From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- tools/perf/include/perf/perf_dlfilter.h | 158 ++++++++++++++++++++++++++++++++ 1 file changed, 158 insertions(+) create mode 100644 tools/perf/include/perf/perf_dlfilter.h (limited to 'tools/perf/include') diff --git a/tools/perf/include/perf/perf_dlfilter.h b/tools/perf/include/perf/perf_dlfilter.h new file mode 100644 index 000000000..a26e2f129 --- /dev/null +++ b/tools/perf/include/perf/perf_dlfilter.h @@ -0,0 +1,158 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * perf_dlfilter.h: API for perf --dlfilter shared object + * Copyright (c) 2021, Intel Corporation. + */ +#ifndef _LINUX_PERF_DLFILTER_H +#define _LINUX_PERF_DLFILTER_H + +#include +#include + +/* + * The following macro can be used to determine if this header defines + * perf_dlfilter_sample machine_pid and vcpu. + */ +#define PERF_DLFILTER_HAS_MACHINE_PID + +/* Definitions for perf_dlfilter_sample flags */ +enum { + PERF_DLFILTER_FLAG_BRANCH = 1ULL << 0, + PERF_DLFILTER_FLAG_CALL = 1ULL << 1, + PERF_DLFILTER_FLAG_RETURN = 1ULL << 2, + PERF_DLFILTER_FLAG_CONDITIONAL = 1ULL << 3, + PERF_DLFILTER_FLAG_SYSCALLRET = 1ULL << 4, + PERF_DLFILTER_FLAG_ASYNC = 1ULL << 5, + PERF_DLFILTER_FLAG_INTERRUPT = 1ULL << 6, + PERF_DLFILTER_FLAG_TX_ABORT = 1ULL << 7, + PERF_DLFILTER_FLAG_TRACE_BEGIN = 1ULL << 8, + PERF_DLFILTER_FLAG_TRACE_END = 1ULL << 9, + PERF_DLFILTER_FLAG_IN_TX = 1ULL << 10, + PERF_DLFILTER_FLAG_VMENTRY = 1ULL << 11, + PERF_DLFILTER_FLAG_VMEXIT = 1ULL << 12, +}; + +/* + * perf sample event information (as per perf script and ) + */ +struct perf_dlfilter_sample { + __u32 size; /* Size of this structure (for compatibility checking) */ + __u16 ins_lat; /* Refer PERF_SAMPLE_WEIGHT_TYPE in */ + __u16 p_stage_cyc; /* Refer PERF_SAMPLE_WEIGHT_TYPE in */ + __u64 ip; + __s32 pid; + __s32 tid; + __u64 time; + __u64 addr; + __u64 id; + __u64 stream_id; + __u64 period; + __u64 weight; /* Refer PERF_SAMPLE_WEIGHT_TYPE in */ + __u64 transaction; /* Refer PERF_SAMPLE_TRANSACTION in */ + __u64 insn_cnt; /* For instructions-per-cycle (IPC) */ + __u64 cyc_cnt; /* For instructions-per-cycle (IPC) */ + __s32 cpu; + __u32 flags; /* Refer PERF_DLFILTER_FLAG_* above */ + __u64 data_src; /* Refer PERF_SAMPLE_DATA_SRC in */ + __u64 phys_addr; /* Refer PERF_SAMPLE_PHYS_ADDR in */ + __u64 data_page_size; /* Refer PERF_SAMPLE_DATA_PAGE_SIZE in */ + __u64 code_page_size; /* Refer PERF_SAMPLE_CODE_PAGE_SIZE in */ + __u64 cgroup; /* Refer PERF_SAMPLE_CGROUP in */ + __u8 cpumode; /* Refer CPUMODE_MASK etc in */ + __u8 addr_correlates_sym; /* True => resolve_addr() can be called */ + __u16 misc; /* Refer perf_event_header in */ + __u32 raw_size; /* Refer PERF_SAMPLE_RAW in */ + const void *raw_data; /* Refer PERF_SAMPLE_RAW in */ + __u64 brstack_nr; /* Number of brstack entries */ + const struct perf_branch_entry *brstack; /* Refer */ + __u64 raw_callchain_nr; /* Number of raw_callchain entries */ + const __u64 *raw_callchain; /* Refer */ + const char *event; + __s32 machine_pid; + __s32 vcpu; +}; + +/* + * Address location (as per perf script) + */ +struct perf_dlfilter_al { + __u32 size; /* Size of this structure (for compatibility checking) */ + __u32 symoff; + const char *sym; + __u64 addr; /* Mapped address (from dso) */ + __u64 sym_start; + __u64 sym_end; + const char *dso; + __u8 sym_binding; /* STB_LOCAL, STB_GLOBAL or STB_WEAK, refer */ + __u8 is_64_bit; /* Only valid if dso is not NULL */ + __u8 is_kernel_ip; /* True if in kernel space */ + __u32 buildid_size; + __u8 *buildid; + /* Below members are only populated by resolve_ip() */ + __u8 filtered; /* True if this sample event will be filtered out */ + const char *comm; +}; + +struct perf_dlfilter_fns { + /* Return information about ip */ + const struct perf_dlfilter_al *(*resolve_ip)(void *ctx); + /* Return information about addr (if addr_correlates_sym) */ + const struct perf_dlfilter_al *(*resolve_addr)(void *ctx); + /* Return arguments from --dlarg option */ + char **(*args)(void *ctx, int *dlargc); + /* + * Return information about address (al->size must be set before + * calling). Returns 0 on success, -1 otherwise. + */ + __s32 (*resolve_address)(void *ctx, __u64 address, struct perf_dlfilter_al *al); + /* Return instruction bytes and length */ + const __u8 *(*insn)(void *ctx, __u32 *length); + /* Return source file name and line number */ + const char *(*srcline)(void *ctx, __u32 *line_number); + /* Return perf_event_attr, refer */ + struct perf_event_attr *(*attr)(void *ctx); + /* Read object code, return numbers of bytes read */ + __s32 (*object_code)(void *ctx, __u64 ip, void *buf, __u32 len); + /* Reserved */ + void *(*reserved[120])(void *); +}; + +/* + * If implemented, 'start' will be called at the beginning, + * before any calls to 'filter_event'. Return 0 to indicate success, + * or return a negative error code. '*data' can be assigned for use + * by other functions. 'ctx' is needed for calls to perf_dlfilter_fns, + * but most perf_dlfilter_fns are not valid when called from 'start'. + */ +int start(void **data, void *ctx); + +/* + * If implemented, 'stop' will be called at the end, + * after any calls to 'filter_event'. Return 0 to indicate success, or + * return a negative error code. 'data' is set by start(). 'ctx' is + * needed for calls to perf_dlfilter_fns, but most perf_dlfilter_fns + * are not valid when called from 'stop'. + */ +int stop(void *data, void *ctx); + +/* + * If implemented, 'filter_event' will be called for each sample + * event. Return 0 to keep the sample event, 1 to filter it out, or + * return a negative error code. 'data' is set by start(). 'ctx' is + * needed for calls to perf_dlfilter_fns. + */ +int filter_event(void *data, const struct perf_dlfilter_sample *sample, void *ctx); + +/* + * The same as 'filter_event' except it is called before internal + * filtering. + */ +int filter_event_early(void *data, const struct perf_dlfilter_sample *sample, void *ctx); + +/* + * If implemented, return a one-line description of the filter, and optionally + * a longer description. + */ +const char *filter_description(const char **long_description); + +#endif -- cgit v1.2.3