From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- tools/objtool/builtin-check.c | 233 ++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 233 insertions(+) create mode 100644 tools/objtool/builtin-check.c (limited to 'tools/objtool/builtin-check.c') diff --git a/tools/objtool/builtin-check.c b/tools/objtool/builtin-check.c new file mode 100644 index 000000000..a4f39407b --- /dev/null +++ b/tools/objtool/builtin-check.c @@ -0,0 +1,233 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * Copyright (C) 2015-2017 Josh Poimboeuf + */ + +#include +#include +#include +#include +#include + +#define ERROR(format, ...) \ + fprintf(stderr, \ + "error: objtool: " format "\n", \ + ##__VA_ARGS__) + +struct opts opts; + +static const char * const check_usage[] = { + "objtool [] file.o", + NULL, +}; + +static const char * const env_usage[] = { + "OBJTOOL_ARGS=\"\"", + NULL, +}; + +static int parse_dump(const struct option *opt, const char *str, int unset) +{ + if (!str || !strcmp(str, "orc")) { + opts.dump_orc = true; + return 0; + } + + return -1; +} + +static int parse_hacks(const struct option *opt, const char *str, int unset) +{ + bool found = false; + + /* + * Use strstr() as a lazy method of checking for comma-separated + * options. + * + * No string provided == enable all options. + */ + + if (!str || strstr(str, "jump_label")) { + opts.hack_jump_label = true; + found = true; + } + + if (!str || strstr(str, "noinstr")) { + opts.hack_noinstr = true; + found = true; + } + + if (!str || strstr(str, "skylake")) { + opts.hack_skylake = true; + found = true; + } + + return found ? 0 : -1; +} + +const struct option check_options[] = { + OPT_GROUP("Actions:"), + OPT_CALLBACK_OPTARG('h', "hacks", NULL, NULL, "jump_label,noinstr,skylake", "patch toolchain bugs/limitations", parse_hacks), + OPT_BOOLEAN('i', "ibt", &opts.ibt, "validate and annotate IBT"), + OPT_BOOLEAN('m', "mcount", &opts.mcount, "annotate mcount/fentry calls for ftrace"), + OPT_BOOLEAN('n', "noinstr", &opts.noinstr, "validate noinstr rules"), + OPT_BOOLEAN('o', "orc", &opts.orc, "generate ORC metadata"), + OPT_BOOLEAN('r', "retpoline", &opts.retpoline, "validate and annotate retpoline usage"), + OPT_BOOLEAN(0, "rethunk", &opts.rethunk, "validate and annotate rethunk usage"), + OPT_BOOLEAN(0, "unret", &opts.unret, "validate entry unret placement"), + OPT_INTEGER(0, "prefix", &opts.prefix, "generate prefix symbols"), + OPT_BOOLEAN('l', "sls", &opts.sls, "validate straight-line-speculation mitigations"), + OPT_BOOLEAN('s', "stackval", &opts.stackval, "validate frame pointer rules"), + OPT_BOOLEAN('t', "static-call", &opts.static_call, "annotate static calls"), + OPT_BOOLEAN('u', "uaccess", &opts.uaccess, "validate uaccess rules for SMAP"), + OPT_BOOLEAN(0 , "cfi", &opts.cfi, "annotate kernel control flow integrity (kCFI) function preambles"), + OPT_CALLBACK_OPTARG(0, "dump", NULL, NULL, "orc", "dump metadata", parse_dump), + + OPT_GROUP("Options:"), + OPT_BOOLEAN(0, "backtrace", &opts.backtrace, "unwind on error"), + OPT_BOOLEAN(0, "backup", &opts.backup, "create .orig files before modification"), + OPT_BOOLEAN(0, "dry-run", &opts.dryrun, "don't write modifications"), + OPT_BOOLEAN(0, "link", &opts.link, "object is a linked object"), + OPT_BOOLEAN(0, "module", &opts.module, "object is part of a kernel module"), + OPT_BOOLEAN(0, "mnop", &opts.mnop, "nop out mcount call sites"), + OPT_BOOLEAN(0, "no-unreachable", &opts.no_unreachable, "skip 'unreachable instruction' warnings"), + OPT_BOOLEAN(0, "sec-address", &opts.sec_address, "print section addresses in warnings"), + OPT_BOOLEAN(0, "stats", &opts.stats, "print statistics"), + + OPT_END(), +}; + +int cmd_parse_options(int argc, const char **argv, const char * const usage[]) +{ + const char *envv[16] = { }; + char *env; + int envc; + + env = getenv("OBJTOOL_ARGS"); + if (env) { + envv[0] = "OBJTOOL_ARGS"; + for (envc = 1; envc < ARRAY_SIZE(envv); ) { + envv[envc++] = env; + env = strchr(env, ' '); + if (!env) + break; + *env = '\0'; + env++; + } + + parse_options(envc, envv, check_options, env_usage, 0); + } + + argc = parse_options(argc, argv, check_options, usage, 0); + if (argc != 1) + usage_with_options(usage, check_options); + return argc; +} + +static bool opts_valid(void) +{ + if (opts.hack_jump_label || + opts.hack_noinstr || + opts.ibt || + opts.mcount || + opts.noinstr || + opts.orc || + opts.retpoline || + opts.rethunk || + opts.sls || + opts.stackval || + opts.static_call || + opts.uaccess) { + if (opts.dump_orc) { + ERROR("--dump can't be combined with other options"); + return false; + } + + return true; + } + + if (opts.unret && !opts.rethunk) { + ERROR("--unret requires --rethunk"); + return false; + } + + if (opts.dump_orc) + return true; + + ERROR("At least one command required"); + return false; +} + +static bool mnop_opts_valid(void) +{ + if (opts.mnop && !opts.mcount) { + ERROR("--mnop requires --mcount"); + return false; + } + + return true; +} + +static bool link_opts_valid(struct objtool_file *file) +{ + if (opts.link) + return true; + + if (has_multiple_files(file->elf)) { + ERROR("Linked object detected, forcing --link"); + opts.link = true; + return true; + } + + if (opts.noinstr) { + ERROR("--noinstr requires --link"); + return false; + } + + if (opts.ibt) { + ERROR("--ibt requires --link"); + return false; + } + + if (opts.unret) { + ERROR("--unret requires --link"); + return false; + } + + return true; +} + +int objtool_run(int argc, const char **argv) +{ + const char *objname; + struct objtool_file *file; + int ret; + + argc = cmd_parse_options(argc, argv, check_usage); + objname = argv[0]; + + if (!opts_valid()) + return 1; + + if (opts.dump_orc) + return orc_dump(objname); + + file = objtool_open_read(objname); + if (!file) + return 1; + + if (!mnop_opts_valid()) + return 1; + + if (!link_opts_valid(file)) + return 1; + + ret = check(file); + if (ret) + return ret; + + if (file->elf->changed) + return elf_write(file->elf); + + return 0; +} -- cgit v1.2.3