From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- tools/leds/.gitignore | 2 + tools/leds/Makefile | 13 +++ tools/leds/get_led_device_info.sh | 201 +++++++++++++++++++++++++++++++++++++ tools/leds/led_hw_brightness_mon.c | 85 ++++++++++++++++ tools/leds/uledmon.c | 64 ++++++++++++ 5 files changed, 365 insertions(+) create mode 100644 tools/leds/.gitignore create mode 100644 tools/leds/Makefile create mode 100755 tools/leds/get_led_device_info.sh create mode 100644 tools/leds/led_hw_brightness_mon.c create mode 100644 tools/leds/uledmon.c (limited to 'tools/leds') diff --git a/tools/leds/.gitignore b/tools/leds/.gitignore new file mode 100644 index 000000000..06bd3ee1b --- /dev/null +++ b/tools/leds/.gitignore @@ -0,0 +1,2 @@ +# SPDX-License-Identifier: GPL-2.0-only +uledmon diff --git a/tools/leds/Makefile b/tools/leds/Makefile new file mode 100644 index 000000000..7b6bed13d --- /dev/null +++ b/tools/leds/Makefile @@ -0,0 +1,13 @@ +# SPDX-License-Identifier: GPL-2.0 +# Makefile for LEDs tools + +CFLAGS = -Wall -Wextra -g -I../../include/uapi + +all: uledmon led_hw_brightness_mon +%: %.c + $(CC) $(CFLAGS) -o $@ $^ + +clean: + $(RM) uledmon led_hw_brightness_mon + +.PHONY: all clean diff --git a/tools/leds/get_led_device_info.sh b/tools/leds/get_led_device_info.sh new file mode 100755 index 000000000..ccfa442db --- /dev/null +++ b/tools/leds/get_led_device_info.sh @@ -0,0 +1,201 @@ +#!/bin/sh +# SPDX-License-Identifier: GPL-2.0 + +led_common_defs_path="include/dt-bindings/leds/common.h" + +num_args=$# +if [ $num_args -eq 1 ]; then + linux_top=$(dirname `realpath $0` | awk -F/ \ + '{ \ + i=1; \ + while (i <= NF - 2) { \ + printf $i"/"; \ + i++; \ + }; \ + }') + led_defs_path=$linux_top/$led_common_defs_path +elif [ $num_args -eq 2 ]; then + led_defs_path=`realpath $2` +else + echo "Usage: get_led_device_info.sh LED_CDEV_PATH [LED_COMMON_DEFS_PATH]" + exit 1 +fi + +if [ ! -f $led_defs_path ]; then + echo "$led_defs_path doesn't exist" + exit 1 +fi + +led_cdev_path=`echo $1 | sed s'/\/$//'` + +ls "$led_cdev_path/brightness" > /dev/null 2>&1 +if [ $? -ne 0 ]; then + echo "Device \"$led_cdev_path\" does not exist." + exit 1 +fi + +bus=`readlink $led_cdev_path/device/subsystem | sed s'/.*\///'` +usb_subdev=`readlink $led_cdev_path | grep usb | sed s'/\(.*usb[0-9]*\/[0-9]*-[0-9]*\)\/.*/\1/'` +ls "$led_cdev_path/device/of_node/compatible" > /dev/null 2>&1 +of_node_missing=$? + +if [ "$bus" = "input" ]; then + input_node=`readlink $led_cdev_path/device | sed s'/.*\///'` + if [ ! -z "$usb_subdev" ]; then + bus="usb" + fi +fi + +if [ "$bus" = "usb" ]; then + usb_interface=`readlink $led_cdev_path | sed s'/.*\(usb[0-9]*\)/\1/' | cut -d\/ -f3` + cd $led_cdev_path/../$usb_subdev + driver=`readlink $usb_interface/driver | sed s'/.*\///'` + if [ -d "$usb_interface/ieee80211" ]; then + wifi_phy=`ls -l $usb_interface/ieee80211 | grep phy | awk '{print $9}'` + fi + idVendor=`cat idVendor` + idProduct=`cat idProduct` + manufacturer=`cat manufacturer` + product=`cat product` +elif [ "$bus" = "input" ]; then + cd $led_cdev_path + product=`cat device/name` + driver=`cat device/device/driver/description` +elif [ $of_node_missing -eq 0 ]; then + cd $led_cdev_path + compatible=`cat device/of_node/compatible` + if [ "$compatible" = "gpio-leds" ]; then + driver="leds-gpio" + elif [ "$compatible" = "pwm-leds" ]; then + driver="leds-pwm" + else + manufacturer=`echo $compatible | awk -F, '{print $1}'` + product=`echo $compatible | awk -F, '{print $2}'` + fi +else + echo "Unknown device type." + exit 1 +fi + +printf "\n#####################################\n" +printf "# LED class device hardware details #\n" +printf "#####################################\n\n" + +printf "bus:\t\t\t$bus\n" + +if [ ! -z "$idVendor" ]; then + printf "idVendor:\t\t$idVendor\n" +fi + +if [ ! -z "$idProduct" ]; then + printf "idProduct:\t\t$idProduct\n" +fi + +if [ ! -z "$manufacturer" ]; then + printf "manufacturer:\t\t$manufacturer\n" +fi + +if [ ! -z "$product" ]; then + printf "product:\t\t$product\n" +fi + +if [ ! -z "$driver" ]; then + printf "driver:\t\t\t$driver\n" +fi + +if [ ! -z "$input_node" ]; then + printf "associated input node:\t$input_node\n" +fi + +printf "\n####################################\n" +printf "# LED class device name validation #\n" +printf "####################################\n\n" + +led_name=`echo $led_cdev_path | sed s'/.*\///'` + +num_sections=`echo $led_name | awk -F: '{print NF}'` + +if [ $num_sections -eq 1 ]; then + printf "\":\" delimiter not detected.\t[ FAILED ]\n" + exit 1 +elif [ $num_sections -eq 2 ]; then + color=`echo $led_name | cut -d: -f1` + function=`echo $led_name | cut -d: -f2` +elif [ $num_sections -eq 3 ]; then + devicename=`echo $led_name | cut -d: -f1` + color=`echo $led_name | cut -d: -f2` + function=`echo $led_name | cut -d: -f3` +else + printf "Detected %d sections in the LED class device name - should the script be updated?\n" $num_sections + exit 1 +fi + +S_DEV="devicename" +S_CLR="color " +S_FUN="function " +status_tab=20 + +print_msg_ok() +{ + local section_name="$1" + local section_val="$2" + local msg="$3" + printf "$section_name :\t%-${status_tab}.${status_tab}s %s %s\n" "$section_val" "[ OK ] " "$msg" +} + +print_msg_failed() +{ + local section_name="$1" + local section_val="$2" + local msg="$3" + printf "$section_name :\t%-${status_tab}.${status_tab}s %s %s\n" "$section_val" "[ FAILED ]" "$msg" +} + +if [ ! -z "$input_node" ]; then + expected_devname=$input_node +elif [ ! -z "$wifi_phy" ]; then + expected_devname=$wifi_phy +fi + +if [ ! -z "$devicename" ]; then + if [ ! -z "$expected_devname" ]; then + if [ "$devicename" = "$expected_devname" ]; then + print_msg_ok "$S_DEV" "$devicename" + else + print_msg_failed "$S_DEV" "$devicename" "Expected: $expected_devname" + fi + else + if [ "$devicename" = "$manufacturer" ]; then + print_msg_failed "$S_DEV" "$devicename" "Redundant: use of vendor name is discouraged" + elif [ "$devicename" = "$product" ]; then + print_msg_failed "$S_DEV" "$devicename" "Redundant: use of product name is discouraged" + else + print_msg_failed "$S_DEV" "$devicename" "Unknown devicename - should the script be updated?" + fi + fi +elif [ ! -z "$expected_devname" ]; then + print_msg_failed "$S_DEV" "blank" "Expected: $expected_devname" +fi + +if [ ! -z "$color" ]; then + color_upper=`echo $color | tr [:lower:] [:upper:]` + color_id_definition=$(cat $led_defs_path | grep "_$color_upper\s" | awk '{print $2}') + if [ ! -z "$color_id_definition" ]; then + print_msg_ok "$S_CLR" "$color" "Matching definition: $color_id_definition" + else + print_msg_failed "$S_CLR" "$color" "Definition not found in $led_defs_path" + fi + +fi + +if [ ! -z "$function" ]; then + # strip optional enumerator + function=`echo $function | sed s'/\(.