From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- sound/soc/tegra/tegra210_ope.c | 419 +++++++++++++++++++++++++++++++++++++++++ 1 file changed, 419 insertions(+) create mode 100644 sound/soc/tegra/tegra210_ope.c (limited to 'sound/soc/tegra/tegra210_ope.c') diff --git a/sound/soc/tegra/tegra210_ope.c b/sound/soc/tegra/tegra210_ope.c new file mode 100644 index 000000000..3dd2bdec6 --- /dev/null +++ b/sound/soc/tegra/tegra210_ope.c @@ -0,0 +1,419 @@ +// SPDX-License-Identifier: GPL-2.0-only +// +// tegra210_ope.c - Tegra210 OPE driver +// +// Copyright (c) 2022, NVIDIA CORPORATION. All rights reserved. + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include "tegra210_mbdrc.h" +#include "tegra210_ope.h" +#include "tegra210_peq.h" +#include "tegra_cif.h" + +static const struct reg_default tegra210_ope_reg_defaults[] = { + { TEGRA210_OPE_RX_INT_MASK, 0x00000001}, + { TEGRA210_OPE_RX_CIF_CTRL, 0x00007700}, + { TEGRA210_OPE_TX_INT_MASK, 0x00000001}, + { TEGRA210_OPE_TX_CIF_CTRL, 0x00007700}, + { TEGRA210_OPE_CG, 0x1}, +}; + +static int tegra210_ope_set_audio_cif(struct tegra210_ope *ope, + struct snd_pcm_hw_params *params, + unsigned int reg) +{ + int channels, audio_bits; + struct tegra_cif_conf cif_conf; + + memset(&cif_conf, 0, sizeof(struct tegra_cif_conf)); + + channels = params_channels(params); + if (channels < 2) + return -EINVAL; + + switch (params_format(params)) { + case SNDRV_PCM_FORMAT_S16_LE: + audio_bits = TEGRA_ACIF_BITS_16; + break; + case SNDRV_PCM_FORMAT_S32_LE: + audio_bits = TEGRA_ACIF_BITS_32; + break; + default: + return -EINVAL; + } + + cif_conf.audio_ch = channels; + cif_conf.client_ch = channels; + cif_conf.audio_bits = audio_bits; + cif_conf.client_bits = audio_bits; + + tegra_set_cif(ope->regmap, reg, &cif_conf); + + return 0; +} + +static int tegra210_ope_hw_params(struct snd_pcm_substream *substream, + struct snd_pcm_hw_params *params, + struct snd_soc_dai *dai) +{ + struct device *dev = dai->dev; + struct tegra210_ope *ope = snd_soc_dai_get_drvdata(dai); + int err; + + /* Set RX and TX CIF */ + err = tegra210_ope_set_audio_cif(ope, params, + TEGRA210_OPE_RX_CIF_CTRL); + if (err) { + dev_err(dev, "Can't set OPE RX CIF: %d\n", err); + return err; + } + + err = tegra210_ope_set_audio_cif(ope, params, + TEGRA210_OPE_TX_CIF_CTRL); + if (err) { + dev_err(dev, "Can't set OPE TX CIF: %d\n", err); + return err; + } + + tegra210_mbdrc_hw_params(dai->component); + + return err; +} + +static int tegra210_ope_component_probe(struct snd_soc_component *cmpnt) +{ + struct tegra210_ope *ope = dev_get_drvdata(cmpnt->dev); + + tegra210_peq_component_init(cmpnt); + tegra210_mbdrc_component_init(cmpnt); + + /* + * The OPE, PEQ and MBDRC functionalities are combined under one + * device registered by OPE driver. In fact OPE HW block includes + * sub blocks PEQ and MBDRC. However driver registers separate + * regmap interfaces for each of these. ASoC core depends on + * dev_get_regmap() to populate the regmap field for a given ASoC + * component. A component can have one regmap reference and since + * the DAPM routes depend on OPE regmap only, below explicit + * assignment is done to highlight this. This is needed for ASoC + * core to access correct regmap during DAPM path setup. + */ + snd_soc_component_init_regmap(cmpnt, ope->regmap); + + return 0; +} + +static const struct snd_soc_dai_ops tegra210_ope_dai_ops = { + .hw_params = tegra210_ope_hw_params, +}; + +static struct snd_soc_dai_driver tegra210_ope_dais[] = { + { + .name = "OPE-RX-CIF", + .playback = { + .stream_name = "RX-CIF-Playback", + .channels_min = 1, + .channels_max = 8, + .rates = SNDRV_PCM_RATE_8000_192000, + .formats = SNDRV_PCM_FMTBIT_S8 | + SNDRV_PCM_FMTBIT_S16_LE | + SNDRV_PCM_FMTBIT_S32_LE, + }, + .capture = { + .stream_name = "RX-CIF-Capture", + .channels_min = 1, + .channels_max = 8, + .rates = SNDRV_PCM_RATE_8000_192000, + .formats = SNDRV_PCM_FMTBIT_S8 | + SNDRV_PCM_FMTBIT_S16_LE | + SNDRV_PCM_FMTBIT_S32_LE, + }, + }, + { + .name = "OPE-TX-CIF", + .playback = { + .stream_name = "TX-CIF-Playback", + .channels_min = 1, + .channels_max = 8, + .rates = SNDRV_PCM_RATE_8000_192000, + .formats = SNDRV_PCM_FMTBIT_S8 | + SNDRV_PCM_FMTBIT_S16_LE | + SNDRV_PCM_FMTBIT_S32_LE, + }, + .capture = { + .stream_name = "TX-CIF-Capture", + .channels_min = 1, + .channels_max = 8, + .rates = SNDRV_PCM_RATE_8000_192000, + .formats = SNDRV_PCM_FMTBIT_S8 | + SNDRV_PCM_FMTBIT_S16_LE | + SNDRV_PCM_FMTBIT_S32_LE, + }, + .ops = &tegra210_ope_dai_ops, + } +}; + +static const struct snd_soc_dapm_widget tegra210_ope_widgets[] = { + SND_SOC_DAPM_AIF_IN("RX", NULL, 0, SND_SOC_NOPM, 0, 0), + SND_SOC_DAPM_AIF_OUT("TX", NULL, 0, TEGRA210_OPE_ENABLE, + TEGRA210_OPE_EN_SHIFT, 0), +}; + +#define OPE_ROUTES(sname) \ + { "RX XBAR-" sname, NULL, "XBAR-TX" }, \ + { "RX-CIF-" sname, NULL, "RX XBAR-" sname }, \ + { "RX", NULL, "RX-CIF-" sname }, \ + { "TX-CIF-" sname, NULL, "TX" }, \ + { "TX XBAR-" sname, NULL, "TX-CIF-" sname }, \ + { "XBAR-RX", NULL, "TX XBAR-" sname } + +static const struct snd_soc_dapm_route tegra210_ope_routes[] = { + { "TX", NULL, "RX" }, + OPE_ROUTES("Playback"), + OPE_ROUTES("Capture"), +}; + +static const char * const tegra210_ope_data_dir_text[] = { + "MBDRC to PEQ", + "PEQ to MBDRC" +}; + +static const struct soc_enum tegra210_ope_data_dir_enum = + SOC_ENUM_SINGLE(TEGRA210_OPE_DIR, TEGRA210_OPE_DIR_SHIFT, + 2, tegra210_ope_data_dir_text); + +static int tegra210_ope_get_data_dir(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + struct snd_soc_component *cmpnt = snd_soc_kcontrol_component(kcontrol); + struct tegra210_ope *ope = snd_soc_component_get_drvdata(cmpnt); + + ucontrol->value.enumerated.item[0] = ope->data_dir; + + return 0; +} + +static int tegra210_ope_put_data_dir(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + struct snd_soc_component *cmpnt = snd_soc_kcontrol_component(kcontrol); + struct tegra210_ope *ope = snd_soc_component_get_drvdata(cmpnt); + unsigned int value = ucontrol->value.enumerated.item[0]; + + if (value == ope->data_dir) + return 0; + + ope->data_dir = value; + + return 1; +} + +static const struct snd_kcontrol_new tegra210_ope_controls[] = { + SOC_ENUM_EXT("Data Flow Direction", tegra210_ope_data_dir_enum, + tegra210_ope_get_data_dir, tegra210_ope_put_data_dir), +}; + +static const struct snd_soc_component_driver tegra210_ope_cmpnt = { + .probe = tegra210_ope_component_probe, + .dapm_widgets = tegra210_ope_widgets, + .num_dapm_widgets = ARRAY_SIZE(tegra210_ope_widgets), + .dapm_routes = tegra210_ope_routes, + .num_dapm_routes = ARRAY_SIZE(tegra210_ope_routes), + .controls = tegra210_ope_controls, + .num_controls = ARRAY_SIZE(tegra210_ope_controls), +}; + +static bool tegra210_ope_wr_reg(struct device *dev, unsigned int reg) +{ + switch (reg) { + case TEGRA210_OPE_RX_INT_MASK ... TEGRA210_OPE_RX_CIF_CTRL: + case TEGRA210_OPE_TX_INT_MASK ... TEGRA210_OPE_TX_CIF_CTRL: + case TEGRA210_OPE_ENABLE ... TEGRA210_OPE_CG: + case TEGRA210_OPE_DIR: + return true; + default: + return false; + } +} + +static bool tegra210_ope_rd_reg(struct device *dev, unsigned int reg) +{ + if (tegra210_ope_wr_reg(dev, reg)) + return true; + + switch (reg) { + case TEGRA210_OPE_RX_STATUS: + case TEGRA210_OPE_RX_INT_STATUS: + case TEGRA210_OPE_TX_STATUS: + case TEGRA210_OPE_TX_INT_STATUS: + case TEGRA210_OPE_STATUS: + case TEGRA210_OPE_INT_STATUS: + return true; + default: + return false; + } +} + +static bool tegra210_ope_volatile_reg(struct