From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- tools/gpio/gpio-utils.c | 284 ++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 284 insertions(+) create mode 100644 tools/gpio/gpio-utils.c (limited to 'tools/gpio/gpio-utils.c') diff --git a/tools/gpio/gpio-utils.c b/tools/gpio/gpio-utils.c new file mode 100644 index 000000000..4096bcd51 --- /dev/null +++ b/tools/gpio/gpio-utils.c @@ -0,0 +1,284 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * GPIO tools - helpers library for the GPIO tools + * + * Copyright (C) 2015 Linus Walleij + * Copyright (C) 2016 Bamvor Jian Zhang + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include "gpio-utils.h" + +#define CONSUMER "gpio-utils" + +/** + * DOC: Operation of gpio + * + * Provide the api of gpiochip for chardev interface. There are two + * types of api. The first one provide as same function as each + * ioctl, including request and release for lines of gpio, read/write + * the value of gpio. If the user want to do lots of read and write of + * lines of gpio, user should use this type of api. + * + * The second one provide the easy to use api for user. Each of the + * following api will request gpio lines, do the operation and then + * release these lines. + */ + +/** + * gpiotools_request_line() - request gpio lines in a gpiochip + * @device_name: The name of gpiochip without prefix "/dev/", + * such as "gpiochip0" + * @lines: An array desired lines, specified by offset + * index for the associated GPIO device. + * @num_lines: The number of lines to request. + * @config: The new config for requested gpio. Reference + * "linux/gpio.h" for config details. + * @consumer: The name of consumer, such as "sysfs", + * "powerkey". This is useful for other users to + * know who is using. + * + * Request gpio lines through the ioctl provided by chardev. User + * could call gpiotools_set_values() and gpiotools_get_values() to + * read and write respectively through the returned fd. Call + * gpiotools_release_line() to release these lines after that. + * + * Return: On success return the fd; + * On failure return the errno. + */ +int gpiotools_request_line(const char *device_name, unsigned int *lines, + unsigned int num_lines, + struct gpio_v2_line_config *config, + const char *consumer) +{ + struct gpio_v2_line_request req; + char *chrdev_name; + int fd; + int i; + int ret; + + ret = asprintf(&chrdev_name, "/dev/%s", device_name); + if (ret < 0) + return -ENOMEM; + + fd = open(chrdev_name, 0); + if (fd == -1) { + ret = -errno; + fprintf(stderr, "Failed to open %s, %s\n", + chrdev_name, strerror(errno)); + goto exit_free_name; + } + + memset(&req, 0, sizeof(req)); + for (i = 0; i < num_lines; i++) + req.offsets[i] = lines[i]; + + req.config = *config; + strcpy(req.consumer, consumer); + req.num_lines = num_lines; + + ret = ioctl(fd, GPIO_V2_GET_LINE_IOCTL, &req); + if (ret == -1) { + ret = -errno; + fprintf(stderr, "Failed to issue %s (%d), %s\n", + "GPIO_GET_LINE_IOCTL", ret, strerror(errno)); + } + + if (close(fd) == -1) + perror("Failed to close GPIO character device file"); +exit_free_name: + free(chrdev_name); + return ret < 0 ? ret : req.fd; +} + +/** + * gpiotools_set_values() - Set the value of gpio(s) + * @fd: The fd returned by + * gpiotools_request_line(). + * @values: The array of values want to set. + * + * Return: On success return 0; + * On failure return the errno. + */ +int gpiotools_set_values(const int fd, struct gpio_v2_line_values *values) +{ + int ret; + + ret = ioctl(fd, GPIO_V2_LINE_SET_VALUES_IOCTL, values); + if (ret == -1) { + ret = -errno; + fprintf(stderr, "Failed to issue %s (%d), %s\n", + "GPIOHANDLE_SET_LINE_VALUES_IOCTL", ret, + strerror(errno)); + } + + return ret; +} + +/** + * gpiotools_get_values() - Get the value of gpio(s) + * @fd: The fd returned by + * gpiotools_request_line(). + * @values: The array of values get from hardware. + * + * Return: On success return 0; + * On failure return the