From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- sound/soc/ux500/ux500_msp_i2s.h | 497 ++++++++++++++++++++++++++++++++++++++++ 1 file changed, 497 insertions(+) create mode 100644 sound/soc/ux500/ux500_msp_i2s.h (limited to 'sound/soc/ux500/ux500_msp_i2s.h') diff --git a/sound/soc/ux500/ux500_msp_i2s.h b/sound/soc/ux500/ux500_msp_i2s.h new file mode 100644 index 000000000..d45b5e283 --- /dev/null +++ b/sound/soc/ux500/ux500_msp_i2s.h @@ -0,0 +1,497 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* + * Copyright (C) ST-Ericsson SA 2012 + * + * Author: Ola Lilja , + * for ST-Ericsson. + */ + + +#ifndef UX500_MSP_I2S_H +#define UX500_MSP_I2S_H + +#include +#include + +#define MSP_INPUT_FREQ_APB 48000000 + +/*** Stereo mode. Used for APB data accesses as 16 bits accesses (mono), + * 32 bits accesses (stereo). + ***/ +enum msp_stereo_mode { + MSP_MONO, + MSP_STEREO +}; + +/* Direction (Transmit/Receive mode) */ +enum msp_direction { + MSP_TX = 1, + MSP_RX = 2 +}; + +/* Transmit and receive configuration register */ +#define MSP_BIG_ENDIAN 0x00000000 +#define MSP_LITTLE_ENDIAN 0x00001000 +#define MSP_UNEXPECTED_FS_ABORT 0x00000000 +#define MSP_UNEXPECTED_FS_IGNORE 0x00008000 +#define MSP_NON_MODE_BIT_MASK 0x00009000 + +/* Global configuration register */ +#define RX_ENABLE 0x00000001 +#define RX_FIFO_ENABLE 0x00000002 +#define RX_SYNC_SRG 0x00000010 +#define RX_CLK_POL_RISING 0x00000020 +#define RX_CLK_SEL_SRG 0x00000040 +#define TX_ENABLE 0x00000100 +#define TX_FIFO_ENABLE 0x00000200 +#define TX_SYNC_SRG_PROG 0x00001800 +#define TX_SYNC_SRG_AUTO 0x00001000 +#define TX_CLK_POL_RISING 0x00002000 +#define TX_CLK_SEL_SRG 0x00004000 +#define TX_EXTRA_DELAY_ENABLE 0x00008000 +#define SRG_ENABLE 0x00010000 +#define FRAME_GEN_ENABLE 0x00100000 +#define SRG_CLK_SEL_APB 0x00000000 +#define RX_FIFO_SYNC_HI 0x00000000 +#define TX_FIFO_SYNC_HI 0x00000000 +#define SPI_CLK_MODE_NORMAL 0x00000000 + +#define MSP_FRAME_SIZE_AUTO -1 + +#define MSP_DR 0x00 +#define MSP_GCR 0x04 +#define MSP_TCF 0x08 +#define MSP_RCF 0x0c +#define MSP_SRG 0x10 +#define MSP_FLR 0x14 +#define MSP_DMACR 0x18 + +#define MSP_IMSC 0x20 +#define MSP_RIS 0x24 +#define MSP_MIS 0x28 +#define MSP_ICR 0x2c +#define MSP_MCR 0x30 +#define MSP_RCV 0x34 +#define MSP_RCM 0x38 + +#define MSP_TCE0 0x40 +#define MSP_TCE1 0x44 +#define MSP_TCE2 0x48 +#define MSP_TCE3 0x4c + +#define MSP_RCE0 0x60 +#define MSP_RCE1 0x64 +#define MSP_RCE2 0x68 +#define MSP_RCE3 0x6c +#define MSP_IODLY 0x70 + +#define MSP_ITCR 0x80 +#define MSP_ITIP 0x84 +#define