From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- sound/soc/ti/ams-delta.c | 607 +++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 607 insertions(+) create mode 100644 sound/soc/ti/ams-delta.c (limited to 'sound/soc/ti/ams-delta.c') diff --git a/sound/soc/ti/ams-delta.c b/sound/soc/ti/ams-delta.c new file mode 100644 index 000000000..438e2fa84 --- /dev/null +++ b/sound/soc/ti/ams-delta.c @@ -0,0 +1,607 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * ams-delta.c -- SoC audio for Amstrad E3 (Delta) videophone + * + * Copyright (C) 2009 Janusz Krzysztofik + * + * Initially based on sound/soc/omap/osk5912.x + * Copyright (C) 2008 Mistral Solutions + */ + +#include +#include +#include +#include + +#include +#include + +#include + +#include + +#include "omap-mcbsp.h" +#include "../codecs/cx20442.h" + +static struct gpio_desc *handset_mute; +static struct gpio_desc *handsfree_mute; + +static int ams_delta_event_handset(struct snd_soc_dapm_widget *w, + struct snd_kcontrol *k, int event) +{ + gpiod_set_value_cansleep(handset_mute, !SND_SOC_DAPM_EVENT_ON(event)); + return 0; +} + +static int ams_delta_event_handsfree(struct snd_soc_dapm_widget *w, + struct snd_kcontrol *k, int event) +{ + gpiod_set_value_cansleep(handsfree_mute, !SND_SOC_DAPM_EVENT_ON(event)); + return 0; +} + +/* Board specific DAPM widgets */ +static const struct snd_soc_dapm_widget ams_delta_dapm_widgets[] = { + /* Handset */ + SND_SOC_DAPM_MIC("Mouthpiece", NULL), + SND_SOC_DAPM_HP("Earpiece", ams_delta_event_handset), + /* Handsfree/Speakerphone */ + SND_SOC_DAPM_MIC("Microphone", NULL), + SND_SOC_DAPM_SPK("Speaker", ams_delta_event_handsfree), +}; + +/* How they are connected to codec pins */ +static const struct snd_soc_dapm_route ams_delta_audio_map[] = { + {"TELIN", NULL, "Mouthpiece"}, + {"Earpiece", NULL, "TELOUT"}, + + {"MIC", NULL, "Microphone"}, + {"Speaker", NULL, "SPKOUT"}, +}; + +/* + * Controls, functional after the modem line discipline is activated. + */ + +/* Virtual switch: audio input/output constellations */ +static const char *ams_delta_audio_mode[] = + {"Mixed", "Handset", "Handsfree", "Speakerphone"}; + +/* Selection <-> pin translation */ +#define AMS_DELTA_MOUTHPIECE 0 +#define AMS_DELTA_EARPIECE 1 +#define AMS_DELTA_MICROPHONE 2 +#define AMS_DELTA_SPEAKER 3 +#define AMS_DELTA_AGC 4 + +#define AMS_DELTA_MIXED ((1 << AMS_DELTA_EARPIECE) | \ + (1 << AMS_DELTA_MICROPHONE)) +#define AMS_DELTA_HANDSET ((1 << AMS_DELTA_MOUTHPIECE) | \ + (1 << AMS_DELTA_EARPIECE)) +#define AMS_DELTA_HANDSFREE ((1 << AMS_DELTA_MICROPHONE) | \ + (1 << AMS_DELTA_SPEAKER)) +#define AMS_DELTA_SPEAKERPHONE (AMS_DELTA_HANDSFREE | (1 << AMS_DELTA_AGC)) + +static const unsigned short ams_delta_audio_mode_pins[] = { + AMS_DELTA_MIXED, + AMS_DELTA_HANDSET, + AMS_DELTA_HANDSFREE, + AMS_DELTA_SPEAKERPHONE, +}; + +static unsigned short ams_delta_audio_agc; + +/* + * Used for passing a codec structure pointer + * from the board initialization code to the tty line discipline. + */ +static struct snd_soc_component *cx20442_codec; + +static int ams_delta_set_audio_mode(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + struct snd_soc_card *card = snd_kcontrol_chip(kcontrol); + struct snd_soc_dapm_context *dapm = &card->dapm; + struct soc_enum *control = (struct soc_enum *)kcontrol->private_value; + unsigned short pins; + int pin, changed = 0; + + /* Refuse any mode changes if we are not able to control the codec. */ + if (!cx20442_codec->card->pop_time) + return -EUNATCH; + + if (ucontrol->value.enumerated.item[0] >= control->items) + return -EINVAL; + + snd_soc_dapm_mutex_lock(dapm); + + /* Translate selection to bitmap */ + pins = ams_delta_audio_mode_pins[ucontrol->value.enumerated.item[0]]; + + /* Setup pins after corresponding bits if changed */ + pin = !!