errno. + */ +int gpiotools_get_values(const int fd, struct gpio_v2_line_values *values) +{ + int ret; + + ret = ioctl(fd, GPIO_V2_LINE_GET_VALUES_IOCTL, values); + if (ret == -1) { + ret = -errno; + fprintf(stderr, "Failed to issue %s (%d), %s\n", + "GPIOHANDLE_GET_LINE_VALUES_IOCTL", ret, + strerror(errno)); + } + + return ret; +} + +/** + * gpiotools_release_line() - Release the line(s) of gpiochip + * @fd: The fd returned by + * gpiotools_request_line(). + * + * Return: On success return 0; + * On failure return the errno. + */ +int gpiotools_release_line(const int fd) +{ + int ret; + + ret = close(fd); + if (ret == -1) { + perror("Failed to close GPIO LINE device file"); + ret = -errno; + } + + return ret; +} + +/** + * gpiotools_get() - Get value from specific line + * @device_name: The name of gpiochip without prefix "/dev/", + * such as "gpiochip0" + * @line: number of line, such as 2. + * + * Return: On success return 0; + * On failure return the errno. + */ +int gpiotools_get(const char *device_name, unsigned int line) +{ + int ret; + unsigned int value; + unsigned int lines[] = {line}; + + ret = gpiotools_gets(device_name, lines, 1, &value); + if (ret) + return ret; + return value; +} + + +/** + * gpiotools_gets() - Get values from specific lines. + * @device_name: The name of gpiochip without prefix "/dev/", + * such as "gpiochip0". + * @lines: An array desired lines, specified by offset + * index for the associated GPIO device. + * @num_lines: The number of lines to request. + * @values: The array of values get from gpiochip. + * + * Return: On success return 0; + * On failure return the errno. + */ +int gpiotools_gets(const char *device_name, unsigned int *lines, + unsigned int num_lines, unsigned int *values) +{ + int fd, i; + int ret; + int ret_close; + struct gpio_v2_line_config config; + struct gpio_v2_line_values lv; + + memset(&config, 0, sizeof(config)); + config.flags = GPIO_V2_LINE_FLAG_INPUT; + ret = gpiotools_request_line(device_name, lines, num_lines, + &config, CONSUMER); + if (ret < 0) + return ret; + + fd = ret; + for (i = 0; i < num_lines; i++) + gpiotools_set_bit(&lv.mask, i); + ret = gpiotools_get_values(fd, &lv); + if (!ret) + for (i = 0; i < num_lines; i++) + values[i] = gpiotools_test_bit(lv.bits, i); + ret_close = gpiotools_release_line(fd); + return ret < 0 ? ret : ret_close; +} + +/** + * gpiotools_set() - Set value to specific line + * @device_name: The name of gpiochip without prefix "/dev/", + * such as "gpiochip0" + * @line: number of line, such as 2. + * @value: The value of gpio, must be 0(low) or 1(high). + * + * Return: On success return 0; + * On failure return the errno. + */ +int gpiotools_set(const char *device_name, unsigned int line, + unsigned int value) +{ + unsigned int lines[] = {line}; + + return gpiotools_sets(device_name, lines, 1, &value); +} + +/** + * gpiotools_sets() - Set values to specific lines. + * @device_name: The name of gpiochip without prefix "/dev/", + * such as "gpiochip0". + * @lines: An array desired lines, specified by offset + * index for the associated GPIO device. + * @num_lines: The number of lines to request. + * @values: The array of values set to gpiochip, must be + * 0(low) or 1(high). + * + * Return: On success return 0; + * On failure return the errno. + */ +int gpiotools_sets(const char *device_name, unsigned int *lines, + unsigned int num_lines, unsigned int *values) +{ + int ret, i; + struct gpio_v2_line_config config; + + memset(&config, 0, sizeof(config)); + config.flags = GPIO_V2_LINE_FLAG_OUTPUT; + config.num_attrs = 1; + config.attrs[0].attr.id = GPIO_V2_LINE_ATTR_ID_OUTPUT_VALUES; + for (i = 0; i < num_lines; i++) { + gpiotools_set_bit(&config.attrs[0].mask, i); + gpiotools_assign_bit(&config.attrs[0].attr.values, + i, values[i]); + } + ret = gpiotools_request_line(device_name, lines, num_lines, + &config, CONSUMER); + if (ret < 0) + return ret; + + return gpiotools_release_line(ret); +} -- cgit v1.2.3