*\)-[0-9]*$/\1/'` + fun_definition=$(cat $led_defs_path | grep "\"$function\"" | awk '{print $2}') + if [ ! -z "$fun_definition" ]; then + print_msg_ok "$S_FUN" "$function" "Matching definition: $fun_definition" + else + print_msg_failed "$S_FUN" "$function" "Definition not found in $led_defs_path" + fi + +fi diff --git a/tools/leds/led_hw_brightness_mon.c b/tools/leds/led_hw_brightness_mon.c new file mode 100644 index 000000000..eb65ae988 --- /dev/null +++ b/tools/leds/led_hw_brightness_mon.c @@ -0,0 +1,85 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * led_hw_brightness_mon.c + * + * This program monitors LED brightness level changes having its origin + * in hardware/firmware, i.e. outside of kernel control. + * A timestamp and brightness value is printed each time the brightness changes. + * + * Usage: led_hw_brightness_mon + * + * is the name of the LED class device to be monitored. Pressing + * CTRL+C will exit. + */ + +#include +#include +#include +#include +#include +#include +#include +#include + +#include + +int main(int argc, char const *argv[]) +{ + int fd, ret; + char brightness_file_path[LED_MAX_NAME_SIZE + 11]; + struct pollfd pollfd; + struct timespec ts; + char buf[11]; + + if (argc != 2) { + fprintf(stderr, "Requires argument\n"); + return 1; + } + + snprintf(brightness_file_path, LED_MAX_NAME_SIZE, + "/sys/class/leds/%s/brightness_hw_changed", argv[1]); + + fd = open(brightness_file_path, O_RDONLY); + if (fd == -1) { + printf("Failed to open %s file\n", brightness_file_path); + return 1; + } + + /* + * read may fail if no hw brightness change has occurred so far, + * but it is required to avoid spurious poll notifications in + * the opposite case. + */ + read(fd, buf, sizeof(buf)); + + pollfd.fd = fd; + pollfd.events = POLLPRI; + + while (1) { + ret = poll(&pollfd, 1, -1); + if (ret == -1) { + printf("Failed to poll %s file (%d)\n", + brightness_file_path, ret); + ret = 1; + break; + } + + clock_gettime(CLOCK_MONOTONIC, &ts); + + ret = read(fd, buf, sizeof(buf)); + if (ret < 0) + break; + + ret = lseek(pollfd.fd, 0, SEEK_SET); + if (ret < 0) { + printf("lseek failed (%d)\n", ret); + break; + } + + printf("[%ld.%09ld] %d\n", ts.tv_sec, ts.tv_nsec, atoi(buf)); + } + + close(fd); + + return ret; +} diff --git a/tools/leds/uledmon.c b/tools/leds/uledmon.c new file mode 100644 index 000000000..c15a39c1f --- /dev/null +++ b/tools/leds/uledmon.c @@ -0,0 +1,64 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * uledmon.c + * + * This program creates a new userspace LED class device and monitors it. A + * timestamp and brightness value is printed each time the brightness changes. + * + * Usage: uledmon + * + * is the name of the LED class device to be created. Pressing + * CTRL+C will exit. + */ + +#include +#include +#include +#include +#include + +#include + +int main(int argc, char const *argv[]) +{ + struct uleds_user_dev uleds_dev; + int fd, ret; + int brightness; + struct timespec ts; + + if (argc != 2) { + fprintf(stderr, "Requires argument\n"); + return 1; + } + + strncpy(uleds_dev.name, argv[1], LED_MAX_NAME_SIZE); + uleds_dev.max_brightness = 100; + + fd = open("/dev/uleds", O_RDWR); + if (fd == -1) { + perror("Failed to open /dev/uleds"); + return 1; + } + + ret = write(fd, &uleds_dev, sizeof(uleds_dev)); + if (ret == -1) { + perror("Failed to write to /dev/uleds"); + close(fd); + return 1; + } + + while (1) { + ret = read(fd, &brightness, sizeof(brightness)); + if (ret == -1) { + perror("Failed to read from /dev/uleds"); + close(fd); + return 1; + } + clock_gettime(CLOCK_MONOTONIC, &ts); + printf("[%ld.%09ld] %u\n", ts.tv_sec, ts.tv_nsec, brightness); + } + + close(fd); + + return 0; +} -- cgit v1.2.3