(pins & (1 << AMS_DELTA_MOUTHPIECE)); + + if (pin != snd_soc_dapm_get_pin_status(dapm, "Mouthpiece")) { + changed = 1; + if (pin) + snd_soc_dapm_enable_pin_unlocked(dapm, "Mouthpiece"); + else + snd_soc_dapm_disable_pin_unlocked(dapm, "Mouthpiece"); + } + pin = !!(pins & (1 << AMS_DELTA_EARPIECE)); + if (pin != snd_soc_dapm_get_pin_status(dapm, "Earpiece")) { + changed = 1; + if (pin) + snd_soc_dapm_enable_pin_unlocked(dapm, "Earpiece"); + else + snd_soc_dapm_disable_pin_unlocked(dapm, "Earpiece"); + } + pin = !!(pins & (1 << AMS_DELTA_MICROPHONE)); + if (pin != snd_soc_dapm_get_pin_status(dapm, "Microphone")) { + changed = 1; + if (pin) + snd_soc_dapm_enable_pin_unlocked(dapm, "Microphone"); + else + snd_soc_dapm_disable_pin_unlocked(dapm, "Microphone"); + } + pin = !!(pins & (1 << AMS_DELTA_SPEAKER)); + if (pin != snd_soc_dapm_get_pin_status(dapm, "Speaker")) { + changed = 1; + if (pin) + snd_soc_dapm_enable_pin_unlocked(dapm, "Speaker"); + else + snd_soc_dapm_disable_pin_unlocked(dapm, "Speaker"); + } + pin = !!(pins & (1 << AMS_DELTA_AGC)); + if (pin != ams_delta_audio_agc) { + ams_delta_audio_agc = pin; + changed = 1; + if (pin) + snd_soc_dapm_enable_pin_unlocked(dapm, "AGCIN"); + else + snd_soc_dapm_disable_pin_unlocked(dapm, "AGCIN"); + } + + if (changed) + snd_soc_dapm_sync_unlocked(dapm); + + snd_soc_dapm_mutex_unlock(dapm); + + return changed; +} + +static int ams_delta_get_audio_mode(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + struct snd_soc_card *card = snd_kcontrol_chip(kcontrol); + struct snd_soc_dapm_context *dapm = &card->dapm; + unsigned short pins, mode; + + pins = ((snd_soc_dapm_get_pin_status(dapm, "Mouthpiece") << + AMS_DELTA_MOUTHPIECE) | + (snd_soc_dapm_get_pin_status(dapm, "Earpiece") << + AMS_DELTA_EARPIECE)); + if (pins) + pins |= (snd_soc_dapm_get_pin_status(dapm, "Microphone") << + AMS_DELTA_MICROPHONE); + else + pins = ((snd_soc_dapm_get_pin_status(dapm, "Microphone") << + AMS_DELTA_MICROPHONE) | + (snd_soc_dapm_get_pin_status(dapm, "Speaker") << + AMS_DELTA_SPEAKER) | + (ams_delta_audio_agc << AMS_DELTA_AGC)); + + for (mode = 0; mode < ARRAY_SIZE(ams_delta_audio_mode); mode++) + if (pins == ams_delta_audio_mode_pins[mode]) + break; + + if (mode >= ARRAY_SIZE(ams_delta_audio_mode)) + return -EINVAL; + + ucontrol->value.enumerated.item[0] = mode; + + return 0; +} + +static SOC_ENUM_SINGLE_EXT_DECL(ams_delta_audio_enum, + ams_delta_audio_mode); + +static const struct snd_kcontrol_new ams_delta_audio_controls[] = { + SOC_ENUM_EXT("Audio Mode", ams_delta_audio_enum, + ams_delta_get_audio_mode, ams_delta_set_audio_mode), +}; + +/* Hook switch */ +static struct snd_soc_jack ams_delta_hook_switch; +static struct snd_soc_jack_gpio ams_delta_hook_switch_gpios[] = { + { + .name = "hook_switch", + .report = SND_JACK_HEADSET, + .invert = 1, + .debounce_time = 150, + } +}; + +/* After we are able to control the codec over the modem, + * the hook switch can be used for dynamic DAPM