From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- tools/perf/Documentation/perf-diff.txt | 305 +++++++++++++++++++++++++++++++++ 1 file changed, 305 insertions(+) create mode 100644 tools/perf/Documentation/perf-diff.txt (limited to 'tools/perf/Documentation/perf-diff.txt') diff --git a/tools/perf/Documentation/perf-diff.txt b/tools/perf/Documentation/perf-diff.txt new file mode 100644 index 000000000..f3067a4af --- /dev/null +++ b/tools/perf/Documentation/perf-diff.txt @@ -0,0 +1,305 @@ +perf-diff(1) +============ + +NAME +---- +perf-diff - Read perf.data files and display the differential profile + +SYNOPSIS +-------- +[verse] +'perf diff' [baseline file] [data file1] [[data file2] ... ] + +DESCRIPTION +----------- +This command displays the performance difference amongst two or more perf.data +files captured via perf record. + +If no parameters are passed it will assume perf.data.old and perf.data. + +The differential profile is displayed only for events matching both +specified perf.data files. + +If no parameters are passed the samples will be sorted by dso and symbol. +As the perf.data files could come from different binaries, the symbols addresses +could vary. So perf diff is based on the comparison of the files and +symbols name. + +OPTIONS +------- +-D:: +--dump-raw-trace:: + Dump raw trace in ASCII. + +--kallsyms=:: + kallsyms pathname + +-m:: +--modules:: + Load module symbols. WARNING: use only with -k and LIVE kernel + +-d:: +--dsos=:: + Only consider symbols in these dsos. CSV that understands + file://filename entries. This option will affect the percentage + of the Baseline/Delta column. See --percentage for more info. + +-C:: +--comms=:: + Only consider symbols in these comms. CSV that understands + file://filename entries. This option will affect the percentage + of the Baseline/Delta column. See --percentage for more info. + +-S:: +--symbols=:: + Only consider these symbols. CSV that understands + file://filename entries. This option will affect the percentage + of the Baseline/Delta column. See --percentage for more info. + +-s:: +--sort=:: + Sort by key(s): pid, comm, dso, symbol, cpu, parent, srcline. + Please see description of --sort in the perf-report man page. + +-t:: +--field-separator=:: + + Use a special separator character and don't pad with spaces, replacing + all occurrences of this separator in symbol names (and other output) + with a '.' character, that thus it's the only non valid separator. + +-v:: +--verbose:: + Be verbose, for instance, show the raw counts in addition to the + diff. + +-q:: +--quiet:: + Do not show any warnings or messages. (Suppress -v) + +-f:: +--force:: + Don't do ownership validation. + +--symfs=:: + Look for files with symbols relative to this directory. + +-b:: +--baseline-only:: + Show only items with match in baseline. + +-c:: +--compute:: + Differential computation selection - delta, ratio, wdiff, cycles, + delta-abs (default is delta-abs). Default can be changed using + diff.compute config option. See COMPARISON METHODS section for + more info. + +--cycles-hist:: + Report a histogram and the standard deviation for cycles data. + It can help us to judge if the reported cycles data is noisy or + not. This option should be used with '-c cycles'. + +-p:: +--period:: + Show period values for both compared hist entries. + +-F:: +--formula:: + Show formula for given computation. + +-o:: +--order:: + Specify compute sorting column number. 0 means sorting by baseline + overhead and 1 (default) means sorting by computed value of column 1 + (data from the first file other base baseline). Values more than 1 + can be used only if enough data files are provided. + The default value can be set using the diff.order config option. + +--percentage:: + Determine how to display the overhead percentage of filtered entries. + Filters can be applied by --comms, --dsos and/or --symbols options. + + "relative" means it's relative to filtered entries only so that the + sum of shown entries will be always 100%. "absolute" means it retains + the original value before and after the filter is applied. + +--time:: + Analyze samples within given time window. It supports time + percent with multiple time ranges. Time string is 'a%/n,b%/m,...' + or 'a%-b%,c%-%d,...'