From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- sound/usb/6fire/control.c | 617 ++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 617 insertions(+) create mode 100644 sound/usb/6fire/control.c (limited to 'sound/usb/6fire/control.c') diff --git a/sound/usb/6fire/control.c b/sound/usb/6fire/control.c new file mode 100644 index 000000000..9bd8dcbb6 --- /dev/null +++ b/sound/usb/6fire/control.c @@ -0,0 +1,617 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * Linux driver for TerraTec DMX 6Fire USB + * + * Mixer control + * + * Author: Torsten Schenk + * Created: Jan 01, 2011 + * Copyright: (C) Torsten Schenk + * + * Thanks to: + * - Holger Ruckdeschel: he found out how to control individual channel + * volumes and introduced mute switch + */ + +#include +#include +#include + +#include "control.h" +#include "comm.h" +#include "chip.h" + +static const char * const opt_coax_texts[2] = { "Optical", "Coax" }; +static const char * const line_phono_texts[2] = { "Line", "Phono" }; + +/* + * data that needs to be sent to device. sets up card internal stuff. + * values dumped from windows driver and filtered by trial'n'error. + */ +static const struct { + u8 type; + u8 reg; + u8 value; +} +init_data[] = { + { 0x22, 0x00, 0x00 }, { 0x20, 0x00, 0x08 }, { 0x22, 0x01, 0x01 }, + { 0x20, 0x01, 0x08 }, { 0x22, 0x02, 0x00 }, { 0x20, 0x02, 0x08 }, + { 0x22, 0x03, 0x00 }, { 0x20, 0x03, 0x08 }, { 0x22, 0x04, 0x00 }, + { 0x20, 0x04, 0x08 }, { 0x22, 0x05, 0x01 }, { 0x20, 0x05, 0x08 }, + { 0x22, 0x04, 0x01 }, { 0x12, 0x04, 0x00 }, { 0x12, 0x05, 0x00 }, + { 0x12, 0x0d, 0x38 }, { 0x12, 0x21, 0x82 }, { 0x12, 0x22, 0x80 }, + { 0x12, 0x23, 0x00 }, { 0x12, 0x06, 0x02 }, { 0x12, 0x03, 0x00 }, + { 0x12, 0x02, 0x00 }, { 0x22, 0x03, 0x01 }, + { 0 } /* TERMINATING ENTRY */ +}; + +static const int rates_altsetting[] = { 1, 1, 2, 2, 3, 3 }; +/* values to write to soundcard register for all samplerates */ +static const u16 rates_6fire_vl[] = {0x00, 0x01, 0x00, 0x01, 0x00, 0x01}; +static const u16 rates_6fire_vh[] = {0x11, 0x11, 0x10, 0x10, 0x00, 0x00}; + +static DECLARE_TLV_DB_MINMAX(tlv_output, -9000, 0); +static DECLARE_TLV_DB_MINMAX(tlv_input, -1500, 1500); + +enum { + DIGITAL_THRU_ONLY_SAMPLERATE = 3 +}; + +static void usb6fire_control_output_vol_update(struct control_runtime *rt) +{ + struct comm_runtime *comm_rt = rt->chip->comm; + int i; + + if (comm_rt) + for (i = 0; i < 6; i++) + if (!(rt->ovol_updated & (1 << i))) { + comm_rt->write8(comm_rt, 0x12, 0x0f + i, + 180 - rt->output_vol[i]); + rt->ovol_updated |= 1 << i; + } +} + +static void usb6fire_control_output_mute_update(struct control_runtime *rt) +{ + struct comm_runtime *comm_rt = rt->chip->comm; + + if (comm_rt) + comm_rt->write8(comm_rt, 0x12, 0x0e, ~rt->output_mute); +} + +static void usb6fire_control_input_vol_update(struct control_runtime *rt) +{ + struct comm_runtime *comm_rt = rt->chip->comm; + int i; + + if (comm_rt) + for (i = 0; i < 2; i++) + if (!