reconfiguration. */ +static struct snd_soc_jack_pin ams_delta_hook_switch_pins[] = { + /* Handset */ + { + .pin = "Mouthpiece", + .mask = SND_JACK_MICROPHONE, + }, + { + .pin = "Earpiece", + .mask = SND_JACK_HEADPHONE, + }, + /* Handsfree */ + { + .pin = "Microphone", + .mask = SND_JACK_MICROPHONE, + .invert = 1, + }, + { + .pin = "Speaker", + .mask = SND_JACK_HEADPHONE, + .invert = 1, + }, +}; + + +/* + * Modem line discipline, required for making above controls functional. + * Activated from userspace with ldattach, possibly invoked from udev rule. + */ + +/* To actually apply any modem controlled configuration changes to the codec, + * we must connect codec DAI pins to the modem for a moment. Be careful not + * to interfere with our digital mute function that shares the same hardware. */ +static struct timer_list cx81801_timer; +static bool cx81801_cmd_pending; +static bool ams_delta_muted; +static DEFINE_SPINLOCK(ams_delta_lock); +static struct gpio_desc *gpiod_modem_codec; + +static void cx81801_timeout(struct timer_list *unused) +{ + int muted; + + spin_lock(&ams_delta_lock); + cx81801_cmd_pending = 0; + muted = ams_delta_muted; + spin_unlock(&ams_delta_lock); + + /* Reconnect the codec DAI back from the modem to the CPU DAI + * only if digital mute still off */ + if (!muted) + gpiod_set_value(gpiod_modem_codec, 0); +} + +/* Line discipline .open() */ +static int cx81801_open(struct tty_struct *tty) +{ + int ret; + + if (!cx20442_codec) + return -ENODEV; + + /* + * Pass the codec structure pointer for use by other ldisc callbacks, + * both the card and the codec specific parts. + */ + tty->disc_data = cx20442_codec; + + ret = v253_ops.open(tty); + + if (ret < 0) + tty->disc_data = NULL; + + return ret; +} + +/* Line discipline .close() */ +static void cx81801_close(struct tty_struct *tty) +{ + struct snd_soc_component *component = tty->disc_data; + struct snd_soc_dapm_context *dapm = &component->card->dapm; + + del_timer_sync(&cx81801_timer); + + /* Prevent the hook switch from further changing the DAPM pins */ + INIT_LIST_HEAD(&ams_delta_hook_switch.pins); + + if (!component) + return; + + v253_ops.close(tty); + + /* Revert back to default audio input/output constellation */ + snd_soc_dapm_mutex_lock(dapm); + + snd_soc_dapm_disable_pin_unlocked(dapm, "Mouthpiece"); + snd_soc_dapm_enable_pin_unlocked(dapm, "Earpiece"); + snd_soc_dapm_enable_pin_unlocked(dapm, "Microphone"); + snd_soc_dapm_disable_pin_unlocked(dapm, "Speaker"); + snd_soc_dapm_disable_pin_unlocked(dapm, "AGCIN"); + + snd_soc_dapm_sync_unlocked(dapm); + + snd_soc_dapm_mutex_unlock(dapm); +} + +/* Line discipline .hangup() */ +static void cx81801_hangup(struct tty_struct *tty) +{ + cx81801_close(tty); +} + +/* Line discipline .receive_buf() */ +static void cx81801_receive(struct tty_struct *tty, const unsigned char *cp, + const char *fp, int count) +{ + struct snd_soc_component *component = tty->disc_data; + const unsigned char *c; + int apply, ret; + + if (!component) + return; + + if (!component->card->pop_time) { + /* First modem response, complete setup procedure */ + + /* Initialize timer used for config pulse generation */ + timer_setup(&cx81801_timer, cx81801_timeout, 0); + + v253_ops.receive_buf(tty, cp, fp, count); + + /* Link hook switch to DAPM pins */ + ret = snd_soc_jack_add_pins(&ams_delta_hook_switch, + ARRAY_SIZE(ams_delta_hook_switch_pins), + ams_delta_hook_switch_pins); + if (ret) + dev_warn(component->dev, + "Failed to link hook switch to DAPM pins, " + "will continue with hook switch unlinked.