MSP_ITOP 0x88 +#define MSP_TSTDR 0x8c + +#define MSP_PID0 0xfe0 +#define MSP_PID1 0xfe4 +#define MSP_PID2 0xfe8 +#define MSP_PID3 0xfec + +#define MSP_CID0 0xff0 +#define MSP_CID1 0xff4 +#define MSP_CID2 0xff8 +#define MSP_CID3 0xffc + +/* Protocol dependant parameters list */ +#define RX_ENABLE_MASK BIT(0) +#define RX_FIFO_ENABLE_MASK BIT(1) +#define RX_FSYNC_MASK BIT(2) +#define DIRECT_COMPANDING_MASK BIT(3) +#define RX_SYNC_SEL_MASK BIT(4) +#define RX_CLK_POL_MASK BIT(5) +#define RX_CLK_SEL_MASK BIT(6) +#define LOOPBACK_MASK BIT(7) +#define TX_ENABLE_MASK BIT(8) +#define TX_FIFO_ENABLE_MASK BIT(9) +#define TX_FSYNC_MASK BIT(10) +#define TX_MSP_TDR_TSR BIT(11) +#define TX_SYNC_SEL_MASK (BIT(12) | BIT(11)) +#define TX_CLK_POL_MASK BIT(13) +#define TX_CLK_SEL_MASK BIT(14) +#define TX_EXTRA_DELAY_MASK BIT(15) +#define SRG_ENABLE_MASK BIT(16) +#define SRG_CLK_POL_MASK BIT(17) +#define SRG_CLK_SEL_MASK (BIT(19) | BIT(18)) +#define FRAME_GEN_EN_MASK BIT(20) +#define SPI_CLK_MODE_MASK (BIT(22) | BIT(21)) +#define SPI_BURST_MODE_MASK BIT(23) + +#define RXEN_SHIFT 0 +#define RFFEN_SHIFT 1 +#define RFSPOL_SHIFT 2 +#define DCM_SHIFT 3 +#define RFSSEL_SHIFT 4 +#define RCKPOL_SHIFT 5 +#define RCKSEL_SHIFT 6 +#define LBM_SHIFT 7 +#define TXEN_SHIFT 8 +#define TFFEN_SHIFT 9 +#define TFSPOL_SHIFT 10 +#define TFSSEL_SHIFT 11 +#define TCKPOL_SHIFT 13 +#define TCKSEL_SHIFT 14 +#define TXDDL_SHIFT 15 +#define SGEN_SHIFT 16 +#define SCKPOL_SHIFT 17 +#define SCKSEL_SHIFT 18 +#define FGEN_SHIFT 20 +#define SPICKM_SHIFT 21 +#define TBSWAP_SHIFT 28 + +#define RCKPOL_MASK BIT(0) +#define TCKPOL_MASK BIT(0) +#define SPICKM_MASK (BIT(1) | BIT(0)) +#define MSP_RX_CLKPOL_BIT(n) ((n & RCKPOL_MASK) << RCKPOL_SHIFT) +#define MSP_TX_CLKPOL_BIT(n) ((n & TCKPOL_MASK) << TCKPOL_SHIFT) + +#define P1ELEN_SHIFT 0 +#define P1FLEN_SHIFT 3 +#define DTYP_SHIFT 10 +#define ENDN_SHIFT 12 +#define DDLY_SHIFT 13 +#define FSIG_SHIFT 15 +#define P2ELEN_SHIFT 16 +#define P2FLEN_SHIFT 19 +#define P2SM_SHIFT 26 +#define P2EN_SHIFT 27 +#define FSYNC_SHIFT 15 + +#define P1ELEN_MASK 0x00000007 +#define P2ELEN_MASK 0x00070000 +#define P1FLEN_MASK 0x00000378 +#define P2FLEN_MASK 0x03780000 +#define DDLY_MASK 0x00003000 +#define DTYP_MASK 0x00000600 +#define P2SM_MASK 0x04000000 +#define P2EN_MASK 0x08000000 +#define ENDN_MASK 0x00001000 +#define TFSPOL_MASK 0x00000400 +#define TBSWAP_MASK 0x30000000 +#define COMPANDING_MODE_MASK 0x00000c00 +#define FSYNC_MASK 0x00008000 + +#define MSP_P1_ELEM_LEN_BITS(n) (n & P1ELEN_MASK) +#define