From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- tools/firewire/decode-fcp.c | 214 ++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 214 insertions(+) create mode 100644 tools/firewire/decode-fcp.c (limited to 'tools/firewire/decode-fcp.c') diff --git a/tools/firewire/decode-fcp.c b/tools/firewire/decode-fcp.c new file mode 100644 index 000000000..b67ebc884 --- /dev/null +++ b/tools/firewire/decode-fcp.c @@ -0,0 +1,214 @@ +// SPDX-License-Identifier: GPL-2.0 +#include +#include +#include + +#include "list.h" +#include "nosy-dump.h" + +#define CSR_FCP_COMMAND 0xfffff0000b00ull +#define CSR_FCP_RESPONSE 0xfffff0000d00ull + +static const char * const ctype_names[] = { + [0x0] = "control", [0x8] = "not implemented", + [0x1] = "status", [0x9] = "accepted", + [0x2] = "specific inquiry", [0xa] = "rejected", + [0x3] = "notify", [0xb] = "in transition", + [0x4] = "general inquiry", [0xc] = "stable", + [0x5] = "(reserved 0x05)", [0xd] = "changed", + [0x6] = "(reserved 0x06)", [0xe] = "(reserved 0x0e)", + [0x7] = "(reserved 0x07)", [0xf] = "interim", +}; + +static const char * const subunit_type_names[] = { + [0x00] = "monitor", [0x10] = "(reserved 0x10)", + [0x01] = "audio", [0x11] = "(reserved 0x11)", + [0x02] = "printer", [0x12] = "(reserved 0x12)", + [0x03] = "disc", [0x13] = "(reserved 0x13)", + [0x04] = "tape recorder/player",[0x14] = "(reserved 0x14)", + [0x05] = "tuner", [0x15] = "(reserved 0x15)", + [0x06] = "ca", [0x16] = "(reserved 0x16)", + [0x07] = "camera", [0x17] = "(reserved 0x17)", + [0x08] = "(reserved 0x08)", [0x18] = "(reserved 0x18)", + [0x09] = "panel", [0x19] = "(reserved 0x19)", + [0x0a] = "bulletin board", [0x1a] = "(reserved 0x1a)", + [0x0b] = "camera storage", [0x1b] = "(reserved 0x1b)", + [0x0c] = "(reserved 0x0c)", [0x1c] = "vendor unique", + [0x0d] = "(reserved 0x0d)", [0x1d] = "all subunit types", + [0x0e] = "(reserved 0x0e)", [0x1e] = "subunit_type extended to next byte", + [0x0f] = "(reserved 0x0f)", [0x1f] = "unit", +}; + +struct avc_enum { + int value; + const char *name; +}; + +struct avc_field { + const char *name; /* Short name for field. */ + int offset; /* Location of field, specified in bits; */ + /* negative means from end of packet. */ + int width; /* Width of field, 0 means use data_length. */ + struct avc_enum *names; +}; + +struct avc_opcode_info { + const char *name; + struct avc_field fields[8]; +}; + +struct avc_enum power_field_names[] = { + { 0x70, "on" }, + { 0x60, "off" }, + { } +}; + +static const struct avc_opcode_info opcode_info[256] = { + + /* TA Document 1999026 */ + /* AV/C Digital Interface Command Set General Specification 4.0 */ + [0xb2] = { "power", { + { "state", 0, 8, power_field_names } + } + }, + [0x30] = { "unit info", { + { "foo", 0, 8 }, + { "unit_type", 8, 5 }, + { "unit", 13, 3 }, + { "company id", 16, 24 }, + } + }, + [0x31] = { "subunit info" }, + [0x01] = { "reserve" }, + [0xb0] = { "version" }, + [0x00] = { "vendor dependent" }, + [0x02] = { "plug info" }, + [0x12] = { "channel usage" }, + [0x24] = { "connect" }, + [0x20] = { "connect av" }, + [0x22] = { "connections" }, + [0x11] = { "digital input" }, + [0x10] = { "digital output" }, + [0x25] = { "disconnect" }, + [0x21] = { "disconnect av" }, + [0x19] = { "input plug signal format" }, + [0x18] = { "output plug signal format" }, + [0x1f] = { "general bus setup" }, + + /* TA Document 1999025 */ + /* AV/C Descriptor Mechanism Specification Version 1.0 */ + [0x0c] = { "create descriptor" }, + [0x08] = { "open descriptor" }, + [0x09] = { "read descriptor" }, + [0x0a] = { "write descriptor" }, + [0x05] = { "open info block" }, + [0x06] = { "read info block" }, + [0x07] = { "write info block" }, + [0x0b] = { "search descriptor" }, + [0x0d] = { "object number select" }, + + /* TA Document 1999015 */ + /* AV/C Command Set for Rate Control of Isochronous Data Flow 1.0 */ + [0xb3] = { "rate", { + { "subfunction", 0, 8 }, + { "result", 8, 8 }, + { "plug_type", 16, 8 }, + { "plug_id", 16, 8 }, + } + }, + + /* TA Document 1999008 */ + /* AV/C Audio Subunit Specification 1.0 */ + [0xb8] = { "function block" }, + + /* TA Document 2001001 */ + /* AV/C Panel Subunit Specification 1.1 */ + [0x7d] = { "gui update" }, + [0x7e] = { "push gui data" }, + [0x7f] = { "user action" }, + [0x7c] = { "pass through" }, + + /* */ + [0x26] = { "asynchronous connection" }, +}; + +struct avc_frame { + uint32_t operand0:8; + uint32_t opcode:8; + uint32_t subunit_id:3; + uint32_t subunit_type:5; + uint32_t ctype:4; + uint32_t cts:4; +}; + +static void +decode_avc(struct link_transaction *t) +{ + struct avc_frame *frame = + (struct avc_frame *) t->request->packet.write_block.data; + const struct avc_opcode_info *info; + const char *name; + char buffer[32]; + int i; + + info = &opcode_info[frame->opcode]; + if (info->name == NULL) { + snprintf(buffer, sizeof(buffer), + "(unknown opcode 0x%02x)", frame->opcode); + name = buffer; + } else { + name = info->name; + } + + printf("av/c %s, subunit_type=%s, subunit_id=%d, opcode=%s", + ctype_names[frame->ctype], subunit_type_names[frame->subunit_type], + frame->subunit_id, name); + + for (i = 0; info->fields[i].name != NULL; i++) + printf(", %s", info->fields[i].name); + + printf("\n"); +} + +int +decode_fcp(struct link_transaction *t) +{ + struct avc_frame *frame = + (struct avc_frame *) t->request->packet.write_block.data; + unsigned long long offset = + ((unsigned long long) t->request->packet.common.offset_high << 32) | + t->request->packet.common.offset_low; + + if (t->request->packet.common.tcode != TCODE_WRITE_BLOCK_REQUEST) + return 0; + + if (offset == CSR_FCP_COMMAND || offset == CSR_FCP_RESPONSE) { + switch (frame->cts) { + case 0x00: + decode_avc(t); + break; + case 0x01: + printf("cal fcp frame (cts=0x01)\n"); + break; + case 0x02: + printf("ehs fcp frame (cts=0x02)\n"); + break; + case 0x03: + printf("havi fcp frame (cts=0x03)\n"); + break; + case 0x0e: + printf("vendor specific fcp frame (cts=0x0e)\n"); + break; + case 0x0f: + printf("extended cts\n"); + break; + default: + printf("reserved fcp frame (ctx=0x%02x)\n", frame->cts); + break; + } + return 1; + } + + return 0; +} + -- cgit v1.2.3