From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- sound/usb/line6/pod.c | 542 ++++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 542 insertions(+) create mode 100644 sound/usb/line6/pod.c (limited to 'sound/usb/line6/pod.c') diff --git a/sound/usb/line6/pod.c b/sound/usb/line6/pod.c new file mode 100644 index 000000000..d173971e5 --- /dev/null +++ b/sound/usb/line6/pod.c @@ -0,0 +1,542 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Line 6 Linux USB driver + * + * Copyright (C) 2004-2010 Markus Grabner (grabner@icg.tugraz.at) + */ + +#include +#include +#include +#include +#include + +#include +#include + +#include "capture.h" +#include "driver.h" +#include "playback.h" + +/* + Locate name in binary program dump +*/ +#define POD_NAME_OFFSET 0 +#define POD_NAME_LENGTH 16 + +/* + Other constants +*/ +#define POD_CONTROL_SIZE 0x80 +#define POD_BUFSIZE_DUMPREQ 7 +#define POD_STARTUP_DELAY 1000 + +/* + Stages of POD startup procedure +*/ +enum { + POD_STARTUP_VERSIONREQ, + POD_STARTUP_SETUP, + POD_STARTUP_DONE, +}; + +enum { + LINE6_BASSPODXT, + LINE6_BASSPODXTLIVE, + LINE6_BASSPODXTPRO, + LINE6_POCKETPOD, + LINE6_PODXT, + LINE6_PODXTLIVE_POD, + LINE6_PODXTPRO, +}; + +struct usb_line6_pod { + /* Generic Line 6 USB data */ + struct usb_line6 line6; + + /* Instrument monitor level */ + int monitor_level; + + /* Current progress in startup procedure */ + int startup_progress; + + /* Serial number of device */ + u32 serial_number; + + /* Firmware version (x 100) */ + int firmware_version; + + /* Device ID */ + int device_id; +}; + +#define line6_to_pod(x) container_of(x, struct usb_line6_pod, line6) + +#define POD_SYSEX_CODE 3 + +/* *INDENT-OFF* */ + +enum { + POD_SYSEX_SAVE = 0x24, + POD_SYSEX_SYSTEM = 0x56, + POD_SYSEX_SYSTEMREQ = 0x57, + /* POD_SYSEX_UPDATE = 0x6c, */ /* software update! */ + POD_SYSEX_STORE = 0x71, + POD_SYSEX_FINISH = 0x72, + POD_SYSEX_DUMPMEM = 0x73, + POD_SYSEX_DUMP = 0x74, + POD_SYSEX_DUMPREQ = 0x75 + + /* dumps entire internal memory of PODxt Pro */ + /* POD_SYSEX_DUMPMEM2 = 0x76 */ +}; + +enum { + POD_MONITOR_LEVEL = 0x04, + POD_SYSTEM_INVALID = 0x10000 +}; + +/* *INDENT-ON* */ + +enum { + POD_DUMP_MEMORY = 2 +}; + +enum { + POD_BUSY_READ, + POD_BUSY_WRITE, + POD_CHANNEL_DIRTY, + POD_SAVE_PRESSED, + POD_BUSY_MIDISEND +}; + +static const struct snd_ratden pod_ratden = { + .num_min = 78125, + .num_max = 78125, + .num_step = 1, + .den = 2 +}; + +static struct line6_pcm_properties pod_pcm_properties = { + .playback_hw = { + .info = (SNDRV_PCM_INFO_MMAP | + SNDRV_PCM_INFO_INTERLEAVED | + SNDRV_PCM_INFO_BLOCK_TRANSFER | + SNDRV_PCM_INFO_MMAP_VALID | + SNDRV_PCM_INFO_PAUSE | + SNDRV_PCM_INFO_SYNC_START), + .formats = SNDRV_PCM_FMTBIT_S24_3LE, + .rates = SNDRV_PCM_RATE_KNOT, + .rate_min = 39062, + .rate_max = 39063, + .channels_min = 2, + .channels_max = 2, + .buffer_bytes_max = 60000, + .period_bytes_min = 64, + .period_bytes_max = 8192, + .periods_min = 1, + .periods_max = 1024}, + .capture_hw = { + .info = (SNDRV_PCM_INFO_MMAP | + SNDRV_PCM_INFO_INTERLEAVED | + SNDRV_PCM_INFO_BLOCK_TRANSFER | + SNDRV_PCM_INFO_MMAP_VALID | + SNDRV_PCM_INFO_SYNC_START), + .formats = SNDRV_PCM_FMTBIT_S24_3LE, + .rates = SNDRV_PCM_RATE_KNOT, + .rate_min = 39062, + .rate_max = 39063, + .channels_min = 2, + .channels_max = 2, + .buffer_bytes_max = 60000, + .period_bytes_min = 64, + .period_bytes_max = 