From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- tools/perf/arch/s390/annotate/instructions.c | 174 +++++++++++++++++++++++++++ 1 file changed, 174 insertions(+) create mode 100644 tools/perf/arch/s390/annotate/instructions.c (limited to 'tools/perf/arch/s390/annotate/instructions.c') diff --git a/tools/perf/arch/s390/annotate/instructions.c b/tools/perf/arch/s390/annotate/instructions.c new file mode 100644 index 000000000..0e1366306 --- /dev/null +++ b/tools/perf/arch/s390/annotate/instructions.c @@ -0,0 +1,174 @@ +// SPDX-License-Identifier: GPL-2.0 +#include + +static int s390_call__parse(struct arch *arch, struct ins_operands *ops, + struct map_symbol *ms) +{ + char *endptr, *tok, *name; + struct map *map = ms->map; + struct addr_map_symbol target = { + .ms = { .map = map, }, + }; + + tok = strchr(ops->raw, ','); + if (!tok) + return -1; + + ops->target.addr = strtoull(tok + 1, &endptr, 16); + + name = strchr(endptr, '<'); + if (name == NULL) + return -1; + + name++; + + if (arch->objdump.skip_functions_char && + strchr(name, arch->objdump.skip_functions_char)) + return -1; + + tok = strchr(name, '>'); + if (tok == NULL) + return -1; + + *tok = '\0'; + ops->target.name = strdup(name); + *tok = '>'; + + if (ops->target.name == NULL) + return -1; + target.addr = map__objdump_2mem(map, ops->target.addr); + + if (maps__find_ams(ms->maps, &target) == 0 && + map__rip_2objdump(target.ms.map, map->map_ip(target.ms.map, target.addr)) == ops->target.addr) + ops->target.sym = target.ms.sym; + + return 0; +} + +static int call__scnprintf(struct ins *ins, char *bf, size_t size, + struct ins_operands *ops, int max_ins_name); + +static struct ins_ops s390_call_ops = { + .parse = s390_call__parse, + .scnprintf = call__scnprintf, +}; + +static int s390_mov__parse(struct arch *arch __maybe_unused, + struct ins_operands *ops, + struct map_symbol *ms __maybe_unused) +{ + char *s = strchr(ops->raw, ','), *target, *endptr; + + if (s == NULL) + return -1; + + *s = '\0'; + ops->source.raw = strdup(ops->raw); + *s = ','; + + if (ops->source.raw == NULL) + return -1; + + target = ++s; + ops->target.raw = strdup(target); + if (ops->target.raw == NULL) + goto out_free_source; + + ops->target.addr = strtoull(target, &endptr, 16); + if (endptr == target) + goto out_free_target; + + s = strchr(endptr, '<'); + if (s == NULL) + goto out_free_target; + endptr = strchr(s + 1, '>'); + if (endptr == NULL) + goto out_free_target; + + *endptr = '\0'; + ops->target.name = strdup(s + 1); + *endptr = '>'; + if (ops->target.name == NULL) + goto out_free_target; + + return 0; + +out_free_target: + zfree(&ops->target.raw); +out_free_source: + zfree(&ops->source.raw); + return -1; +} + + +static struct ins_ops s390_mov_ops = { + .parse = s390_mov__parse, + .scnprintf = mov__scnprintf, +}; + +static struct ins_ops *s390__associate_ins_ops(struct arch *arch, const char *name) +{ + struct ins_ops *ops = NULL; + + /* catch all kind of jumps */ + if (strchr(name, 'j') || + !strncmp(name, "bct", 3) || + !strncmp(name, "br", 2)) + ops = &jump_ops; + /* override call/returns */ + if (!strcmp(name, "bras") || + !strcmp(name, "brasl") || + !strcmp(name, "basr")) + ops = &s390_call_ops; + if (!strcmp(name, "br")) + ops = &ret_ops; + /* override load/store relative to PC */ + if (!strcmp(name, "lrl") || + !strcmp(name, "lgrl") || + !strcmp(name, "lgfrl") || + !strcmp(name, "llgfrl") || + !strcmp(name, "strl") || + !strcmp(name, "stgrl")) + ops = &s390_mov_ops; + + if (ops) + arch__associate_ins_ops(arch, name, ops); + return ops; +} + +static int s390__cpuid_parse(struct arch *arch, char *cpuid) +{ + unsigned int family; + char model[16], model_c[16], cpumf_v[16], cpumf_a[16]; + int ret; + + /* + * cpuid string format: + * "IBM,family,model-capacity,model[,cpum_cf-version,cpum_cf-authorization]" + */ + ret = sscanf(cpuid, "%*[^,],%u,%[^,],%[^,],%[^,],%s", &family, model_c, + model, cpumf_v, cpumf_a); + if (ret >= 2) { + arch->family = family; + arch->model = 0; + return 0; + } + + return -1; +} + +static int s390__annotate_init(struct arch *arch, char *cpuid __maybe_unused) +{ + int err = 0; + + if (!arch->initialized) { + arch->initialized = true; + arch->associate_instruction_ops = s390__associate_ins_ops; + if (cpuid) { + if (s390__cpuid_parse(arch, cpuid)) + err = SYMBOL_ANNOTATE_ERRNO__ARCH_INIT_CPUID_PARSING; + } + } + + return err; +} -- cgit v1.2.3