\n"); + + return; + } + + v253_ops.receive_buf(tty, cp, fp, count); + + for (c = &cp[count - 1]; c >= cp; c--) { + if (*c != '\r') + continue; + /* Complete modem response received, apply config to codec */ + + spin_lock_bh(&ams_delta_lock); + mod_timer(&cx81801_timer, jiffies + msecs_to_jiffies(150)); + apply = !ams_delta_muted && !cx81801_cmd_pending; + cx81801_cmd_pending = 1; + spin_unlock_bh(&ams_delta_lock); + + /* Apply config pulse by connecting the codec to the modem + * if not already done */ + if (apply) + gpiod_set_value(gpiod_modem_codec, 1); + break; + } +} + +/* Line discipline .write_wakeup() */ +static void cx81801_wakeup(struct tty_struct *tty) +{ + v253_ops.write_wakeup(tty); +} + +static struct tty_ldisc_ops cx81801_ops = { + .name = "cx81801", + .num = N_V253, + .owner = THIS_MODULE, + .open = cx81801_open, + .close = cx81801_close, + .hangup = cx81801_hangup, + .receive_buf = cx81801_receive, + .write_wakeup = cx81801_wakeup, +}; + + +/* + * Even if not very useful, the sound card can still work without any of the + * above functionality activated. You can still control its audio input/output + * constellation and speakerphone gain from userspace by issuing AT commands + * over the modem port. + */ + +static struct snd_soc_ops ams_delta_ops; + + +/* Digital mute implemented using modem/CPU multiplexer. + * Shares hardware with codec config pulse generation */ +static bool ams_delta_muted = 1; + +static int ams_delta_mute(struct snd_soc_dai *dai, int mute, int direction) +{ + int apply; + + if (ams_delta_muted == mute) + return 0; + + spin_lock_bh(&ams_delta_lock); + ams_delta_muted = mute; + apply = !cx81801_cmd_pending; + spin_unlock_bh(&ams_delta_lock); + + if (apply) + gpiod_set_value(gpiod_modem_codec, !!mute); + return 0; +} + +/* Our codec DAI probably doesn't have its own .ops structure */ +static const struct snd_soc_dai_ops ams_delta_dai_ops = { + .mute_stream = ams_delta_mute, + .no_capture_mute = 1, +}; + +/* Will be used if the codec ever has its own digital_mute function */ +static int ams_delta_startup(struct snd_pcm_substream *substream) +{ + return ams_delta_mute(NULL, 0, substream->stream); +} + +static void ams_delta_shutdown(struct snd_pcm_substream *substream) +{ + ams_delta_mute(NULL, 1, substream->stream); +} + + +/* + * Card initialization + */ + +static int ams_delta_cx20442_init(struct snd_soc_pcm_runtime *rtd) +{ + struct snd_soc_dai *codec_dai = asoc_rtd_to_codec(rtd, 0); + struct snd_soc_card *card = rtd->card; + struct snd_soc_dapm_context *dapm = &card->dapm; + int ret; + /* Codec is ready, now add/activate board specific controls */ + + /* Store a pointer to the codec structure for tty ldisc use */ + cx20442_codec = asoc_rtd_to_codec(rtd, 0)->component; + + /* Add hook switch - can be used to control the codec from userspace + * even if line discipline fails */ + ret = snd_soc_card_jack_new_pins(card, "hook_switch", SND_JACK_HEADSET, + &ams_delta_hook_switch, NULL, 0); + if (ret) + dev_warn(card->dev, + "Failed to allocate resources for hook switch, " + "will continue without one.\n"); + else { + ret = snd_soc_jack_add_gpiods(card->dev, &ams_delta_hook_switch, + ARRAY_SIZE(ams_delta_hook_switch_gpios), + ams_delta_hook_switch_gpios); + if (ret) + dev_warn(card->dev, + "Failed to set up hook switch GPIO line, " + "will continue with hook switch inactive.