MSP_P2_ELEM_LEN_BITS(n) (((n) << P2ELEN_SHIFT) & P2ELEN_MASK) +#define MSP_P1_FRAME_LEN_BITS(n) (((n) << P1FLEN_SHIFT) & P1FLEN_MASK) +#define MSP_P2_FRAME_LEN_BITS(n) (((n) << P2FLEN_SHIFT) & P2FLEN_MASK) +#define MSP_DATA_DELAY_BITS(n) (((n) << DDLY_SHIFT) & DDLY_MASK) +#define MSP_DATA_TYPE_BITS(n) (((n) << DTYP_SHIFT) & DTYP_MASK) +#define MSP_P2_START_MODE_BIT(n) ((n << P2SM_SHIFT) & P2SM_MASK) +#define MSP_P2_ENABLE_BIT(n) ((n << P2EN_SHIFT) & P2EN_MASK) +#define MSP_SET_ENDIANNES_BIT(n) ((n << ENDN_SHIFT) & ENDN_MASK) +#define MSP_FSYNC_POL(n) ((n << TFSPOL_SHIFT) & TFSPOL_MASK) +#define MSP_DATA_WORD_SWAP(n) ((n << TBSWAP_SHIFT) & TBSWAP_MASK) +#define MSP_SET_COMPANDING_MODE(n) ((n << DTYP_SHIFT) & \ + COMPANDING_MODE_MASK) +#define MSP_SET_FSYNC_IGNORE(n) ((n << FSYNC_SHIFT) & FSYNC_MASK) + +/* Flag register */ +#define RX_BUSY BIT(0) +#define RX_FIFO_EMPTY BIT(1) +#define RX_FIFO_FULL BIT(2) +#define TX_BUSY BIT(3) +#define TX_FIFO_EMPTY BIT(4) +#define TX_FIFO_FULL BIT(5) + +#define RBUSY_SHIFT 0 +#define RFE_SHIFT 1 +#define RFU_SHIFT 2 +#define TBUSY_SHIFT 3 +#define TFE_SHIFT 4 +#define TFU_SHIFT 5 + +/* Multichannel control register */ +#define RMCEN_SHIFT 0 +#define RMCSF_SHIFT 1 +#define RCMPM_SHIFT 3 +#define TMCEN_SHIFT 5 +#define TNCSF_SHIFT 6 + +/* Sample rate generator register */ +#define SCKDIV_SHIFT 0 +#define FRWID_SHIFT 10 +#define FRPER_SHIFT 16 + +#define SCK_DIV_MASK 0x0000003FF +#define FRAME_WIDTH_BITS(n) (((n) << FRWID_SHIFT) & 0x0000FC00) +#define FRAME_PERIOD_BITS(n) (((n) << FRPER_SHIFT) & 0x1FFF0000) + +/* DMA controller register */ +#define RX_DMA_ENABLE BIT(0) +#define TX_DMA_ENABLE BIT(1) + +#define RDMAE_SHIFT 0 +#define TDMAE_SHIFT 1 + +/* Interrupt Register */ +#define RX_SERVICE_INT BIT(0) +#define RX_OVERRUN_ERROR_INT BIT(1) +#define RX_FSYNC_ERR_INT BIT(2) +#define RX_FSYNC_INT BIT(3) +#define TX_SERVICE_INT BIT(4) +#define TX_UNDERRUN_ERR_INT BIT(5) +#define TX_FSYNC_ERR_INT BIT(6) +#define TX_FSYNC_INT BIT(7) +#define ALL_INT 0x000000ff + +/* MSP test control register */ +#define MSP_ITCR_ITEN BIT(0) +#define MSP_ITCR_TESTFIFO BIT(1) + +#define RMCEN_BIT 0 +#define RMCSF_BIT 1 +#define RCMPM_BIT 3 +#define TMCEN_BIT 5 +#define TNCSF_BIT 6 + +/* Single or dual phase mode */ +enum msp_phase_mode { + MSP_SINGLE_PHASE, + MSP_DUAL_PHASE +}; + +/* Frame length */ +enum msp_frame_length { + MSP_FRAME_LEN_1 = 0, + MSP_FRAME_LEN_2 = 1, + MSP_FRAME_LEN_4 = 3, + MSP_FRAME_LEN_8 = 7, + MSP_FRAME_LEN_12 = 11, + MSP_FRAME_LEN_16 = 15, + MSP_FRAME_LEN_20 = 19, + MSP_FRAME_LEN_32 = 