From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- tools/perf/pmu-events/README | 152 +++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 152 insertions(+) create mode 100644 tools/perf/pmu-events/README (limited to 'tools/perf/pmu-events/README') diff --git a/tools/perf/pmu-events/README b/tools/perf/pmu-events/README new file mode 100644 index 000000000..de7efa2ce --- /dev/null +++ b/tools/perf/pmu-events/README @@ -0,0 +1,152 @@ + +The contents of this directory allow users to specify PMU events in their +CPUs by their symbolic names rather than raw event codes (see example below). + +The main program in this directory, is the 'jevents', which is built and +executed _BEFORE_ the perf binary itself is built. + +The 'jevents' program tries to locate and process JSON files in the directory +tree tools/perf/pmu-events/arch/foo. + + - Regular files with '.json' extension in the name are assumed to be + JSON files, each of which describes a set of PMU events. + + - The CSV file that maps a specific CPU to its set of PMU events is to + be named 'mapfile.csv' (see below for mapfile format). + + - Directories are traversed, but all other files are ignored. + + - To reduce JSON event duplication per architecture, platform JSONs may + use "ArchStdEvent" keyword to dereference an "Architecture standard + events", defined in architecture standard JSONs. + Architecture standard JSONs must be located in the architecture root + folder. Matching is based on the "EventName" field. + +The PMU events supported by a CPU model are expected to grouped into topics +such as Pipelining, Cache, Memory, Floating-point etc. All events for a topic +should be placed in a separate JSON file - where the file name identifies +the topic. Eg: "Floating-point.json". + +All the topic JSON files for a CPU model/family should be in a separate +sub directory. Thus for the Silvermont X86 CPU: + + $ ls tools/perf/pmu-events/arch/x86/silvermont + cache.json memory.json virtual-memory.json + frontend.json pipeline.json + +The JSONs folder for a CPU model/family may be placed in the root arch +folder, or may be placed in a vendor sub-folder under the arch folder +for instances where the arch and vendor are not the same. + +Using the JSON files and the mapfile, 'jevents' generates the C source file, +'pmu-events.c', which encodes the two sets of tables: + + - Set of 'PMU events tables' for all known CPUs in the architecture, + (one table like the following, per JSON file; table name 'pme_power8' + is derived from JSON file name, 'power8.json'). + + struct pmu_event pme_power8[] = { + + ... + + { + .name = "pm_1plus_ppc_cmpl", + .event = "event=0x100f2", + .desc = "1 or more ppc insts finished,", + }, + + ... + } + + - A 'mapping table' that maps each CPU of the architecture, to its + 'PMU events table' + + struct pmu_events_map pmu_events_map[] = { + { + .cpuid = "004b0000", + .version = "1", + .type = "core", + .table = pme_power8 + }, + ... + + }; + +After the 'pmu-events.c' is generated, it is compiled and the resulting +'pmu-events.o' is added to 'libperf.a' which is then used to build perf. + +NOTES: + 1. Several CPUs can support same set of events and hence use a common + JSON file. Hence several entries in the pmu_events_map[] could map + to a single 'PMU events table'. + + 2. The 'pmu-events.h' has an extern declaration for the mapping table + and the generated 'pmu-events.c' defines this table. + + 3. _All_ known CPU tables for architecture are included in the perf + binary. + +At run time, perf determines the actual CPU it is running on, finds the +matching events table and builds aliases for those events. This allows +users to specify events by their name: + + $ perf stat -e pm_1plus_ppc_cmpl sleep 1 + +where 'pm_1plus_ppc_cmpl' is a Power8 PMU event. + +However some errors in processing may cause the alias build to fail. + +Mapfile format +=============== + +The mapfile enables multiple CPU models to share a single set of PMU events. +It is required even if such mapping is 1:1. + +The mapfile.csv format is expected to be: + + Header line + CPUID,Version,Dir/path/name,Type + +where: + + Comma: + is the required field delimiter (i.e other fields cannot + have commas within them). + + Comments: + Lines in which the first character is either '\n' or '#' + are ignored. + + Header line + The header line is the first line in the file, which is + always _IGNORED_. It can be empty. + + CPUID: + CPUID is an arch-specific char string, that can be used + to identify CPU (and associate it with a set of PMU events + it supports). Multiple CPUIDS can point to the same + File/path/name.json. + + Example: + CPUID == 'GenuineIntel-6-2E' (on x86). + CPUID == '004b0100' (PVR value in Powerpc) + Version: + is the Version of the mapfile. + + Dir/path/name: + is the pathname to the directory containing the CPU's JSON + files, relative to the directory containing the mapfile.csv + + Type: + indicates whether the events are "core" or "uncore" events. + + + Eg: + + $ grep silvermont tools/perf/pmu-events/arch/x86/mapfile.csv + GenuineIntel-6-37,v13,silvermont,core + GenuineIntel-6-4D,v13,silvermont,core + GenuineIntel-6-4C,v13,silvermont,core + + i.e the three CPU models use the JSON files (i.e PMU events) listed + in the directory 'tools/perf/pmu-events/arch/x86/silvermont'. -- cgit v1.2.3