\n"); + } + + gpiod_modem_codec = devm_gpiod_get(card->dev, "modem_codec", + GPIOD_OUT_HIGH); + if (IS_ERR(gpiod_modem_codec)) { + dev_warn(card->dev, "Failed to obtain modem_codec GPIO\n"); + return 0; + } + + /* Set up digital mute if not provided by the codec */ + if (!codec_dai->driver->ops) { + codec_dai->driver->ops = &ams_delta_dai_ops; + } else { + ams_delta_ops.startup = ams_delta_startup; + ams_delta_ops.shutdown = ams_delta_shutdown; + } + + /* Register optional line discipline for over the modem control */ + ret = tty_register_ldisc(&cx81801_ops); + if (ret) { + dev_warn(card->dev, + "Failed to register line discipline, " + "will continue without any controls.\n"); + return 0; + } + + /* Set up initial pin constellation */ + snd_soc_dapm_disable_pin(dapm, "Mouthpiece"); + snd_soc_dapm_disable_pin(dapm, "Speaker"); + snd_soc_dapm_disable_pin(dapm, "AGCIN"); + snd_soc_dapm_disable_pin(dapm, "AGCOUT"); + + return 0; +} + +/* DAI glue - connects codec <--> CPU */ +SND_SOC_DAILINK_DEFS(cx20442, + DAILINK_COMP_ARRAY(COMP_CPU("omap-mcbsp.1")), + DAILINK_COMP_ARRAY(COMP_CODEC("cx20442-codec", "cx20442-voice")), + DAILINK_COMP_ARRAY(COMP_PLATFORM("omap-mcbsp.1"))); + +static struct snd_soc_dai_link ams_delta_dai_link = { + .name = "CX20442", + .stream_name = "CX20442", + .init = ams_delta_cx20442_init, + .ops = &ams_delta_ops, + .dai_fmt = SND_SOC_DAIFMT_DSP_A | SND_SOC_DAIFMT_NB_NF | + SND_SOC_DAIFMT_CBM_CFM, + SND_SOC_DAILINK_REG(cx20442), +}; + +/* Audio card driver */ +static struct snd_soc_card ams_delta_audio_card = { + .name = "AMS_DELTA", + .owner = THIS_MODULE, + .dai_link = &ams_delta_dai_link, + .num_links = 1, + + .controls = ams_delta_audio_controls, + .num_controls = ARRAY_SIZE(ams_delta_audio_controls), + .dapm_widgets = ams_delta_dapm_widgets, + .num_dapm_widgets = ARRAY_SIZE(ams_delta_dapm_widgets), + .dapm_routes = ams_delta_audio_map, + .num_dapm_routes = ARRAY_SIZE(ams_delta_audio_map), +}; + +/* Module init/exit */ +static int ams_delta_probe(struct platform_device *pdev) +{ + struct snd_soc_card *card = &ams_delta_audio_card; + int ret; + + card->dev = &pdev->dev; + + handset_mute = devm_gpiod_get(card->dev, "handset_mute", + GPIOD_OUT_HIGH); + if (IS_ERR(handset_mute)) + return PTR_ERR(handset_mute); + + handsfree_mute = devm_gpiod_get(card->dev, "handsfree_mute", + GPIOD_OUT_HIGH); + if (IS_ERR(handsfree_mute)) + return PTR_ERR(handsfree_mute); + + ret = snd_soc_register_card(card); + if (ret) { + dev_err(&pdev->dev, "snd_soc_register_card failed (%d)\n", ret); + card->dev = NULL; + return ret; + } + return 0; +} + +static int ams_delta_remove(struct platform_device *pdev) +{ + struct snd_soc_card *card = platform_get_drvdata(pdev); + + tty_unregister_ldisc(&cx81801_ops); + + snd_soc_unregister_card(card); + card->dev = NULL; + return 0; +} + +#define DRV_NAME "ams-delta-audio" + +static struct platform_driver ams_delta_driver = { + .driver = { + .name = DRV_NAME, + }, + .probe = ams_delta_probe, + .remove = ams_delta_remove, +}; + +module_platform_driver(ams_delta_driver); + +MODULE_AUTHOR("Janusz Krzysztofik "); +MODULE_DESCRIPTION("ALSA SoC driver for Amstrad E3 (Delta) videophone"); +MODULE_LICENSE("GPL"); +MODULE_ALIAS("platform:" DRV_NAME); -- cgit v1.2.3