From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- tools/bootconfig/scripts/bconf2ftrace.sh | 301 +++++++++++++++++++++++++++++++ 1 file changed, 301 insertions(+) create mode 100755 tools/bootconfig/scripts/bconf2ftrace.sh (limited to 'tools/bootconfig/scripts/bconf2ftrace.sh') diff --git a/tools/bootconfig/scripts/bconf2ftrace.sh b/tools/bootconfig/scripts/bconf2ftrace.sh new file mode 100755 index 000000000..850c20734 --- /dev/null +++ b/tools/bootconfig/scripts/bconf2ftrace.sh @@ -0,0 +1,301 @@ +#!/bin/sh +# SPDX-License-Identifier: GPL-2.0-only + +usage() { + echo "Ftrace boottime trace test tool" + echo "Usage: $0 [--apply|--init] [--debug] BOOTCONFIG-FILE" + echo " --apply: Test actual apply to tracefs (need sudo)" + echo " --init: Initialize ftrace before applying (imply --apply)" + exit 1 +} + +[ $# -eq 0 ] && usage + +BCONF= +DEBUG= +APPLY= +INIT= +while [ x"$1" != x ]; do + case "$1" in + "--debug") + DEBUG=$1;; + "--apply") + APPLY=$1;; + "--init") + APPLY=$1 + INIT=$1;; + *) + [ ! -f $1 ] && usage + BCONF=$1;; + esac + shift 1 +done + +if [ x"$APPLY" != x ]; then + if [ `id -u` -ne 0 ]; then + echo "This must be run by root user. Try sudo." 1>&2 + exec sudo $0 $DEBUG $APPLY $BCONF + fi +fi + +run_cmd() { # command + echo "$*" + if [ x"$APPLY" != x ]; then # apply command + eval $* + fi +} + +if [ x"$DEBUG" != x ]; then + set -x +fi + +TRACEFS=`grep -m 1 -w tracefs /proc/mounts | cut -f 2 -d " "` +if [ -z "$TRACEFS" ]; then + if ! grep -wq debugfs /proc/mounts; then + echo "Error: No tracefs/debugfs was mounted." 1>&2 + exit 1 + fi + TRACEFS=`grep -m 1 -w debugfs /proc/mounts | cut -f 2 -d " "`/tracing + if [ ! -d $TRACEFS ]; then + echo "Error: ftrace is not enabled on this kernel." 1>&2 + exit 1 + fi +fi + +if [ x"$INIT" != x ]; then + . `dirname $0`/ftrace.sh + (cd $TRACEFS; initialize_ftrace) +fi + +. `dirname $0`/xbc.sh + +######## main ######### +set -e + +xbc_init $BCONF + +set_value_of() { # key file + if xbc_has_key $1; then + val=`xbc_get_val $1 1` + run_cmd "echo '$val' >> $2" + fi +} + +set_array_of() { # key file + if xbc_has_key $1; then + xbc_get_val $1 | while read line; do + run_cmd "echo '$line' >> $2" + done + fi +} + +compose_synth() { # event_name branch + echo -n "$1 " + xbc_get_val $2 | while read field; do echo -n "$field; "; done +} + +print_hist_array() { # prefix key + __sep="=" + if xbc_has_key ${1}.${2}; then + echo -n ":$2" + xbc_get_val ${1}.${2} | while read field; do + echo -n "$__sep$field"; __sep="," + done + fi +} + +print_hist_action_array() { # prefix key + __sep="(" + echo -n ".$2" + xbc_get_val ${1}.${2} | while read field; do + echo -n "$__sep$field"; __sep="," + done + echo -n ")" +} + +print_hist_one_action() { # prefix handler param + echo -n ":${2}("`xbc_get_val ${1}.${3}`")" + if xbc_has_key "${1}.trace"; then + print_hist_action_array ${1} "trace" + elif xbc_has_key "${1}.save"; then + print_hist_action_array ${1} "save" + elif xbc_has_key "${1}.snapshot"; then + echo -n ".snapshot()" + fi +} + +print_hist_actions() { # prefix handler param + for __hdr in `xbc_subkeys ${1}.${2} 1 ".[0-9]"`; do + print_hist_one_action ${1}.${2}.$__hdr ${2} ${3} + done + if xbc_has_key ${1}.${2}.${3} ; then + print_hist_one_action ${1}.${2} ${2} ${3} + fi +} + +print_hist_var() { # prefix varname + echo -n ":${2}="`xbc_get_val ${1}.var.