From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- tools/include/nolibc/arch-x86_64.h | 215 +++++++++++++++++++++++++++++++++++++ 1 file changed, 215 insertions(+) create mode 100644 tools/include/nolibc/arch-x86_64.h (limited to 'tools/include/nolibc/arch-x86_64.h') diff --git a/tools/include/nolibc/arch-x86_64.h b/tools/include/nolibc/arch-x86_64.h new file mode 100644 index 000000000..0e1e9eb85 --- /dev/null +++ b/tools/include/nolibc/arch-x86_64.h @@ -0,0 +1,215 @@ +/* SPDX-License-Identifier: LGPL-2.1 OR MIT */ +/* + * x86_64 specific definitions for NOLIBC + * Copyright (C) 2017-2022 Willy Tarreau + */ + +#ifndef _NOLIBC_ARCH_X86_64_H +#define _NOLIBC_ARCH_X86_64_H + +/* O_* macros for fcntl/open are architecture-specific */ +#define O_RDONLY 0 +#define O_WRONLY 1 +#define O_RDWR 2 +#define O_CREAT 0x40 +#define O_EXCL 0x80 +#define O_NOCTTY 0x100 +#define O_TRUNC 0x200 +#define O_APPEND 0x400 +#define O_NONBLOCK 0x800 +#define O_DIRECTORY 0x10000 + +/* The struct returned by the stat() syscall, equivalent to stat64(). The + * syscall returns 116 bytes and stops in the middle of __unused. + */ +struct sys_stat_struct { + unsigned long st_dev; + unsigned long st_ino; + unsigned long st_nlink; + unsigned int st_mode; + unsigned int st_uid; + + unsigned int st_gid; + unsigned int __pad0; + unsigned long st_rdev; + long st_size; + long st_blksize; + + long st_blocks; + unsigned long st_atime; + unsigned long st_atime_nsec; + unsigned long st_mtime; + + unsigned long st_mtime_nsec; + unsigned long st_ctime; + unsigned long st_ctime_nsec; + long __unused[3]; +}; + +/* Syscalls for x86_64 : + * - registers are 64-bit + * - syscall number is passed in rax + * - arguments are in rdi, rsi, rdx, r10, r8, r9 respectively + * - the system call is performed by calling the syscall instruction + * - syscall return comes in rax + * - rcx and r11 are clobbered, others are preserved. + * - the arguments are cast to long and assigned into the target registers + * which are then simply passed as registers to the asm code, so that we + * don't have to experience issues with register constraints. + * - the syscall number is always specified last in order to allow to force + * some registers before (gcc refuses a %-register at the last position). + * - see also x86-64 ABI section A.2 AMD64 Linux Kernel Conventions, A.2.1 + * Calling Conventions. + * + * Link x86-64 ABI: https://gitlab.com/x86-psABIs/x86-64-ABI/-/wikis/home + * + */ + +#define my_syscall0(num) \ +({ \ + long _ret; \ + register long _num __asm__ ("rax") = (num); \ + \ + __asm__ volatile ( \ + "syscall\n" \ + : "=a"(_ret) \ + : "0"(_num) \ + : "rcx", "r11", "memory", "cc" \ + ); \ + _ret; \ +}) + +#define my_syscall1(num, arg1) \ +({ \ + long _ret; \ + register long _num __asm__ ("rax") = (num); \ + register long _arg1 __asm__ ("rdi") = (long)(arg1); \ + \ + __asm__ volatile ( \ + "syscall\n" \ + : "=a"(_ret) \ + : "r"(_arg1), \ + "0"(_num) \ + : "rcx", "r11", "memory", "cc" \ + ); \ + _ret; \ +}) + +#define my_syscall2(num, arg1, arg2) \ +({ \ + long _ret; \ + register long _num __asm__ ("rax") = (num); \ + register long _arg1 __asm__ ("rdi") = (long)(arg1); \ + register long _arg2 __asm__ ("rsi") = (long)(arg2); \ + \ + __asm__ volatile ( \ + "syscall\n" \ + : "=a"(_ret) \ + : "r"(_arg1), "r"(_arg2), \ + "0"(_num) \ + : "rcx", "r11", "memory", "cc" \ + ); \ + _ret; \ +}) + +#define my_syscall3(num, arg1, arg2, arg3) \ +({ \ + long _ret; \ + register long _num __asm__ ("rax") = (num); \ + register long _arg1 __asm__ ("rdi") = (long)(arg1); \ + register long _arg2 __asm__ ("rsi") = (long)(arg2); \ + register long _arg3 __asm__ ("rdx") = (long)(arg3); \ + \ + __asm__ volatile ( \ + "syscall\n" \ + : "=a"(_ret) \ + : "r"(_arg1), "r"(_arg2), "r"(_arg3), \ + "0"(_num) \ + : "rcx", "r11", "memory", "cc" \ + ); \ + _ret; \ +}) + +#define my_syscall4(num, arg1, arg2, arg3, arg4) \ +({ \ + long _ret; \ + register long _num __asm__ ("rax") = (num); \ + register long _arg1 __asm__ ("rdi") = (long)(arg1); \ + register long _arg2 __asm__ ("rsi") = (long)(arg2); \ + register long _arg3 __asm__ ("rdx") = (long)(arg3); \ + register long _arg4 __asm__ ("r10") = (long)(arg4); \ + \ + __asm__ volatile ( \ + "syscall\n" \ + : "=a"(_ret) \ + : "r"(_arg1), "r"(_arg2), "r"(_arg3), "r"(_arg4), \ + "0"(_num) \ + : "rcx", "r11", "memory", "cc" \ + ); \ + _ret; \ +}) + +#define my_syscall5(num, arg1, arg2, arg3, arg4, arg5) \ +({ \ + long _ret; \ + register long _num __asm__ ("rax") = (num); \ + register long _arg1 __asm__ ("rdi") = (long)(arg1); \ + register long _arg2 __asm__ ("rsi") = (long)(arg2); \ + register long _arg3 __asm__ ("rdx") = (long)(arg3); \ + register long _arg4 __asm__ ("r10") = (long)(arg4); \ + register long _arg5 __asm__ ("r8") = (long)(arg5); \ + \ + __asm__ volatile ( \ + "syscall\n" \ + : "=a"(_ret) \ + : "r"(_arg1), "r"(_arg2), "r"(_arg3), "r"(_arg4), "r"(_arg5), \ + "0"(_num) \ + : "rcx", "r11", "memory", "cc" \ + ); \ + _ret; \ +}) + +#define my_syscall6(num, arg1, arg2, arg3, arg4, arg5, arg6) \ +({ \ + long _ret; \ + register long _num __asm__ ("rax") = (num); \ + register long _arg1 __asm__ ("rdi") = (long)(arg1); \ + register long _arg2 __asm__ ("rsi") = (long)(arg2); \ + register long _arg3 __asm__ ("rdx") = (long)(arg3); \ + register long _arg4 __asm__ ("r10") = (long)(arg4); \ + register long _arg5 __asm__ ("r8") = (long)(arg5); \ + register long _arg6 __asm__ ("r9") = (long)(arg6); \ + \ + __asm__ volatile ( \ + "syscall\n" \ + : "=a"(_ret) \ + : "r"(_arg1), "r"(_arg2), "r"(_arg3), "r"(_arg4), "r"(_arg5), \ + "r"(_arg6), "0"(_num) \ + : "rcx", "r11", "memory", "cc" \ + ); \ + _ret; \ +}) + +/* startup code */ +/* + * x86-64 System V ABI mandates: + * 1) %rsp must be 16-byte aligned right before the function call. + * 2) The deepest stack frame should be zero (the %rbp). + * + */ +__asm__ (".section .text\n" + ".weak _start\n" + "_start:\n" + "pop %rdi\n" // argc (first arg, %rdi) + "mov %rsp, %rsi\n" // argv[] (second arg, %rsi) + "lea 8(%rsi,%rdi,8),%rdx\n" // then a NULL then envp (third arg, %rdx) + "xor %ebp, %ebp\n" // zero the stack frame + "and $-16, %rsp\n" // x86 ABI : esp must be 16-byte aligned before call + "call main\n" // main() returns the status code, we'll exit with it. + "mov %eax, %edi\n" // retrieve exit code (32 bit) + "mov $60, %eax\n" // NR_exit == 60 + "syscall\n" // really exit + "hlt\n" // ensure it does not return + ""); + +#endif // _NOLIBC_ARCH_X86_64_H -- cgit v1.2.3