. + + For example: + + Select the second 10% time slice to diff: + + perf diff --time 10%/2 + + Select from 0% to 10% time slice to diff: + + perf diff --time 0%-10% + + Select the first and the second 10% time slices to diff: + + perf diff --time 10%/1,10%/2 + + Select from 0% to 10% and 30% to 40% slices to diff: + + perf diff --time 0%-10%,30%-40% + + It also supports analyzing samples within a given time window + ,. Times have the format seconds.nanoseconds. If 'start' + is not given (i.e. time string is ',x.y') then analysis starts at + the beginning of the file. If stop time is not given (i.e. time + string is 'x.y,') then analysis goes to the end of the file. + Multiple ranges can be separated by spaces, which requires the argument + to be quoted e.g. --time "1234.567,1234.789 1235," + Time string is'a1.b1,c1.d1:a2.b2,c2.d2'. Use ':' to separate timestamps + for different perf.data files. + + For example, we get the timestamp information from 'perf script'. + + perf script -i perf.data.old + mgen 13940 [000] 3946.361400: ... + + perf script -i perf.data + mgen 13940 [000] 3971.150589 ... + + perf diff --time 3946.361400,:3971.150589, + + It analyzes the perf.data.old from the timestamp 3946.361400 to + the end of perf.data.old and analyzes the perf.data from the + timestamp 3971.150589 to the end of perf.data. + +--cpu:: Only diff samples for the list of CPUs provided. Multiple CPUs can + be provided as a comma-separated list with no space: 0,1. Ranges of + CPUs are specified with -: 0-2. Default is to report samples on all + CPUs. + +--pid=:: + Only diff samples for given process ID (comma separated list). + +--tid=:: + Only diff samples for given thread ID (comma separated list). + +--stream:: + Enable hot streams comparison. Stream can be a callchain which is + aggregated by the branch records from samples. + +COMPARISON +---------- +The comparison is governed by the baseline file. The baseline perf.data +file is iterated for samples. All other perf.data files specified on +the command line are searched for the baseline sample pair. If the pair +is found, specified computation is made and result is displayed. + +All samples from non-baseline perf.data files, that do not match any +baseline entry, are displayed with empty space within baseline column +and possible computation results (delta) in their related column. + +Example files samples: +- file A with samples f1, f2, f3, f4, f6 +- file B with samples f2, f4, f5 +- file C with samples f1, f2, f5 + +Example output: + x - computation takes place for pair + b - baseline sample percentage + +- perf diff A B C + + baseline/A compute/B compute/C samples + --------------------------------------- + b x f1 + b x x f2 + b f3 + b x f4 + b f6 + x x f5 + +- perf diff B A C + + baseline/B compute/A compute/C samples + --------------------------------------- + b x x f2 + b x f4 + b x f5 + x x f1 + x f3 + x f6 + +- perf diff C B A + + baseline/C compute/B compute/A samples + --------------------------------------- + b x f1 + b x x f2 + b x f5 + x f3 + x x f4 + x f6 + +COMPARISON METHODS +------------------ +delta +~~~~~ +If specified the 'Delta' column is displayed with value 'd' computed as: + + d = A->period_percent - B->period_percent + +with: + - A/B being matching hist entry from data/baseline file specified + (or perf.data/perf.data.old) respectively. + + - period_percent being the % of the hist entry period value within + single data file + + - with filtering by -C, -d and/or -S, period_percent might be changed + relative to how entries are filtered. Use --percentage=absolute to + prevent such fluctuation. + +delta-abs +~~~~~~~~~ +Same as 'delta` method, but sort the result with the absolute values. + +ratio +~~~~~ +If specified the 'Ratio' column is displayed with value 'r' computed as: + + r = A->period / B->period + +with: + - A/B being matching hist entry from data/baseline file specified + (or perf.data/perf.data.old) respectively. + + - period being the hist entry period value + +wdiff:WEIGHT-B,WEIGHT-A +~~~~~~~~~~~~~~~~~~~~~~~ +If specified the 'Weighted diff' column is displayed with value 'd' computed as: + + d = B->period * WEIGHT-A - A->period * WEIGHT-B + + - A/B being matching hist entry from data/baseline file specified + (or perf.data/perf.data.old) respectively. + + - period being the hist entry period value + + - WEIGHT-A/WEIGHT-B being user supplied weights in the the '-c' option + behind ':' separator like '-c wdiff:1,2'. + - WEIGHT-A being the weight of the data file + - WEIGHT-B being the weight of the baseline data file + +cycles +~~~~~~ +If specified the '[Program Block Range] Cycles Diff' column is displayed. +It displays the cycles difference of same program basic block amongst +two perf.data. The program basic block is the code between two branches. + +'[Program Block Range]' indicates the range of a program basic block. +Source line is reported if it can be found otherwise uses symbol+offset +instead. + +SEE ALSO +-------- +linkperf:perf-record[1], linkperf:perf-report[1] -- cgit v1.2.3