From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- tools/arch/parisc/include/uapi/asm/errno.h | 127 +++++++++++++++++++++++++++++ 1 file changed, 127 insertions(+) create mode 100644 tools/arch/parisc/include/uapi/asm/errno.h (limited to 'tools/arch/parisc/include/uapi/asm/errno.h') diff --git a/tools/arch/parisc/include/uapi/asm/errno.h b/tools/arch/parisc/include/uapi/asm/errno.h new file mode 100644 index 000000000..87245c584 --- /dev/null +++ b/tools/arch/parisc/include/uapi/asm/errno.h @@ -0,0 +1,127 @@ +/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */ +#ifndef _PARISC_ERRNO_H +#define _PARISC_ERRNO_H + +#include + +#define ENOMSG 35 /* No message of desired type */ +#define EIDRM 36 /* Identifier removed */ +#define ECHRNG 37 /* Channel number out of range */ +#define EL2NSYNC 38 /* Level 2 not synchronized */ +#define EL3HLT 39 /* Level 3 halted */ +#define EL3RST 40 /* Level 3 reset */ +#define ELNRNG 41 /* Link number out of range */ +#define EUNATCH 42 /* Protocol driver not attached */ +#define ENOCSI 43 /* No CSI structure available */ +#define EL2HLT 44 /* Level 2 halted */ +#define EDEADLK 45 /* Resource deadlock would occur */ +#define EDEADLOCK EDEADLK +#define ENOLCK 46 /* No record locks available */ +#define EILSEQ 47 /* Illegal byte sequence */ + +#define ENONET 50 /* Machine is not on the network */ +#define ENODATA 51 /* No data available */ +#define ETIME 52 /* Timer expired */ +#define ENOSR 53 /* Out of streams resources */ +#define ENOSTR 54 /* Device not a stream */ +#define ENOPKG 55 /* Package not installed */ + +#define ENOLINK 57 /* Link has been severed */ +#define EADV 58 /* Advertise error */ +#define ESRMNT 59 /* Srmount error */ +#define ECOMM 60 /* Communication error on send */ +#define EPROTO 61 /* Protocol error */ + +#define EMULTIHOP 64 /* Multihop attempted */ + +#define EDOTDOT 66 /* RFS specific error */ +#define EBADMSG 67 /* Not a data message */ +#define EUSERS 68 /* Too many users */ +#define EDQUOT 69 /* Quota exceeded */ +#define ESTALE 70 /* Stale file handle */ +#define EREMOTE 71 /* Object is remote */ +#define EOVERFLOW 72 /* Value too large for defined data type */ + +/* these errnos are defined by Linux but not HPUX. */ + +#define EBADE 160 /* Invalid exchange */ +#define EBADR 161 /* Invalid request descriptor */ +#define EXFULL 162 /* Exchange full */ +#define ENOANO 163 /* No anode */ +#define EBADRQC 164 /* Invalid request code */ +#define EBADSLT 165 /* Invalid slot */ +#define EBFONT 166 /* Bad font file format */ +#define ENOTUNIQ 167 /* Name not unique on network */ +#define EBADFD 168 /* File descriptor in bad state */ +#define EREMCHG 169 /* Remote address changed */ +#define ELIBACC 170 /* Can not access a needed shared library */ +#define ELIBBAD 171 /* Accessing a corrupted shared library */ +#define ELIBSCN 172 /* .lib section in a.out corrupted */ +#define ELIBMAX 173 /* Attempting to link in too many shared libraries */ +#define ELIBEXEC 174 /* Cannot exec a shared library directly */ +#define ERESTART 175 /* Interrupted system call should be restarted */ +#define ESTRPIPE 176 /* Streams pipe error */ +#define EUCLEAN 177 /* Structure needs cleaning */ +#define ENOTNAM 178 /* Not a XENIX named type file */ +#define ENAVAIL 179 /* No XENIX semaphores available */ +#define EISNAM 180 /* Is a named type file */ +#define EREMOTEIO 181 /* Remote I/O error */ +#define ENOMEDIUM 182 /* No medium found */ +#define EMEDIUMTYPE 183 /* Wrong medium type */ +#define ENOKEY 184 /* Required key not available */ +#define EKEYEXPIRED 185 /* Key has expired */ +#define EKEYREVOKED 186 /* Key has been revoked */ +#define EKEYREJECTED 187 /* Key was rejected by service */ + +/* We now return you to your regularly scheduled HPUX. */ + +#define ENOSYM 215 /* symbol does not exist in executable */ +#define ENOTSOCK 216 /* Socket operation on non-socket */ +#define EDESTADDRREQ 217 /* Destination address required */ +#define EMSGSIZE 218 /* Message too long */ +#define EPROTOTYPE 219 /* Protocol wrong type for socket */ +#define ENOPROTOOPT 220 /* Protocol not available */ +#define EPROTONOSUPPORT 221 /* Protocol not supported */ +#define ESOCKTNOSUPPORT 222 /* Socket type not supported */ +#define EOPNOTSUPP 223 /* Operation not supported on transport endpoint */ +#define EPFNOSUPPORT 224 /* Protocol family not supported */ +#define EAFNOSUPPORT 225 /* Address family not supported by protocol */ +#define EADDRINUSE 226 /* Address already in use */ +#define EADDRNOTAVAIL 227 /* Cannot assign requested address */ +#define ENETDOWN 228 /* Network is down */ +#define ENETUNREACH 229 /* Network is unreachable */ +#define ENETRESET 230 /* Network dropped connection because of reset */ +#define ECONNABORTED 231 /* Software caused connection abort */ +#define ECONNRESET 232 /* Connection reset by peer */ +#define ENOBUFS 233 /* No buffer space available */ +#define EISCONN 234 /* Transport endpoint is already connected */ +#define ENOTCONN 235 /* Transport endpoint is not connected */ +#define ESHUTDOWN 236 /* Cannot send after transport endpoint shutdown */ +#define ETOOMANYREFS 237 /* Too many references: cannot splice */ +#define ETIMEDOUT 238 /* Connection timed out */ +#define ECONNREFUSED 239 /* Connection refused */ +#define EREFUSED ECONNREFUSED /* for HP's NFS apparently */ +#define EREMOTERELEASE 240 /* Remote peer released connection */ +#define EHOSTDOWN 241 /* Host is down */ +#define EHOSTUNREACH 242 /* No route to host */ + +#define EALREADY 244 /* Operation already in progress */ +#define EINPROGRESS 245 /* Operation now in progress */ +#define EWOULDBLOCK EAGAIN /* Operation would block (Not HPUX compliant) */ +#define ENOTEMPTY 247 /* Directory not empty */ +#define ENAMETOOLONG 248 /* File name too long */ +#define ELOOP 249 /* Too many symbolic links encountered */ +#define ENOSYS 251 /* Function not implemented */ + +#define ECANCELLED 253 /* aio request was canceled before complete (POSIX.4 / HPUX) */ +#define ECANCELED ECANCELLED /* SuSv3 and Solaris wants one 'L' */ + +/* for robust mutexes */ +#define EOWNERDEAD 254 /* Owner died */ +#define ENOTRECOVERABLE 255 /* State not recoverable */ + +#define ERFKILL 256 /* Operation not possible due to RF-kill */ + +#define EHWPOISON 257 /* Memory page has hardware error */ + +#endif -- cgit v1.2.3