(rt->ivol_updated & (1 << i))) { + comm_rt->write8(comm_rt, 0x12, 0x1c + i, + rt->input_vol[i] & 0x3f); + rt->ivol_updated |= 1 << i; + } +} + +static void usb6fire_control_line_phono_update(struct control_runtime *rt) +{ + struct comm_runtime *comm_rt = rt->chip->comm; + if (comm_rt) { + comm_rt->write8(comm_rt, 0x22, 0x02, rt->line_phono_switch); + comm_rt->write8(comm_rt, 0x21, 0x02, rt->line_phono_switch); + } +} + +static void usb6fire_control_opt_coax_update(struct control_runtime *rt) +{ + struct comm_runtime *comm_rt = rt->chip->comm; + if (comm_rt) { + comm_rt->write8(comm_rt, 0x22, 0x00, rt->opt_coax_switch); + comm_rt->write8(comm_rt, 0x21, 0x00, rt->opt_coax_switch); + } +} + +static int usb6fire_control_set_rate(struct control_runtime *rt, int rate) +{ + int ret; + struct usb_device *device = rt->chip->dev; + struct comm_runtime *comm_rt = rt->chip->comm; + + if (rate < 0 || rate >= CONTROL_N_RATES) + return -EINVAL; + + ret = usb_set_interface(device, 1, rates_altsetting[rate]); + if (ret < 0) + return ret; + + /* set soundcard clock */ + ret = comm_rt->write16(comm_rt, 0x02, 0x01, rates_6fire_vl[rate], + rates_6fire_vh[rate]); + if (ret < 0) + return ret; + + return 0; +} + +static int usb6fire_control_set_channels( + struct control_runtime *rt, int n_analog_out, + int n_analog_in, bool spdif_out, bool spdif_in) +{ + int ret; + struct comm_runtime *comm_rt = rt->chip->comm; + + /* enable analog inputs and outputs + * (one bit per stereo-channel) */ + ret = comm_rt->write16(comm_rt, 0x02, 0x02, + (1 << (n_analog_out / 2)) - 1, + (1 << (n_analog_in / 2)) - 1); + if (ret < 0) + return ret; + + /* disable digital inputs and outputs */ + /* TODO: use spdif_x to enable/disable digital channels */ + ret = comm_rt->write16(comm_rt, 0x02, 0x03, 0x00, 0x00); + if (ret < 0) + return ret; + + return 0; +} + +static int usb6fire_control_streaming_update(struct control_runtime *rt) +{ + struct comm_runtime *comm_rt = rt->chip->comm; + + if (comm_rt) { + if (!rt->usb_streaming && rt->digital_thru_switch) + usb6fire_control_set_rate(rt, + DIGITAL_THRU_ONLY_SAMPLERATE); + return comm_rt->write16(comm_rt, 0x02, 0x00, 0x00, + (rt->usb_streaming ? 0x01 : 0x00) | + (rt->digital_thru_switch ? 0x08 : 0x00)); + } + return -EINVAL; +} + +static int usb6fire_control_output_vol_info(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_info *uinfo) +{ + uinfo->type = SNDRV_CTL_ELEM_TYPE_INTEGER; + uinfo->count = 2; + uinfo->value.integer.min = 0; + uinfo->value.integer.max = 180; + return 0; +} + +static int usb6fire_control_output_vol_put(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + struct control_runtime *rt = snd_kcontrol_chip(kcontrol); + unsigned int ch = kcontrol->private_value; + int changed = 0; + + if (ch > 4) { + dev_err(&rt->chip->dev->dev, + "Invalid channel in volume control."); + return -EINVAL; + } + + if (rt->output_vol[ch] != ucontrol->value.integer.value[0]) { + rt->output_vol[ch] = ucontrol->value.integer.value[0]; + rt->ovol_updated &= ~(1 << ch); + changed = 1; + } + if (rt->output_vol[ch + 1] != ucontrol->value.integer.value[1]) { + rt->output_vol[ch + 1] = ucontrol->value.integer.value[1]; + rt->ovol_updated &= ~(2 << ch); + changed = 1; + } + + if (changed) + usb6fire_control_output_vol_update(rt); + + return changed; +} + +static int usb6fire_control_output_vol_get(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + struct control_runtime *rt = snd_kcontrol_chip(kcontrol); + unsigned int ch = kcontrol->private_value; + + if (ch > 4) { + dev_err(&rt->chip->dev->dev, + "Invalid channel in volume control."); + return -EINVAL; + } + + ucontrol->value.integer.value[0] = rt->output_vol[ch]; + ucontrol->value.integer.value[1] = rt->output_vol[ch + 1]; + return 0; +} + +static int