8192, + .periods_min = 1, + .periods_max = 1024}, + .rates = { + .nrats = 1, + .rats = &pod_ratden}, + .bytes_per_channel = 3 /* SNDRV_PCM_FMTBIT_S24_3LE */ +}; + + +static const char pod_version_header[] = { + 0xf0, 0x7e, 0x7f, 0x06, 0x02 +}; + +static char *pod_alloc_sysex_buffer(struct usb_line6_pod *pod, int code, + int size) +{ + return line6_alloc_sysex_buffer(&pod->line6, POD_SYSEX_CODE, code, + size); +} + +/* + Process a completely received message. +*/ +static void line6_pod_process_message(struct usb_line6 *line6) +{ + struct usb_line6_pod *pod = line6_to_pod(line6); + const unsigned char *buf = pod->line6.buffer_message; + + if (memcmp(buf, pod_version_header, sizeof(pod_version_header)) == 0) { + pod->firmware_version = buf[13] * 100 + buf[14] * 10 + buf[15]; + pod->device_id = ((int)buf[8] << 16) | ((int)buf[9] << 8) | + (int) buf[10]; + if (pod->startup_progress == POD_STARTUP_VERSIONREQ) { + pod->startup_progress = POD_STARTUP_SETUP; + schedule_delayed_work(&line6->startup_work, 0); + } + return; + } + + /* Only look for sysex messages from this device */ + if (buf[0] != (LINE6_SYSEX_BEGIN | LINE6_CHANNEL_DEVICE) && + buf[0] != (LINE6_SYSEX_BEGIN | LINE6_CHANNEL_UNKNOWN)) { + return; + } + if (memcmp(buf + 1, line6_midi_id, sizeof(line6_midi_id)) != 0) + return; + + if (buf[5] == POD_SYSEX_SYSTEM && buf[6] == POD_MONITOR_LEVEL) { + short value = ((int)buf[7] << 12) | ((int)buf[8] << 8) | + ((int)buf[9] << 4) | (int)buf[10]; + pod->monitor_level = value; + } +} + +/* + Send system parameter (from integer). +*/ +static int pod_set_system_param_int(struct usb_line6_pod *pod, int value, + int code) +{ + char *sysex; + static const int size = 5; + + sysex = pod_alloc_sysex_buffer(pod, POD_SYSEX_SYSTEM, size); + if (!sysex) + return -ENOMEM; + sysex[SYSEX_DATA_OFS] = code; + sysex[SYSEX_DATA_OFS + 1] = (value >> 12) & 0x0f; + sysex[SYSEX_DATA_OFS + 2] = (value >> 8) & 0x0f; + sysex[SYSEX_DATA_OFS + 3] = (value >> 4) & 0x0f; + sysex[SYSEX_DATA_OFS + 4] = (value) & 0x0f; + line6_send_sysex_message(&pod->line6, sysex, size); + kfree(sysex); + return 0; +} + +/* + "read" request on "serial_number" special file. +*/ +static ssize_t serial_number_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct snd_card *card = dev_to_snd_card(dev); + struct usb_line6_pod *pod = card->private_data; + + return sysfs_emit(buf, "%u\n", pod->serial_number); +} + +/* + "read" request on "firmware_version" special file. +*/ +static ssize_t firmware_version_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct snd_card *card = dev_to_snd_card(dev); + struct usb_line6_pod *pod = card->private_data; + + return sysfs_emit(buf, "%d.%02d\n", pod->firmware_version / 100, + pod->firmware_version % 100); +} + +/* + "read" request on "device_id" special file. +*/ +static ssize_t device_id_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct snd_card *card = dev_to_snd_card(dev); + struct usb_line6_pod *pod = card->private_data; + + return sysfs_emit(buf, "%d\n", pod->device_id); +} + +/* + POD startup procedure. + This is a sequence of functions with special requirements (e.g., must + not run immediately after initialization, must not run in interrupt + context). After the last one has finished, the device is ready to use. +*/ + +static void pod_startup(struct usb_line6 *line6) +{ + struct usb_line6_pod *pod = line6_to_pod(line6); + + switch (pod->startup_progress) { + case POD_STARTUP_VERSIONREQ: + /* request firmware version: */ + line6_version_request_async(line6); + break; + case POD_STARTUP_SETUP: + /* serial number: */ + line6_read_serial_number(&pod->line6, &pod->serial_number); + + /* ALSA audio interface: */ + if (snd_card_register(line6->card)) + dev_err(line6->ifcdev, "Failed to register POD card.