31, + MSP_FRAME_LEN_48 = 47, + MSP_FRAME_LEN_64 = 63 +}; + +/* Element length */ +enum msp_elem_length { + MSP_ELEM_LEN_8 = 0, + MSP_ELEM_LEN_10 = 1, + MSP_ELEM_LEN_12 = 2, + MSP_ELEM_LEN_14 = 3, + MSP_ELEM_LEN_16 = 4, + MSP_ELEM_LEN_20 = 5, + MSP_ELEM_LEN_24 = 6, + MSP_ELEM_LEN_32 = 7 +}; + +enum msp_data_xfer_width { + MSP_DATA_TRANSFER_WIDTH_BYTE, + MSP_DATA_TRANSFER_WIDTH_HALFWORD, + MSP_DATA_TRANSFER_WIDTH_WORD +}; + +enum msp_frame_sync { + MSP_FSYNC_UNIGNORE = 0, + MSP_FSYNC_IGNORE = 1, +}; + +enum msp_phase2_start_mode { + MSP_PHASE2_START_MODE_IMEDIATE, + MSP_PHASE2_START_MODE_FSYNC +}; + +enum msp_btf { + MSP_BTF_MS_BIT_FIRST = 0, + MSP_BTF_LS_BIT_FIRST = 1 +}; + +enum msp_fsync_pol { + MSP_FSYNC_POL_ACT_HI = 0, + MSP_FSYNC_POL_ACT_LO = 1 +}; + +/* Data delay (in bit clock cycles) */ +enum msp_delay { + MSP_DELAY_0 = 0, + MSP_DELAY_1 = 1, + MSP_DELAY_2 = 2, + MSP_DELAY_3 = 3 +}; + +/* Configurations of clocks (transmit, receive or sample rate generator) */ +enum msp_edge { + MSP_FALLING_EDGE = 0, + MSP_RISING_EDGE = 1, +}; + +enum msp_hws { + MSP_SWAP_NONE = 0, + MSP_SWAP_BYTE_PER_WORD = 1, + MSP_SWAP_BYTE_PER_HALF_WORD = 2, + MSP_SWAP_HALF_WORD_PER_WORD = 3 +}; + +enum msp_compress_mode { + MSP_COMPRESS_MODE_LINEAR = 0, + MSP_COMPRESS_MODE_MU_LAW = 2, + MSP_COMPRESS_MODE_A_LAW = 3 +}; + +enum msp_expand_mode { + MSP_EXPAND_MODE_LINEAR = 0, + MSP_EXPAND_MODE_LINEAR_SIGNED = 1, + MSP_EXPAND_MODE_MU_LAW = 2, + MSP_EXPAND_MODE_A_LAW = 3 +}; + +#define MSP_FRAME_PERIOD_IN_MONO_MODE 256 +#define MSP_FRAME_PERIOD_IN_STEREO_MODE 32 +#define MSP_FRAME_WIDTH_IN_STEREO_MODE 16 + +enum msp_protocol { + MSP_I2S_PROTOCOL, + MSP_PCM_PROTOCOL, + MSP_PCM_COMPAND_PROTOCOL, + MSP_INVALID_PROTOCOL +}; + +/* + * No of registers to backup during + * suspend resume + */ +#define MAX_MSP_BACKUP_REGS 36 + +enum i2s_direction_t { + MSP_DIR_TX = 0x01, + MSP_DIR_RX = 0x02, +}; + +enum msp_data_size { + MSP_DATA_BITS_DEFAULT = -1, + MSP_DATA_BITS_8 = 0x00, + MSP_DATA_BITS_10, + MSP_DATA_BITS_12, + MSP_DATA_BITS_14, + MSP_DATA_BITS_16, + MSP_DATA_BITS_20, + MSP_DATA_BITS_24, + MSP_DATA_BITS_32, +}; + +enum msp_state { + MSP_STATE_IDLE = 0, + MSP_STATE_CONFIGURED = 1, + MSP_STATE_RUNNING = 2, +}; + +enum msp_rx_comparison_enable_mode { + MSP_COMPARISON_DISABLED = 0, + MSP_COMPARISON_NONEQUAL_ENABLED = 2, + MSP_COMPARISON_EQUAL_ENABLED = 3 +}; + +struct msp_multichannel_config { + bool rx_multichannel_enable; + bool tx_multichannel_enable; + enum msp_rx_comparison_enable_mode rx_comparison_enable_mode; + u8 padding; + u32 