From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- sound/usb/mixer_us16x08.h | 122 ++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 122 insertions(+) create mode 100644 sound/usb/mixer_us16x08.h (limited to 'sound/usb/mixer_us16x08.h') diff --git a/sound/usb/mixer_us16x08.h b/sound/usb/mixer_us16x08.h new file mode 100644 index 000000000..7b8583dd3 --- /dev/null +++ b/sound/usb/mixer_us16x08.h @@ -0,0 +1,122 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +#ifndef __USB_MIXER_US16X08_H +#define __USB_MIXER_US16X08_H + +#define SND_US16X08_MAX_CHANNELS 16 + +/* define some bias, cause some alsa-mixers wont work with + * negative ranges or if mixer-min != 0 + */ +#define SND_US16X08_NO_BIAS 0 +#define SND_US16X08_FADER_BIAS 127 +#define SND_US16X08_EQ_HIGHFREQ_BIAS 0x20 +#define SND_US16X08_COMP_THRESHOLD_BIAS 0x20 +#define SND_US16X08_COMP_ATTACK_BIAS 2 +#define SND_US16X08_COMP_RELEASE_BIAS 1 + +/* get macro for components of kcontrol private_value */ +#define SND_US16X08_KCBIAS(x) (((x)->private_value >> 24) & 0xff) +#define SND_US16X08_KCSTEP(x) (((x)->private_value >> 16) & 0xff) +#define SND_US16X08_KCMIN(x) (((x)->private_value >> 8) & 0xff) +#define SND_US16X08_KCMAX(x) (((x)->private_value >> 0) & 0xff) +/* set macro for kcontrol private_value */ +#define SND_US16X08_KCSET(bias, step, min, max) \ + (((bias) << 24) | ((step) << 16) | ((min) << 8) | (max)) + +/* the URB request/type to control Tascam mixers */ +#define SND_US16X08_URB_REQUEST 0x1D +#define SND_US16X08_URB_REQUESTTYPE 0x40 + +/* the URB params to retrieve meter ranges */ +#define SND_US16X08_URB_METER_REQUEST 0x1e +#define SND_US16X08_URB_METER_REQUESTTYPE 0xc0 + +#define MUA0(x, y) ((x)[(y) * 10 + 4]) +#define MUA1(x, y) ((x)[(y) * 10 + 5]) +#define MUA2(x, y) ((x)[(y) * 10 + 6]) +#define MUB0(x, y) ((x)[(y) * 10 + 7]) +#define MUB1(x, y) ((x)[(y) * 10 + 8]) +#define MUB2(x, y) ((x)[(y) * 10 + 9]) +#define MUC0(x, y) ((x)[(y) * 10 + 10]) +#define MUC1(x, y) ((x)[(y) * 10 + 11]) +#define MUC2(x, y) ((x)[(y) * 10 + 12]) +#define MUC3(x, y) ((x)[(y) * 10 + 13]) + +/* Common Channel control IDs */ +#define SND_US16X08_ID_BYPASS 0x45 +#define SND_US16X08_ID_BUSS_OUT 0x44 +#define SND_US16X08_ID_PHASE 0x85 +#define SND_US16X08_ID_MUTE 0x83 +#define SND_US16X08_ID_FADER 0x81 +#define SND_US16X08_ID_PAN 0x82 +#define SND_US16X08_ID_METER 0xB1 + +#define SND_US16X08_ID_EQ_BAND_COUNT 4 +#define SND_US16X08_ID_EQ_PARAM_COUNT 4 + +/* EQ level IDs */ +#define SND_US16X08_ID_EQLOWLEVEL 0x01 +#define SND_US16X08_ID_EQLOWMIDLEVEL 0x02 +#define SND_US16X08_ID_EQHIGHMIDLEVEL 0x03 +#define SND_US16X08_ID_EQHIGHLEVEL 0x04 + +/* EQ frequence IDs */ +#define SND_US16X08_ID_EQLOWFREQ 0x11 +#define SND_US16X08_ID_EQLOWMIDFREQ 0x12 +#define SND_US16X08_ID_EQHIGHMIDFREQ 0x13 +#define SND_US16X08_ID_EQHIGHFREQ 0x14 + +/* EQ width IDs */ +#define SND_US16X08_ID_EQLOWMIDWIDTH 0x22 +#define SND_US16X08_ID_EQHIGHMIDWIDTH 0x23 + +#define SND_US16X08_ID_EQENABLE 0x30 + +#define EQ_STORE_BAND_IDX(x) ((x) & 0xf) +#define EQ_STORE_PARAM_IDX(x) (((x) & 0xf0) >> 4) + +#define SND_US16X08_ID_ROUTE 0x00 + +/* Compressor Ids */ +#define SND_US16X08_ID_COMP_BASE 0x32 +#define SND_US16X08_ID_COMP_THRESHOLD SND_US16X08_ID_COMP_BASE +#define SND_US16X08_ID_COMP_RATIO (SND_US16X08_ID_COMP_BASE + 1) +#define SND_US16X08_ID_COMP_ATTACK (SND_US16X08_ID_COMP_BASE + 2) +#define SND_US16X08_ID_COMP_RELEASE (SND_US16X08_ID_COMP_BASE + 3) +#define SND_US16X08_ID_COMP_GAIN (SND_US16X08_ID_COMP_BASE + 4) +#define SND_US16X08_ID_COMP_SWITCH (SND_US16X08_ID_COMP_BASE + 5) +#define SND_US16X08_ID_COMP_COUNT 6 + +#define COMP_STORE_IDX(x) ((x) - SND_US16X08_ID_COMP_BASE) + +struct snd_us16x08_eq_store { + u8 val[SND_US16X08_ID_EQ_BAND_COUNT][SND_US16X08_ID_EQ_PARAM_COUNT] + [SND_US16X08_MAX_CHANNELS]; +}; + +struct snd_us16x08_comp_store { + u8 val[SND_US16X08_ID_COMP_COUNT][SND_US16X08_MAX_CHANNELS]; +}; + +struct snd_us16x08_meter_store { + int meter_level[SND_US16X08_MAX_CHANNELS]; + int master_level[2]; /* level of meter for master output */ + int comp_index; /* round trip channel selector */ + int comp_active_index; /* channel select from user space mixer */ + int comp_level[16]; /* compressor reduction level */ + struct snd_us16x08_comp_store *comp_store; +}; + +struct snd_us16x08_control_params { + const struct snd_kcontrol_new *kcontrol_new; + int control_id; + int type; + int num_channels; + const char *name; + int default_val; +}; + +#define snd_us16x08_switch_info snd_ctl_boolean_mono_info + +int snd_us16x08_controls_create(struct usb_mixer_interface *mixer); +#endif /* __USB_MIXER_US16X08_H */ -- cgit v1.2.3