device *dev, unsigned int reg) +{ + switch (reg) { + case TEGRA210_OPE_RX_STATUS: + case TEGRA210_OPE_RX_INT_STATUS: + case TEGRA210_OPE_TX_STATUS: + case TEGRA210_OPE_TX_INT_STATUS: + case TEGRA210_OPE_SOFT_RESET: + case TEGRA210_OPE_STATUS: + case TEGRA210_OPE_INT_STATUS: + return true; + default: + return false; + } +} + +static const struct regmap_config tegra210_ope_regmap_config = { + .reg_bits = 32, + .reg_stride = 4, + .val_bits = 32, + .max_register = TEGRA210_OPE_DIR, + .writeable_reg = tegra210_ope_wr_reg, + .readable_reg = tegra210_ope_rd_reg, + .volatile_reg = tegra210_ope_volatile_reg, + .reg_defaults = tegra210_ope_reg_defaults, + .num_reg_defaults = ARRAY_SIZE(tegra210_ope_reg_defaults), + .cache_type = REGCACHE_FLAT, +}; + +static int tegra210_ope_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct tegra210_ope *ope; + void __iomem *regs; + int err; + + ope = devm_kzalloc(dev, sizeof(*ope), GFP_KERNEL); + if (!ope) + return -ENOMEM; + + regs = devm_platform_ioremap_resource(pdev, 0); + if (IS_ERR(regs)) + return PTR_ERR(regs); + + ope->regmap = devm_regmap_init_mmio(dev, regs, + &tegra210_ope_regmap_config); + if (IS_ERR(ope->regmap)) { + dev_err(dev, "regmap init failed\n"); + return PTR_ERR(ope->regmap); + } + + regcache_cache_only(ope->regmap, true); + + dev_set_drvdata(dev, ope); + + err = tegra210_peq_regmap_init(pdev); + if (err < 0) { + dev_err(dev, "PEQ init failed\n"); + return err; + } + + err = tegra210_mbdrc_regmap_init(pdev); + if (err < 0) { + dev_err(dev, "MBDRC init failed\n"); + return err; + } + + err = devm_snd_soc_register_component(dev, &tegra210_ope_cmpnt, + tegra210_ope_dais, + ARRAY_SIZE(tegra210_ope_dais)); + if (err) { + dev_err(dev, "can't register OPE component, err: %d\n", err); + return err; + } + + pm_runtime_enable(dev); + + return 0; +} + +static int tegra210_ope_remove(struct platform_device *pdev) +{ + pm_runtime_disable(&pdev->dev); + + return 0; +} + +static int __maybe_unused tegra210_ope_runtime_suspend(struct device *dev) +{ + struct tegra210_ope *ope = dev_get_drvdata(dev); + + tegra210_peq_save(ope->peq_regmap, ope->peq_biquad_gains, + ope->peq_biquad_shifts); + + regcache_cache_only(ope->mbdrc_regmap, true); + regcache_cache_only(ope->peq_regmap, true); + regcache_cache_only(ope->regmap, true); + + regcache_mark_dirty(ope->regmap); + regcache_mark_dirty(ope->peq_regmap); + regcache_mark_dirty(ope->mbdrc_regmap); + + return 0; +} + +static int __maybe_unused tegra210_ope_runtime_resume(struct device *dev) +{ + struct tegra210_ope *ope = dev_get_drvdata(dev); + + regcache_cache_only(ope->regmap, false); + regcache_cache_only(ope->peq_regmap, false); + regcache_cache_only(ope->mbdrc_regmap, false); + + regcache_sync(ope->regmap); + regcache_sync(ope->peq_regmap); + regcache_sync(ope->mbdrc_regmap); + + tegra210_peq_restore(ope->peq_regmap, ope->peq_biquad_gains, + ope->peq_biquad_shifts); + + return 0; +} + +static const struct dev_pm_ops tegra210_ope_pm_ops = { + SET_RUNTIME_PM_OPS(tegra210_ope_runtime_suspend, + tegra210_ope_runtime_resume, NULL) + SET_SYSTEM_SLEEP_PM_OPS(pm_runtime_force_suspend, + pm_runtime_force_resume) +}; + +static const struct of_device_id tegra210_ope_of_match[] = { + { .compatible = "nvidia,tegra210-ope" }, + {}, +}; +MODULE_DEVICE_TABLE(of, tegra210_ope_of_match); + +static struct platform_driver tegra210_ope_driver = { + .driver = { + .name = "tegra210-ope", + .of_match_table = tegra210_ope_of_match, + .pm = &tegra210_ope_pm_ops, + }, + .probe = tegra210_ope_probe, + .remove = tegra210_ope_remove, +}; +module_platform_driver(tegra210_ope_driver) + +MODULE_AUTHOR("Sumit Bhattacharya "); +MODULE_DESCRIPTION("Tegra210 OPE ASoC driver"); +MODULE_LICENSE("GPL"); -- cgit v1.2.3