comparison_value; + u32 comparison_mask; + u32 rx_channel_0_enable; + u32 rx_channel_1_enable; + u32 rx_channel_2_enable; + u32 rx_channel_3_enable; + u32 tx_channel_0_enable; + u32 tx_channel_1_enable; + u32 tx_channel_2_enable; + u32 tx_channel_3_enable; +}; + +struct msp_protdesc { + u32 rx_phase_mode; + u32 tx_phase_mode; + u32 rx_phase2_start_mode; + u32 tx_phase2_start_mode; + u32 rx_byte_order; + u32 tx_byte_order; + u32 rx_frame_len_1; + u32 rx_frame_len_2; + u32 tx_frame_len_1; + u32 tx_frame_len_2; + u32 rx_elem_len_1; + u32 rx_elem_len_2; + u32 tx_elem_len_1; + u32 tx_elem_len_2; + u32 rx_data_delay; + u32 tx_data_delay; + u32 rx_clk_pol; + u32 tx_clk_pol; + u32 rx_fsync_pol; + u32 tx_fsync_pol; + u32 rx_half_word_swap; + u32 tx_half_word_swap; + u32 compression_mode; + u32 expansion_mode; + u32 frame_sync_ignore; + u32 frame_period; + u32 frame_width; + u32 clocks_per_frame; +}; + +struct ux500_msp_config { + unsigned int f_inputclk; + unsigned int rx_clk_sel; + unsigned int tx_clk_sel; + unsigned int srg_clk_sel; + unsigned int rx_fsync_pol; + unsigned int tx_fsync_pol; + unsigned int rx_fsync_sel; + unsigned int tx_fsync_sel; + unsigned int rx_fifo_config; + unsigned int tx_fifo_config; + unsigned int loopback_enable; + unsigned int tx_data_enable; + unsigned int default_protdesc; + struct msp_protdesc protdesc; + int multichannel_configured; + struct msp_multichannel_config multichannel_config; + unsigned int direction; + unsigned int protocol; + unsigned int frame_freq; + enum msp_data_size data_size; + unsigned int def_elem_len; + unsigned int iodelay; +}; + +struct ux500_msp_dma_params { + unsigned int data_size; + dma_addr_t tx_rx_addr; + struct stedma40_chan_cfg *dma_cfg; +}; + +struct ux500_msp { + int id; + void __iomem *registers; + struct device *dev; + struct ux500_msp_dma_params playback_dma_data; + struct ux500_msp_dma_params capture_dma_data; + enum msp_state msp_state; + int def_elem_len; + unsigned int dir_busy; + int loopback_enable; + unsigned int f_bitclk; +}; + +struct msp_i2s_platform_data; +int ux500_msp_i2s_init_msp(struct platform_device *pdev, + struct ux500_msp **msp_p, + struct msp_i2s_platform_data *platform_data); +void ux500_msp_i2s_cleanup_msp(struct platform_device *pdev, + struct ux500_msp *msp); +int ux500_msp_i2s_open(struct ux500_msp *msp, struct ux500_msp_config *config); +int ux500_msp_i2s_close(struct ux500_msp *msp, + unsigned int dir); +int ux500_msp_i2s_trigger(struct ux500_msp *msp, int cmd, + int direction); + +#endif -- cgit v1.2.3