT=n + select SND_SOC_SOF_PROBE_WORK_QUEUE + help + This adds support for HDA links(HDA/HDMI) with Sound Open Firmware + for Intel(R) platforms. + Say Y if you want to enable HDA links with SOF. + If unsure select "N". + +config SND_SOC_SOF_HDA_AUDIO_CODEC + bool "SOF support for HDAudio codecs" + depends on SND_SOC_SOF_HDA_LINK + help + This adds support for HDAudio codecs with Sound Open Firmware + for Intel(R) platforms. + Say Y if you want to enable HDAudio codecs with SOF. + If unsure select "N". + +endif ## SND_SOC_SOF_HDA_COMMON + +config SND_SOC_SOF_HDA_LINK_BASELINE + tristate + select SND_SOC_SOF_HDA if SND_SOC_SOF_HDA_LINK + help + This option is not user-selectable but automagically handled by + 'select' statements at a higher level. + +config SND_SOC_SOF_HDA + tristate + select SND_HDA_EXT_CORE if SND_SOC_SOF_HDA_LINK + select SND_SOC_HDAC_HDA if SND_SOC_SOF_HDA_AUDIO_CODEC + help + This option is not user-selectable but automagically handled by + 'select' statements at a higher level. + +config SND_SOC_SOF_HDA_PROBES + tristate + select SND_SOC_SOF_DEBUG_PROBES + help + The option enables the data probing for Intel(R) Skylake and newer + (HDA) platforms. + This option is not user-selectable but automagically handled by + 'select' statements at a higher level. + +config SND_SOC_SOF_INTEL_SOUNDWIRE_LINK_BASELINE + tristate + select SOUNDWIRE_INTEL if SND_SOC_SOF_INTEL_SOUNDWIRE + select SND_INTEL_SOUNDWIRE_ACPI if SND_SOC_SOF_INTEL_SOUNDWIRE + +config SND_SOC_SOF_INTEL_SOUNDWIRE + tristate "SOF support for SoundWire" + default SND_SOC_SOF_INTEL_SOUNDWIRE_LINK_BASELINE + depends on SND_SOC_SOF_INTEL_SOUNDWIRE_LINK_BASELINE + depends on ACPI && SOUNDWIRE + depends on !(SOUNDWIRE=m && SND_SOC_SOF_INTEL_SOUNDWIRE_LINK_BASELINE=y) + help + This adds support for SoundWire with Sound Open Firmware + for Intel(R) platforms. + Say Y if you want to enable SoundWire links with SOF. + If unsure select "N". + +endif ## SND_SOC_SOF_PCI + +endif ## SND_SOC_SOF_INTEL_TOPLEVEL -- cgit v1.2.3