${2} | tr -d [:space:]` +} + +print_one_histogram() { # prefix + echo -n "hist" + print_hist_array $1 "keys" + print_hist_array $1 "values" + print_hist_array $1 "sort" + if xbc_has_key "${1}.size"; then + echo -n ":size="`xbc_get_val ${1}.size` + fi + if xbc_has_key "${1}.name"; then + echo -n ":name="`xbc_get_val ${1}.name` + fi + for __var in `xbc_subkeys "${1}.var" 1`; do + print_hist_var ${1} ${__var} + done + if xbc_has_key "${1}.pause"; then + echo -n ":pause" + elif xbc_has_key "${1}.continue"; then + echo -n ":continue" + elif xbc_has_key "${1}.clear"; then + echo -n ":clear" + fi + print_hist_actions ${1} "onmax" "var" + print_hist_actions ${1} "onchange" "var" + print_hist_actions ${1} "onmatch" "event" + + if xbc_has_key "${1}.filter"; then + echo -n " if "`xbc_get_val ${1}.filter` + fi +} + +setup_one_histogram() { # prefix trigger-file + run_cmd "echo '`print_one_histogram ${1}`' >> ${2}" +} + +setup_histograms() { # prefix trigger-file + for __hist in `xbc_subkeys ${1} 1 ".[0-9]"`; do + setup_one_histogram ${1}.$__hist ${2} + done + if xbc_has_key ${1}.keys; then + setup_one_histogram ${1} ${2} + fi +} + +setup_event() { # prefix group event [instance] + branch=$1.$2.$3 + if [ "$4" ]; then + eventdir="$TRACEFS/instances/$4/events/$2/$3" + else + eventdir="$TRACEFS/events/$2/$3" + fi + # group enable + if [ "$3" = "enable" ]; then + run_cmd "echo 1 > ${eventdir}" + return + fi + + case $2 in + kprobes) + xbc_get_val ${branch}.probes | while read line; do + run_cmd "echo 'p:kprobes/$3 $line' >> $TRACEFS/kprobe_events" + done + ;; + synthetic) + run_cmd "echo '`compose_synth $3 ${branch}.fields`' >> $TRACEFS/synthetic_events" + ;; + esac + + set_value_of ${branch}.filter ${eventdir}/filter + set_array_of ${branch}.actions ${eventdir}/trigger + + setup_histograms ${branch}.hist ${eventdir}/trigger + + if xbc_has_key ${branch}.enable; then + run_cmd "echo 1 > ${eventdir}/enable" + fi +} + +setup_events() { # prefix("ftrace" or "ftrace.instance.INSTANCE") [instance] + prefix="${1}.event" + if xbc_has_branch ${1}.event; then + for grpev in `xbc_subkeys ${1}.event 2`; do + setup_event $prefix ${grpev%.*} ${grpev#*.} $2 + done + fi + if xbc_has_branch ${1}.event.enable; then + if [ "$2" ]; then + run_cmd "echo 1 > $TRACEFS/instances/$2/events/enable" + else + run_cmd "echo 1 > $TRACEFS/events/enable" + fi + fi +} + +size2kb() { # size[KB|MB] + case $1 in + *KB) + echo ${1%KB};; + *MB) + expr ${1%MB} \* 1024;; + *) + expr $1 / 1024 ;; + esac +} + +setup_instance() { # [instance] + if [ "$1" ]; then + instance="ftrace.instance.${1}" + instancedir=$TRACEFS/instances/$1 + else + instance="ftrace" + instancedir=$TRACEFS + fi + + set_array_of ${instance}.options ${instancedir}/trace_options + set_value_of ${instance}.trace_clock ${instancedir}/trace_clock + set_value_of ${instance}.cpumask ${instancedir}/tracing_cpumask + set_value_of ${instance}.tracing_on ${instancedir}/tracing_on + set_value_of ${instance}.tracer ${instancedir}/current_tracer + set_array_of ${instance}.ftrace.filters \ + ${instancedir}/set_ftrace_filter + set_array_of ${instance}.ftrace.notrace \ + ${instancedir}/set_ftrace_notrace + + if xbc_has_key ${instance}.alloc_snapshot; then + run_cmd "echo 1 > ${instancedir}/snapshot" + fi + + if xbc_has_key ${instance}.buffer_size; then + size=`xbc_get_val ${instance}.buffer_size 1` + size=`eval size2kb $size` + run_cmd "echo $size >> ${instancedir}/buffer_size_kb" + fi + + setup_events ${instance} $1 + set_array_of ${instance}.events ${instancedir}/set_event +} + +# ftrace global configs (kernel.*) +if xbc_has_key "kernel.dump_on_oops"; then + dump_mode=`xbc_get_val "kernel.dump_on_oops" 1` + [ "$dump_mode" ] && dump_mode=`eval echo $dump_mode` || dump_mode=1 + run_cmd "echo \"$dump_mode\" > /proc/sys/kernel/ftrace_dump_on_oops" +fi + +set_value_of kernel.fgraph_max_depth $TRACEFS/max_graph_depth +set_array_of kernel.fgraph_filters $TRACEFS/set_graph_function +set_array_of kernel.fgraph_notraces $TRACEFS/set_graph_notrace + +# Per-instance/per-event configs +if ! xbc_has_branch "ftrace" ; then + exit 0 +fi + +setup_instance # root instance + +if xbc_has_branch "ftrace.instance"; then + for i in `xbc_subkeys "ftrace.instance" 1`; do + run_cmd "mkdir -p $TRACEFS/instances/$i" + setup_instance $i + done +fi + -- cgit v1.2.3