usb6fire_control_output_mute_put(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + struct control_runtime *rt = snd_kcontrol_chip(kcontrol); + unsigned int ch = kcontrol->private_value; + u8 old = rt->output_mute; + u8 value = 0; + + if (ch > 4) { + dev_err(&rt->chip->dev->dev, + "Invalid channel in volume control."); + return -EINVAL; + } + + rt->output_mute &= ~(3 << ch); + if (ucontrol->value.integer.value[0]) + value |= 1; + if (ucontrol->value.integer.value[1]) + value |= 2; + rt->output_mute |= value << ch; + + if (rt->output_mute != old) + usb6fire_control_output_mute_update(rt); + + return rt->output_mute != old; +} + +static int usb6fire_control_output_mute_get(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + struct control_runtime *rt = snd_kcontrol_chip(kcontrol); + unsigned int ch = kcontrol->private_value; + u8 value = rt->output_mute >> ch; + + if (ch > 4) { + dev_err(&rt->chip->dev->dev, + "Invalid channel in volume control."); + return -EINVAL; + } + + ucontrol->value.integer.value[0] = 1 & value; + value >>= 1; + ucontrol->value.integer.value[1] = 1 & value; + + return 0; +} + +static int usb6fire_control_input_vol_info(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_info *uinfo) +{ + uinfo->type = SNDRV_CTL_ELEM_TYPE_INTEGER; + uinfo->count = 2; + uinfo->value.integer.min = 0; + uinfo->value.integer.max = 30; + return 0; +} + +static int usb6fire_control_input_vol_put(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + struct control_runtime *rt = snd_kcontrol_chip(kcontrol); + int changed = 0; + + if (rt->input_vol[0] != ucontrol->value.integer.value[0]) { + rt->input_vol[0] = ucontrol->value.integer.value[0] - 15; + rt->ivol_updated &= ~(1 << 0); + changed = 1; + } + if (rt->input_vol[1] != ucontrol->value.integer.value[1]) { + rt->input_vol[1] = ucontrol->value.integer.value[1] - 15; + rt->ivol_updated &= ~(1 << 1); + changed = 1; + } + + if (changed) + usb6fire_control_input_vol_update(rt); + + return changed; +} + +static int usb6fire_control_input_vol_get(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + struct control_runtime *rt = snd_kcontrol_chip(kcontrol); + + ucontrol->value.integer.value[0] = rt->input_vol[0] + 15; + ucontrol->value.integer.value[1] = rt->input_vol[1] + 15; + + return 0; +} + +static int usb6fire_control_line_phono_info(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_info *uinfo) +{ + return snd_ctl_enum_info(uinfo, 1, 2, line_phono_texts); +} + +static int usb6fire_control_line_phono_put(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + struct control_runtime *rt = snd_kcontrol_chip(kcontrol); + int changed = 0; + if (rt->line_phono_switch != ucontrol->value.integer.value[0]) { + rt->line_phono_switch = ucontrol->value.integer.value[0]; + usb6fire_control_line_phono_update(rt); + changed = 1; + } + return changed; +} + +static int usb6fire_control_line_phono_get(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + struct control_runtime *rt = snd_kcontrol_chip(kcontrol); + ucontrol->value.integer.value[0] = rt->line_phono_switch; + return 0; +} + +static int usb6fire_control_opt_coax_info(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_info *uinfo) +{ + return snd_ctl_enum_info(uinfo, 1, 2, opt_coax_texts); +} + +static int usb6fire_control_opt_coax_put(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + struct