From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- tools/bpf/bpftool/perf.c | 258 +++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 258 insertions(+) create mode 100644 tools/bpf/bpftool/perf.c (limited to 'tools/bpf/bpftool/perf.c') diff --git a/tools/bpf/bpftool/perf.c b/tools/bpf/bpftool/perf.c new file mode 100644 index 000000000..91743445e --- /dev/null +++ b/tools/bpf/bpftool/perf.c @@ -0,0 +1,258 @@ +// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +// Copyright (C) 2018 Facebook +// Author: Yonghong Song + +#ifndef _GNU_SOURCE +#define _GNU_SOURCE +#endif +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include + +#include "main.h" + +/* 0: undecided, 1: supported, 2: not supported */ +static int perf_query_supported; +static bool has_perf_query_support(void) +{ + __u64 probe_offset, probe_addr; + __u32 len, prog_id, fd_type; + char buf[256]; + int fd; + + if (perf_query_supported) + goto out; + + fd = open("/", O_RDONLY); + if (fd < 0) { + p_err("perf_query_support: cannot open directory \"/\" (%s)", + strerror(errno)); + goto out; + } + + /* the following query will fail as no bpf attachment, + * the expected errno is ENOTSUPP + */ + errno = 0; + len = sizeof(buf); + bpf_task_fd_query(getpid(), fd, 0, buf, &len, &prog_id, + &fd_type, &probe_offset, &probe_addr); + + if (errno == 524 /* ENOTSUPP */) { + perf_query_supported = 1; + goto close_fd; + } + + perf_query_supported = 2; + p_err("perf_query_support: %s", strerror(errno)); + fprintf(stderr, + "HINT: non root or kernel doesn't support TASK_FD_QUERY\n"); + +close_fd: + close(fd); +out: + return perf_query_supported == 1; +} + +static void print_perf_json(int pid, int fd, __u32 prog_id, __u32 fd_type, + char *buf, __u64 probe_offset, __u64 probe_addr) +{ + jsonw_start_object(json_wtr); + jsonw_int_field(json_wtr, "pid", pid); + jsonw_int_field(json_wtr, "fd", fd); + jsonw_uint_field(json_wtr, "prog_id", prog_id); + switch (fd_type) { + case BPF_FD_TYPE_RAW_TRACEPOINT: + jsonw_string_field(json_wtr, "fd_type", "raw_tracepoint"); + jsonw_string_field(json_wtr, "tracepoint", buf); + break; + case BPF_FD_TYPE_TRACEPOINT: + jsonw_string_field(json_wtr, "fd_type", "tracepoint"); + jsonw_string_field(json_wtr, "tracepoint", buf); + break; + case BPF_FD_TYPE_KPROBE: + jsonw_string_field(json_wtr, "fd_type", "kprobe"); + if (buf[0] != '\0') { + jsonw_string_field(json_wtr, "func", buf); + jsonw_lluint_field(json_wtr, "offset", probe_offset); + } else { + jsonw_lluint_field(json_wtr, "addr", probe_addr); + } + break; + case BPF_FD_TYPE_KRETPROBE: + jsonw_string_field(json_wtr, "fd_type", "kretprobe"); + if (buf[0] != '\0') { + jsonw_string_field(json_wtr, "func", buf); + jsonw_lluint_field(json_wtr, "offset", probe_offset); + } else { + jsonw_lluint_field(json_wtr, "addr", probe_addr); + } + break; + case BPF_FD_TYPE_UPROBE: + jsonw_string_field(json_wtr, "fd_type", "uprobe"); + jsonw_string_field(json_wtr, "filename", buf); + jsonw_lluint_field(json_wtr, "offset", probe_offset); + break; + case BPF_FD_TYPE_URETPROBE: + jsonw_string_field(json_wtr, "fd_type", "uretprobe"); + jsonw_string_field(json_wtr, "filename", buf); + jsonw_lluint_field(json_wtr, "offset", probe_offset); + break; + default: + break; + } + jsonw_end_object(json_wtr); +} + +static void print_perf_plain(int pid, int fd, __u32 prog_id, __u32 fd_type, + char *buf, __u64 probe_offset, __u64 probe_addr) +{ + printf("pid %d fd %d: prog_id %u ", pid, fd, prog_id); + switch (fd_type) { + case BPF_FD_TYPE_RAW_TRACEPOINT: + printf("raw_tracepoint %s\n", buf); + break; + case BPF_FD_TYPE_TRACEPOINT: + printf("tracepoint %s\n", buf); + break; + case BPF_FD_TYPE_KPROBE: + if (buf[0] != '\0') + printf("kprobe func %s offset %llu\n", buf, + probe_offset); + else + printf("kprobe addr %llu\n", probe_addr); + break; + case BPF_FD_TYPE_KRETPROBE: + if (buf[0] != '\0') + printf("kretprobe func %s offset %llu\n", buf, + probe_offset); + else + printf("kretprobe addr %llu\n", probe_addr); + break; + case BPF_FD_TYPE_UPROBE: + printf("uprobe filename %s offset %llu\n", buf, probe_offset); + break; + case BPF_FD_TYPE_URETPROBE: + printf("uretprobe filename %s offset %llu\n", buf, + probe_offset); + break; + default: + break; + } +} + +static int show_proc(void) +{ + struct dirent *proc_de, *pid_fd_de; + __u64 probe_offset, probe_addr; + __u32 len, prog_id, fd_type; + DIR *proc, *pid_fd; + int err, pid, fd; + const char *pch; + char buf[4096]; + + proc = opendir("/proc"); + if (!proc) + return -1; + + while ((proc_de = readdir(proc))) { + pid = 0; + pch = proc_de->d_name; + + /* pid should be all numbers */ + while (isdigit(*pch)) { + pid = pid * 10 + *pch - '0'; + pch++; + } + if (*pch != '\0') + continue; + + err = snprintf(buf, sizeof(buf), "/proc/%s/fd", proc_de->d_name); + if (err < 0 || err >= (int)sizeof(buf)) + continue; + + pid_fd = opendir(buf); + if (!pid_fd) + continue; + + while ((pid_fd_de = readdir(pid_fd))) { + fd = 0; + pch = pid_fd_de->d_name; + + /* fd should be all numbers */ + while (isdigit(*pch)) { + fd = fd * 10 + *pch - '0'; + pch++; + } + if (*pch != '\0') + continue; + + /* query (pid, fd) for potential perf events */ + len = sizeof(buf); + err = bpf_task_fd_query(pid, fd, 0, buf, &len, + &prog_id, &fd_type, + &probe_offset, &probe_addr); + if (err < 0) + continue; + + if (json_output) + print_perf_json(pid, fd, prog_id, fd_type, buf, + probe_offset, probe_addr); + else + print_perf_plain(pid, fd, prog_id, fd_type, buf, + probe_offset, probe_addr); + } + closedir(pid_fd); + } + closedir(proc); + return 0; +} + +static int do_show(int argc, char **argv) +{ + int err; + + if (!has_perf_query_support()) + return -1; + + if (json_output) + jsonw_start_array(json_wtr); + err = show_proc(); + if (json_output) + jsonw_end_array(json_wtr); + + return err; +} + +static int do_help(int argc, char **argv) +{ + fprintf(stderr, + "Usage: %1$s %2$s { show | list }\n" + " %1$s %2$s help }\n" + "\n" + " " HELP_SPEC_OPTIONS " }\n" + "", + bin_name, argv[-2]); + + return 0; +} + +static const struct cmd cmds[] = { + { "show", do_show }, + { "list", do_show }, + { "help", do_help }, + { 0 } +}; + +int do_perf(int argc, char **argv) +{ + return cmd_select(cmds, argc, argv, do_help); +} -- cgit v1.2.3