From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- tools/perf/arch/common.c | 225 +++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 225 insertions(+) create mode 100644 tools/perf/arch/common.c (limited to 'tools/perf/arch/common.c') diff --git a/tools/perf/arch/common.c b/tools/perf/arch/common.c new file mode 100644 index 000000000..59dd875fd --- /dev/null +++ b/tools/perf/arch/common.c @@ -0,0 +1,225 @@ +// SPDX-License-Identifier: GPL-2.0 +#include +#include +#include +#include +#include +#include "common.h" +#include "../util/env.h" +#include "../util/debug.h" +#include + +const char *const arc_triplets[] = { + "arc-linux-", + "arc-snps-linux-uclibc-", + "arc-snps-linux-gnu-", + NULL +}; + +const char *const arm_triplets[] = { + "arm-eabi-", + "arm-linux-androideabi-", + "arm-unknown-linux-", + "arm-unknown-linux-gnu-", + "arm-unknown-linux-gnueabi-", + "arm-linux-gnu-", + "arm-linux-gnueabihf-", + "arm-none-eabi-", + NULL +}; + +const char *const arm64_triplets[] = { + "aarch64-linux-android-", + "aarch64-linux-gnu-", + NULL +}; + +const char *const powerpc_triplets[] = { + "powerpc-unknown-linux-gnu-", + "powerpc-linux-gnu-", + "powerpc64-unknown-linux-gnu-", + "powerpc64-linux-gnu-", + "powerpc64le-linux-gnu-", + NULL +}; + +const char *const s390_triplets[] = { + "s390-ibm-linux-", + "s390x-linux-gnu-", + NULL +}; + +const char *const sh_triplets[] = { + "sh-unknown-linux-gnu-", + "sh64-unknown-linux-gnu-", + "sh-linux-gnu-", + "sh64-linux-gnu-", + NULL +}; + +const char *const sparc_triplets[] = { + "sparc-unknown-linux-gnu-", + "sparc64-unknown-linux-gnu-", + "sparc64-linux-gnu-", + NULL +}; + +const char *const x86_triplets[] = { + "x86_64-pc-linux-gnu-", + "x86_64-unknown-linux-gnu-", + "i686-pc-linux-gnu-", + "i586-pc-linux-gnu-", + "i486-pc-linux-gnu-", + "i386-pc-linux-gnu-", + "i686-linux-android-", + "i686-android-linux-", + "x86_64-linux-gnu-", + "i586-linux-gnu-", + NULL +}; + +const char *const mips_triplets[] = { + "mips-unknown-linux-gnu-", + "mipsel-linux-android-", + "mips-linux-gnu-", + "mips64-linux-gnu-", + "mips64el-linux-gnuabi64-", + "mips64-linux-gnuabi64-", + "mipsel-linux-gnu-", + NULL +}; + +static bool lookup_path(char *name) +{ + bool found = false; + char *path, *tmp = NULL; + char buf[PATH_MAX]; + char *env = getenv("PATH"); + + if (!env) + return false; + + env = strdup(env); + if (!env) + return false; + + path = strtok_r(env, ":", &tmp); + while (path) { + scnprintf(buf, sizeof(buf), "%s/%s", path, name); + if (access(buf, F_OK) == 0) { + found = true; + break; + } + path = strtok_r(NULL, ":", &tmp); + } + free(env); + return found; +} + +static int lookup_triplets(const char *const *triplets, const char *name) +{ + int i; + char buf[PATH_MAX]; + + for (i = 0; triplets[i] != NULL; i++) { + scnprintf(buf, sizeof(buf), "%s%s", triplets[i], name); + if (lookup_path(buf)) + return i; + } + return -1; +} + +static int perf_env__lookup_binutils_path(struct perf_env *env, + const char *name, const char **path) +{ + int idx; + const char *arch = perf_env__arch(env), *cross_env; + const char *const *path_list; + char *buf = NULL; + + /* + * We don't need to try to find objdump path for native system. + * Just use default binutils path (e.g.: "objdump"). + */ + if (!strcmp(perf_env__arch(NULL), arch)) + goto out; + + cross_env = getenv("CROSS_COMPILE"); + if (cross_env) { + if (asprintf(&buf, "%s%s", cross_env, name) < 0) + goto out_error; + if (buf[0] == '/') { + if (access(buf, F_OK) == 0) + goto out; + goto out_error; + } + if (lookup_path(buf)) + goto out; + zfree(&buf); + } + + if (!strcmp(arch, "arc")) + path_list = arc_triplets; + else if (!strcmp(arch, "arm")) + path_list = arm_triplets; + else if (!strcmp(arch, "arm64")) + path_list = arm64_triplets; + else if (!strcmp(arch, "powerpc")) + path_list = powerpc_triplets; + else if (!strcmp(arch, "sh")) + path_list = sh_triplets; + else if (!strcmp(arch, "s390")) + path_list = s390_triplets; + else if (!strcmp(arch, "sparc")) + path_list = sparc_triplets; + else if (!strcmp(arch, "x86")) + path_list = x86_triplets; + else if (!strcmp(arch, "mips")) + path_list = mips_triplets; + else { + ui__error("binutils for %s not supported.\n", arch); + goto out_error; + } + + idx = lookup_triplets(path_list, name); + if (idx < 0) { + ui__error("Please install %s for %s.\n" + "You can add it to PATH, set CROSS_COMPILE or " + "override the default using --%s.\n", + name, arch, name); + goto out_error; + } + + if (asprintf(&buf, "%s%s", path_list[idx], name) < 0) + goto out_error; + +out: + *path = buf; + return 0; +out_error: + free(buf); + *path = NULL; + return -1; +} + +int perf_env__lookup_objdump(struct perf_env *env, const char **path) +{ + /* + * For live mode, env->arch will be NULL and we can use + * the native objdump tool. + */ + if (env->arch == NULL) + return 0; + + return perf_env__lookup_binutils_path(env, "objdump", path); +} + +/* + * Some architectures have a single address space for kernel and user addresses, + * which makes it possible to determine if an address is in kernel space or user + * space. + */ +bool perf_env__single_address_space(struct perf_env *env) +{ + return strcmp(perf_env__arch(env), "sparc"); +} -- cgit v1.2.3