control_runtime *rt = snd_kcontrol_chip(kcontrol); + int changed = 0; + + if (rt->opt_coax_switch != ucontrol->value.enumerated.item[0]) { + rt->opt_coax_switch = ucontrol->value.enumerated.item[0]; + usb6fire_control_opt_coax_update(rt); + changed = 1; + } + return changed; +} + +static int usb6fire_control_opt_coax_get(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + struct control_runtime *rt = snd_kcontrol_chip(kcontrol); + ucontrol->value.enumerated.item[0] = rt->opt_coax_switch; + return 0; +} + +static int usb6fire_control_digital_thru_put(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + struct control_runtime *rt = snd_kcontrol_chip(kcontrol); + int changed = 0; + + if (rt->digital_thru_switch != ucontrol->value.integer.value[0]) { + rt->digital_thru_switch = ucontrol->value.integer.value[0]; + usb6fire_control_streaming_update(rt); + changed = 1; + } + return changed; +} + +static int usb6fire_control_digital_thru_get(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + struct control_runtime *rt = snd_kcontrol_chip(kcontrol); + ucontrol->value.integer.value[0] = rt->digital_thru_switch; + return 0; +} + +static const struct snd_kcontrol_new vol_elements[] = { + { + .iface = SNDRV_CTL_ELEM_IFACE_MIXER, + .name = "Analog Playback Volume", + .index = 0, + .private_value = 0, + .access = SNDRV_CTL_ELEM_ACCESS_READWRITE | + SNDRV_CTL_ELEM_ACCESS_TLV_READ, + .info = usb6fire_control_output_vol_info, + .get = usb6fire_control_output_vol_get, + .put = usb6fire_control_output_vol_put, + .tlv = { .p = tlv_output } + }, + { + .iface = SNDRV_CTL_ELEM_IFACE_MIXER, + .name = "Analog Playback Volume", + .index = 1, + .private_value = 2, + .access = SNDRV_CTL_ELEM_ACCESS_READWRITE | + SNDRV_CTL_ELEM_ACCESS_TLV_READ, + .info = usb6fire_control_output_vol_info, + .get = usb6fire_control_output_vol_get, + .put = usb6fire_control_output_vol_put, + .tlv = { .p = tlv_output } + }, + { + .iface = SNDRV_CTL_ELEM_IFACE_MIXER, + .name = "Analog Playback Volume", + .index = 2, + .private_value = 4, + .access = SNDRV_CTL_ELEM_ACCESS_READWRITE | + SNDRV_CTL_ELEM_ACCESS_TLV_READ, + .info = usb6fire_control_output_vol_info, + .get = usb6fire_control_output_vol_get, + .put = usb6fire_control_output_vol_put, + .tlv = { .p = tlv_output } + }, + {} +}; + +static const struct snd_kcontrol_new mute_elements[] = { + { + .iface = SNDRV_CTL_ELEM_IFACE_MIXER, + .name = "Analog Playback Switch", + .index = 0, + .private_value = 0, + .access = SNDRV_CTL_ELEM_ACCESS_READWRITE, + .info = snd_ctl_boolean_stereo_info, + .get = usb6fire_control_output_mute_get, + .put = usb6fire_control_output_mute_put, + }, + { + .iface = SNDRV_CTL_ELEM_IFACE_MIXER, + .name = "Analog Playback Switch", + .index = 1, + .private_value = 2, + .access = SNDRV_CTL_ELEM_ACCESS_READWRITE, + .info = snd_ctl_boolean_stereo_info, + .get = usb6fire_control_output_mute_get, + .put = usb6fire_control_output_mute_put, + }, + { + .iface = SNDRV_CTL_ELEM_IFACE_MIXER, + .name = "Analog Playback Switch", + .index = 2, + .private_value = 4, + .access = SNDRV_CTL_ELEM_ACCESS_READWRITE, + .info = snd_ctl_boolean_stereo_info, + .get = usb6fire_control_output_mute_get, + .put = usb6fire_control_output_mute_put, + }, + {} +}; + +static const struct snd_kcontrol_new elements[] = { + { + .iface = SNDRV_CTL_ELEM_IFACE_MIXER, + .name = "Line/Phono Capture Route", + .index = 0, + .access = SNDRV_CTL_ELEM_ACCESS_READWRITE, + .info = usb6fire_control_line_phono_info, + .get = usb6fire_control_line_phono_get, + .put = usb6fire_control_line_phono_put + }, + { + .iface = SNDRV_CTL_ELEM_IFACE_MIXER, + .name = "Opt/Coax Capture Route", + .index = 0, + .access = SNDRV_CTL_ELEM_ACCESS_READWRITE, + .info = usb6fire_control_opt_coax_info, + .get = usb6fire_control_opt_coax_get, + .put = usb6fire_control_opt_coax_put + }, + { + .iface = SNDRV_CTL_ELEM_IFACE_MIXER, + .name = "Digital Thru Playback Route", + .index = 0, + .access = SNDRV_CTL_ELEM_ACCESS_READWRITE, + .info = snd_ctl_boolean_mono_info, + .get = usb6fire_control_digital_thru_get, + .put = usb6fire_control_digital_thru_put + }, + { + .iface = SNDRV_CTL_ELEM_IFACE_MIXER, + .name = "Analog Capture Volume", + .index = 0, + .access = SNDRV_CTL_ELEM_ACCESS_READWRITE | + SNDRV_CTL_ELEM_ACCESS_TLV_READ, + .info = usb6fire_control_input_vol_info, + .get = usb6fire_control_input_vol_get, + .put = usb6fire_control_input_vol_put, + .tlv = { .p = tlv_input } + }, + {} +}; + +static int usb6fire_control_add_virtual( + struct control_runtime *rt, + struct snd_card *card, + char *name, + const struct snd_kcontrol_new *elems) +{ + int ret; + int i; + struct snd_kcontrol *vmaster = + snd_ctl_make_virtual_master(name, tlv_output); + struct snd_kcontrol *control; + + if (!vmaster) + return -ENOMEM; + ret = snd_ctl_add(card, vmaster); + if (ret < 0) + return ret; + + i = 0; + while (elems[i].name) { + control = snd_ctl_new1(&elems[i], rt); + if (!control) + return -ENOMEM; + ret = snd_ctl_add(card, control); + if (ret < 0) + return ret; + ret = snd_ctl_add_follower(vmaster, control); + if (ret < 0) + return ret; + i++; + } + return 0; +} + +int usb6fire_control_init(struct sfire_chip *chip) +{ + int i; + int ret; + struct control_runtime *rt = kzalloc(sizeof(struct control_runtime), + GFP_KERNEL); + struct comm_runtime *comm_rt = chip->comm; + + if (!rt) + return -ENOMEM; + + rt->chip = chip; + rt->update_streaming = usb6fire_control_streaming_update; + rt->set_rate = usb6fire_control_set_rate; + rt->set_channels = usb6fire_control_set_channels; + + i = 0; + while (init_data[i].type) { + comm_rt->write8(comm_rt, init_data[i].type, init_data[i].reg, + init_data[i].value); + i++; + } + + usb6fire_control_opt_coax_update(rt); + usb6fire_control_line_phono_update(rt); + usb6fire_control_output_vol_update(rt); + usb6fire_control_output_mute_update(rt); + usb6fire_control_input_vol_update(rt); + usb6fire_control_streaming_update(rt); + + ret = usb6fire_control_add_virtual(rt, chip->card, + "Master Playback Volume", vol_elements); + if (ret) { + dev_err(&chip->dev->dev, "cannot add control.\n"); + kfree(rt); + return ret; + } + ret = usb6fire_control_add_virtual(rt, chip->card, + "Master Playback Switch", mute_elements); + if (ret) { + dev_err(&chip->dev->dev, "cannot add control.\n"); + kfree(rt); + return ret; + } + + i = 0; + while (elements[i].name) { + ret = snd_ctl_add(chip->card, snd_ctl_new1(&elements[i], rt)); + if (ret < 0) { + kfree(rt); + dev_err(&chip->dev->dev, "cannot add control.\n"); + return ret; + } + i++; + } + + chip->control = rt; + return 0; +} + +void usb6fire_control_abort(struct sfire_chip *chip) +{} + +void usb6fire_control_destroy(struct sfire_chip *chip) +{ + kfree(chip->control); + chip->control = NULL; +} -- cgit v1.2.3