\n"); + pod->startup_progress = POD_STARTUP_DONE; + break; + default: + break; + } +} + +/* POD special files: */ +static DEVICE_ATTR_RO(device_id); +static DEVICE_ATTR_RO(firmware_version); +static DEVICE_ATTR_RO(serial_number); + +static struct attribute *pod_dev_attrs[] = { + &dev_attr_device_id.attr, + &dev_attr_firmware_version.attr, + &dev_attr_serial_number.attr, + NULL +}; + +static const struct attribute_group pod_dev_attr_group = { + .name = "pod", + .attrs = pod_dev_attrs, +}; + +/* control info callback */ +static int snd_pod_control_monitor_info(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_info *uinfo) +{ + uinfo->type = SNDRV_CTL_ELEM_TYPE_INTEGER; + uinfo->count = 1; + uinfo->value.integer.min = 0; + uinfo->value.integer.max = 65535; + return 0; +} + +/* control get callback */ +static int snd_pod_control_monitor_get(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + struct snd_line6_pcm *line6pcm = snd_kcontrol_chip(kcontrol); + struct usb_line6_pod *pod = line6_to_pod(line6pcm->line6); + + ucontrol->value.integer.value[0] = pod->monitor_level; + return 0; +} + +/* control put callback */ +static int snd_pod_control_monitor_put(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + struct snd_line6_pcm *line6pcm = snd_kcontrol_chip(kcontrol); + struct usb_line6_pod *pod = line6_to_pod(line6pcm->line6); + + if (ucontrol->value.integer.value[0] == pod->monitor_level) + return 0; + + pod->monitor_level = ucontrol->value.integer.value[0]; + pod_set_system_param_int(pod, ucontrol->value.integer.value[0], + POD_MONITOR_LEVEL); + return 1; +} + +/* control definition */ +static const struct snd_kcontrol_new pod_control_monitor = { + .iface = SNDRV_CTL_ELEM_IFACE_MIXER, + .name = "Monitor Playback Volume", + .index = 0, + .access = SNDRV_CTL_ELEM_ACCESS_READWRITE, + .info = snd_pod_control_monitor_info, + .get = snd_pod_control_monitor_get, + .put = snd_pod_control_monitor_put +}; + +/* + Try to init POD device. +*/ +static int pod_init(struct usb_line6 *line6, + const struct usb_device_id *id) +{ + int err; + struct usb_line6_pod *pod = line6_to_pod(line6); + + line6->process_message = line6_pod_process_message; + line6->startup = pod_startup; + + /* create sysfs entries: */ + err = snd_card_add_dev_attr(line6->card, &pod_dev_attr_group); + if (err < 0) + return err; + + /* initialize PCM subsystem: */ + err = line6_init_pcm(line6, &pod_pcm_properties); + if (err < 0) + return err; + + /* register monitor control: */ + err = snd_ctl_add(line6->card, + snd_ctl_new1(&pod_control_monitor, line6->line6pcm)); + if (err < 0) + return err; + + /* + When the sound card is registered at this point, the PODxt Live + displays "Invalid Code Error 07", so we do it later in the event + handler. + */ + + if (pod->line6.properties->capabilities & LINE6_CAP_CONTROL) { + pod->monitor_level = POD_SYSTEM_INVALID; + + /* initiate startup procedure: */ + schedule_delayed_work(&line6->startup_work, + msecs_to_jiffies(POD_STARTUP_DELAY)); + } + + return 