From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- tools/bootconfig/test-bootconfig.sh | 191 ++++++++++++++++++++++++++++++++++++ 1 file changed, 191 insertions(+) create mode 100755 tools/bootconfig/test-bootconfig.sh (limited to 'tools/bootconfig/test-bootconfig.sh') diff --git a/tools/bootconfig/test-bootconfig.sh b/tools/bootconfig/test-bootconfig.sh new file mode 100755 index 000000000..f68e2e9ee --- /dev/null +++ b/tools/bootconfig/test-bootconfig.sh @@ -0,0 +1,191 @@ +#!/bin/sh +# SPDX-License-Identifier: GPL-2.0-only + +echo "Boot config test script" + +if [ -d "$1" ]; then + TESTDIR=$1 +else + TESTDIR=. +fi +BOOTCONF=${TESTDIR}/bootconfig +ALIGN=4 + +INITRD=`mktemp ${TESTDIR}/initrd-XXXX` +TEMPCONF=`mktemp ${TESTDIR}/temp-XXXX.bconf` +OUTFILE=`mktemp ${TESTDIR}/tempout-XXXX` +NG=0 + +cleanup() { + rm -f $INITRD $TEMPCONF $OUTFILE + exit $NG +} + +trap cleanup EXIT TERM + +NO=1 + +xpass() { # pass test command + echo "test case $NO ($*)... " + if ! ($@ && echo "\t\t[OK]"); then + echo "\t\t[NG]"; NG=$((NG + 1)) + fi + NO=$((NO + 1)) +} + +xfail() { # fail test command + echo "test case $NO ($*)... " + if ! (! $@ && echo "\t\t[OK]"); then + echo "\t\t[NG]"; NG=$((NG + 1)) + fi + NO=$((NO + 1)) +} + +echo "Basic command test" +xpass $BOOTCONF $INITRD + +echo "Delete command should success without bootconfig" +xpass $BOOTCONF -d $INITRD + +dd if=/dev/zero of=$INITRD bs=4096 count=1 +echo "key = value;" > $TEMPCONF +bconf_size=$(stat -c %s $TEMPCONF) +initrd_size=$(stat -c %s $INITRD) + +echo "Apply command test" +xpass $BOOTCONF -a $TEMPCONF $INITRD +new_size=$(stat -c %s $INITRD) + +echo "Show command test" +xpass $BOOTCONF $INITRD + +echo "File size check" +total_size=$(expr $bconf_size + $initrd_size + 9 + 12 + $ALIGN - 1 ) +total_size=$(expr $total_size / $ALIGN) +total_size=$(expr $total_size \* $ALIGN) +xpass test $new_size -eq $total_size + +echo "Apply command repeat test" +xpass $BOOTCONF -a $TEMPCONF $INITRD + +echo "File size check" +xpass test $new_size -eq $(stat -c %s $INITRD) + +echo "Delete command check" +xpass $BOOTCONF -d $INITRD + +echo "File size check" +new_size=$(stat -c %s $INITRD) +xpass test $new_size -eq $initrd_size + +echo "No error messge while applying" +dd if=/dev/zero of=$INITRD bs=4096 count=1 +printf " \0\0\0 \0\0\0" >> $INITRD +$BOOTCONF -a $TEMPCONF $INITRD > $OUTFILE 2>&1 +xfail grep -i "failed" $OUTFILE +xfail grep -i "error" $OUTFILE + +echo "Max node number check" + +echo -n > $TEMPCONF +for i in `seq 1 1024` ; do + echo "node$i" >> $TEMPCONF +done +xpass $BOOTCONF -a $TEMPCONF $INITRD + +echo "badnode" >> $TEMPCONF +xfail $BOOTCONF -a $TEMPCONF $INITRD + +echo "Max filesize check" + +# Max size is 32767 (including terminal byte) +echo -n "data = \"" > $TEMPCONF +dd if=/dev/urandom bs=768 count=32 | base64 -w0 >> $TEMPCONF +echo "\"" >> $TEMPCONF +xfail $BOOTCONF -a $TEMPCONF $INITRD + +truncate -s 32764 $TEMPCONF +echo "\"" >> $TEMPCONF # add 2 bytes + terminal ('\"\n\0') +xpass $BOOTCONF -a $TEMPCONF $INITRD + +echo "Adding same-key values" +cat > $TEMPCONF << EOF +key = bar, baz +key += qux +EOF +echo > $INITRD + +xpass $BOOTCONF -a $TEMPCONF $INITRD +$BOOTCONF $INITRD > $OUTFILE +xpass grep -q "bar" $OUTFILE +xpass grep -q "baz" $OUTFILE +xpass grep -q "qux" $OUTFILE + +echo "Override same-key values" +cat > $TEMPCONF << EOF +key = bar, baz +key := qux +EOF +echo > $INITRD + +xpass $BOOTCONF -a $TEMPCONF $INITRD +$BOOTCONF $INITRD > $OUTFILE +xfail grep -q "bar" $OUTFILE +xfail grep -q "baz" $OUTFILE +xpass grep -q "qux" $OUTFILE + +echo "Double/single quotes test" +echo "key = '\"string\"';" > $TEMPCONF +$BOOTCONF -a $TEMPCONF $INITRD +$BOOTCONF $INITRD > $TEMPCONF +cat $TEMPCONF +xpass grep \'\"string\"\' $TEMPCONF + +echo "Repeat same-key tree" +cat > $TEMPCONF << EOF +foo +bar +foo { buz } +EOF +echo > $INITRD + +xpass $BOOTCONF -a $TEMPCONF $INITRD +$BOOTCONF $INITRD > $OUTFILE +xpass grep -q "bar" $OUTFILE + + +echo "Remove/keep tailing spaces" +cat > $TEMPCONF << EOF +foo = val # comment +bar = "val2 " # comment +EOF +echo > $INITRD + +xpass $BOOTCONF -a $TEMPCONF $INITRD +$BOOTCONF $INITRD > $OUTFILE +xfail grep -q val[[:space:]] $OUTFILE +xpass grep -q val2[[:space:]] $OUTFILE + +echo "=== expected failure cases ===" +for i in samples/bad-* ; do + xfail $BOOTCONF -a $i $INITRD +done + +echo "=== expected success cases ===" +for i in samples/good-* ; do + xpass $BOOTCONF -a $i $INITRD +done + + +echo +echo "=== Summary ===" +echo "# of Passed: $(expr $NO - $NG - 1)" +echo "# of Failed: $NG" + +echo +if [ $NG -eq 0 ]; then + echo "All tests passed" +else + echo "$NG tests failed" + exit 1 +fi -- cgit v1.2.3