0; +} + +#define LINE6_DEVICE(prod) USB_DEVICE(0x0e41, prod) +#define LINE6_IF_NUM(prod, n) USB_DEVICE_INTERFACE_NUMBER(0x0e41, prod, n) + +/* table of devices that work with this driver */ +static const struct usb_device_id pod_id_table[] = { + { LINE6_DEVICE(0x4250), .driver_info = LINE6_BASSPODXT }, + { LINE6_DEVICE(0x4642), .driver_info = LINE6_BASSPODXTLIVE }, + { LINE6_DEVICE(0x4252), .driver_info = LINE6_BASSPODXTPRO }, + { LINE6_IF_NUM(0x5051, 1), .driver_info = LINE6_POCKETPOD }, + { LINE6_DEVICE(0x5044), .driver_info = LINE6_PODXT }, + { LINE6_IF_NUM(0x4650, 0), .driver_info = LINE6_PODXTLIVE_POD }, + { LINE6_DEVICE(0x5050), .driver_info = LINE6_PODXTPRO }, + {} +}; + +MODULE_DEVICE_TABLE(usb, pod_id_table); + +static const struct line6_properties pod_properties_table[] = { + [LINE6_BASSPODXT] = { + .id = "BassPODxt", + .name = "BassPODxt", + .capabilities = LINE6_CAP_CONTROL + | LINE6_CAP_CONTROL_MIDI + | LINE6_CAP_PCM + | LINE6_CAP_HWMON, + .altsetting = 5, + .ep_ctrl_r = 0x84, + .ep_ctrl_w = 0x03, + .ep_audio_r = 0x82, + .ep_audio_w = 0x01, + }, + [LINE6_BASSPODXTLIVE] = { + .id = "BassPODxtLive", + .name = "BassPODxt Live", + .capabilities = LINE6_CAP_CONTROL + | LINE6_CAP_CONTROL_MIDI + | LINE6_CAP_PCM + | LINE6_CAP_HWMON, + .altsetting = 1, + .ep_ctrl_r = 0x84, + .ep_ctrl_w = 0x03, + .ep_audio_r = 0x82, + .ep_audio_w = 0x01, + }, + [LINE6_BASSPODXTPRO] = { + .id = "BassPODxtPro", + .name = "BassPODxt Pro", + .capabilities = LINE6_CAP_CONTROL + | LINE6_CAP_CONTROL_MIDI + | LINE6_CAP_PCM + | LINE6_CAP_HWMON, + .altsetting = 5, + .ep_ctrl_r = 0x84, + .ep_ctrl_w = 0x03, + .ep_audio_r = 0x82, + .ep_audio_w = 0x01, + }, + [LINE6_POCKETPOD] = { + .id = "PocketPOD", + .name = "Pocket POD", + .capabilities = LINE6_CAP_CONTROL + | LINE6_CAP_CONTROL_MIDI, + .altsetting = 0, + .ep_ctrl_r = 0x82, + .ep_ctrl_w = 0x02, + /* no audio channel */ + }, + [LINE6_PODXT] = { + .id = "PODxt", + .name = "PODxt", + .capabilities = LINE6_CAP_CONTROL + | LINE6_CAP_CONTROL_MIDI + | LINE6_CAP_PCM + | LINE6_CAP_HWMON, + .altsetting = 5, + .ep_ctrl_r = 0x84, + .ep_ctrl_w = 0x03, + .ep_audio_r = 0x82, + .ep_audio_w = 0x01, + }, + [LINE6_PODXTLIVE_POD] = { + .id = "PODxtLive", + .name = "PODxt Live", + .capabilities = LINE6_CAP_CONTROL + | LINE6_CAP_CONTROL_MIDI + | LINE6_CAP_PCM + | LINE6_CAP_HWMON, + .altsetting = 1, + .ep_ctrl_r = 0x84, + .ep_ctrl_w = 0x03, + .ep_audio_r = 0x82, + .ep_audio_w = 0x01, + }, + [LINE6_PODXTPRO] = { + .id = "PODxtPro", + .name = "PODxt Pro", + .capabilities = LINE6_CAP_CONTROL + | LINE6_CAP_CONTROL_MIDI + | LINE6_CAP_PCM + | LINE6_CAP_HWMON, + .altsetting = 5, + .ep_ctrl_r = 0x84, + .ep_ctrl_w = 0x03, + .ep_audio_r = 0x82, + .ep_audio_w = 0x01, + }, +}; + +/* + Probe USB device. +*/ +static int pod_probe(struct usb_interface *interface, + const struct usb_device_id *id) +{ + return line6_probe(interface, id, "Line6-POD", + &pod_properties_table[id->driver_info], + pod_init, sizeof(struct usb_line6_pod)); +} + +static struct usb_driver pod_driver = { + .name = KBUILD_MODNAME, + .probe = pod_probe, + .disconnect = line6_disconnect, +#ifdef CONFIG_PM + .suspend = line6_suspend, + .resume = line6_resume, + .reset_resume = line6_resume, +#endif + .id_table = pod_id_table, +}; + +module_usb_driver(pod_driver); + +MODULE_DESCRIPTION("Line 6 POD USB driver"); +MODULE_LICENSE("GPL"); -- cgit v1.2.3